
Closed
Posted
Paid on delivery
I'm seeking a mechanical engineer for immediate technical calculations or analysis focused on heat, cooling, or airflow. This is for a commercial building (dance and fitness studio) Key Requirements: - Expertise in thermal dynamics and HVAC systems - Proficiency in technical calculations for heat transfer and airflow - Ability to deliver accurate and detailed analysis quickly -seal and stamp
Project ID: 40783716
39 proposals
Remote project
Active 15 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
39 freelancers are bidding on average $351 USD for this job

Hello, I am a design engineer with 10+ years experience, I am expert in Structural and Mechanical stress analysis of different structures so i can do the required design drawings and calculations in the required time. I have finished similar projects before and finished 600+ projects. Please check my portfolio and reviews. Thanks.
$500 USD in 7 days
8.6
8.6

Hello, I’m a Mechanical Engineer with over 2 years of experience in HVAC design, thermal calculations, heat transfer, and airflow analysis, with experience across residential, commercial, and industrial projects. I can share relevant HVAC design samples. I can assist with your dance and fitness studio by providing a fast, technically detailed analysis covering: - Heating and cooling load calculations based on occupancy, activity levels, lighting, equipment, and building envelope. - Sensible and latent heat gain analysis, accounting for the high occupancy and activity levels typical of fitness spaces. - Outdoor air and ventilation requirements. - Supply and return airflow calculations and duct sizing. - HVAC equipment capacity verification and identification of potential system deficiencies. I can prioritize the work once I receive the drawings and project information. Please share the project location, floor plans, ceiling heights, occupancy, existing or proposed HVAC equipment details, and the specific calculations required. I can then confirm the scope and turnaround time.
$500 USD in 7 days
6.0
6.0

Hello Tony This is Mohand, Mechanical engineer, based on U.S engineering. Hi there, I can assist with mechanical engineering calculations and HVAC analysis for your commercial dance and fitness studio, focusing on heat transfer, cooling loads, ventilation, and airflow requirements. Scope of Work: - Review the building information, existing HVAC equipment, and available mechanical drawings. -Perform the required heating and cooling load calculations, airflow assessments, and ventilation analysis. - Prepare a detailed technical report with calculations, findings, and recommendations. - Sign and seal by P.E. Thank you
$500 USD in 3 days
5.7
5.7

My engineering background and dedicated Thermal Analysis, HVAC, Mechanical Engineering, and Mechanical Design skills directly match the heat, cooling, and airflow calculations required for your dance and fitness studio. Since 2014, I have completed more than 150 projects for clients across the US, UK, Australia, Europe, and the Gulf, including engineering calculations and technical work where accuracy and clear documentation matter. My chemical engineering foundation supports practical analysis of heat transfer and thermal behavior, while my HVAC and mechanical design capabilities align with evaluating the studio’s cooling and airflow requirements. I also work confidently with CAD/CAM and SolidWorks when technical layouts or design context are needed, and I respond within a few hours to urgent work. I am ready to provide a detailed, technically sound analysis and can support the required seal and stamp arrangements where applicable. Choose me for a focused, dependable response to this urgent engineering requirement.
$500 USD in 7 days
5.8
5.8

For a dance and fitness studio, HVAC calculations must account for more than floor area. Peak occupancy, physical activity, ventilation, humidity, and equipment heat gains can significantly affect cooling demand. I'm an Aerospace Engineer with an MSc in Aerodynamics. My master's thesis focused on gas turbine cooling, providing a strong technical foundation in heat transfer, fluid mechanics, and thermal analysis. I also bring extensive engineering simulation experience using ANSYS Fluent. I can support your urgent project with: • Heating and cooling load calculations • Occupancy and equipment heat-gain assessment • Ventilation and airflow requirements • Review of existing HVAC capacity • Clear technical calculations and recommendations My priority is delivering a practical, well-documented engineering assessment quickly, with calculations organized for review by your project engineer. Regarding the required seal and stamp, final approval must be provided by a Professional Engineer licensed in the project's jurisdiction. My proposal covers the technical analysis, not PE certification. Could you share the studio's location, floor plans, occupancy, existing HVAC details, and permit deadline? I can then confirm the fastest practical scope.
$250 USD in 2 days
5.5
5.5

Hello, At Vutuk Design and Media, our advanced engineering and simulation team specializes in computational fluid dynamics (CFD), structural finite element analysis, and comprehensive thermal studies. Backed by 15 years of industry experience across ANSYS and SolidWorks Simulation workflows, we evaluate complex heat transfer mechanisms, thermal gradients, and cooling performance for demanding industrial applications. Before we initiate the numerical mesh setup and thermal boundary simulations for your project, please consider: What reference files and CAD geometry models will be provided for the thermal analysis workflow? What are the critical operational parameters, such as maximum allowable component temperatures and steady-state versus transient operating cycles? Would you benefit from comparative design iterations evaluating different cooling fin configurations or thermal interface materials? What final deliverables (e.g., engineering analysis reports, temperature gradient contour images, or validated CAD models) are required? Beyond thermal simulation, we offer structural FEA stress analysis, precision CAD modeling, and high-resolution technical presentation services. We invite you to visit our profile and portfolio to inspect our previous simulation and engineering design work. Let's make your thermal project a success. Best regards, Vutuk Design and Media
$500 USD in 7 days
5.5
5.5

