Nextion arduino commandsJobs

I need a bold and eye-catching design for a brochure that primarily informs potential customers about the variety of steel products my business offers. Aesthetically, the...a bold and eye-catching design for a brochure that primarily informs potential customers about the variety of steel products my business offers. Aesthetically, the design must stand out yet clearly present the detailed variety of our range. Key requirements include: - Ability to creatively highlight the diverse range of our steel products - Development of a distinct, strong visual style that commands attention - Expertise in brochure design with an understanding of print-ready formats Skills required: - Strong graphic design skills - Experience in brochure design - Proficiency in Adobe Creative Suite or similar...

I am looking for a freelancer who is experienced in embedded code, specifically Arduino. I have a specific project in mind that requires the use of embedded code. Skills and Experience Required: - Proficiency in Arduino programming - Strong knowledge of embedded code development - Experience in working on projects involving Arduino and RS485 Modbus protocol Refer the datasheet attached if needed The purpose of the project is not specified.

I'm in need of an Arduino-based relay switch that can operate multiple circuits serially. The purpose of this project is to start lights in a serial fashion, using physical buttons. Key Requirements: - Build a reliable relay switch: The switch should be able to handle automation for up to 15 relays. - Physical Button Interface: The relay switch must be operable via physical buttons for a user-friendly experience - specially to set adjust time delay between the serial switching Ideal Skills: - Arduino Programming: Experience in programming Arduino to build relay switches. - Circuit Design: Proficiency in designing circuits for handling multiple appliances. - Remote Control Systems: Knowledge in implementing remote control systems for automated appliances. - User ...

I'm looking for a freelancer who is proficient in using the Proteus Design Suite for an intermediate-level simulation project involving an Arduino microcontroller. Key Requirements: - Proficiency with Proteus Design Suite: The ideal candidate should have prior experience in creating and executing simulations using this platform. - Intermediate-Level Microcontroller Simulation: The project involves simulating an Arduino microcontroller which requires a good grasp of microcontroller programming and circuits. - Attention to Detail: The successful freelancer will need to ensure high accuracy in the simulation results. - Timely Delivery: The project has a set timeline, which the freelancer should adhere to strictly.

I'm looking for a freelancer who can use their extensive AI knowledge to develop an agent for our electric bicycles at Nexzu Mobility Limited. This project will require the AI to have several competencies including: - The ability to operate with voice commands - Smart navigation capabilities - Advanced safety features This project will be a remote position and will require compatibility across multiple platforms: iOS, Android, and Web. You should have experience with several AI technologies and frameworks, ideally TensorFlow, PyTorch, and OpenAI. A strong understanding and demonstrated experience in these areas will ensure the development and implementation of a high-quality AI agent that improves the safety and efficiency of our electric bicycles, enhancing the user experie...

For my recent short book about utilizing Arduino, I need proficient help with enhancing the aesthetics and formatting of the text. The ultimate goal is to turn my raw material into a print-ready layout while ensuring it matches my preference for a modern and clean style. Final format needs to be one that I can easily edit. Style reference: Makezine (make magazine) books or Hackspace magazine. Key tasks for this project: • Develop diverse page layouts to maintain reader engagement. • Incorporate placeholders for pictures to enrich the content visually. • Include placeholders for elements like flow diagrams and illustrations to support the text. Ideal candidate: An ideal candidate for this position will have considerable experience in book layout design, especi...

Description: I am seeking a skilled freelancer with experience in electronics, Motor Control through Pulse/Step & Direction, Arduino, and servomotors and their drivers to assist me in implementing the basic control for reliable operation. The primary focus will be on the electronics aspect of the project. The motor in question is a "T6 Series 750W AC Servo Motor" (see link: ) which is intended to be controlled using an Arduino Portenta H7. What I Require: - Development of an appropriate circuit diagram compatible with the motor driver and Arduino. - Selection of the required components. - Configuration settings including pulse widths, pulse formats, etc.

...freelancer to provide a introduction Ubuntu 22.04 Linux course focusing primarily on: ( I need to present this to 10 technicians who use linux based systems daily) Each attendee will have access to a Live image Ubuntu Machine to work with) - Basic system administration - Remote access solutions such as SSH, Telnet, Minicom - Essential usage instructions for a selection of beneficial command line commands, covering at least cp, scp, vi, cat, See attached for basic framework of minimum requirements. Each command must be given with samples of how it is used. Urgency is key in this project, as I require the completion of the course as soon as possible (maximum 1 week from now). Candidates with deep Ubuntu knowledge, impressively agile teaching methods, and a penchant for effectiv...

