Elevation drawing jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    5,000 elevation drawing jobs found

    I’ve just finished my first children’s chapter book and now I need a standout cover that instantly tells young readers, “this is a spooky scavenger hunt!” I’m looking for nothing Ai. The picture I added, is to give you an idea of what I’m looking for. Story & characters • Four best frie...wolf has to stay a wolf. This will be for ages 8-12 for the most part. But it can’t be Ai Thank you. Deliverables • Front cover illustration at 300 dpi, sized for 6" × 9" trim with bleed • Title and author name fully laid out in a kid-friendly, readable font • Layered source file (PSD or AI) plus flattened PDF/JPG for upload • One round of revisions after first draft If you love drawing slightl...

    $25 Average bid
    Guaranteed
    $25
    25 entries

    Part One: Pick at least one of the following activities to complete to help you "dig deeper" into a topi...activity that were new to you? What connections do you see from the topic/era you explored through your activity and the modern world? Reflections What is the biggest question you still have about this topic/era? How did this experience deepen or change your thinking about the topic/era under study? Part Three: Create Visual Display (40 points) Create a visual representation (infographic, drawing, book, comic strip, PowerPoint, video, etc.) that illustrates your Dig Deeper experience. Be sure to find a way to include each of the sections you completed above, including: The Activity The Details Connections Reflections Sources I have chosen to read the book...

    $94 Average bid
    $94 Avg Bid
    72 bids

    I already have finished floor-plan layouts for a two-story residence and now need a full drawing set that meets United States practice and the applicable state or provincial building code. The scope covers architectural sheets, structural calculations and details, plus all service drawings—electrical, plumbing tied together in a coordinated package. A bill of materials must accompany the set so I can begin obtaining bids as soon as the plans are approved. also need truss design to accommodate dead load of solar panels You will receive the current floor-plan PDFs (and DWG if you prefer) Your task is to translate them into permit-ready documents, sized for printing, and a digital package I can submit to my local reviewer and share with trades. Please include any standard notes...

    $468 Average bid
    $468 Avg Bid
    92 bids

    I have fifty DWG drawings that need to live in a single Revit 2023 project file. Your task is straightforward: trace clean 2D polylines for every wire route, tag each device, set up drawing sheets, and generate basic schedules. Most of the information is already on the DWGs; I will also supply a separate device list so you can cross-check and fill any gaps. I will be on hand for technical questions, but I’m looking for someone who can focus full-time on this for one week and deliver a well-organized .RVT file ready for my review. By the end of the week I expect: • One Revit 2023 file containing all 50 imported DWGs • Accurate polyline wire routes and device tags throughout • Sheets laid out and numbered to match the original drawings • Basic schedul...

    $73 Average bid
    $73 Avg Bid
    18 bids

    We are looking for an experienced **Free...- Structural General Arrangement (GA) Drawings. - RCC Structural Detailing and Construction Drawings. - Steel Structural Drawings (additional advantage). Required Skills - Excellent command of AutoCAD 2D. - Good understanding of RCC structural drawings and reinforcement detailing. - Ability to read and interpret structural design drawings. - Accuracy in dimensions, reinforcement detailing and drawing presentation. - Ability to coordinate and work under the guidance of a Structural Engineer. - Timely delivery and professional commitment. Work Arrangement - Freelance / Project-Based Work. - Work from Home. - Coordination and technical guidance will be provided by Structural Engineer. - Payment will be based on project scope and mutually agr...

    $4 / hr Average bid
    $4 / hr Avg Bid
    14 bids

    I need a CAD drawing and structural stability certificate for a new cold chamber to be built. Requirements: - The chamber will be constructed using insulated sandwich panels with a steel frame. - Ideal candidates should have experience in structural engineering and proficiency in CAD software. - Knowledge of cold chamber specifications and requirements is a plus. - Puff panel 100 MM. panel internal construction should be SS 304. Panels should be able to withstand the wind velocity of 200 KMPH and 160000 M3/h volume of air. -Structural stability certificate to be provided. Please ensure the CAD drawing is accurate and the stability certificate meets all necessary regulations.

