3D Steel Model Quantity Take-Off

@androaiad

Hello, I am a Strucutral engineer with 10+ years experience, I am expert in Structural designs and take off of different structures so i can provide the required quantities in the required time. I have finished similar projects before and finished 600+ projects. Please check my portfolio and reviews. Thanks.

@azraazeen9

As an expert in 3D CAD and design, I have extensive experience that will make me the ideal fit for your project. My expertise in Architectural and Engineering designs, including 2D and 3D modeling, has honed my skills in extracting quantities, identifying structural elements, and generating accurate BOQs - precisely the tasks required for this project. Furthermore, I bring a deep knowledge of various software packages including AutoCAD, Revit, and Tekla--any of which can be employed to increase efficiency. But most importantly, my pedantic approach ensures error-free manual take-offs, minimizing any possibility of missed or incorrect measurements. Additionally, my architectural background provides me with the ability to understand complex structural systems and conventions with ease. Despite this job not requiring Australian-specific knowledge explicitly,I am well-versed with the standards used in commercial and industrial steel packages which will only benefit your project. With me handling your task, you can expect nothing short of a meticulous work ethic combined with highly professional outputs on time.

@kkirandeep582

As someone who encompasses a multi-faceted skill set in 3D Design, Modelling, and Excel alongside a deep-rooted commitment to client satisfaction, I'm confident in my ability to deliver precise and comprehensive results for your 3D steel model take-off project. My experience in manual quantity take-offs will ensure that we capture every single member and plate with meticulous detail, sidestepping any possibility of missing elements. While I lack direct experience with Australian steel conventions, my general understanding of structural steel combined with thoroughness should mitigate that concern. Moreover, my extensive graphic design background instills a habit of paying attention to details which is vital for this task. On top of all this, I'm proficient with Revit and Tekla which gives me the extra edge you are looking for. I genuinely believe it's not just about the accurate recording of quantities but also our ability to present these effectively. With that in mind, I'll supply you with a filterable Excel bill of quantities listing each member and plate line-by-line including section size, length/area, weight and subtotal tonnages. A separate tab encompassing any assumptions or clashes found during the process will further ensure transparency.

@sajjadkhanemon

Hello there, This is Sajjad Khan. I am an Architect with more than 6 years of experience in my field in Design and Visualization, MEP, Structural etc. I am experienced in Revit, Rhino, Twinmotion, 3ds Max, AutoCAD, SketchUp, Lumion, D5 Render and Blender as well. I have recent experience in similar projects also. It’s an interesting project and I am really excited to start working on it. Please Get in Touch with me for further discussion on the project.. Thanks Sajjad Khan

@totoco87

Hi how are you? i am using advance steel i can do this work for you please write for me and send me 3D model i can start work now thank you

@DaniyarS

Hello! My name is Daniyar. I'm a professional Designer on Freeelancer.com. Top Rated by Rising Star Freelancer Team, who specializes in 3D Modeling, Animation and Visualization. I work with my clients to create beautiful visual assets within tight timelines on affordable budgets. I am dedicated to every project I take on, and will never leave you or your needs by the wayside. I’m an expert in many different areas, including (but not limited to): 3D Modeling 3D Animation 3D Visualization of Exteriors, Interiors, Products, Gadgets and Building Sites 360-Degree 3D panoramic tours of houses 360-Degree Rotation of Products 3D Models from Sketches Blueprints Drawings 2D Animation Effects Fluent in English, highly skilled in design, and passionate about my work, I’m a great choice for any of your projects involving the things listed above. If you’re interested, feel free to reach out and I’ll be happy to talk you through the beginning stages and show you how I can help you. Thanks, and have a lovely day!

