A bracket design for garage door sensor

$30-250 USD

Lukket

Slået op

over 4 år siden

$30-250 USD

Betales ved levering

This project is for design a bracket which will be used to install average garage door sensor. The sensor and the magnet size are dynamic and so the bracket should make such a way where any sensor size up to 1” - 3” in length can be used. There should be option for the adjustment to position the sensor. The goal is, once sensor and the magnet is placed; the sensor and the magnet are parallel to each other when the door is closed and when the door is closed the gap between the sensor and magnet cannot be more than 0.5” - 1.5” inches. This gap between the sensor and magnet must be adjustable. It is important to point out that the distance between sensor and the magnet must not change as the door will go up and down due to everyday use and they must always stay parallel, otherwise sensor will not work properly. The bracket may be made of hard plastic or/and metal. The bracket can be made for one or two doors sensors. If the same bracket can be used for two sensors for two doors, that can be mount on the wall between two doors. By the way, this project only for the US since I am looking the bracket to work for US car garages. If you are interested please contact me ASAP due to time constrain. We have a very short time to get this project completed. Please send your prior work example similar to this work so I can review it and make a quick decision. If you have any question let me know.

Projekt-ID: 21046294

Om projektet

27 forslag

Projekt på afstand

Aktiv 5 år siden

Leder du efter muligheder for at tjene penge?

Emailadresse

Fordele ved budafgivning på Freelancer

Fastsæt dit budget og din tidsramme

Bliv betalt for dit arbejde

Oprids dit forslag

Det er gratis at skrive sig op og byde på jobs

27 freelancere byder i gennemsnit $188 USD på dette job

@ashrafshekh

Hello, ⭐Dear Employer⭐ Greetings of the day, I have gone through the description & found interesting. I have done many project related to mechanical engineering, 3D modelling, product designing, any kind of simulation, MATLAB, design analysis. I am a professional member here and a full time freelancer, so you can contact me anytime. to brief about me: I am mechanical design engineer by profession and graduate in mechanical engineering with PG in CAD/CAM, ANSYS & Solidworks. I can perform almost all kind of simulation like CFD, FEA, structural analysis etc. I have expertise in many design tools like solidworks, CATIA, ANSYS, Staadpro, 3DMax, Creo MATLAB etc. As i have engineering background with Nine years of industrial experience and very confident about any project related to mechanical engineering field. I have ⭐"Preferred Freelancer Badge"⭐, you can see next to my profile name. You can check my profile and portfolio:- https://www.freelancer.com/u/ashrafshekh.html My bid is negotiable and it depends on the required deliverable. Looking forward to hear from you & feel free to contact me Thanks & regards Ashraf Shaikh

$400 USD på 7 dage

4,9

(106 anmeldelser)

7,7

@nijiworks

Hello, We are a Turkey based company and we offer product design & development, electronic schematic & PCB design, plastic injection molding and mass production services to our customers. We can help you to design and manufacture your product. Please contact me to talk more about your project. Best Regards Ates Gokdemir Nijiworks Nothing is impossible, just imagine!

$1.000 USD på 20 dage

5,0

(89 anmeldelser)

7,6

@pankajp12345

Hello ! Please share any drawing/sketch that you have for this. I can provide you proper 3d cad model as you need with proper adjustment mechanism. Any details and files that you share will not be disclosed to any one. If you want to check my reviews please check this link: https://www.freelancer.com/u/pankajp12345 Skills: Mechanical Engineering, Solidworks, Autocad, Fusion 360, Catia, Inventor, Ansys, Keyshot Bid quote depends on project work, we will discuss it when you share details.

$30 USD på 7 dage

5,0

(229 anmeldelser)

7,0

@abushahama

Hi there, My name is Abu Shahama. I’ve read your brief and can see that you’d like to design a bracket for the door. I can provide 3D CAD model, manufacturing drawing, 3D renders. My team has 7 years of experience in product designing and manufacturing engineering. I can use SolidWorks to design this door bracket. Kindly visit my portfolio page for the similar projects completed by us:- https://www.freelancer.com/u/abushahama

$150 USD på 4 dage

4,9

(141 anmeldelser)

6,9

@ramyhelmy

I am a registered mechanical / structurer engineer in Australia with more than 14 years of experience in CAD, mechanical engineering, FEA, Solidworks, and product design

$140 USD på 7 dage

5,0

(75 anmeldelser)

6,9

@graphicsexpert07

Hi, After reading your job description, I would be able to provide you some great logo ideas. I always maintain Logo Design Principal, Color Theory, Typography, Visual Interaction for remarkable Logo. Never will give any copyright design. The design will be completed in 24hours No additional cost for unlimited revisions I agree with your payment and able to start work right now. Before taking a decision please check some of my previous work The files format you will get like AI, EPS, SVG, PDF, and also PSD, PNG, and JPG. So you can do any changes or add in the future by your self. Thank you Md Helal

$100 USD på 7 dage

4,9

(186 anmeldelser)