    $75 Average bid
    $75 Avg Bid
    5 bids

    I'm seeking an artist to re-create a line drawing of a Native American-inspired design. It should very closely match the rough art shown, but cleaned-up. The piece should feature: In line art, with spot colors: - A medicine wheel with a bull skull - Smaller icons of natural symbols: sun, moon, thunderbolt, feathers, and turtle Ideal skills and experience: - Experience/familiarity in Native American art and symbolism - Strong illustration skills Please provide a portfolio with similar works.

    $82 Average bid
    $82 Avg Bid
    80 bids

    ...clean feature tree, where every configuration rebuilds without errors and the hole-to-lobe wall is consistent on all sizes. Screw angles defined clearly and editable from named dimensions (cranial-caudal and medial-lateral). A short written or video explanation of the method so I can maintain and extend it (additional sizes, multi-level plates). Optional: a recommended dimensioning scheme for the drawing (hole position and angles on a curved part). Requirements Strong SolidWorks experience with surfacing, reference geometry, equations and design tables. Medical device or orthopedic implant modeling experience strongly preferred. Understanding of how curved parts are machined (3-axis vs. 3+2) is a plus. To apply, please include A brief description of how you’d approach ...

    $340 Average bid
    $340 Avg Bid
    42 bids

    ...your engineering design skills using Autodesk Fusion (Fusion 360). It is worth 80% of the overall module mark. Learning Outcomes As a result of undertaking this assignment you should be able to: • Use creativity to produce innovative designs • Manage the design process from idea to CAD design • Use Autodesk Fusion to design engineering components • Prepare a general arrangement drawing • Prepare a detailed component drawing • Apply sustainability principles in product design • Communicate design intent through technical documentation Design Brief Engineering for Sustainable and Climate-Resilient Communities A rainwater downpipe diverter and filtration unit is a practical product that supports local rainwater collection for suitable non-po...

    $18 Average bid
    $18 Avg Bid
    8 bids

    ...single-family home. The brief is clear: three bedrooms in total, with one on the ground floor and two on the first floor. I need a cohesive set of drawings that align architecturally, structurally, and for all services, so the contractor can build without guesswork. Scope • Architectural floor plans for both levels, showing room dimensions, door/window schedules, and furniture placement. • Two-sided elevation design that balances aesthetics with climate considerations. • RCC structural drawings with footing, column, beam, and slab details calculated for local loads. • Mark-out/setting-out plan keyed to on-site benchmarks so excavation starts accurately. • Coordinated plumbing layout—including water supply, drainage, and vent lines—s...

    $252 Average bid
    $252 Avg Bid
    19 bids

    ... Fun & Brain Development Activities** - Mazes and puzzles - Spot the difference - Dot-to-dot activities - Shadow matching - Find the hidden object - Pattern recognition - Cut-and-paste activities - Logical thinking and problem-solving - Memory and observation activities **4. Creative & Interactive Printables** - Reward and achievement charts - Daily routine planners - DIY craft templates - Drawing and doodle activities - Holiday and festival activity packs - Personalized name-tracing templates (optional) ## Design & Quality Requirements - Attractive, professional, child-friendly layouts - Original educational content, not copied from existing worksheet websites - Age-appropriate learning objectives and difficulty levels - High-resolution, print-ready PDFs (300 DP...

    $267 Average bid
    $267 Avg Bid
    34 bids

    ...Verify slab fit and plan around offcuts before you finalise your design. Architects Specify and plan stone usage right from the drawing stage, with every piece and offcut accounted for. 4. OFFCUT MARKETPLACE STRIP One line with a button: "Only need a small piece? Find an offcut instead of buying a whole slab." Button: "Visit the Offcut Marketplace" (link placeholder). 5. OUR SOFTWARE Section Heading: "Smart tools for every project" Four cards in a grid, each with a screenshot, name, short description and a "Watch the demo" button (shows "Demo video coming soon." until links are added): Quartz & Porcelain: Fast, automated cutting layouts for standard-sized slabs. Drawing Optimiser: Draw your layout once and generate...

