Annulleret

Complex PrinterListing Procedure (needs not be nice, but very functional) For BrainRich

This project asks you to create database tables,

a dataentry routine for these tables (dynamic html)

and a dataquery routine for these table

Attention: This is highly complex stuff, but if you are experienced with dependent tables then probably it's a piece of cake.

So PLEASE bid only if you are highly experienced in this kind of stuff.

Please also refer to the detailed briefing here

Price for an experienced person should be more to the 300 $ area

Detailed briefing (Sorry for lenght here, but upload button didnt work:

Flyer/Poster Printer Website

General Requirements:

It includes various tables (MySQL) and should be created and queried with php 4.3. Some AJAX needed.

The whole thing does not need to be particularly nice, as it will be included into a dynamic website that already has templates and css. The inclusion will be done by us.

What we need is the functionality (tables, php, AJAX, html and html generation for the various forms)

The big difficulty stands in the dependency that exist between possible choices offered by the various printers.

THE TABLES

For each Product-Family a printer creates we need tables involved as follows:

PAPERFORMATS

The printer can offer various Paperformats that the buyer then can choose from:

DIN-A6 (105 x 148 mm) Hoch- bzw. Querformat

DIN-A4 (210 x 297 mm) Hochformat

DIN-A5 (148 x 210 mm) Hoch- bzw. Querformat

DIN-A7 (74 x 105 mm) Hoch- bzw. Querformat

DIN-A8 (52 x 74 mm) Hoch- bzw. Querformat

DIN-Lang (105 x 210 mm) Hoch- bzw. Querformat

120 x 120 mm Hoch- bzw. Querformat

105 x 105 mm Hoch- bzw. Querformat

85 x 55 mm Visitenkartenformat Hoch-bzw Querformat

content of table:

id of product family

id of Format/s (name then to be looked up in a PAPERFORMATS_CHOICES table where id gets associated with name, width, height, area (=width x height))

for each format:

- incluence on base_price (additive)

- incluence on base_price (multiplicative)

- incluence on piece_price (additive)

- incluence on piece_price (multiplicative)

PAGENUMBERS

Then the printer can offer various pagenumbers that the buyer then can choose from:

1 page (only front printed) ("poster")

1 | 2 pages (front only or front and back printed) ("flyer")

4 | 6 | 8 | 10 | 12 ("folder")

4 | 8 | 12 | 16 | 20 | 24 | ..... maxvalue (to be dividable by 4) ("brochure")

Dependancy here is usually (!) on the Paperformat (e.g. small sizes like 52 x 74 cannot be in "brochure")

content of table:

id of product family

id of group/s (poster, flyer, etc) (name then to be looked up in a PAGENUMBERS_CHOICES table where id gets associated with ENUM of choices like "1" or "4|6|8|10|12" and the respective wariable to be used in the calculations (here "1" or "4|6|8|10|12", so corresponding))

for each group chosen:

- options (available options: 1 | 2 or | 4 | 6 | 8 | 10 | 12 or whatever then specified by printer)

- incluence on base_price (additive)

- incluence on base_price (multiplicative)

- incluence on piece_price (additive)

- incluence on piece_price (multiplicative)

- Dependend on which table/s (*)

- dependency_specs (if "folder" max number of pages like either 8 or 10 or 12, or if "brochure" again max number of pages)

The (*) "dependend on which table/s" need to work like this:

So, say, the printer can create entries into the PAGENUMBERS table for product family XYZ which go:

XYZ brochure-id max 64 +15,00 1,0000000 +0,000001 1,0000000 PAPERFORMATS "here list of id's like "13|14|15" which must be sublist of choices made by printer in the PAPERFORMAT table"

XYZ poster-id empty +0,00 1,1000000 +0,000000 1,2500000 PAPERFORMATS "here list of id's like "13|14" which must be sublist of choices made by printer in the PAPERFORMAT table"

Explanation:

So the printer created two different subsets here. The first says that

for his new Product-Family XYZ he wants to offer brochure-type products

that may have max number of pages of 64

Each extra page costs an extry 15,00 Euros and adds 0,000001 Euros for each sqr meter of area printed (we come to the formula later)

However, this option is available only when the buyer choses a paperformat of id's 13 or 14 or 15

Then the printer wants another product in the same family (posters) that do not add to the whole price but have a multiplicative effect on base price and per-piece price.