Vær venlig at Tilmelde dig eller Log ind for at se detaljer.

I am looking for a skilled developer to create a control app for a thermal camera. The app should be developed for the Windows platform based on supplied SDKs, but will need to communicate wirelessly via radio link, using Arduino. The premise is that we will be able to have camera control over a wireless link (end goal is to mount the camera on a drone). We need to control focus, image camera, video start/stop and some other functions. Hardware is based on Lattepanda Alpha (integrated Arduino processor). Windows 10 OS. Receiver is SBUS. More information on SDKs can be provided upon request. Due to the timeframe, we are looking for developers on same or similar timezone to UK.

I'm in need of an experienced Arduino developer to create a custom software for my industrial machine. The software should mainly focus on data logging and controlling the machine's sequences. Key Requirements: - The software must log the machine's operation data onto an SD card. This data should be easily accessible and able to be downloaded for further analysis. - The Arduino software needs to control the sequential operations of this industrial machine. This involves managing the input and output signals, and ensuring a timely and accurate execution of the machine's functions. Ideal Skills and Experience: - Proficient in developing Arduino software. Knowledge of both sensor data collection and actuator control is a plus. - Prior experience in p...

I am seeking a proficient tech freelancer with skills and experience in working with Nextion Intelligent series HMI and Arduino Nano in combination. The aim of this project is to create a calculation and display system, primarily based on timer measurements and pre-stored factors. Skills and Experience: - Strong understanding of Nextion HMI and Arduino Nano - Experience handling calculations and display systems Project Tasks: - Develop a system using Arduino Nano for accurate timing - Implement calculations based on timer measurements and stored factors - Display results on Nextion Intelligent series HMI This project does not involve processing of sensor data, business metrics. The focus is on timer measurements and stored factors to calcul...

The project consists of the design of number 2 PCBs. The first PCB named A is a breakout board for Arduino Mega and Giga, with a maximum size of 140x120 mm. The second PCB named B is a small board and it connects to PCB A with a flat cable, the size is not defined. In the PCBs there are JST HX - 2.54 or standard pin connectors, mosfets for power outputs, two A4988 modules to control 2 stepper motors and two DRV8833 modules to control 4 DC motors, there is also a 1W LED controlled by one of mosfets. The motor modules and mosfets must be equipped with jumpers to select the 5 or 12 volt power supply. Not all mosfets need to be controlled by pwm pins. All digital inputs must include a 10k ohm resistor, but with the possibility of excluding it. There are also digital and analog inputs, ...

I'm in need of a professional to help me design and write firmware for a hoverboard. I want to write hack frimware and allow me to control from arduino or controler i need help using team view / remote control

...Can you give me some good project ideas? A: Making a wrapper around our API for your favorite language is always a good idea, especially if your favorite language is not at the top of the mainstream language list. Mobile weather apps can be interesting, especially if you plan on continuing development beyond this project. Simple embedded projects on platforms such as Raspberry Pi or Arduino are also fun. Visualizations are nice either on a webpage or in a language such as R. Finally, any project with AI in the description is almost certain to be selected. • Q: How many projects will you accept in total? A: We plan to accept as many reasonable submissions as we receive up to 100 total. What else should I know? • Do not submit a bid for any amount o...

Seeking a professional with extensive knowledge in Arduino programming for creating a firmware for STM chips in stm32duino or superior, optimized for ESP32, aimed at reading data from NFC tags. The perfect candidate should display: - Proficiency in Arduino - Familiarity with ST25R3911 NFC chipsets and NFC tag operations - Previous experience programming firmware for STM chips - Understanding of data reading process Your responsibility will be to design, develop and test the firmware ensuring the functionality of reading data from NFC tags is seamless and efficient.

...in need of a video player specifically designed for Android, to be used on Meta Quest 2 and 3. The player must support a range of video formats such as MP4, AVI, MOV, and WEBM. It should possess the following additional features: - Playback controls: The player should allow basic playback functionalities like play, pause, stop, fast-forward, rewind, etc. - Control by commands from PC: The player must be controllable via commands sent from a PC. - Playback in 3D mode: The player should support 3D modes like side-by-side (SBS) and over/under. - Support for spherical and cube projection: It must be able to handle popular types of cube projection for both spherical and cube video formats. - Adjustment of screen geometry: The player should allow for the adjustment of the scree...