    $34 Average bid
    $34 Avg Bid
    94 bids
    Trophy icon Design PONPANI Kids Busy Binder
    5 days left

    ...Matching & Shadow Matching: Interactive matching activities with clear pictures, corresponding shadows and reusable matching pieces. 12. Puzzle Activity: Picture-cutting puzzle with suitable cutting lines and separate pieces that children can arrange to complete the picture. 13. Vehicles: Car, bus, train, aeroplane, ship, bicycle, motorcycle and other common vehicles. 14. Final Drawing & Cutting Activity: A proper drawing space for children, with creative and safe cut-out activity pieces. Include suitable cutting templates and reusable pieces wherever required. COVER DESIGN Front Cover: - PONPANI brand name and logo. - Title: "MY FIRST ACTIVITY BOOK". - Subtitle: "Learn • Play • Grow". - Age group: 2–5 Years. - Attractive, ...

    $10 Average bid
    Guaranteed
    $10
    68 entries

    ...flat or light slot, and I already have a Siemens Sinumerik ShopTurn program and a fully dimensioned drawing ready for each one. Your task is to translate that information into a complete Fusion 360 manufacturing package so I can run the job on my Sinumerik-controlled lathe without extra edits. For every part I will supply: • the 2-D drawing with dimensions and tolerances • the existing Sinumerik / ShopTurn program for reference From that, I need back: • a clean STEP model that matches the drawing • a Fusion 360 CAM file with all setups defined (turning, facing and drilling are the usual ops) • posted G-code for each setup, proven out with the Siemens Sinumerik post • an updated PDF drawing that clearly shows tolerances ...

    $16 Average bid
    $16 Avg Bid
    10 bids

    ...provide project requirements, architectural drawings, construction specifications, drafting standards, and detailed instructions for each assignment. Your responsibility will be to independently complete the assigned drafting work, ensure everything follows the provided standards, and submit the completed deliverables for my review. This is a hands-on technical drafting role, not simply a 2D CAD drawing position. Key Responsibilities - Interpret architectural drawings, specifications, and joinery requirements. - Create accurate 3D joinery models using Cabinet Vision. - Prepare detailed shop drawings, including plans, elevations, sections, and construction details. - Develop manufacturing-ready cabinetry models with correct construction methods. - Follow provided construction ...

    $8 / hr Average bid
    $8 / hr Avg Bid
    27 bids

    I have a compact 20 ft × 50 ft plot and I’m ready to put up a sturdy ground-floor 2-BHK that will comfortably house my parents for the next three to five years. From day one, though, every square foot has to be optimized for future income, so the core design priority is maximum rental potential. Afte...when the time comes. • Basic service drawings (plumbing, electrical routing) in AutoCAD/Revit format that align with local code and simplify approval. Hand-off formats: native CAD files, print-ready PDFs, and high-resolution JPG/PNG renders. If you have experience squeezing the most rent out of small urban plots—especially with phased construction—let’s make this project shine. Attached drawing is just for an idea. i am expecting a better one. ...

    $80 Average bid
    $80 Avg Bid
    28 bids

    ...preserving the current layout so that every profile looks like part of the same family. Scope of work • Create a refined, print-ready template from the draft. • Build the first 8–10-page brochure for one project using the text and high-quality images I will supply. • Once that first piece is approved, replicate the template for the remaining nine projects, swapping in the new content and elevation images only. Deliverables for every brochure • Press-ready PDF in A3 size (spreads and single pages). • Fully editable Adobe Illustrator (.ai) file organised in clear layers. Workflow I’ll share the draft file, content, and images for the first brochure immediately. After we lock that in, I’ll forward the remaining project packag...

    $22 Average bid
    $22 Avg Bid
    65 bids

    I have a parcel of land that will be split into individual farmhouse plots and now need a polished master layout that can drop straight into my sales brochure. The drawing must clearly show every plot, the internal road network, generous green spaces, and the locations earmarked for shared facilities so buyers immediately feel the development’s quality. Beyond accuracy, the artwork has to look premium—clean lines, balanced colours, and a presentation style that photographs well in print and on screen. I will rely on this single sheet to convince prospects, so legibility and curb-appeal are equally important. Please deliver: • A dimensioned, scalable base plan in a fully editable format (DWG or layered Illustrator/PSD). • A high-resolution, print-ready...

