Find Jobs
Hire Freelancers

Matlab Project SIMULINK

$30-250 USD

Lukket
Slået op over 5 år siden

$30-250 USD

Betales ved levering
Design a Simulink model of the circuit in the single line diagram. The aim is to analyze the effects of integration of a wind power plant into an existing power system. The network/circuit to be considered will have 2 ideal generating stations which are providing power to the grid at constant voltage and frequency level. These sources dispatch 400KV and are connected to each other by a 70km line. The DFIG (doubly fed induction generator) type wind generator of 310MW consists of 365 turbines each 850KW with a rated output voltage of 690V. The wind generating station supplies a resistive load of 500KW. Other rating of the turbines is shown below in the datasheet provided. A fault will be introduced along line 1 to show how the grid response to it (stability of the grid). The network is at 50Hz. Let the base power be 100MW
Projekt-ID: 17559917

Om projektet

21 forslag
Projekt på afstand
Aktiv 6 år siden

Leder du efter muligheder for at tjene penge?

Fordele ved budafgivning på Freelancer

Fastsæt dit budget og din tidsramme
Bliv betalt for dit arbejde
Oprids dit forslag
Det er gratis at skrive sig op og byde på jobs
21 freelancers are bidding on average $183 USD for this job
Brug Avatar.
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in SMPS, supplies design from few watts to KW range using Buck, Boost, Buck -boost, Push Pull and H-bridge inverters I am excellent in solar, wind, Micro grid, smart grid and IEEE bus systems development in MATLAB Simulink Design, PSPICE, PSIM ,MULTISIM and LTSpice , Proteus Simulations. I did many projects for MS and PhD thesis like grid connected solar, wind, wave energy grid connected systems using MPPT, Multi-level converters, Inverters with different control algorithms, hybrid systems development and D-STATCOMs, FACTS devices for power stability, quality and control electrical vehicles, inductor motors. I worked for vehicle design simulation for different applications. I use to design Solar with MPPT using buck, buck-boost topologies, Power quality and control using Active filters, Opamp based circuit, digital circuits etc. I understand your requirement and ready to work for you. Please contact me for further discussion
$555 USD på 14 dage
4,9 (63 anmeldelser)
6,9
6,9
Brug Avatar.
Hello I'm Mohamed saeed .Matlab expert both codes and Simulink .I have checked your job description and ready to help u .
$155 USD på 3 dage
4,6 (70 anmeldelser)
6,7
6,7
Brug Avatar.
Hello Sir, I am the expert freelancer here. I am on the 6th position through out the world to deliver the quality job. I have deliver here more than 385 + projects with 100% client satisfaction. I have more than 5 years of the experience in Electrical Engineering, Electronics, Engineering, Matlab and Mathematica, Mechanical Engineering Please check the profile reviews. I can deliver your job with in your deadline. Please ping me for more discussion. Thanks.
$250 USD på 3 dage
5,0 (31 anmeldelser)
5,5
5,5
Brug Avatar.
Hi, I have good experience in windpower generation with DFIG and renewable energy in general. I have in depth knowledge right from pitch control of rotors to the power electronic stages and integration with grid with Droop Control systems and secondary control. I have perfromed fault analysis studies in Simulink and I can provide you a GUI in MATLAB for your Simulink model where you can specify the location, and the type of fault and the fault resistances. Looking forward to discussing with you on chat. With Regards, Anthony
$180 USD på 5 dage
5,0 (14 anmeldelser)
4,8
4,8
Brug Avatar.
Expert in Matlab, Simulink, Power System, Signal Processing, Image Processing Artificial Intelligence. Excellent in Electrical Engg. Power system, power electronics & drives
$155 USD på 3 dage
4,9 (23 anmeldelser)
4,7
4,7
Brug Avatar.
Hi I can help you in this. kindly see my profile for my past projects. Thanks for considering my bid.
$222 USD på 7 dage
4,9 (16 anmeldelser)
4,9
4,9
Brug Avatar.
Hello sir. I am an electrical engineer having specialization in power sector and having expertise in power generation techniques. I also have full grip over research software simulink and provide the solution for complex engineering problem. Waiting for your response. Thanks.
$120 USD på 3 dage
4,8 (29 anmeldelser)
4,5
4,5
Brug Avatar.
Hi. I am expert in matlab. can do your task to design a SIMULINK model of the circuit in the single line diagram with given requiements.
$111 USD på 3 dage
4,9 (13 anmeldelser)
4,6
4,6
Brug Avatar.