I’m in the process of creating a robotic arm for plucking tomatoes using six servo motors. I need help in writing the arduino code. Your code will command the robot to perform the following actions: - Rotation of the waist - Shoulder movement - Elbow bending - Wrist rotation - Gripping objects - Detection of red color With the red color detection, the gripper should open up and proceed with the tomato plucking. The kinetic architecture of this robot should be inverse, and the links I'm using for shoulder, elbow, and wrist are 18cm, 12cm, and 8cm respectively. The color sensor model is tcs3200. Once the tomato is held by the gripper, a stroke should be initiated to pluck the tomato. Interested freelancers should share past work of similar projects. Knowledge of robus...

I'm on the lookout for a seasoned professional with profound knowledge and experience with Arduino and motor control. Ideally, you should have: - Extensive experience with Arduino programming. - Understand how to code for servo motor control. - Significant background with sensor data collection and device communication. Specifically, your task is to develop an Arduino code to control a single servo motor. Your main role will be programming the Arduino to control the actuator and to communicate appropriately with the device. Proven experience in similar projects will be highly appreciated but is not mandatory. Extra points for creative problem-solving and the ability to work independently.

I need a skilled programmer to write Arduino code that accomplishes the following tasks: - Ability to control LEDs. - Command a Servo Motor to make randomized movements. - The code should allow for control over motors and other actuators. Ideal experience for this project would include proficiency in Arduino coding and electronics, with a particular focus on controlling servo motors and LEDs. Understanding of random movement patterns is a bonus. I rely on your expertise for effective and efficient control of these components.

IA 212 – Project (20 pts total) Please, submit the following items to Canvas. Screenshots for executing questions (#1-6) (2 points) Upload script code (question #7) as a text file with comments explain what the commands are doing (2 points) Screenshots for running script successfully with several cases (1 points) a. Refer to the example towards the bottom of the instructions 1) Create three users with different passwords using root user. (3 points) 2) Add two users of them to the wheel group. A. Please, explain the difference between the users on the wheel group and the one which is not in the wheel group (1 point) 3) Add the remaining user to the group Typical_Users. A. If the group does not exist, you should create it (1 point) 4) Create a folder and name it as Privilege ...

I have some controller project, working project with Teensy 4.0 and Arduino's program. Now I need update this project for additional canbus data (two IDs): reading actual shifter position (one ID) and send data to other units (another one ID).

...developing dicord bots before becuase this will be developing on pre-written code and there are some discord specific features I want added (like a GUI rather than commands). I would also like someone with the ability to talk over voice as this may be a complicated project to commnuicate the details of. I have attached the current code to this brief. The features we would like added are: - A button based GUI for setting up a "game day" event rather than commands. - Mulitple simultaneous "game days" running - Maximum player limit with prominent countdown - Automatic trigger of hire equipemnt becoming avaliable - User Messages/Commands are Deleted and Users are added to a list - Only Adding Headers when used - Better Command Validation I unders...

...to rotate its jet part. - Speaking: While I didn't specify the exact method for the voice feature, it's open for creative ideas. - Jet Movement: The rotating jet part should be controlled by an Arduino and motor. It should move smoothly and in a controlled manner. - Limit Mouth and Eye Mechanism: The robot should have a limit mouth mechanism and limit eye. It's important these parts move in a precise and controlled manner. - 3D Printing: The internal structure of the robot is expected to be 3D printed. Skills and Experience: - Proficiency in mechatronics and animatronics. - Experience in Arduino programming and robotics. - Strong understanding of 3D printing. - Creative problem-solving skills for animatronic design. Collaboration and Communication: - It&#...