    $198 Average bid
    $198 Avg Bid
    37 bids

    I have an office-style commercial space and I need a clean, professional AutoCAD drawing that focuses on the cabling and equipment layout for the CCTV system. The plan must clearly show every camera position, each power point that feeds the cameras, and the exact routing of cable trays from the devices back to the head-end. What I will hand over: the floor plan in DWG, a rough sketch indicating preferred camera spots, and basic device specs. What I expect back: • A layered DWG (and matching PDF) with cameras, power outlets, and tray routes clearly differentiated by line weight or colour • Simple legends and labels so an installer can follow the drawing without extra clarification • Neat scaling, tidy dimensions, and no unexplained blocks or proxy ob...

    $11 Average bid
    $11 Avg Bid
    13 bids

    ...between the office and garage areas**. The plans must show the appropriate required fire-rated assembly, not merely identify a wall as “fire-rated.” The drawing should include sufficient wall/assembly information for County review and construction. ## Files Provided to Selected Freelancer I will provide: - Final conceptual layout/use-plan image - 3D interior layout reference - Licensed surveyor's site plan - Overall building dimensions - Proposed room dimensions - Garage-door locations/sizes - County's written architectural-plan requirement ## Required Deliverables The final project should include: - Permit-ready architectural drawing set - Dimensioned floor plan - Fire-rated wall/assembly details - Required life-safety and egress information ...

    $222 Average bid
    $222 Avg Bid
    48 bids

    Technical drawings for sidewalk access ramps. Technical drawing in PDF. Technical drawing, dimensions, architectural construction, CAD/CAM, Construction Management.

    $125 Average bid
    $125 Avg Bid
    1 bids

    Technical drawings for sidewalk access ramps. Technical drawing in PDF. Technical drawing, dimensions, architectural construction, CAD/CAM, Construction Management.

    $125 Average bid
    $125 Avg Bid
    1 bids

    Technical drawings for sidewalk access ramps. Technical drawing in PDF. Technical drawing, dimensions, architectural construction, CAD/CAM, Construction Management.

    $125 Average bid
    $125 Avg Bid
    1 bids

    Technical drawings for sidewalk access ramps. Technical drawing in PDF. Technical drawing, dimensions, architectural construction, CAD/CAM, Construction Management.

    $125 Average bid
    $125 Avg Bid
    1 bids

    Technical drawings for sidewalk access ramps. Technical drawing in PDF. Technical drawing, dimensions, architectural construction, CAD/CAM, Construction Management.

    $125 Average bid
    $125 Avg Bid
    1 bids

    Technical drawings for sidewalk access ramps. Technical drawing in PDF. Technical drawing, dimensions, architectural construction, CAD/CAM, Construction Management.

    $125 Average bid
    $125 Avg Bid
    1 bids

    ...on-site here in the United States (specifically Texas), and my solar contractor cannot proceed until we can prove, on paper, that the structure will safely support the new PV array. What I can supply you right away are clear photos, detailed measurements, and notes on the panel layout and weight distribution. From these, you will create: • Structural drawings of the existing pergola (plan, elevation, and any required connection details) • Load analysis showing the additional weight and uplift from the solar system plus local wind codes • A final sheet bearing your Texas PE stamp confirming the design meets current Texas building code and will hold up the solar system Please base your work on the information I provide, let me know if you need anything extra, ...

    $440 Average bid
    $440 Avg Bid
    59 bids
    Trophy icon Courtyard Soil & Drainage Study
    4 days left

    ...buildings. My main goal is a build-ready plan for evacuating rainwater to the public storm-water network; the inspection chamber for this network is already identified on site. Beyond the drainage layout, the study must define the precise sub-grade slopes and propose practical measures to reduce clay shrink-swell effects near neighbouring foundations. Expected scope and deliverables . • Scaled drawing (DWG/PDF) showing pipe routes, diameters, outfall to the public network, and recommended cut-and-fill levels with minimum/maximum gradients. • Recommendations to mitigate shrinkage-swelling (suitable backfill, geotextiles, moisture control, etc.). In your proposal, please indicate the standards you work to (NF P 94-500, Eurocode 7 or equivalent), the timeline ...