6,7

@A5Alberto

Hello, good day. I have a company called DOMO Integral Solutions. We are a multidisciplinary team that can contribute and gives support to you at any time you may need. We have a specialized mechanical and design area that can fill your needs. Almost 20 years of experience in Mexico. The main software we use to manage is SolidWorks, AutoCAD, CATIA5, and ANSYS. However, if you need some other software we could find a way to get it to can give you the support. My main experience is mechanics, manufacture, and materials (3D CAD Design Included). Regarding availability, I can start to give you support immediately. However, we can manage to assign you more resources if you needed. Do not hesitate to get in contact with me to share more information. Regards. Alberto de Jesús Castañeda Rodríguez DOMO Integral Solutions

$120 USD på 2 dage

5,0

(2 anmeldelser)

5,8

@schoudhary1553

Hello, I have gone through your job posting and become very much interested to work with you. I am an expert in this field. I have already completed several projects like this. For evidence you can see my profile. Please visit : https://www.freelancer.com/u/schoudhary1553 I have excellent command over English. I am a hard worker, productive and worthy of your attention I hope, I would be the right candidate for this post. Awaiting an affirmative response from you. Kinds Regards, Sandeep

$250 USD på 5 dage

4,8

(25 anmeldelser)

5,7

@dedierwanto2686

Hi there,i am interested with your project,i can help you for make braket for your door sensor,breket can be made from plastic or sheet metal,please let me know your sensor,i very happy if can help you,i wait your replay,thanks Dedy.e

$75 USD på 1 dag

4,7

(62 anmeldelser)

5,6

@abhayky93

Hello, I saw your project description carefully, I can help you. I have several years of experience in product designing. especially in AutoCAD and Solidworks. I have worked as a design engineer in a few firms and have handled many outsourced projects. I will provide you my best results. Please discuss your project, Hope we will work together, Thank you.

$70 USD på 7 dage

4,8

(78 anmeldelser)

5,6

@dinesh89kang

hello sir my name is dinesh Kumar. I am professional 3d modeling and 3d animation artist. I have read your job description and I can do this job very well.

$150 USD på 3 dage

4,8

(15 anmeldelser)

5,0

@gpejkovic

I am mechanical engineer (MSc) and I have about 16 years of experience in similar jobs. I did work in Automotive Industry and about six months I did draw the parts for filling and packaging machines. I did make many production drawings for parts and assemblies. I was involved in design, construction, prototyping and serial production. As a freelancer, I have done many jobs like this is, but on other website. I prefer to work in Catia, AutoCAD, Inventor and SolidWorks. If you give me a chance to show my abilities, I'll provide you the best service for you and each job I guarantee

$80 USD på 3 dage

5,0

(18 anmeldelser)

4,7

@bassemzamel

Hi, I'm a Expert SolidWorks Designer (Certified SolidWorks Expert) working since 2012 as a SolidWorks Teaching Assistant at the American University in Cairo. I have extensive experience with SolidWorks and I can do very professional work for you in short time. Please check my portfolio on my profile. Thanks

$100 USD på 2 dage

5,0

(28 anmeldelser)

4,8

@Is88

Hi, Im a Mechanical Engineer who is an innovation engineer where i do all design works of the new products. First i do all the calculations manually and design the product in solid works with the design parameters. Then i generate all the fabrication drawings through AUTOCAD. I can provide samples for my previous innovations and solid work models of those designs. Let the professionals deal with this. Thanks

$100 USD på 1 dag

5,0

(8 anmeldelser)

3,0

@kursatbinbas

Hello my name is Kürşat. I am a mechanical engineer (master science student) and I have been designing custom machineries for more than 3 years. And I have been using solidworks for more than 6 years. Have a nice day. Please don't hesitate to contact me if you have any questions. I could also sent some of my projects for reference.

$110 USD på 7 dage

0,0

(0 anmeldelser)

0,0

@ravindrasutar

we design best ...as per my knowledge. I handled lots of project in my career. if you interested to please call me

$111 USD på 15 dage

0,0

(0 anmeldelser)

0,0

@lapritsingh

I am a Solidworks designer . for information about my work check my profile or portfolio.................

$110 USD på 7 dage

0,0

(0 anmeldelser)

0,0

@crescent19

hello sir how are u?? I have gone through all of your requirements and from past 2 years i am working in the field of the product development and research and development in the aerospace industry. So i have played a lot with the sensors mounting so its not new job for me. looking forward two work with you...!!!

$110 USD på 7 dage

0,0

(0 anmeldelser)

0,0

@shubhamwalke

I can do cad modelling and manufacturing drawings for product or parts. Please the details of project. Thank you. Waiting for your reply. Reply with your mail id for sending my portfolio

$555 USD på 7 dage

0,0

(0 anmeldelser)

0,0

@mjremenar

I have over 30 years of product design experience. I have done many bracket designs in an automotive environment. I have a SolidWorks 2019 license. My profile can be viewed on LinkedIn.

$250 USD på 7 dage