This second product-sub-set (posters) is available only on formats 13 and 14

Next:

PAPERTYPE

The printer can offer all this on various paper types

90g/m² Bilderdruck matt

90g/m² Kopie-/ Inkjet-/ Laser geeignet

135g/m² Bilderdruck glänzend

170g/m² Bilderdruck matt

170g/m² Bilderdruck glänzend

250g/m² Bilderdruck matt

250g/m² Bilderdruck glänzend

300g/m² Bilderdruck matt

300g/m² Bilderdruck glänzend

Dependancy here is usually (!) on the pagenumbers (e.g. thick paper (300 g/sqr meter) cannot be used to make brochures more than 12 pages thick)

content of table:

id of product family (e.g. XYZ)

id of papertype (name then to be looked up in a PAPERTYPE_CHOICES table where id gets associated with name like "90g/m² Kopie-/ Inkjet-/ Laser geeignet" and its weight per sqr meter)

for each group chosen:

- incluence on base_price (additive)

- incluence on base_price (multiplicative)

- incluence on piece_price (additive)

- incluence on piece_price (multiplicative)

- Dependend on which table/s (*)

- dependency_specs (max number, so it might be that pagenumbers can for a brochure go up to 64, but with this paper only up to 24)

The (*) "dependend on which table/s" need to work like this:

So, say, the printer can create entries into the PAPERTYPE table for product family XYZ which go:

XYZ "90g/...Kopie"-id empty +0,00 1,0000000 +0,000000 0,9000000 PAGENUMBERS "here list of id's like "1|2" which must be sublist of choices made by printer in the PAGENUMBERS table"

XYZ '300g/...matt"-id 3:max:10|4:max:24 +0,00 1,0000000 +0,000000 3,0000000 PAGENUMBERS "here list of id's like "2|3|4" which must be sublist of choices made by printer in the PAGENUMBERS table"

Explanation:

So the printer created two different subsets here. The first says that

for his new Product-Family XYZ he wants to offer 90g paper products

The usage of that paper multiplies by a factor 0,9 the total cost for each sqr meter of area printed (we come to the formula later)

However, this option is available only when the buyer choses a pagenumber of id's 1 and 2 (ANY CHANCE WE CAN GET A MAX NUMBER INSIDE THIS ID INTO IT???)

Then the printer wants another papertype added that do factor up the sqr meter price by 3,0.

This second product-sub-set is available only on formats 2, 3 and 4

HOWEVER, here the printer says, that even though the pagenumbers id 3 allows up to 12 pages, with this papertype in the 300g choice we can do only 10 pages

and with the choice of "brochure"-id (4) this paper allows only for 24 pages, even though the brochure normally goes up to 64

Next:

COLORS

The printer can offer various print-color:

1/0

1/1

4/0

4/1

4/4

5/0

5/1

5/5

Dependency here usually (!) on the pagenumbers (1/0 means only front printer, so doesnt make sense on Brochures where a 1/1 or 4/4 would be used)

content of table:

id of product family (e.g. XYZ)

id of colorsoffer (name then to be looked up in a COLORS_CHOICES table where id gets associated with name like "1/1" or "5/0")

for each group chosen:

- incluence on base_price (additive)

- incluence on base_price (multiplicative)

- incluence on piece_price (additive)

- incluence on piece_price (multiplicative)

- Dependend on which table/s (*)

- dependency_specs (min/max of suboption of PAGENUMBERS to be applied here)

The (*) "dependend on which table/s" need to work like this:

So, say, the printer can create entries into the COLORS table for product family XYZ which go:

XYZ "1/0"-id 2:max:1 +0,00 1,0000000 +0,000000 1,0000000 PAGENUMBERS "here list of id's like "1|2" which must be sublist of choices made by printer in the PAGENUMBERS table"

XYZ "5/5"-id 2:min:2 +55,00 1,0000000 +0,000010 1,0000000 PAGENUMBERS "here list of id's like "2|3|4" which must be sublist of choices made by printer in the PAGENUMBERS table"

Explanation:

So the printer created two different subsets here. The first says that

for his new Product-Family XYZ he wants to offer 1/1 printing

The usage of that option doen't modify the prices

However, this option is available only when the buyer choses a pagenumber of id's 1 and 2

and has a pagenumber in the "2" id (Flyers) of 1

Then the printer wants another color-type added that does add 55 Euros to the setup-fee (=base-price)

and adds 0,00001 Euro to each sqare meter printed.