    $10 Average bid
    Guaranteed
    $10
    8 entries

    I have 5 PDF drawings of tube bundles of heatexchanger that will be re-drawn and returned to me as PDF files no later than tomorrow, 3:00 PM Dubai time. The dimensions are the same while the drawings will be a little bit bigger in size with anew title block that holdas my company name and logo. you can make each drawing on two pages so as to fit all the details. Deliverables • 9 matching PDF drawings (A4 size) • All files named as per the original drawing numbers . I will verify the drawings and check if it is the same like the original one . Company name: AL DAR AL KHADRAA GENERAL TRADING CO LTD , KIRKUK CITY-IRAQ. LOGO WILL BE SUPPLIED LATER. THE FILES WILL BE NAMED EXACTLY THE SAME LIKE THE ORIGINAL ONES.

    $97 Average bid
    $97 Avg Bid
    95 bids

    ...interact with dark asphalt versus light-grey concrete, and how the human eye dynamically adapts when transitioning from a high-speed highway or an elevated overbridge into a commercial space. Scope of Work & Deliverables This project is structured for a scalable roll-out across two critical layers: Core Operational Safety & High-Impact Visibility - Flyover Line-of-Sight Mapping: Utilize 3D radar elevation data (via Google Earth Pro or similar) to calculate the precise downward visual angle of motorists cresting the flyover structure (~6.5m–~7.5m relative height). - Structural Transition Engineering: Design a uniform, anti-glare light runway across the complex canal bridge, ingress/egress portals, and the 27m setback void using asymmetric optics to ensure driver s...

    $67 Average bid
    $67 Avg Bid
    9 bids

    ...from it. Because the seat will live in large layout plans, keep the geometry light—just the overall block-out plus correctly shaped armrests and support legs. No upholstery stitching or tiny hardware; accuracy is important only for the seat-down position shown in the spec. Please match the stated width, depth, and height exactly, replicate the armrest profile and leg silhouette called out on the drawing, and leave everything else as simple, clean faces. Set the component’s origin at floor level on the centreline so I can array the seat quickly in rows. Tag or layer everything as default, leave materials unassigned, and save in SketchUp 2021 (or lower). Deliverables: • 1 SketchUp (.skp) file of the seat in the “down and ready” position • A qui...

    $64 Average bid
    $64 Avg Bid
    87 bids

    I have a single PDF that is purely a scanned image of a drawing and I need it redrawn into an editable DWG. Absolute dimensional precision is not critical; what matters is that the new file looks very close to the original so I can use it as a clear reference later. Please include all visible lines, geometric shapes, and any text labels that appear on the scan. Notes, symbols, and detailed dimensions can be left out for now—visual fidelity is the main priority. Deliverable: a clean, well-layered DWG ready to open in AutoCAD (or compatible software) that mirrors the scanned PDF’s appearance.

    $98 Average bid
    $98 Avg Bid
    219 bids

    I already have the general arrangement drawing, full bill of material, and completed pressure-design calculations for a pig launcher and receiver. What I still need is a set of ASME-compliant calculations that demonstrates the equipment’s integrity under seismic, wind, and other anticipated loads. Please base every check on the relevant ASME provisions (pressure vessel section) rather than ASCE 7, Eurocode, or any client-specific rule set. The scope of work is limited to the vessel shell, closures, and nozzles; I do not require leg or foundation analysis at this time. Your package should: • Quantify seismic, wind, and any additional mechanical loads that act simultaneously on the launcher and receiver. • Show stresses, MAWP/MATL comparisons, and utilisation rat...

    $455 Average bid
    $455 Avg Bid
    60 bids

    ...starting with fresh site measurements and photos that my site engineer and I will supply. Your scope covers every drawing needed for approval and construction: • Complete construction working drawings, including civil floor plans, elevations, sections, plumbing and drainage layouts, and the overall site plan. Proficiency in AutoCAD 2D is essential because we’ll iterate quickly. You’ll coordinate directly with our Lonavala-based site engineers for clarifications and incorporate revisions until the drawings are ready for contractors on-site. I prefer someone with 3–5 years of similar residential experience who can share a concise portfolio and indicate expected charges per drawing set or per milestone. If this sounds like a good fit, let’s ta...

