SD Card Splitter

$750-1500 USD

Lukket

Slået op

cirka 14 år siden

$750-1500 USD

Betales ved levering

I need to develop an SD Card/Splitter that is able to run on two devices simultaneously. Neither of these devices will be accessing and storing information at the same time. However, it needs to be plugged into each device at the same time. The goal is to have a camera take a picture and then store the picture to the SD Card. Then on a set programmed interval the phone will be able to access the same SD Card and be able to process all the pictures taken since the last time it accessed the card. This has to be run in an environment were the only available internet signal is Edge or 3G so no WIFI solutions will be useful. What I need developed is the physical piece of hardware that will allow the SD Card to be used by two devices.

Engineering

Manufacturing

Manufacturing Design

Materials Engineering

Product Design

Projekt-ID: 660433

Om projektet

7 forslag

Projekt på afstand

Aktiv 14 år siden

Leder du efter muligheder for at tjene penge?

Emailadresse

Fordele ved budafgivning på Freelancer

Fastsæt dit budget og din tidsramme

Bliv betalt for dit arbejde

Oprids dit forslag

Det er gratis at skrive sig op og byde på jobs

7 freelancere byder i gennemsnit $971 USD på dette job

@stemtechnologies

We can priovide the hardware forthis. Can you send the details of the devices to which the sd card to be shared. Regards Somasundaram.I

$1.500 USD på 30 dage

5,0

(1 bedømmelse)

4,4

@ddjuric

We can do it, but we need to know more technical details. Please, contact us by email if you are interested. Best regards.

$1.000 USD på 15 dage

5,0

(1 bedømmelse)

2,6

@sbk

Please check your pm box.

$800 USD på 28 dage

4,2

(1 bedømmelse)

2,4

@harfaspaul

Good day. I am writing on behalf of my 2 colleagues and myself. We are all PhD students in the field of electrical engineering. We have 5+ years experience in hardware&firmware development for embedded systems, ranging from motor control applications to RFID card readers, on a large number of commercial microcontrollers (PIC16,PIC18,dsPIC33,Analog Devices ADuC, ARM 7, ARM 9, ARM Cortex-M3). Please contact me by private message to discuss more details. Looking forward to hearing from you, eng. Paul HARFAS

$750 USD på 20 dage

0,0

(0 anmeldelser)

0,0

@makinmakin

See details in MB.

$1.000 USD på 20 dage

0,0

(2 anmeldelser)

0,0

@ntichvideo

Purposed system uses two SD sniffer cards wire for connection to a target msp430 board. The two sniffer cards plug into the camera and the phone. A SD breakout card allows any SD card to be plugged in. The break out card Is wired to the msp430 target board. The msp430 passes commands and information from both SD card slots to the SD card. Additionally the msp430 can provide other automation services if needed. Deliverables: Working Hardware prototype hardware, Source code, block diagram. Cost: $750 US Terms: 50% to start project 50% on delivery. Buyer pays shipping. Time line: Delivery 4 weeks after first payment received.

$750 USD på 28 dage