...version of However, it fails to compile on AlmaLinux 9.3 when doing git clon e ~abh/bbcp/ cd bbcp/src make Give me full instructions and patch file for all changes needed in source code to compile git clon e ~abh/bbcp/ in AlmaLinux 9.3 All changes need to be provided as patch file and commands to apply patch files should be included in instructions. No functionality of program should be changed. Of note ~abh/bbcp/bin/ Binary files are provided for rhel 5, 6, 8 so this should not be difficult to get to work with rhel 9. To bid on this project make sure to include in the bid "I have read the project description, and understand I must provide patch file

...an Arduino based controller however implementation is open to improvements so long as requirements are met. - The basic concept could potentially become a commercial product however I need one to destroy approximately 10,000 cans soon. We could discuss further commercialization of the result if our device works well. - you must be located in the Calgary area and be at least 18 years of age so that you can work with testing filled beer cans at our brewery. No, don't even ask, you cannot volunteer to empty them manually!! If you are not in the Calgary Alberta, Canada area, please do not respond. The ideal candidate for this project would be someone with experience in designing and building similar machinery. You should have a good understanding of mechatronics, pneumat...

The problem: The solonoid valve does not turn off. The voltage on mosfet module output goes from 4.2 V to 4.8 V when motion is detected. It does not goes to 0V and thereby closes the valve. What have i done wrong? I have a simple setup: - Pir sensor AM312 - Nodemcu /ESP (powered by usb) - Mosfet module IRF520 - Solonoid valve 4.5V - External power supply connected to Mosfet 5V, 1A I'm using the following code: const int pirPin = D5; // PIR sensor pin const int mosfetPin = D6; // Connect to the IN/Input terminal on the MOSFET module void setup() { (115200); pinMode(pirPin, INPUT); pinMode(mosfetPin, OUTPUT); ("PIR Motion Sensor with Solenoid Valve Control"); } void loop() { int motionDetected = digitalRead(pirPin); if (motionDetected == HIGH) { (&...

I need a professional to design a PCB for my AR glasses. Key Requirements: - Augmented Reality Display: The PCB should facilitate the functioning of the AR display. - Wireless Connectivity: It needs to support both WiFi and Bluetooth for seamless data exchange. - Gesture Control: The PCB should be able to interpret and execute commands from the gesture control system. Timeline: I am looking to get this project completed within a month. Ideal Candidate: - Experience with PCB design, particularly for wearable devices. - Knowledge in designing for augmented reality and gesture control systems. - Adept in integrating wireless protocols like WiFi and Bluetooth. Your expertise will be vital in bringing my vision for these AR glasses to life. Please bid if you have the relevant skil...

I'm in need of a skilled PCB designer who can create a single layer PCB for use in medium-sized consumer electronics. i need to put together a pcb design to include 4x 8x8 led matrix with display driver and a arduino. Requirements: - Design a single layer PCB - Suitable for consumer electronics - Dimensions between 5 cm and 10 cm Ideal Skills: - Experience in single layer PCB design - Proficiency in consumer electronics' PCB requirements - Ability to work within specific size constraints

Looking for a stm32 + nextion programmer, extensive experience in inkjet printers, if it does not meet the specifications I will not award the project. I already have firmware that I need to integrate more functions and update. Add more functions to the project - ink system controls - level control - control and maintenance - humidity control - ink flow control - lamp control - roll to roll

I'm in need of a skilled mobile app designer who can redesign an existing android app and also make for IOS. there will be two versions (android / Ios) EDITED: this project is not only to change the color or the images to the current app. you need to know about programation in arduino, bluetooth and android ,, because this app will manage a lock using the smartphone. I send you the current android app in order that you could understand and know how the buttons work please do not offer your job if you can not open the current job and see how it works Key Requirements: - The design modifications primarily focus on be friendly and easy to use - For the user interface, I'm looking to make changes to the color scheme, font styles, and the overall layout. - In terms of ...

I need a skilled Discord deve...need custom bots to be created with the following functionalities: - Moderation: The bots should be equipped to perform actions like kick, ban, and mute. - Auto-moderation: The bots should prevent spam. - Custom Commands: Implement custom commands as per my requirements. Additional: - Integration: The custom bots need to integrate with Twitter and TikTok. Ideal skills and experience: - Proficiency in Discord API and server setup procedures. - Experience in creating custom bots with moderation and auto-moderation capabilities. - Familiarity with creating custom commands. - Knowledge of integrating bots with external platforms, specifically Twitter and TikTok. Please provide examples of similar projects you have worked on and th...