    $94 Average bid
    Local
    $94 Avg Bid
    19 bids

    I'm seeking an experienced technical drawer to create precise manufacturing drawings for furniture, lighting or wood / brass / ceramic products. Requirements: - Accurate measurements - Detailed and clear drawings - Ability to work from hand sketches, photos, and written descriptions Ideal Skills and Experience: - Proficiency in technical drawing software - Experience with furniture or wood / ceramic / lighting product design - Attention to detail and accuracy

    $12 / hr Average bid
    $12 / hr Avg Bid
    34 bids

    ...pickup point to discharge to eliminate any chance of contamination. Scope of work – Size the vacuum pump, piping, elbows and other compenents required to complete the installation – Select hygienic pipe work often stainless-steel components, tri-clamp connections, and gaskets that meet FDA / EU food-contact requirements. – Integrate quick-release sections for cleaning – Provide a layout drawing, P&ID, and a concise control logic outline showing sequence of valves, level probes, and pump operation. – Deliver detail drawings and a bill of materials ready for procurement, preferably in SolidWorks or AutoCAD format, plus the supporting sizing calculations in Excel or PDF. Acceptance criteria 1. Powder remains fully enclosed throughout conv...

    $456 Average bid
    $456 Avg Bid
    61 bids

    ...first job is to open the enclosure parts and confirm that every printed-circuit BOARD LED lines up exactly with the Symbols on the enclosure and the call-outs on the PDFs. Use both sources side-by-side; that dual check is important to me. If you spot even the slightest mis-alignment, make the correction inside the SolidWorks part, then update the dimensions that show the new position on the PDF drawing so the documentation always reflects the model. When everything is perfect, export one clean STL of each top with the symbols actually cut through (those openings should read as transparent/null in the file). Return the native SLDPRT versions without the cut-outs preserved—so I end up with two versions of every part. Deliverables: • Corrected SLDPRT files (no cut-outs...

    $29 Average bid
    $29 Avg Bid
    62 bids

    I have an existing AutoCAD base drawing of a roadway corridor and need a clear concept plan that adds a protected bike lane along that route. Your task is to work in the supplied DWG/survey file and draft a preliminary layout that shows exactly how the new bikeway will fit within the current curb-to-curb width. The concept must illustrate: • the full lane alignment, • proposed widths for both the bikeway and the remaining travel lanes, and • the type and location of physical barriers or buffers that will keep riders separated from traffic. I want the drawing to read well for non-technical reviewers, so use clean layers, intuitive linetypes, and concise call-outs. A short written note that summarizes design assumptions (design speed, minimum clearances, accept...

    $8 / hr Average bid
    $8 / hr Avg Bid
    13 bids

    I already have detailed GA drawings; what I now need are workshop-ready fabrication drawings for the machine frames and other custom metal parts shown on those layouts. Every drawing must be produced in AutoCAD and delivered as native DWG files so our shop can slot them straight into the production workflow. All key manufacturing information must migrate from the GA to the fabrication package, including: • Complete dimensions, material sizes, and cutting lengths • Weld symbols, bolt schedules, and clear assembly views • Exact hole locations, tolerances, and any surface-finish notes necessary for machining or coating I will provide the GA set the moment we start. Please create individual part drawings and exploded assemblies on well-structured layers, using an i...

    $74 Average bid
    $74 Avg Bid
    39 bids

    I need an experienced engineer based in India who can step in remotely, a few hours each day, and keep my residential building projects on track. Your background should cover plumbing, electrical and civil so that you can quickly understand any drawing that lands on your screen, spot coordination clashes, and speak the same language as site teams and specialist contractors. The work is purely coordination focused. You will be: • Reviewing drawings and other technical submittals to be sure everything lines up across disciplines • Interfacing with site engineers, vendors and contractors to resolve day-to-day queries • Preparing concise progress reports and trackers so I can see, at a glance, where each project stands - Floating RFPs for work orders in Bangalore -...

    $238 Average bid
    $238 Avg Bid
    7 bids

    ...finally the automations, the full SEO setup, and the content migration. I welcome your proposed phase plan and an honest timeline for each stage. What I Will Provide I will provide all of my written content, my images and logos, my brand colors and aesthetic direction, my product files, and the access the work requires. My aesthetic is earthy, natural, elegant, grounded, and gently mystical, drawing on warm earth tones, goldenrod and forest greens, and vintage woodcut and old world apothecary accents, with a timeless, literary feeling. Who I Am Looking For I am looking for a developer who has built complex Wix ecosystems before, not only simple business sites, and who is comfortable with Wix Stores, Wix Bookings, Wix Events, Wix automations, SEO setup, and integrations with out...

