I gang

arduino programmer

Develop arduino software for application;

The IMU alarm is an arduino based alarm system that has an audible, visual and relay controlled feedback if a change in a preset orientation exceeds a number of degrees.

Detailed Description

The IMU alarm is designed to make a user aware if a sensor is tilted more than a preset number of degrees. The sensitivity and accuracy of the unit is important and resolution to 1 degree is essential. After the instrument is powered up the sensor is aligned to a specific orientation. A calibration button is used to record and store this orientation.

A change in orientation of a preset number of degrees will sound a momentary or latched alarm (visual, audible or relay). An attractive option would be a graphical or LED display demonstrating the actual orientation in the X,Y,Z axis.

The reference axis as calibrated can be reset at any time by pressing the calibration button.

Operation description for Handpiece IMU alarm unit.


Operation

1. Turn Power on unit
2. Display name, self test and calibration (Kaironav v1.***, self test, calibration 2s)
3. Allow Bn055 to settle and output coordinate data
4. Display (calibration complete 2s, tolerance xdeg)
5. Display (hold handpiece in reference orientation and press ref[s1])
6. On pressing s1 (momentary) save reference coordinates (lost on power off)
7. Display ref saved
8. Press s2 (Display menu) toggle exit menu
9. Use encoder to scroll up/down menu
10. – Menu list (save on power off)
a. Alarm
i. Motor control [relay] on/off
ii. Audio on/off
iii. Led on/off
b. Tolerance (deg)
i. 1
ii. 2
iii. 5
iv. 10
v. 12
vi. 15
vii. 20
viii. 25
ix. 30
c. Hysteresis adjustment (deg)
i. 1
ii. 2
iii. 5
11. Press s3 to toggle through options
12. Press s4 to save selection
13. Display bargraph on display as bno55/handpiece orientation reaches reference position as meeting bar (coming from either end like old magic eye vu meter) top line of display for x and bottom for y.
14. When handpiece orientation is to with in 1 degree +/- tolerance(may need hysteresis adjustment here) then alarm/relay/led hold for 3 seconds – longer if reference maintained
15. S5 bypasses relay alarm – toggle switch
16. Once handpiece orientation is out of reference alarm/relay/led off*


Calibration





• Possibly have audible alarm of varying frequency as it approaches tolerance


Resources;

Arduino UNO
IMU Bno55 - breakout from Adafruit with application libraries; Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055 PRODUCT ID: 2472

Hardware framework Mega box from Altronics.com.au K9670 (not specific –can be breadboarded)
S1-S4 momentary illuminated (S1 can also be foot switch in parallel
Rotary encoder
Display 2 line 16 character LCD
S5 Mini DPDT toggle hardware switch


Requirements;

Arduino code for system
Possibly PCB layout later for main unit and bno55


Copyright 2017

Neil Meredith

Færdigheder: Arduino, Programming

Se mere: i need online programmer to develop an app, i need a programmer to develop an app, hire an arduino programmer, finding a programmer to develop an app, programmer for an arduino in houston needed, i need to hire an arduino programmer, i need a programmer to develop an app in nz, how to hire a programmer to develop an app, how to find a programmer to develop an app, how can i find a programmer to develop an app from india, help i need an arduino programmer, find an arduino programmer, programmer develop iphone app, non programmer develop app iphone, easy non programmer develop iphone

Om arbejdsgiveren:
( 0 bedømmelser ) palm cove, Australia

Projekt-ID: #15069772

Tildelt til:

sagradoamicus

Hi I am an expert arduino developer with more than 8 years of experience in this field. I can do it for you. Please get in touch to discuss it further I am waiting for your reply to start Relevant Skills and Experien Mere

$2000 AUD in 25 dage
(82 bedømmelser)
6.8

26 freelancere byder i gennemsnit $2109 for dette job

$2500 AUD in 30 dage
(39 bedømmelser)
6.4
chandra2sekhar

Hello, I am [url removed, login to view] sekhar,[url removed, login to view],[Phd].we have 12 years experience in this field.i can assure u support and service even after completion of [url removed, login to view] have inhouse PCB design and fabrication. Relevant Skills and E Mere

$1578 AUD in 30 dage
(7 bedømmelser)
6.4
$2500 AUD in 30 dage
(13 bedømmelser)
6.0
Anthony989

Hello, I am Anthony from Sri Lanka and I am a FULL time freelancer.I have necessary experience and knowledge to complete this project successfully. Relevant Skills and Experience I can give you very perf Mere

$2000 AUD in 30 dage
(12 bedømmelser)
5.6
shahbaz1980

Hello, I am Shahbaz Ali, representing a research and development based company "ITECH". We have already developed such IMU. We are happy to ship you the required IMU Please feel free to contact us. Regards, Shahbaz.