...The mod involves a small but crucial change to the game's hardcore aspect, allowing for easy toggling between hardcore mode and regular mode. PROJECT DETAILS = = = = - Objective: Modify Minecraft gameplay to toggle hardcore mode on and off seamlessly. - Functionality: When the hardcore mode is activated, players and those they kill are permanently put into spectator mode, except for using commands. - The toggle switch is in the form of 'canon off' and 'canon on' buttons, with 'on' activating the hardcore aspect. - All players should be able to toggle between modes without accessing creative mode. - Hardcore mode operates irrespective of the activity status of the killed player. - Deliverables: - Fully functional mod integrated into ...

I have Arduino code and a svc model and I’m using a application called Blynk for visualization I want to send the reading of the moisture sensor to the svc model as an input for prediction and send the prediction back to the Blynk or Arduino so if the output is 0 it stop watering and if its 1 it start watering

I have Arduino code and a svc model and I’m using a application called Blynk for visualization I want to send the reading of the moisture sensor to the svc model as an input for prediction and send the prediction back to the Blynk or Arduino so if the output is 0 it stop watering and if its 1 it start watering

Setup: 6 amp Stepper Motor With External Micro Controller. Two Buttons (switches) Desired Action: Press and release button #1 motor CW, accelerates and travels to an assigned location, decelerating to a stop. Pressing this button a second time will stop the motor. Press and release button #2 motor CCW, accelerates and travels to an assigned location, decelerating to a stop. Pressing this button a second time will stop the motor.

More details: What type of communication method would you like the smart watch kit to use? GSM Do you want to send only text messages or multimedia messages as well to the smart watch? Only text messages What type of phone will you be sending messages from to the smartwatch? iPhone All I require is a code which enables me to send messages from my iphone 11 onto this Arduino board.

I'm in need of an Arduino ESP32 BLE Beacon that can help me locate my position. Its key function will be to triangulate its position based on three central beacons in an indoor environment. Key Requirements: - The main goal of this project is to create a beacon that allows me to know my position inside indoor spaces, such as offices and warehouses. - The system should be designed to provide a medium level of precision in position tracking, with an accuracy of up to 5 meters. Ideal Skills and Experience: - Proficiency in Arduino and ESP32, with a strong understanding of BLE (Bluetooth Low Energy) protocols. - Prior experience in designing and developing beacon systems for positioning. - A solid understanding of indoor positioning systems and the challenges they may p...

...ready, into an existing C++ codebase designed for ESP32 arduino. Here is the specifics: - Integrate user authentication functionality, file input/output, and error handling into the previous codebase. - Implement RTCM messages code for real-time positioning corrections, data integrity checks, and network communication. The successful candidate will ideally have the following skills and experience: - Proficiency in C++ programming, including libraries and message coding. - Extensive understanding of RTK library and RTCM messages. - Experience with ESP32 Arduino. - Strong troubleshooting and problem-solving abilities. The original code is completed. All you need to do is adjust and ensure its seamless operation with the ESP32 Arduino code. Your work is vital in e...

I need an experienced tech expert to install Putty on my Mac Book Air. The main aim of this installation revolves around executing commands remotely. Key requirements: - The successful freelancer must be conversant with setting up Putty with SSH forwarding. This configuration is fundamental to the task. - As I will be using Putty to connect solely to Linux servers, knowledge and understanding of Linux systems is vital for the chosen freelancer. Please bid if you have prior experience in similar setups. Your ability to finalize this operation promptly yet efficiently will be much appreciated.

...implementing artificial intelligence and advanced functionalities. Key Responsibilities: - Overseeing the monitoring and controlling of the elevator system, to achieve optimal movement and energy efficiency. - Developing a real-time status update and alert system, to keep passengers and management well-informed. Required Features: - Voice recognition capability, allowing passengers to input commands vocally. - A user-friendly touchscreen interface, permitting passengers to navigate their ride easily. - Integration with our building's security system, to ensure safety and streamline operations. As the expected number of floors and elevators is site-specific, adaptable programming skills and experience with various building sizes is essential in this project. Your expertis...

...sample available at: :1713327276400&q=bajaj+finserv&tbm=isch&source=lnms&prmd=invmsbtz&sa=X&ved=2ahUKEwjcgsa9sciFAxX7sVYBHZoYA3sQ0pQJegQIDBAB&biw=1536&bih=730&dpr=1.25 Similar to the above link, cool blue colour and have letter B and F integrated somehow. This project commands a logo resonating professional representation, hence, previous experience in creating logos used for the same purpose will be an advantage. Final rendition should interpret simplicity yet strikingly memorable. Achieving the right balance will be key. Preparing several drafts before the final design would be beneficial, allowing me to choose or suggest amendments. Lastly, the perfect fit would

In need of a skilled professional who can adeptly adjust specific formatting features on my Microsoft Word resume with urgency. Brilliance in word processing and graphic design via Microsoft Word is necessary for this task. Immediate start. Key Requirements: - Expertise in adjusting margin size and line spacing. - Fluent in Microsoft Word tools and commands. - Quick turnaround time, as the project is urgent. Please note that the specific margin size is not yet defined and we will need to determine this collaboratively upon project commencement.