    $427 Average bid
    $427 Avg Bid
    369 bids

    ...field measurements, photographs, and my proposed layout the moment we start. The connection detail is prepared and is acceptable to the Plan Reviewer but the prepared detail-drawing needs to be sealed. Professional requirements The seal must be from a currently registered Professional Engineer (P.E.) or equivalent who is authorized to seal residential structural documents in the State of Indiana. A copy of the active license will be requested before final acceptance. Timeline The house has been built -- only this detail needs to be reviewed and sealed If you are registered in Indiana and can review and seal this detail drawing, the client is ready to move forward right away....

    $473 Average bid
    $473 Avg Bid
    32 bids

    ...drawings for a new machinery control cabinet. You can work in AutoCAD Electrical or EPLAN Electric P8—whichever you prefer—as long as the resulting files remain fully editable. What I’ll hand over • A complete parts list with every device, rating, and manufacturer part number • All electrical requirements (voltage, current, I/O counts, safety notes) What I expect back • Scaled panel-layout drawing showing the physical placement of components, wire ducts, and DIN rail spacing • Point-to-point wiring diagram with clear wire tags, terminal numbers, and reference cross-links • Native CAD files plus a PDF set for quick review Please follow common industrial standards (IEC or NFPA 79) and keep layer, symbol, and tag naming consist...

    $68 Average bid
    $68 Avg Bid
    25 bids

    I have a retail store that needs a full construction drawing package. 10 sheets in total so my builder, trades, and local authority can move straight from paper to site without additional clarification. You will receive a rough, dimensioned sketch of the current shell; all measurements and photos of services are already noted, so the core information is ready for you to translate into professional documentation and a reference document for design The set must cover every zone of the shop: the sales floor with all display fixtures, the checkout counter, back-of-house storage, restrooms, and staff areas. Line-weights, dimensions, call-outs, and standard detailing should follow best practice so the package is immediately buildable. Deliverables (PDF + editable DWG or RVT): • ...

    $297 Average bid
    $297 Avg Bid
    90 bids

    ...I can prototype freely later. Clean silk-screen labelling is important—English is fine. What I expect from you • Schematic capture and PCB layout using KiCad, Altium, or another industry-standard tool compatible with my contract manufacturer. • Production files—Gerbers, drill map, pick-and-place, centroid, and a BOM with Chinese-sourced part numbers where possible. • A quick mechanical drawing with board outline, connector placement, and mounting-hole dimensions so I can drop the board into my enclosure model. • Ongoing e-mail or WeChat coordination with the Shenzhen-based assembly company during DFM review and the first pilot run. I am located outside China, so having you on the ground to answer questions in Mandarin and keep the factory...

    $243 Average bid
    $243 Avg Bid
    16 bids

    ...with front, side and top views Deliver clean, organized files the 3D designer can work from Make revisions based on my feedback Answer questions from the 3D designer during modeling Requirements: Proven experience as a jewellery designer, with previous work in the GCC (UAE, Saudi Arabia, Bahrain, Kuwait, Qatar, Oman) Good understanding of GCC jewellery styles and market preferences Strong hand-drawing or 2D skills (Illustrator, CorelDRAW, AutoCAD or similar) Knowledge of gold and gemstone standards, and of how pieces are manufactured Attention to detail and accurate measurements Good communication and reliable deadlines To apply: Send your portfolio (especially GCC projects), your rate per design, and your estimated delivery time....

    $25 Average bid
    Urgent NDA
    $25 Avg Bid
    9 bids

    ...at A & A Engineering. This position works independently on a wide range of drafting assignments, communicates with clients as needed, Essential Duties and Responsibilities • Prepare Structural Drawings, revisions, and corrections under supervision. • Ensure drawings meet company standards for accuracy, completeness, and quality. • Apply and maintain company drafting standards, procedures, and drawing requirements, and help improve them as needed. • Complete and submit client and project forms, and similar paperwork, verifying that all information is correct and complete before submission. • Manage multiple tasks and deadlines at once, and communicate progress, questions, and potential delays to supervisors promptly. • Collaborate with Project Man...

    $11 / hr Average bid
    $11 / hr Avg Bid
    54 bids