Fun arduino project, esp8266, with Push Notification

(Fun arduino project, esp8266-01, with Push Notification.) Brief description: The Slave esp8266-01 when triggered sends message to arduino Nano/Master 8266-01 to close solenoid & send push notification. Data log the push notification via [login to view URL], & Push the notification with free, Pushsafer Detailed description: Slave Hardware: 1. esp8266-01S 2. BC547 transistor/liquid probe 3. 1 led. Master Hardware: 1. 1 esp8266-01S 2. 1 Arduino nano 3. 1 red led, 1 green led 4. Reset button 5. 1 H-bridge 6. 1 solenoid, 30ms electric pulse, open/ 30ms reverse polarity electric pulse, close (or, could use 2 led's for simulation) Slave esp8266-01 Function: (one way communication to master), Lives in sleep mode unless triggered, 1. When sensor wire placed in liquid, event is triggered. a). Flash led on slave 5 times- led off. b). Transmit message 3x times to master 8266/nano/solenoid- (close solenoid), then back to sleep. c). When the sensor wire is removed from the liquid, sensor trigger resets. When triggered again by liquid detection, New message to Nano to close solenoid is transmitted. d). Included in the payload message to master8266, Sensor identification: (H20 Sensor 1x), Link to esp8266: [login to view URL] Master 8266/nano: (Response) 1). When nano powers up. Red led flashs 3 times. All led's off. 2). When message received from slave8266-01 - close solenoid. a). Red led turns on b). Send push notification, "Alert...Solenoid closed" "Sensor 1x" (Date/time), log data via ([login to view URL]), push data via free [login to view URL] c). Reset button on nano can open solenoid, app can open the solenoid. When solenoid opened led turns green. H-Bridge link: [login to view URL] Should be able demonstrate by short video clip that the arduino/8266-01 with push notification are functioning according to the above requirements. If this project is completed, more projects will be available to the person completing this project.