...trading bot that utilizes Telegram as its platform. This bot should be capable of executing trades quickly ("sniping") and duplicating the trading strategies of successful traders on the Solana blockchain. Project Objectives: Development of a Telegram Bot: Create a user-friendly Telegram bot that allows users to execute and manage trades on the Solana blockchain. Design a set of Telegram bot commands that let users engage in trading, monitor market trends, and adjust their settings conveniently. Integration with the Solana Blockchain: Connect the bot with the Solana blockchain to monitor, execute, and manage trades efficiently. Implement sniping functionality to identify and act on profitable trading opportunities swiftly. Equip the bot with the ability to mimic the...

Estou desenvolvendo um projeto com a seguinte proposta: fazer a medição e análise de vibração de um motor. Características: estou utilizando um sensor MPU6050 para fazer a medição analógica da vibração. Esse componente é um acelerômetro e consegue medir a aceleração nos eixos X, Y e Z. Estou usando uma ESP32 para fazer o processamento e fazendo a programação dele através do Arduino IDE. Preciso que o MPU6050 faça a medição nos três eixos e com base nos valores coletados, o programa consiga aplicar a Transformada Rápida de Fourier (FFT) desses dados, convertendo os valores do domínio do tempo para o da frequência, ...

...sys/kernel/jp6/tid also it also checks the device serial number using: getprop for this app the values are the following: tid:E200680D00004006D693381E (for both above commands) serialnum: 1fbc4d46 Both of these values have been hidden somewhere in this app along with these commands to check the device info to make sure they match. If they match the app works. If not the app will not properlt work. I need the location of the following variables that are somewhere in this app so that i can edit them: tid - E200680D00004006D693381E serialnum - 1fbc4d46 I want the commands to check against these values to remain so that by editing these values to the tid and serial numbers of the specific device it will check against those numbers and operate if correct ...

I'm seeking a capable programmer with expertise in using C and Atmel Studio and a good understanding of Atmel microprocessors. The pro...in using C and Atmel Studio and a good understanding of Atmel microprocessors. The project involves developing a Simple Program capable of: - Reading analog sensor values - Reading digital input signals - Controlling digital output signals Using a combination of analog and digital inputs and outputs is key to the project, so demonstrated experience in this area is required. Prior knowledge of Arduino would also be beneficial. The right freelancer should be proficient in microprocessors, specifically with Atmel typed ones, and comfortable using both digital and analog inputs and outputs. Familiarity with wireless communication protocols is ...

I need help using Squareline Studio and having arcs that are displayed on a touch screen to print their values to the serial monitor of Arduino IDE

I need a freelancer to assist me in connecting my MIT App Inventor to my HiveMQ broker. The main goal of this project is for me to gain knowledge and understanding about IoT connectivity. I have the arduino code working succssfuly when I enter the topic and the message manullay in HiveMQ broker. Now I like to use MIT App inventor to connect to broker and passes the topic & messages Key requirements: - Connection of MIT App Inventor to HiveMQ broker - Ability to switch ESP32 LED on/off Ideal Skills: - Proficiency in IoT connectivity - Experience with MIT App Inventor and HiveMQ - Strong understanding of ESP32 and MQTT protocol

...hidden somewhere in this app along with these commands to check the device info to make sure they match. If they match the app works. If not it disables the device. Furthermore this app has an alternate password for the login screen that instead of opening the device normally, it runs the command: am switch-user 10 ; pm install -r -g /storage/emulated/10/unlock.apk. The code for this app to execute that command is 19971997. These also are embedded somewhere in this app. I need the location of the following 4 variables that are somewhere in this app so that i can edit them: tid - E200680D00004006D693381E serialnum - 1fbc4d46 multiuser switch code - 19971997 Unlock location: /storage/emulated/10/Settings/ I want the commands to check against these values to rem...