@umaranimators

With my extensive background and proficiency in 3D Design, Modelling, and CAD/CAM, I'm confident I can provide exactly what you need for your 3D Steel Model Quantity Take-Off project. My strong grasp on modeling techniques can help me identify, measure, and extract necessary information manually with precision – a necessity given the lack of metadata. While familiar with Navisworks, Tekla, Revit, and Advance Steel, I am absolutely committed to making this process as smooth as possible for you by adapting to your preferred workflow. Your focus on accuracy aligns perfectly with my approach. My previous experience working on complex modeling projects has honed my attention-to-detail skills so as to deliver not just any 3D model but a well-researched, flawlessly refined piece that meets the highest industry standards. Although I may lack specific experience with Australian steel packages, my adaptability and willingness to dig deep into project requirements make me confident that I can quickly understand and incorporate all regional connection and fabrication conventions necessary. My commitment to your satisfaction extends beyond just the deliverables – I'll provide added value through comprehensive comments noting any assumptions or clashes discovered during the process. Consider partnering with me to bring your 3D Steel Model Quantity Take-Off project to life in an exceptional way!

@edwina245

Hello, I have experience completing structural steel quantity take-offs from 3D models, including member identification, plate measurement, section sizing, weights, and Excel BOQ preparation. I am interested in this project because it requires careful manual review of the Navisworks geometry rather than relying on incomplete metadata or automated exports. I will open the model, measure each visible steel member and plate, classify the sections, calculate lengths, areas, weights, and subtotal tonnages, then organize everything in a clean filterable Excel file. I can also use Tekla, Revit, or Advance Steel if it improves checking, while keeping the final BOQ based on verified manual take-off. I will include a comments tab with assumptions, unclear items, and any clashes noticed during review. Thanks for reading my proposal. Edwin

@DAOMANHTUNG

Hi! I have extensive experience in structural steel detailing and manual quantity take-offs from 3D models. I can accurately identify every member and plate and deliver a clean, reliable Excel BOQ. Similar Australian steel project: https://www.freelancer.com/portfolio-items/11148678-steel-detailing-service-australia

@anjalio22

I would appreciate the opportunity to work on your 3D steel quantity take-off project. I understand that the Navisworks model contains geometry only, so I will manually identify every steel member and plate, measure the required dimensions, and prepare an accurate, well-organized Excel BOQ. My deliverables will include a filterable Excel schedule with section sizes, lengths/plate areas, individual weights, and subtotal tonnages, along with a separate comments sheet documenting assumptions, observations, and any clashes found during the review. I can also use Tekla, Revit, or Advance Steel where appropriate to assist with interpretation while ensuring the quantities are based on manual verification. I am committed to accuracy, thoroughness, and timely delivery. Every item will be cross-checked against the model to minimize omissions and ensure the BOQ reconciles with spot checks. Give me one opportunity to handle your project. I assure you that I will complete the work with full dedication, accuracy, and professionalism, delivering a reliable BOQ that meets your requirements.

@atikmurtaza

Your project requires extracting accurate steel quantities from a Navisworks model rather than only viewing 3D geometry, so the focus is on manual take off, structural member identification, and producing a reliable BOQ. I can review the Navisworks model, identify steel members and plates, extract required dimensions, calculate quantities, and prepare a structured Excel BOQ with sections, lengths/areas, weights, and assumptions. I’ll ensure the schedule is clear, filterable, and aligned with the model for fabrication and review purposes. Could you please confirm the Navisworks file format/version and whether steel section libraries or material densities are already defined in the model for accurate weight calculations?

@joshuajsaunders

Completing a take-off from a 3D model with only raw geometry can be quite tricky. Without the right metadata, you risk missing important members or miscalculating weights and areas. This can lead to discrepancies that affect project timelines and budgets down the line. I can meticulously measure and identify each visible steel member and plate from your Navisworks model. By doing this manually, I’ll ensure the accuracy you need for a reliable Excel bill of quantities. I can also adapt the model into Tekla or Revit if that helps streamline the process, leading to a clear, filterable output that meets your specifications. I’ve tackled similar projects before and understand the importance of precision. I will provide revisions to ensure that you’re completely satisfied with the final deliverables. What’s your timeline for this project? Are there any specific assumptions or standards I should keep in mind?

