
Closed
Posted
The valve (klep) seats and cylinder head of my motorcycle engine have worn past factory tolerance, so the parts need to be re-machined rather than replaced. The job centres on restoring the sealing surfaces and critical dimensions of both components to OEM spec. You will be working on the klep and the kepala silinder only, performing a full re-cut/re-grind of the valve seats, refacing the valves, and resurfacing the head deck if warpage is detected. Precision is important—I expect concentricity, seat width, and surface roughness to match standard workshop manuals. Typical equipment could include a seat-cutting machine, valve refacer, precision lathe, milling machine, or CNC machinery; feel free to use whichever setup you trust for consistent, repeatable results. I’ll ship the components cleaned and stripped of hardware, and I’m happy to supply torque and clearance specs from the engine manual. Deliverables • Re-machined valve set and cylinder head, ready to install • Measurement sheet showing seat width, valve margin, head flatness, and any other key tolerances verified after machining • Brief photo log so I can see each stage of the work I’ll cover return shipping and will release payment once the parts and measurement sheet confirm everything is back within spec. Reach out if you need additional dimensions or material details before starting.
Project ID: 40790509
13 proposals
Remote project
Active 6 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
13 freelancers are bidding on average $23 USD/hour for this job

Your motorcycle cylinder head and valve work requires precise mechanical CAD/CAM and manufacturing expertise, and my skills in SolidWorks, AutoCAD, CAD/CAM, manufacturing design, and mechanical engineering are directly relevant to producing accurate, controlled machining results. I can work from the supplied components and OEM specifications to support the required valve-seat restoration, valve refacing, and head-deck correction where necessary. My CAD and SolidWorks experience is well suited to checking critical geometry, documenting dimensions, and preparing a clear measurement sheet covering seat width, valve margin, flatness, concentricity, and other verified tolerances. I can also provide an organized photo record of the machining stages so the finished work is easy to inspect. I am committed to delivering accurately documented, installation-ready components that match the provided workshop specifications. Choose me for this precision mechanical manufacturing project and I will apply my engineering and CAD/CAM expertise carefully to the valve and cylinder-head requirements.
$15 USD in 40 days
7.4
7.4

Mechanical engineering, CAD/CAM, and manufacturing-design expertise make me well suited to precision work on your motorcycle valve and cylinder head components. My focus on accurate manufacturing-ready design and mechanical engineering aligns directly with restoring critical sealing surfaces and dimensions to OEM specifications. I can apply my SolidWorks and AutoCAD experience to support precise inspection documentation, including seat dimensions, valve margins, head flatness, and other verified tolerances. My CAD/CAM and manufacturing-design background also suits the required attention to concentricity, surface condition, and repeatable machining quality, while a clear photo log can document the finished components and measurement results. I am ready to contribute careful engineering judgment and accurate documentation to this valve-seat and cylinder-head re-machining project. Choose me to handle the technical side with the precision your engine parts require.
$15 USD in 2 days
7.0
7.0

Hi, I’m a Mechanical Engineer with experience in mechanical design, precision engineering, and manufacturing processes. I understand that restoring motorcycle valve seats and cylinder-head surfaces requires accurate measurement and strict adherence to the engine manufacturer’s specifications. My approach would be to inspect and measure the valve seats, valves, and cylinder-head deck first, then establish whether re-cutting, valve refacing, or resurfacing is appropriate based on the measured condition and OEM limits. My proposed workflow includes: - Initial inspection and measurement of valve condition, seat geometry, and cylinder-head flatness. - Assessment of seat concentricity, seat width, valve margin, and sealing surfaces against the engine manual. - Machining requirements and tolerances documented for the re-cutting, grinding, and resurfacing operations. - A final measurement sheet and photo log documenting the work and inspection results. One important point: this job requires access to suitable valve-seat machining and valve-refacing equipment, along with the ability to physically machine and inspect the components. I can support the engineering assessment and measurement documentation, but I would need to confirm workshop capability before committing to the physical machining and delivery. Best regards,
$25 USD in 45 days
6.7
6.7

I understand you need precise re-machining of your motorcycle's valve seats and cylinder head, similar to the critical tolerances required for aircraft engine components. My experience with high-precision machining of intricate metal parts ensures I can restore your components to OEM specifications. My approach involves using a CNC valve seat grinder for accurate seat angle and depth profiling, followed by a dedicated valve refacing machine to ensure perfect valve face concentricity and angle. I will meticulously measure and verify critical dimensions, including seat width and parallelism, using digital calipers and bore gauges. Surface roughness will be checked against industry standards to guarantee optimal sealing. If warpage is detected on the head deck, I will utilize a precision milling machine to achieve a flat, true surface within tight tolerances. What is the specific make and model of the motorcycle? Do you have the OEM service manual available for reference regarding specific tolerances and surface finish requirements? I'm available for a brief call to discuss your project in more detail and confirm my suitability.
$25 USD in 7 days
5.6
5.6