Hi, I’m an experienced Revit BIM and CAD designer with a background in building design, HVAC coordination, and technical documentation. I can help organize the dance and fitness studio’s thermal-analysis requirements, review the available drawings and HVAC information, and prepare coordinated CAD documentation and calculation inputs for heat loads, ventilation, airflow, and cooling requirements. I understand this is urgent and can prioritize an initial review once the project files and building details are provided. Since you require sealed and stamped calculations, the final engineering analysis must be completed or reviewed and signed by a qualified, appropriately licensed mechanical engineer authorized in your jurisdiction. I can support the documentation and coordination process, but I cannot independently provide a professional engineering seal or stamp. Please share the building plans, location, occupancy, and existing HVAC details so the scope can be assessed promptly.
$250 USD in 7 days
5.3
5.3

Hello, I can assist with HVAC engineering calculations and technical analysis for your commercial dance and fitness studio, focusing on cooling loads, heat transfer, ventilation, and airflow distribution. My proposed scope includes: - Reviewing the available architectural plans and HVAC system information. - Calculating heating and cooling loads based on occupancy, lighting, equipment, and building conditions. - Evaluating required ventilation rates and airflow distribution for the studio’s intended use. - Preparing clear calculation sheets and a concise technical report. - Identifying any missing information needed to complete the analysis accurately. I understand that the work is urgent and can review the available documents promptly to establish the scope and turnaround time. Please share the project location, floor plans, occupancy, existing HVAC details, and the authority’s requirements for the calculations and professional seal. Any required seal and stamp must be provided by an appropriately licensed professional authorised in the project jurisdiction. Best regards,
$250 USD in 3 days
5.1
5.1

I can assist with HVAC-related thermal calculations, heat-load analysis, and airflow assessments for your commercial dance and fitness studio. I’ll focus on accurate engineering calculations, cooling requirements, and clear technical documentation delivered promptly. Any required seal and stamp must be provided by a qualified, licensed mechanical engineer authorized in your jurisdiction.
$250 USD in 1 day
4.4
4.4

HVAC expertise and mechanical engineering skills make me well suited to perform the thermal calculations your dance and fitness studio requires. I can support analysis involving heat transfer, cooling loads, and airflow, with careful attention to the technical demands of a commercial building. My background also includes SolidWorks and CAD/CAM, enabling me to interpret or produce clear technical documentation alongside the analysis. I approach engineering work with strong attention to detail, data accuracy, and practical solutions, which is important when the results will guide HVAC decisions and occupant comfort. I am ready to apply my HVAC and mechanical engineering skills to this urgent requirement and deliver a clear, technically focused analysis. I would be glad to support your project.
$250 USD in 1 day
3.4
3.4

Hello, I’m a mechanical engineer and can deliver the thermal and airflow calculations for your dance and fitness studio. Studios like this have unusually high loads, so the calculations should reflect that. What I would provide: Heating and cooling load calculation. Envelope gains and losses, plus internal loads. For a fitness space, occupant sensible and latent heat is the dominant factor, so I’d use activity-appropriate metabolic rates rather than office defaults. Ventilation requirements. Outdoor air rates per ASHRAE 62.1 for the dance and exercise areas, and humidity control, which matters in high-sweat spaces. Airflow and distribution. Supply and return airflow per zone, air changes per hour, and duct sizing basics, with attention to comfort and draft control for people exercising. Equipment sizing guidance. Required tonnage, ventilation capacity, and whether dedicated dehumidification or energy recovery is worthwhile. Clear documentation. A concise report with assumptions, formulas, and results, plus a spreadsheet so your team can check every number. To start, I’d need the floor plan or dimensions, location, expected occupancy, class types and schedule, and any existing equipment details. Best regards, Murad
$500 USD in 7 days
2.1
2.1

Hi, Could you provide more details about the specific calculations or analyses needed for your dance and fitness studio? Understanding the existing HVAC system would help tailor my approach. I have over 6 years of experience in mechanical engineering, specializing in thermal dynamics and HVAC systems. My previous projects involved detailed heat transfer and airflow analysis, ensuring energy efficiency and comfort in commercial buildings. I can provide accurate results promptly, and I also hold the necessary credentials to seal and stamp the documents. Let’s discuss your requirements further; I’m available for a quick chat. Best, Dawood Mechanical Engineer
$270 USD in 1 day
1.6
1.6

HVAC design and MEP coordination are central to my work, supported by mechanical engineering and HVAC skills that align directly with your dance and fitness studio’s thermal analysis needs. I can prepare technical CAD/Revit documentation for airflow layouts and coordinated building services, with clear, accurate drawings suitable for commercial project review. My mechanical design background and SolidWorks experience also support precise technical calculations and engineering documentation, while my AutoCAD and Revit capabilities allow the analysis to connect cleanly with the building model and drawings. I understand the importance of fast, dependable work for an urgent requirement and can provide organized native files and PDF deliverables. Seal and stamp services can be addressed according to the applicable professional requirements. I am ready to contribute focused HVAC and thermal-analysis support and would be glad to discuss the project further.
$250 USD in 1 day
0.9
0.9