This second product-sub-set is available only on formats 2, 3 and 4

HOWEVER, here the printer says, that even though the pagenumbers id 2 allows either 1 or 2 pages, here it makes sense only on the 2-pages option

Next:

WORK

The printer can offer various works to be performed:

Cut

rounded Corners

Wholes

Dependency here usually (!) on the pagenumbers (e.g. you would put wholes only in the angels of posters, not brochures)

content of table:

id of product family (e.g. XYZ)

id of work (name then to be looked up in a WORKS_CHOICES table where id gets associated with name like "Rounded corners")

for each group chosen:

- incluence on base_price (additive)

- incluence on base_price (multiplicative)

- incluence on piece_price (additive)

- incluence on piece_price (multiplicative)

- Dependend on which table/s (*)

- dependency_specs

same logic as above

Next:

CELLOPHANATION

The printer can offer various cellophanations to be applied:

No Cellophan

1-seitig matt

1-setig glänzend

2 seitig matt

2-setig gtlänzend

Dependency here usually (!) on the papertype (that already by itself was dependend on pagenumbers, that already was dependend on paperformat!!!)

content of table:

id of product family (e.g. XYZ)

id of cellophanation (name then to be looked up in a CELLOPHANATION_CHOICES table where id gets associated with name like "Rounded corners")

for each group chosen:

- incluence on base_price (additive)

- incluence on base_price (multiplicative)

- incluence on piece_price (additive)

- incluence on piece_price (multiplicative)

- Dependend on which table/s (*)

- dependency_specs

same logic as above

in the default setup dependend on PAPERTYPE

Next:

PERFORIERUNG

The printer can offer various perforations to be performed:

0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 ("Perforierung")

0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 ("Nutung")

0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 ("Nutung & Perforierung")

Dependency here usually (!) on the papertype (that already by itself was dependend on pagenumbers, that already was dependend on paperformat!!!)

content of table:

id of product family (e.g. XYZ)

id of perforierung (name then to be looked up in a PERFORIERUNG_CHOICES table where id gets associated with name like "Rounded corners")

for each group chosen:

- options (available options: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 as to be specified by printer for each type Perforierung etc)

- incluence on base_price (additive)

- incluence on base_price (multiplicative)

- incluence on piece_price (additive)

- incluence on piece_price (multiplicative)

- Dependend on which table/s (*)

- dependency_specs

same logic as above

in the default setup dependend on PAPERTYPE

Next:

10 tables OPTION A, OPTION B, OPTION C and so on respectivelly

The printer can offer various options to be performed:

custom name 1

custom name 2

custom name 3

Dependency here freely definable

content of table:

id of product family (e.g. XYZ)

name of option A (names are defined by printer, no ID needed, no dependance can be defined on these custom option tables)

for each group chosen:

- dependency_specs

- incluence on base_price (additive)

- incluence on base_price (multiplicative)

- incluence on piece_price (additive)

- incluence on piece_price (multiplicative)

- Dependend on which table/s (*)

same logic as above

By aware that the printer here might make this offer depending on all of the above already mentioned tables

SO FAR THE STANDARD TABLES

Now a couple of non depending options the buyer can chose from (always availabe for the given product family):

All these options are not looked up in a XXX_CHOICES table, but can be freely customiyed by the printer

Delivery Type (e.g. Standard or Express with description)

Datacheck (user can have his print files checked with description)

sponsoring (user can accept printer logo on the final product for a discount with description)

Proof (user can have his product be sent to him before final printing for control with description)

Each of these has:

- incluence on base_price (additive)

- incluence on base_price (multiplicative)

- incluence on piece_price (additive)

- incluence on piece_price (multiplicative)

Now the next gets a bit out of the normal standard we've seen so far:

DELIVERY_TIME

"Overnight"

"Quick"

"Relaxed"

Dependency here on almost all of the above!!!