Master in Engineering, Electrical and Electronic Engineer, who is dynamic, reliable, resourceful, committed and organized with enthusiastic approach to succeed with a pleasant attitude. Possessing excellent analytical skill and good research background. I have successfully completed IELTS with an overall band of 7 and have a good proficiency in English COMPLETED PROJECTS • FM radio. • VHDL Design of an Up/Down Counter. • Design of Up/Down Counter using PIC. • Duck Shooter Program using C. • Pointer movement controller on 2-dimentional axis using C. • LCD display Manipulation projects including: o Text Display o Volt-Meter • Analog to Digital Conversion (8-bit). • Sound to Light Color Organ Design and Development. • Minesweeper Player Creation using PIC. • Simulation of an End to End Communication System with MATLAB. • (BENG Individual Project) (MENG Part A). • (MENG Individual Project) (MENG Part B). • (MENG Group Project).
$30 USD på 3 dage
4,7 (13 anmeldelser)
4,5
4,5
Brug Avatar.
good evining sir, i can do what you want as i'm electrical engineer and expert in simulink and matlab. my graduation project was in doubly fed induction generator control and fuzzy control of wind turbines
$111 USD på 3 dage
4,9 (31 anmeldelser)
4,3
4,3
Brug Avatar.
Hi there , we are group of electrical and mechanical engineering with great knowledge pool in power system development system. we are conversant with wind generation and problem associated with grid interfacing among other associated conditions we will do you a formidable task as pertains to analysis ,design and simulink simulation as per your needs. thanks you
$166 USD på 10 dage
4,7 (9 anmeldelser)
4,5
4,5
Brug Avatar.
We are a team of data scientists and engineers experienced with modelling with Simulink. We have worked on several Simulink projects such as electrical diwheel modeling, vehicle stability control and renewable energy system. You can find some examples on my portfolio. Best Regards, Koray
$200 USD på 7 dage
4,8 (15 anmeldelser)
4,4
4,4
Brug Avatar.
Hi, I am kahan. I am master in power system. I can make this as per your need and give it in time. Waiting for further discussion. Thank you .
$166 USD på 7 dage
5,0 (9 anmeldelser)
3,5
3,5
Brug Avatar.
Industrial engineer and project engineering Phd. More than 8 years experiences with MATLAB/ANSYS/SIMULINK/R/SPSS/EXCEL/SOLIDWORKS....I can solve all your problem in the field of : mathematics, electrical engineering, mechanical engineering,control and automation, data analysis, strengh of materials, physics, fluid mechanical, computational fluid dynamics, system modeling, heat transfert, hydraulics, statistics, linear programming,finite element analysis. free to colaborate with you (long term) please see my portfolio Best regards
$250 USD på 1 dag
4,7 (9 anmeldelser)
3,2
3,2
Brug Avatar.
Hello. I am interesting in your project since I have experience in your fields. I hope to work with you. Thanks.
$150 USD på 3 dage
5,0 (4 anmeldelser)
3,1
3,1
Brug Avatar.
Dear Hiring Manager, I have worked with various Electrical & Electronic support companies as an Engineer which develop my skills in awarding with excellent, effective & efficient results as per my jobs responsibility. I am in search of new and challenging responsibilities in order to keep on my career path and desire to set up an excellent working relationship to all of the employers. I am full time freelancer of Electrical & Electronic Circuit Designing & Simulation, PCB Designing, Consultancy of different types of Electrical & Electronic Problem. I am ready to give hardworking, reliability, flexibility & honesty. I can work with minimal supervision, communicate & give updates on the status of my work output. I am always determined to deliver projects to freelancer clients before meeting the dead line with 100% satisfaction & loyalty. Technical Skills Multisim Eagle MATLAB & so on Thanks & Regards
$88 USD på 3 dage
5,0 (4 anmeldelser)
2,8
2,8
Brug Avatar.
Hey, I'm interested in your project. Please send me a message so that we can discuss more.
$150 USD på 2 dage
5,0 (2 anmeldelser)
1,7
1,7
Brug Avatar.
hello employer like to meet you i have seen your post i think i can do it; if you want plz contact me thanks
$155 USD på 3 dage
1,7 (4 anmeldelser)
3,9
3,9
Brug Avatar.
Hello, i am currently studying in warsaw university of technology and i think i am capable of such simulink tasks after studying it for more than a year. Also this would be helpful as college project. Relevant Skills and Experience I am capable of doing simulink, plecs, matlab, LabVIEW and all the cad/cam designing softwares.
$155 USD på 3 dage
0,0 (0 anmeldelser)
0,0
0,0

Om klienten

Flag for KENYA
NAIROBI, Kenya
5,0
1
Betalingsmetode verificeret
Medlem siden feb. 9, 2013

Klientverificering

Tak! Vi har sendt dig en e-mail med et link, så du kan modtage din kredit.
Noget gik galt, da vi forsøgte at sende din mail. Prøv venligst igen.
Registrerede brugere Oprettede jobs i alt
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Indlæser forhåndsvisning
Geolokalisering er tilladt.
Din session er udløbet, og du er blevet logget ud. Log venligst ind igen.