Dual Oven PLC Control System

@hayteekeys

HI, KINDLY READ THROUGH MY PROPOSAL I will deliver a complete turnkey PLC-based automation solution to control your two independent ovens, including hardware selection, electrical design, PLC programming, HMI recipe management, and commissioning support. MY APPROACH
 ✅ Phase 1: Review load data and recommend optimal PLC (e.g. Siemens or Mitsubishi), HMI, power electronics, and sensors for reliable thermal control.
 ✅ Phase 2: Develop electrical schematics, panel layout, PLC ladder/FBD logic, and polished HMI screens with recipe handling.
✅ Phase 3: Parameterized recipe storage, alarm management, testing, remote commissioning support, and operator documentation. RELEVANT PROJECTS • Multiple industrial oven, furnace, and thermal process control systems with recipe management on Siemens and Mitsubishi platforms. • Strong experience in safe power control, PID/temperature regulation, and user-friendly HMI interfaces. DELIVERABLES • Full electrical schematics, panel layout, and BOM • Complete PLC program and HMI application • Parameterized recipe system and operator manual QUESTIONS 1 Can you share the oven load specifications (power rating, heating elements, voltage, temperature range)? 2 Any preferred PLC brand or budget constraints? 3 What is the expected duty cycle and number of recipes needed? Ready to start immediately. I can provide the full package from design to commissioning with proven reliability for thermal processes.

@stolzenterprises

The professional with 16 years of experience in Industrial Automation. Development,Commissioning of PLC Control System, HMI and SCADA^^ ◾ PLC-Siemens [S7-1500F/H, S7-400, S7-400F/H/R, S7-300, S7-1200, S7-200, S5, TI PLC, LOGO!] Rockwell [(Allen Bradley)- SLC500,MicroLogix,CompactLogix.] Schneider [Zelio, M171/72] Automation Direct [DirectLogic Click PLC] Unitronic [V200-18-E3XB Controller] Delta [Delta DVP ES2] ◾HMI-Siemens ** Weintek ** Kinco ** Unitronics ** Hitachi ** Schneider ** Wecon ** DeepSeaElectronics ◾SCADA -WinCC ** In-Touch Wonderware ** Citect ** Ignition ◾ Industrial Networks-PPI-MPI ** Profibus ** AS-i ** Profinet ** Ethernet ** Modbus RTU/Modbus TCP ◾ OPC -PC Access ** OPC Scout ** OPCUA ** Metrikon ** Kepware ◾ Project Documentation-ISA88/95, GAMP, 21CFR Part11, VP, URS, FRS, DS, IQ, OQ, PQ, SOP. ◾ Programming Languages -C# ** VBA  ** VB.net ** Javascript ◾ Raspberry pi ** Raspi Camera ◾ Networking Devices - Siemens scalance, Teltonika, Waveshare Modbus Gateway, Moxa Gateway

@cesur135

As an experienced Automation Engineer with deep proficiency in PLC, HMI and electrical circuit design, I am uniquely positioned to offer you the comprehensive solution you need for your Dual Oven PLC Control System project. Throughout my career, I have successfully executed a wide array of automation projects including Waste Water and Water Treatment Plant, Chocolate Machine Lines and Industrial Ventilation Systems as well as Thermal Processes make me a valuable asset for your project. Drawing on my experience with world-class brands Siemens, Allen-Bradley, Mitsubishi, and Delta, I have the ability to expertly navigate different platforms and recommend the best fit for your project's duty cycle, safety requirements, and budget. With my extensive proficiency in the SIEMENS TIA Portal program, Simatic Manager program I can provide all the necessary electrical schematics, panel layouts and corresponding software for seamless operation, alarming handling, diagnostics and importantly - a parameterized recipe storage system that will streamline any future modifications without needing to rewrite the entire code. It is worth noting that I believe in providing comprehensive service to my clients – from component selection to final system tuning.

@alluankit01

Hi, I can design the complete PLC-based dual oven control system, including hardware selection, electrical schematics, PLC logic, HMI screens, recipe management, alarms, diagnostics, and startup support. The best solution is to first review the oven load data, heater ratings, sensor type, voltage/current limits, safety requirements, and preferred budget. I’ll then recommend a suitable PLC/HMI platform, define the control architecture, create the electrical panel design, and develop parameterized PLC logic so each oven can run independent recipes without code changes. I’m comfortable with PLC automation, HMI recipe systems, thermal process control, temperature sensors, SSR/contactors, voltage/current monitoring, alarm handling, electrical schematics, panel layouts, BOM preparation, and remote commissioning support. Deliverables will include: * PLC and HMI hardware recommendation * Electrical schematics * Panel layout * Complete BOM * PLC program for two ovens * HMI screens for recipes and alarms * Temperature, soak time, voltage/current limits * Independent oven operation * Diagnostics and safety interlocks * Operator manual * Remote power-up support I’ll focus on a safe, reliable, and easy-to-use oven control system that operators can manage directly from the touchscreen. Best regards Ankit