Hello, At Vutuk Design and Media, our mechanical engineering and engine development team specializes in automotive component design, precision CNC machining preparation, and advanced CAD/CAM workflows. Backed by 15 years of industry experience across SolidWorks, we engineer high-performance engine parts complete with optimized flow ports, valve train clearances, and structural mounting interfaces. Before we establish the primary 3D CAD architecture and port geometry for your motorcycle valve head, please consider: Are there specific compression ratio targets, valve size limits, or spark plug location constraints that must be adhered to? Will you require CFD intake/exhaust flow simulation or thermal FEA stress testing to validate combustion chamber performance and heat dissipation? Would you benefit from photorealistic 3D product renders or physical 3D-printed prototype samples to verify spatial fitment on the engine block? What neutral CAD exchange formats (e.g., STEP, IGES, Parasolid) and CAM toolpath requirements are needed for your CNC machinist? Beyond precision CAD modeling, we offer CFD fluid simulation, rapid prototyping, and high-resolution visual presentation services. We invite you to visit our profile and portfolio to inspect our previous engineering design and automotive work. Let's make your project a success. Best regards, Vutuk Design and Media
$20 USD in 40 days
5.5
5.5

Hi, I'm a Chinese professional, and I'd be glad to take on this engine job. **Before machining anything, I'd like to propose a more cost-effective approach:** China has a huge number of motorcycles of all brands, and OEM-standard parts are widely available here. Please send me: - photos of the valve (klep) seats and cylinder head (kepala silinder), - the part numbers / technical specifications, - and the engine model details, so I can first check whether identical replacement parts can be purchased directly — this would avoid the cost of re-machining or redesigning anything. **If identical parts are not available to buy:** I can arrange a CNC workshop to machine brand-new parts to the same specifications. China has plenty of professional CNC machining shops, so we can produce new valve seats and cylinder head components to OEM tolerances with consistent, repeatable results. **If you prefer to keep re-machining the original parts:** I can also arrange the full re-cut/re-grind of the valve seats, valve refacing, and head deck resurfacing, with a measurement sheet and photo log at each stage — same deliverables you listed. Please share the parts info and any torque/clearance specs from the manual, and I'll come back with the best option and a quote.
$20 USD in 40 days
3.8
3.8

Hi, I can help restore the valve seats, reface the valves, and resurface the cylinder head where needed, using OEM specifications as the reference. I’ll focus on accurate measurements, seat concentricity, seat width, valve margin, and head flatness, with a measurement sheet and photo log documenting the work. Please share the motorcycle make, model, engine details, and workshop manual specifications so I can review the requirements. Thanks, Deepak
$20 USD in 40 days
0.3
0.3

Hello, My mechanical engineering and CAD/CAM background is directly relevant to restoring worn motorcycle components to precise, documented dimensions. I specialise in mechanical part development, reverse engineering from measurements, tolerances, clearances, and manufacturing-ready documentation, important foundations for valve seats, valve faces, and cylinder-head sealing surfaces. Using SolidWorks and AutoCAD, I can accurately assess and document the valve and head geometry, prepare clear engineering drawings, and provide a professional measurement sheet covering the verified critical dimensions. My understanding of fabrication processes and precision mechanical components also supports careful inspection of concentricity, seat geometry, flatness, and other OEM requirements rather than relying on visual results alone. I would be pleased to apply my mechanical design and CAD/CAM expertise to this valve and cylinder-head restoration, including clear technical documentation and a photo record of the completed work. Choose me to help return these components to a precise, installation-ready condition. Thanks!
$50 USD in 21 days
0.0
0.0

My mechanical engineering, CAD/CAM, SolidWorks, and manufacturing design background makes me well suited to precision-focused work involving critical dimensions and mating surfaces. Although my broader professional experience is in architectural and construction coordination, I bring a practical understanding of buildable details, accurate documentation, and dimensional control. I can support this project through careful technical review and organized documentation of the valve and cylinder-head machining requirements. My AutoCAD and SolidWorks skills are useful for recording dimensions, comparing geometry against OEM specifications, and preparing a clear measurement sheet covering seat width, valve margin, flatness, and other verified tolerances. I can also maintain the requested photo log in a structured, easy-to-review format. I would welcome the opportunity to apply my mechanical design and manufacturing-focused skills to help document and coordinate this valve-head restoration accurately.
$20 USD in 40 days
0.0
0.0

Depok, Indonesia
Member since Oct 28, 2026
$100-10000 USD
$250-750 USD
€12-18 EUR / hour
$250-750 USD
$30-250 USD
$15-25 USD / hour
$1500-3000 USD
€8-30 EUR
$250-750 USD
₹750-1250 INR / hour
₹600-1100 INR
$20000-50000 USD
$20000-50000 USD
₹12500-37500 INR
$40-80 USD
$375-750 USD
€30-250 EUR
₹600-1500 INR
$2-8 USD / hour
$30-250 USD