content of table:

id of product family (e.g. XYZ)

id of delivery_type (name then to be looked up in a DELIVERYTYPE_CHOICES table where id gets associated with name like "Overnight")

for each group chosen:

- standard

- max

- incluence on base_price (additive)

- incluence on base_price (multiplicative)

- incluence on piece_price (additive)

- incluence on piece_price (multiplicative)

- Dependend on which table/s (*)

- dependency_specs

This needs to be able to follow rules like:

Standard Quick is 4 days

if PAGENUMBERS = brochure then ADD 1 to STANDARD

if PAGENUMBERS = brochure and more than 12 pages then set = MAX (overrides all other)

if CELLOPHANATION != no Cellophanation then ADD 1 to STANDARD (cumulative with other "adds" if so specified)

Last a freight calculation to be set up by printer:

Countries to be shipped to

Multiplies of weight

Multiplies of Price

First Step

Base Price

The calculation then goes: Area of print materiel (found in PAPERFORMATS) times weight per sqr meter (found in PAPERTYPE) times pieces printed (to be chosen by buyer) equals total weight.

Freight Price = integer ( (Total weight – First Step) / Multiples of Weight ) * Multiples of Price + Base Price

Just in order to make sure you read the briefing, please enter the word GOTIT into the PMB with your project-bidJ

INPUTTING

After the creation of the tables you’ll need to code the html generation of the forms for the printer to input their data and the actual inputting into the tables:

1st html Page:

Asks the printer to set the general specifics of the project:

Offset or Digital Printing

Minimum Amount to be ordered

Incremental Amounts that can be ordered

2nd html Page:

Add from all formats offered in PAPERFORMATS_CHOICES the ones the printer wants (assuming he cannot add any, this will be done only by admin)

LOOP STARTS

3rd html Page

Allow the printer to decide whether PAGE_NUMBER is dependent on anything already created (so far only PAPERFORMATS).

4th html page

If so reload page with all the possible choices. (Choose PAGENUMBER categories from PAGENUMBER_CHOICES and the sublogic (“1 | 2” or “4 | 6 | 8” seee above) that are associated with them)

Should look like this (where in the columns appear only those chosen by the printer):

DIN A-8 DIN A-7 DIN A-6 DIN-Hoch

POSTER (yes no all)

1 page yes no yes no yes no yes no yes/no all

FLYER (yes no all)

1 page yes no yes no yes no yes no yes/no all

2 pages yes no yes no yes no yes no yes/no all

All yes no yes no yes no yes no

FOLDER (yes no all)

2 pages yes no yes no yes no yes no yes/no all

4 pages yes no yes no yes no yes no yes/no all

6 pages yes no yes no yes no yes no yes/no all

8 pages yes no yes no yes no yes no yes/no all

10 pages yes no yes no yes no yes no yes/no all

12 pages yes no yes no yes no yes no yes/no all

All yes no yes no yes no yes no

BROCHURE (yes no all)

4 pages yes no yes no yes no yes no yes/no all

8 pages yes no yes no yes no yes no yes/no all

12 pages yes no yes no yes no yes no yes/no all

16 pages yes no yes no yes no yes no yes/no all

20 pages yes no yes no yes no yes no yes/no all

24 pages yes no yes no yes no yes no yes/no all

XXX yes no yes no yes no yes no yes/no all

All yes no yes no yes no yes no

Where XXX is something intelligent like “keep this going as the last row given up to 120 pages)

5th page

Allow the printer to punch in prices

Should look like this (where in the columns appear only those chosen by the printer):

BasePrice BasePrice PiecePrice PiecePrice

ADD MULTIPLY ADD MULTIPLY

POSTER (yes no all)

1 page 0,00 1,000000 0,000000 1,000000

FLYER (yes no all)

1 page 0,00 1,000000 0,000000 1,000000

2 pages 0,00 1,000000 0,000000 1,000000

FOLDER (yes no all)

2 pages 0,00 1,000000 0,000000 1,000000

4 pages 0,00 1,000000 0,000000 1,000000

6 pages 0,00 1,000000 0,000000 1,000000

For all those offered and set in the page before

LOOP ENDS (Script runs through all the tables offered and the printer decides each time: Is It used / Is It dependent on something else)

In 3rd now the printer would decide whether he uses PAPERTYPE and if, whether it is dependend if so load page 4 (dependency) if not load page 5 (prices)

e.g. 4th would look like this (where in the columns appear only those chosen by the printer):

Poster Flyer Folder Brochure

90g Bilderdruck yes no yes no yes no yes no yes/no all

max

min

90g Kopie

135g Bilderdruck matt

….