$3000 AUD in 30 dage
(14 bedømmelser)
5.3
ahmad5857

Hi Sir, We have a good experience with various IMU chips for intertial management units, we used these chips in various customized boards to get optmized performances Lets talk to us in details. Relevant Skills and Mere

$1500 AUD in 5 dage
(23 bedømmelser)
5.1
maxbul

Dear sirs I have made the similar devices (mostly based on MPU6050) in the past. I work with more than 20 different models of displays and can propose you a good solution. Relevant Skills and Experience I work with Mere

$1800 AUD in 10 dage
(34 bedømmelser)
4.9
amelectronics

Hello I have experience in designing electronics circuits and can make your project. I will make your project practically on breadboard and will provide you circuit, code and PCB design. Thanks Relevant Skills and Exp Mere

$2000 AUD in 30 dage
(9 bedømmelser)
4.6
zdesign77

Hey, how’s it going? My name is Mike, I’m a Web Designer & Developer from Boston. I've had a look at your project description and feel that my skills match your requirements perfectly. Relevant Skills and Experience G Mere

$2500 AUD in 30 dage
(5 bedømmelser)
4.7
muhanddis

Hi, I am an expert Arduino Programmer with previous experience with IMU sensors and Visual Displays. (LED, LCD etc). I will give you an Alarm with audible, visual (3D Graphic/mech), relay feedback. Relevant Skills and Mere

$1500 AUD in 30 dage
(11 bedømmelser)
3.8
pavanshah2001

I have experience with IMU interfacing with various micro controllers. I can have the calibration button, have the actual display as mentioned by you. I have product design experience based on imu Relevant Skills and Mere

$2000 AUD in 30 dage
(5 bedømmelser)
3.8
king18yat

No advance payment is needed . I shall provide daily updates . I can manage template designs too. Relevant Skills and Experience I shall like to work on this Arduino job. Proposed Milestones $3000 AUD - 1

$3000 AUD in 42 dage
(2 bedømmelser)
3.5
rojuwon1222

I have almost 13 years of experience in development of products including the custom electronics. I am an expert in the field of the Embedded System, PCB design and firmware development Relevant Skills and Experience Mere

$2500 AUD in 30 dage
(2 bedømmelser)
3.7
JunaidAhmad92

Dear Employer, I am an experienced electeical engineer having expertise and advance skills in arduino programming and circuit designing. I will design circuit and write code and deliver it to you with video of working Mere

$1666 AUD in 7 dage
(5 bedømmelser)
3.4
jeddy1515

Hi, I am an electrical engineer with 5 years of experience in embedded industry. I can design this IMU alarm on Arduino with Touch screen display. Accuracy will be depend on the resolution of sensor. Relevant Skills Mere

$1722 AUD in 19 dage
(3 bedømmelser)
3.4
bogdan2451629

Hello. I can do it. Your task is clear. Already worked with IMU sensors like mpu6050. I can do both hardware prototype and coding you will recive ready and working device. Relevant Skills and Experience 6 years hardwa Mere

$1500 AUD in 30 dage
(7 bedømmelser)
3.3
seshupower

A proposal has not yet been provided

$3000 AUD in 30 dage
(1 bedømmelse)
3.0
iTinkerBell

Hello. I can do this Relevant Skills and Experience I have many experience in Arduino programming Proposed Milestones $2500 AUD - default milestone

$2500 AUD in 30 dage
(1 bedømmelse)
2.4
slavaten

Hello, I have a good expirience with IMU and Arduino. Соответствующие навыки и опыт More than 5 years working with different IMU (MPU6050, LIS331, FXOS8700). Including filtration and correction using gyro and magneto. Mere

$1500 AUD in 30 dage
(1 bedømmelse)
2.5
soltracker

How r u?sir,,,its me imad,,,have done 200+ projects on arduino, matlab, visual basic, .Net, PHP and HTML, u will feel brotherhood,,,,,,,,,,,,,,, Relevant Skills and Experience arduino matlab vb.net sensor interfacing Mere

$1500 AUD in 30 dage
(8 bedømmelser)
2.1