@Hachemked

I'm an Automation Engineer with extensive experience in Siemens PLCs, TIA Portal, HMIs, PID temperature control, and industrial automation. I've developed complete control systems for pumps, HVAC, water treatment, conveyors, and industrial machines, where reliability and process stability were essential. For your dual oven project, I can provide: Siemens PLC programming (LAD/FBD/SCL) Independent PID temperature control for both ovens HMI design for setpoints, monitoring, alarms, and recipes Heater sequencing and safety interlocks Alarm handling for sensor faults, over-temperature, and emergency stop Clean, modular, and well-documented code for easy future maintenance My experience also includes VFD integration, analog I/O, RTD/thermocouple signal processing, industrial communications, and complete electrical design using EPLAN. I always develop structured, scalable programs that are easy to troubleshoot and expand. I'm confident I can deliver a reliable oven control system that operates safely, maintains accurate temperature control, and is ready for commissioning. I look forward to discussing your project. Best regards, Hachem K. Automation Engineer | Siemens PLC | TIA Portal | HMI | PID Control | EPLAN

@anjalio22

I would appreciate the opportunity to handle your dual oven PLC automation project. I have experience in designing and commissioning industrial automation systems, including PLC/HMI programming, electrical control panels, thermal process control, and recipe-based automation. I can deliver a complete solution covering PLC and HMI selection (Siemens, Allen-Bradley, Mitsubishi, or another suitable platform), electrical schematics, panel layout, BOM, PLC logic, HMI recipe management, alarm handling, diagnostics, and parameterized recipe storage for temperature, soak time, voltage, and current limits without requiring code changes. I will also provide remote commissioning support, system tuning, and a clear operator manual for daily operation and maintenance. Before starting, I'll review your oven load details, heating elements, sensors, power ratings, and safety requirements to recommend the most reliable and cost-effective hardware. My focus is on delivering a stable, user-friendly, and scalable control system on time with professional support throughout the project.

@NEHABHAT92

As a seasoned professional in the world of automation with over 9+ years of hands-on experience, I can confidently say that your project aligns perfectly with my skill set and expertise. Not only have I successfully developed and implemented complex control systems like the one you are envisioning for your dual oven PLC, but I have also demonstrated my ability to provide a full package solution - right from component selection through final tuning - to ensure operational efficiency and cost-effectiveness. Moreover, my understanding of thermal processes and familiarity with platforms such as Siemens, Allen-Bradley, and Mitsubishi enable me to tailor-make a solution closely in line with the specificities of your project. This includes providing parameterized recipe storage capabilities along with an intuitive HMI touchscreen interface that would allow recipes to be easily modified without any need for rewriting code. My company also prides itself on offering reliable remote support during initial power-up, extensive customer service post project completion, and operational handbooks that simplify routine usage and maintenance – all fitting seamlessly within your project requirements. Should you choose me for this job, you can rest assured that I'll deliver undeniably high quality work while staying conscious of your budgetary needs. So why wait? Give us a chance to turn your idea into reality!

@ridwaan6254

IF YOU'RE NOT HAPPY, YOU DON'T PAY. I recently completed a project automating an industrial oven system that resulted in a significant reduction in manual oversight and improved efficiency. I understand you need a complete PLC-based solution for dual ovens with user-selectable recipes and a touchscreen interface. I will ensure the system is clean and user-friendly, enabling operators to easily manage recipes without manual switches. I will recommend suitable PLC and HMI options tailored to your requirements, focusing on safety and budget. I focus on good planning, clean and maintainable code, clear communication, on time delivery, and reliable long term solutions. I am confident in my ability to deliver a comprehensive package that meets your needs. If this aligns with your project, feel free to reach out to discuss scope and pricing. WORST CASE SCENARIO YOU WALK AWAY WITH A FREE CONSULTATION. Regards ridwaan6254

@eternitech

Hi, For a dual oven PLC control system, ensuring precise synchronization between the ovens' operations and user-defined recipes is crucial to prevent thermal inconsistencies. I'd start with designing a modular PLC architecture that allows easy updates to recipes and parameters. Can you share the specific PLC brand or model you plan to use?

@bhargav922002

Hello, I'm bharghav, with 10 years of experience in Electrical Engineering and Programming, specializing in industrial automation and control systems. I possess a strong background in designing and implementing robust PLC solutions. I understand your need for a complete PLC-based control system for your dual ovens. I will design the electrical schematics, select suitable components (PLC, HMI, power electronics), and develop the PLC program and HMI screens for recipe management, alarms, and diagnostics. The recipe storage will be parameterized, allowing easy modifications without code changes. Let's start a chat to discuss your project in more detail.

@hlomlan

Automating your dual ovens presents an exciting challenge, especially in creating a seamless user experience with a touchscreen interface. I understand the need for reliability and ease of use, ensuring operators can manage recipes without manual switches or additional software. To address this, I propose a tailored PLC solution that includes robust programming for recipe management and safety features. I'll focus on developing clear electrical schematics and a user-friendly HMI, allowing for easy adjustments to temperature and soak times. My experience with Siemens and Allen-Bradley systems ensures I can recommend the best fit based on your load data. I prioritize open communication and reliability, delivering high-quality work on time. I offer a free consultation to discuss your vision and clarify any details needed to move forward. What specific features or functionalities do you envision for the touchscreen interface?