….

….

This goes on for all tables.

6th html page

Then we need to define dependency for the Delivery-time

This is a huge step so be creative here. Can depend, as said above, on any (!) of the above tables)

7th html page

Last step of inputting:

Ask for any other (non dependend) options and the price modifier

Realize the freight calculator

Put all these in the database

Create a neat printout of all options chosen

The same procedure a printer must be able to go through to edit prices and dependencies.

WHOW THAT WAS TOUGH (BUT WAS IT REALLY, IT JUST REPEATS ALL THE SAME THINGS OVER AND OVER AGAIN, NO?)

Anyway, on we go:

In order now later for a user to be able to chose these things (with ok-loadtimes) I want to have:

A table where all the combinations of all the different product families are located. Well “all combinations” would add up to millions so load time crashes. What do we do? Well:

Create a table in which for the product family just created all the possible combinations of the following are located:

Offset/Digital Paperformat Pagenumbers Papertype Colors Feedback

Offset A8 Flyer 1 90 g Inkjet 1/0 default = 300

Offset A8 Flyer 2 90 g Inkjet 1/1 default = 300

Offset A8 Flyer 1 90 g Inkjet 4/0 default = 300

…..

Offset A4 Brochure 32 135g Bilderdruck 4/4 default = 300

…..

This will create about 20.000 rows in case a printer really uses all the flexibility of the system

OK that was easy,

Now last step:

I want a query mechanism the gives me two things:

With something like [url removed, login to view];PFormat=A8&Papertype_At_Least=135g&Papertype_Not_More_Than=200&Amount=2500

It should output an html with 10 rows (sorted by feedback desc)

Offset A8 Flyer 1 135g Bilderdruck matt 1/0 495 [url removed, login to view] List of av. opt

Offset A8 Flyer 2 135g Bilderdruck matt 1/1 492 [url removed, login to view] List of av. opt

Offset A8 brochure 32 200g Bilderdruck matt 4/4 435 [url removed, login to view] List of av. opt

…..

The Example Price should be calculated on the Amount given by the user.

The list of available options will be little icons (so far a dummy image 16x16 can be loaded)

Here now the long promised price formula:

(

(

Sum of all base price ADDs chosen

)

times

Multiplication of all base price MULTIPLIES chosen

)

Plus

(

(

(

Sum of all piece price ADDs chosen

)

times

Multiplication of all piece price MULTIPLIES chosen

)

Times

Amount

)

Færdigheder: Databehandling, PHP

Se mere: xyz creative group, word templates price list, whow to create logo, where can i go to create a logo, what should i ask to create a logo, what should i ask for, what is express, what is a 32 bit integer, what do i need to create a functional website, what does a flyer need, we go look, website formats templates, website custom logo creation, up work fee categories, upload image to create logo, upload image create logo, times standard, things to be included in a brochure, thing 3 logo, the creative group, the content factor, templates with icons, templates of brochures, templates for flyers and brochures, templates for brochures

Om arbejdsgiveren:
( 105 bedømmelser ) Bremen, Germany

Projekt-ID: #92263

5 freelancere byder i gennemsnit $970 for dette job

gigapromoters

We can help you..

$900 USD in 25 dage
(20 bedømmelser)
6.4
webwork4u

Hi, I can do it for you. Pls. contact me for details.

$850 USD in 25 dage
(3 bedømmelser)
4.7
demolator

Hello. I think it is very complicated for data manipulating and understanding your principles. I have university education in Compuer science and Im able to do that. You need experienced data design. Choose me. J Mere

$1200 USD in 20 dage
(4 bedømmelser)
2.8
mnouskina

I can do this for you.

$500 USD in 7 dage
(1 bedømmelse)
1.8
sharptech

We are web design ,graphic design and website development company comprises a pool of professionals who deliver quality work on a wide range of communication web site design and web application projects. The web desi Mere

$1400 USD in 25 dage
(0 bedømmelser)
3.1