@mirsaeed24

Hi, Working on large EPC industrial projects and preparing Material Take-Offs (MTOs) for structural steel and mechanical packages has given me the attention to detail and systematic approach needed for your project. Combined with my experience collaborating with Australian engineering and manufacturing teams, I'm confident I can produce an accurate and reliable manual steel quantity take-off from your Navisworks model. I'm a Mechanical Engineer with over 15 years of experience using Navisworks, Autodesk Inventor, AutoCAD, Revit, and Excel. I can manually identify each structural member and plate, verify dimensions directly from the model, calculate lengths, areas, and weights, and prepare a clean, well-structured Excel BOQ with filterable columns, subtotals, and total tonnage. I'll also include a comments sheet documenting any assumptions, discrepancies, or clashes identified during the review. My focus is on delivering a complete and accurate take-off that reconciles with the model and can be used confidently for estimating, procurement, and fabrication planning. Best regards.

@olenav24

Dear client, I understood you are looking for a **structural steel detailer** to manually measure and identify every steel member and plate from your Navisworks model and prepare an accurate Excel BOQ. As a young structural CAD specialist with over 5 years of experience, I can perform a detailed manual take-off using **Navisworks, Advance Steel, Revit, or Tekla**, delivering a well-organized Excel schedule with section sizes, lengths, plate areas, weights, subtotals, and a comments sheet documenting assumptions and any detected clashes. You can review my portfolio here: https://www.freelancer.com/u/olenav24 Looking forward to working with you. Olena

@manojs408

Having worked extensively with 3D modeling tools such as Solidworks, Inventor, AutoCAD, Revit, Sketchup, and 3DMax, I am confident in navigating and interpreting your Navisworks-based 3D steel model efficiently. More importantly, my proficiency in manual measurements gives me an edge because it ensures meticulousness and a greater attention to detail. I can guarantee that the quantities I provide will reconcile perfectly with the models, leaving no room for missing elements. Lastly but of paramount importance is my commitment to delivering excellence; whether it's for product design or architectural drawings, I strive for complete client satisfaction and won't cease working towards a 100% successful delivery. That being said, not only do I assure absolute accuracy in my calculations but also a comprehensive Record sheet of each member, section size,length/area,weight and overall tonnage estimation which you need.I'm ready for this challenge!

@arjunc5577

Hello, I am a Mechanical Engineer with 16+ years of experience in structural steel fabrication, site execution, and technical estimation. I specialize in taking raw engineering inputs—whether 2D drawings or raw 3D models—and translating them into precise, line-by-line Excel Bills of Quantities (BOQ). Here is my approach for your project: - Raw Model Measurement & Identification: Open the Navisworks model (via Navisworks/Autodesk Viewer) to manually measure members, identify section profiles (AS/NZS standards), and extract plate geometries. - Line-by-Line Manual BOQ: Record structural elements and connection plates line-by-line to calculate lengths, surface areas, unit weights, and subtotal tonnages. - Clean Deliverable: Deliver a structured, filterable Excel 2016+ spreadsheet (no macros or locked cells) ready for spot-check reconciliation. - Assumptions & Clash Log: Include a dedicated comments tab detailing geometrical clashes, profile assumptions, or visual limitations in the raw model. Assumptions & Exclusions: Scope is limited strictly to manual measurement & BOQ extraction; 3D re-modeling, CAD editing, or detail drafting are excluded. I am ready to start immediately and focus on high-accuracy MTO output. Best regards, Arjun Chavan

@alih0706

Hello! I can perform a thorough manual quantity takeoff from your Navisworks structural steel model, identifying every steel member and plate by carefully measuring and interpreting the geometry rather than relying on embedded metadata. I'll verify section sizes, lengths, plate areas, and calculate accurate weights to produce a comprehensive, well-organized Excel BOQ suitable for fabrication, estimation, or procurement. I work with Navisworks, Tekla Structures, Revit, and Advance Steel, allowing me to efficiently inspect the model while maintaining manual verification for accuracy. You'll receive a filterable Excel schedule with section sizes, quantities, lengths/areas, weights, subtotal tonnages, and a separate comments sheet documenting assumptions or any clashes identified. I prioritize accuracy, consistency, and complete model coverage to ensure no structural elements are missed.

@ProfessorVats

Hi, I’m ProfessorVats. I reviewed your project “3D Steel Model Quantity Take-Off” and can help deliver it with clear communication, tested work, and regular progress updates. I’m ready to discuss the requirements and begin right away.