@sandipm1307

My name is Sanjay, and I have years of experience in the field of industrial automation. Your project aligns perfectly with my skill set and passion for providing robust automation solutions that improve process efficiency. I am well-versed with various PLC and HMI platforms including Siemens, Allen-Bradley, and Mitsubishi that could suit your oven automation needs. Throughout my career, I have integrated PLCs with diverse systems like Python, Node-RED, Google Sheets, and cloud-based systems such as MQTT to provide real-time monitoring, data logging, and remote control capabilities. I believe this level of specialization will greatly benefit your project as it requires parameterized recipe storage that can be easily modified without touching the original code. Moreover, I understand how essential it is to provide not just a functional system but also one that is easy to understand and maintain. With this in mind, my deliverables would include comprehensive electrical schematics, a clear panel layout, detailed BOM and an operator manual explaining not only the routine usage but also the necessary maintenance steps for your dual oven system. Lastly, my full-stack expertise allows me to offer remote support during initial power-up ensuring you have a smooth implementation process. I look forward to collaborating with you with an aim at providing you with an automated dual oven system t

@Habib821

Hello, I hope you're doing well. I've delivered several PLC-based machine controls and operator HMIs for thermal equipment. On a recent oven line I wrote a recipe-driven S7 program with PID loops tuning temperature from K-type thermocouples and SSR control, and handled recipe storage in CSV on an HMI. I'd start by reviewing your load data, pick a PLC (Siemens S7-1200 or CompactLogix), specify SSRs, RTDs/thermocouples and Modbus HMI, then draft schematics and BOM. Could we have a short call to confirm the oven load figures and recipe fields? Thank you, habib Niazi

@WahyuEfendi17

​Hi there, ​I have reviewed your requirements for automating two independent ovens with a complete PLC and HMI solution from scratch. I specialize in thermal process automation, electrical design, and PID control systems, and I can deliver a full turnkey package tailored to your exact load specifications. ​Here is what I will provide: ​- Electrical Design & BOM: Complete electrical schematics, panel layout, and a full Bill of Materials with clear component specifications. ​- PLC & HMI Programming: ​Independent PID temperature control loops for both ovens. ​- Fully parameterized recipe storage on the HMI (Temperature, Soak Time, Voltage/Current Limits) with no code rewrite required. ​- Alarm handling and basic diagnostic screens. - ​Hardware Recommendation: Complete selection of PLC/HMI (Siemens S7-1200 / Mitsubishi FX5U), SSRs/Thyristor power controllers, and current/voltage transducers. ​ Commissioning & Manual: Remote support during initial power-up/PID tuning and a concise operator manual. ​To finalize the hardware sizing and electrical schematics, I just need a few details: ​What is the heating power capacity (kW) and voltage/phase rating for each oven? ​What is the maximum operating temperature required? ​Do you have a preferred hardware brand (Siemens, Mitsubishi, Allen-Bradley, etc.)? ​Please find attached my detailed PDF proposal. I look forward to discussing your project timeline and getting started! ​Best regards, Wahyu Efendi Ardiyanto

@koreshubham2002

Scope of Work: Bill of Material (BOM/BOL) Selection and Finalization PLC Program Development and Commissioning HMI/SCADA Screen Development and Integration Field Device Integration and Communication Setup Testing, Troubleshooting, and On-Site/Remote Support Documentation and Backup Handover

@deepaki1

29+ years of experience in Electronics and Embedded and Software Products and Services. Hands in experience on hardware design and development, firmware architecture and coding and GUI.

@Mohamedshaker10

Hi, I am an Electronics Design Engineer with experience in analog and digital circuit design, PCB layout, and simulation. I can carefully analyze your small signal circuit, provide accurate calculations, and deliver a clean, well-documented solution. I focus on quality, clear communication, and on-time delivery. I am ready to start immediately and ensure the project meets your requirements.

@Espinoza0921

Hello, Thank you for sharing your project requirements. I have extensive experience in industrial automation, PLC programming, HMI development, and complete machine integration. I have worked on projects involving thermal process control and have previously developed a similar oven control system, including recipe management, temperature control, and operator interfaces. I can provide a complete solution, from selecting the most suitable PLC, HMI, sensors, and power components to designing the electrical schematics, panel layout, PLC software, HMI screens, recipe management, alarms, and commissioning support. Before recommending the hardware platform (Allen-Bradley, Siemens, Mitsubishi, or another option), I would like to review the oven specifications, heating load, power requirements, sensors, and any safety requirements so I can propose the most reliable and cost-effective solution. I would be happy to discuss the available options with you and help define the best approach for your application. I am confident I can deliver a robust, scalable, and easy-to-maintain system. I look forward to hearing from you. Best regards, Juan Espinoza Automation Engineer

@CRasika

HI I can provide the service you are looking for. • All the relevant drawings, with proper markings according to the standards. • PLC program and HMI program. Siemens, AB, Mitsubishi, or any other low-cost brand if you are looking for • All the settings will be mapped with the password to the HMI and can be changed with proper authority. • 24 x 7 support can be given without any additional cost.