Find Jobs
Hire Freelancers

CFD simulation with ANSYS Fluent

$30-250 USD

Lukket
Slået op 2 måneder siden

$30-250 USD

Betales ved levering
I want to simulate liquid spray simulation for small land, the sprayed carrying by a drone. The drone not need to be simulated, and the sprayer should be placed above the ground level of about 5 meters. I want to simulate the liquid fertilizer drift pattern and coverage pattern with changing wind direction and speed. The simulation area should be for small land around 100 meters in length and 50 meters wide. The crops can be represented by small primitive geometric shapes such as cones, and pyramids.
Projekt-ID: 37776884

Om projektet

12 forslag
Projekt på afstand
Aktiv 29 dage siden

Leder du efter muligheder for at tjene penge?

Fordele ved budafgivning på Freelancer

Fastsæt dit budget og din tidsramme
Bliv betalt for dit arbejde
Oprids dit forslag
Det er gratis at skrive sig op og byde på jobs
12 freelancere byder i gennemsnit $142 USD på dette job
Brug Avatar.
Hi there, I am a mechanical engineer with expertise in Design FEA and CFD. I can do the CFD simulation of spraying. Please contact me to discuss it further. Thanks, Ishwar
$140 USD på 7 dage
4,9 (11 anmeldelser)
4,8
4,8
Brug Avatar.
Hello, Spray simulation it is not simple simulation a specially for land 100x50m. Simulation on land on land 5x2m will be the same. What is important it is find radius which spray covered in the different conditions, wind off, wind 5m/s etc. Please take a look my portfolio related to Spray CFD simulation. Feel free to contact me and discuss any questions
$150 USD på 7 dage
5,0 (9 anmeldelser)
4,7
4,7
Brug Avatar.
Hi there, I am a mechanical engineer with expertise in design FEA and CFD. I can do the spray simulation in Ansys. Please contact me to discuss cost and timeline. Thanks, Arati
$140 USD på 7 dage
5,0 (2 anmeldelser)
3,6
3,6
Brug Avatar.
With my 4 years of experience as an Aerospace Engineer and my proficiency in Ansys and Computational Fluid Dynamics, I am confident that I am the right fit for your liquid spray simulation project. My past projects include an analysis on the performance evaluation of a Quadcopter similar to what you're using for your drone, which gives me a unique understanding of how to optimize the simulation towards your goal. Additionally, my involvement in the Analysis of Invelox wind turbine gave me exposure to working with varying wind conditions. My experience has also honed my ability to work with complex geometric configurations similar to what you need for crop representation. Utilizing small primitive shapes like cones and pyramids would be familiar territory for me. By engaging me, not only are you ensuring top-notch simulation with ANSYS Fluent, but also the application of tested concepts from similar projects. Your project will receive meticulous attention to detail and efficient completion from me, mitigating any errors or time-wasting. I'm excited about the opportunity to aid your quest for a fuller appreciation of liquid fertilizer drift pattern and coverage patterns with varying wind speeds and directions on small scale parcels of land.
$140 USD på 3 dage
5,0 (2 anmeldelser)
3,3
3,3
Brug Avatar.
Dear client, I am a professional CAD CAM and CAE design engineer. I am expert in ANSYS FLUENT. I can perform CFD simulation of sprinkler. I hope you contact me as soon as possible. Thanks & regards
$30 USD på 2 dage
5,0 (1 bedømmelse)
2,2
2,2
Brug Avatar.
Hi. Thanks for your posting. I have just read your proposal and I am sure I can complete the project on time. I am a CFD expert who has 15 years of experiences in ANSYS FLUENT CFD. Please contact me to discuss the project in more details. Waiting for your contact now... Thanks. Best Regards.
$100 USD på 3 dage
5,0 (1 bedømmelse)
2,1
2,1
Brug Avatar.
We are a team of Expert Mechanical design Engineers, We have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Manufacturing design • Product design • CAD/CAM • Matlab/Simulink • Simulation like CFD, FEA, structural analysis • Designing tools like COMSOL, SolidWorks, ABAQUS, CATIA, ANSYS, 3DMax We have good command over REPORT WRITING, We can show you many samples of our previous reports. We can discuss further details in the message box.
$250 USD på 7 dage
5,0 (2 anmeldelser)
2,1
2,1
Brug Avatar.