Hi, My name is Adam. I checked your requirements carefully and understood what you want to do. The key challenge is producing rapid, accurate heat-load, cooling, and airflow calculations for a commercial dance and fitness studio while meeting seal-and-stamp requirements. I will assess occupancy, internal loads, envelope conditions, ventilation, and HVAC capacity systematically, then provide clear, detailed calculations suitable for review and stamping. I can start work immediately and complete asap. Best, Adam
$250 USD in 5 days
0.0
0.0

Hi,sir. I can assist with HVAC-related calculations and technical analysis for your dance and fitness studio, focusing on heat loads, cooling requirements, heat transfer, and airflow. One important challenge in fitness spaces is accounting for high occupant activity, equipment heat, ventilation needs, and changing occupancy levels. I’ll review the available building information and identify the calculations needed to support an effective HVAC design. Regarding sealed and stamped documents, these must be reviewed and approved by a suitably licensed professional in the project’s jurisdiction. I can help with CAD documentation and technical calculations within my scope, and coordinate with a qualified engineer if required. Please share the project location, floor plan, building area, occupancy, and existing HVAC details so the scope and timeline can be assessed.
$250 USD in 1 day
0.0
0.0

Hello, My mechanical engineering and HVAC skills are directly aligned with your urgent thermal analysis for a commercial dance and fitness studio. I can support technical calculations involving heat, cooling, airflow, and the coordination of HVAC systems with the building design. My architectural and engineering background includes coordinating MEP systems within architectural documents, producing detailed plans and sections in Revit and AutoCAD, and performing structural analysis and advanced simulations. This cross-disciplinary experience helps me evaluate thermal and airflow requirements in relation to the actual building layout and surrounding systems. I can provide a focused, technically detailed analysis suited to your immediate needs. Please note that sealing and stamping will depend on applicable licensing and jurisdictional requirements; I can coordinate with the appropriately licensed professional where required. I’m ready to contribute as your mechanical/HVAC engineering specialist. Thanks!
$250 USD in 3 days
0.0
0.0

Hello, I can help with the thermal analysis for your dance and fitness studio, focusing on heat transfer, cooling loads, and airflow to support a comfortable indoor environment. I would review the building details, occupancy, lighting and equipment loads, ventilation requirements, and existing HVAC information to perform the necessary engineering calculations and provide a clear, technically supported report. I understand the urgency and can prioritize the work once the project scope and required deliverables are confirmed. If a sealed and stamped report or calculations are required, the work will need to be reviewed and approved by a qualified, appropriately licensed professional engineer for the project’s jurisdiction. I’m ready to review the available information and help establish the fastest practical path to completion.
$250 USD in 5 days
0.0
0.0

Hi,sir I can help with the heat transfer, cooling, and airflow calculations for your commercial dance and fitness studio. I’ll assess the space, occupancy, heat loads, ventilation needs, and HVAC performance to identify practical solutions. I can prepare a detailed technical report with calculations, assumptions, and recommendations. For the sealed and stamped documents, a properly licensed professional engineer will need to review and approve the work in the project’s jurisdiction. Please share the building plans, location, square footage, existing HVAC details, and any known heating or cooling issues. I’ll review the requirements and confirm the scope and turnaround time.
$250 USD in 5 days
0.0
0.0

Expertise in thermal dynamics and HVAC systems - Proficiency in technical calculations for heat transfer and airflow - Ability to deliver accurate and detailed analysis quickly -seal and stamp
$280 USD in 4 days
0.0
0.0

YOUR BUDGET MATTERS. YOUR TIME MATTERS. YOUR RESULTS MATTER! I'd love to help you with the urgent thermal analysis for your dance and fitness studio. I can perform a comprehensive thermal dynamics assessment, focusing on heat transfer and airflow, ensuring the result meets your specifications and achieves optimal comfort and efficiency. And budget. With my experience in HVAC systems and thermal analysis for commercial buildings, I can confidently handle the work and deliver a professional result, complete with seal and stamp. You'll receive a detailed analysis report, tailored to your needs and preferences, including calculations for effective cooling and airflow management. I can complete the project within the timeframe we agree, with clear communication throughout. What specific temperature ranges are you targeting for the studio's comfort?
$250 USD in 7 days
0.0
0.0

Cerritos, United States
Member since Oct 23, 2026
$250-750 USD
₹100-400 INR / hour
$750-1500 USD
$1500-3000 USD
₹12500-37500 INR
$30-250 AUD
€12-18 EUR / hour
$10-30 USD
$1500-3000 AUD
$30-250 USD
₹750-1250 INR / hour
$250-750 USD
₹1500-12500 INR
₹600-1250 INR
₹600-1500 INR
₹600-1500 INR
$250-750 USD
₹600-1500 INR
$750-1500 AUD
$250-750 USD