❁Note:-We will give assurance that the project will be completed in a short time, at a low price and with accurate output results.❁ ❁Need to do in the CDF process: To create the solid model or surface model , Import the CFD domain, Zone creation, messing the model, air zone- meshing, selecting the 2D or 3D Dimension, model, velocity, Material selection of zone, cell, zone condition, Boundary conditions: inlet air, control, initialization, run calculation, and results. I have gone through the description, and you are looking for "sprayed carrying-fluent analysis in ANSYS." We are ready to do this project. I have strong knowledge of CDF and CFX analysis processes. We are ready to do this project. We will provide accurate output results for this project. I have 14.5 years of experience in the analysis field. I have strong knowledge of the analysis field: static, dynamic, thermal, vibration, CFD, CFX, fracture, composite material, multibody dynamics, nonlinear analysis, explicit analysis, transient analysis, beam structure analysis, electrothermal, electrochemical, electromagnetic, electrolysis, and nonlinear analysis. Recently/Project: I did: ❖ 1. Analysis of Wind Turbine Blade NACA2412. ❖ 2. Analysis of the Lithium-ion Battery through Thermal Runway-CFD COMSOL. ⭐Design Software⭐:- ✔️1.Ansys.. I assure you that the results will meet your expectations and requirements with the maximum possible accuracy and precision. ❀Ramesh R ❀
$140 USD på 7 dage
5,0 (3 anmeldelser)
1,0
1,0
Brug Avatar.
Hi.. I am CFD expert with 7 years of experience. I have read your project description carefully. I am sure that I can present satisfactory results to you on time. I have many experiences working on similar projects to simulate many drones using Ansys Fluent. If you award me your project, I will do my best and deliver good result to you. Best Regards.
$140 USD på 3 dage
0,0 (0 anmeldelser)
1,6
1,6
Brug Avatar.
With my doctoral degree in Mechanical Engineering, and extensive experience in conducting complex CFD simulations, I am confident in my ability to deliver the results you need for your liquid spray project. My skills with ANSYS Fluent complimented by my proficiency in other software like COMSOL Modules, Minitab and MS Visio, make me uniquely qualified to produce accurate CFD simulations that incorporate the impact of wind direction and speed on spray dispersion patterns. In addition, I have a strong track record of delivering on time and on brief across various projects, as well as an unrivaled commitment to producing high-quality work. Given the importance of this project in giving you valuable insights into the drift pattern and coverage for your crop pesticide application, I will approach your work with meticulousness and precision. Lastly, my deep understanding of geometric modeling enables me to effectively represent different features including the crops in the simulation area. Partnering with me guarantees not just technical expertise but also a spirit of collaboration. Throughout our engagement, you can expect clear communication lines, a flexible approach towards unexpected hurdles plus unwavering commitment to meeting your expectations. I’d be delighted to discuss further details and provide examples from successful similar projects
$200 USD på 7 dage
5,0 (1 bedømmelse)
0,0
0,0
Brug Avatar.
Hello ,Greetings of the day I read thoroughly the project description "CFD simulation for liquid sprayer". I will simulate that liquid sprayer drone to find liquid fertilizer drift pattern and coverage pattern with changing wind direction and speed. i can help you to learn advance analysis systems in ansys and revisions also provided . i have 2years+ experience in design and analysis. Please share further details to done the work. I am a certified Solidworks, Solidedge, Autocad, CATIA v5, Creo, Fusion 360, NX CAD designer and ANSYS CAE & CFD . Eagerly waiting for your message. I am a professional mechanical design engineer and cadd trainer. Education : B.E Mechanical I will provide: 3D modelling of your concept 3D modelling from drawing Drafting & Detailing GD&T Assembly Modelling High quality Real time rendering Dynamic analysis Static analysis Flow analysis Simulation of automotive components Simulation of machineries Optimization of design Load calculation Software proficiency: ANSYS PtcCREO parametric CATIA Fusion360 Siemens NX(Unigraphics NX or NX) SOLIDWORKS Autocad(Mechanical) I can assure you a great satisfaction while working with me. Always my bid is negotiable, and it depends on the required deliverable. Looking forward to hearing from you & feel free to contact me
$135 USD på 4 dage
0,0 (0 anmeldelser)
0,0
0,0
Brug Avatar.
Hello I can do this. Please share the details of the task so that I can check and confirm accordingly.
$140 USD på 7 dage
0,0 (0 anmeldelser)
0,0
0,0

Om klienten

Flag for SRI LANKA
Sri Lanka
0,0
0
Medlem siden mar. 19, 2018

Klientverificering

Andre jobs fra denne klient

android app
$10-30 USD
Tak! Vi har sendt dig en e-mail med et link, så du kan modtage din kredit.
Noget gik galt, da vi forsøgte at sende din mail. Prøv venligst igen.
Registrerede brugere Oprettede jobs i alt
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Indlæser forhåndsvisning
Geolokalisering er tilladt.
Din session er udløbet, og du er blevet logget ud. Log venligst ind igen.