
Closed
Posted
Paid on delivery
I need a hardware designer to shrink a full-featured wireless gaming mouse down to the smallest possible printed-circuit footprint. The heart of the board will be the Pixart 3395 optical sensor paired with Nordic’s nRF52840 for low-latency, 2.4 GHz wireless performance. Alongside the core components the PCB must natively support RGB lighting channels, several programmable button inputs, and on-the-fly adjustable DPI. The mouse will run from a rechargeable Li-ion/Li-Po cell, so please allow for an on-board charger and battery protection. My priority is size: component placement, antenna tuning, and power management all have to be optimized so the final outline fits comfortably inside a modern, lightweight gaming shell. If you can achieve a single-board solution without mezzanine layers, even better. Deliverables • Complete schematic with all part numbers • Compact, production-ready PCB layout (KiCad or Altium preferred) • BOM with sourcing suggestions for every component • Gerber, drill and pick-and-place files • Basic firmware stub proving sensor readout, button mapping and 2.4 GHz link I will test the first prototypes for latency, sensor accuracy, RGB control, power draw and wireless stability; passing those checks releases final approval. If you have prior experience squeezing Nordic radios and Pixart sensors into tight spaces, I’m eager to see what you can do.
Project ID: 40777204
45 proposals
Remote project
Active 3 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
45 freelancers are bidding on average $192 USD for this job

Hi, I have designed a gaming mouse for my customer. https://www.freelancer.com/u/AlexandrGergel Please check out my profile. I am proficient in Altium Designer and all hardware concepts. Let's talk more in details. I can give you more precise esitmation once the schematic review is done. Best, Oleksandr
$500 USD in 7 days
8.4
8.4

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience with compact wireless hardware, low-power firmware and rechargeable consumer products, from concept through production. I can develop your nRF52840 and Pixart 3395 design around the shell dimensions and sensor optics, aiming for a single compact board. My approach would prioritize antenna clearance, accurate sensor placement and efficient power management while accommodating RGB, programmable buttons, DPI adjustment, charging and battery protection. I will provide the complete schematic, KiCad layout, BOM with sourcing suggestions, and Gerber, drill and pick-and-place files. I will also develop the firmware stub demonstrating sensor readout, button mapping and the 2.4 GHz link, and support your initial prototype checks for latency, power consumption and wireless stability. Do you have shell CAD, target board dimensions and the sensor/lens documentation? Will the wireless link use an existing receiver, or does a receiver also need development? My $450 bid reflects the combined PCB design and firmware scope. I am flexible once the mechanical constraints and receiver requirements are confirmed. Please contact me to discuss details.
$450 USD in 14 days
7.7
7.7

With Multifaceted expertise in Circuit Design, Electrical Engineering, Electronics, Embedded Systems, and PCB Layout, I am ideally skilled to accomplish your demanding project. Having delicately manoeuvred numerous high-powered components into restricted spaces before, I can confidently meet your requirements of optimizing component placement, antenna tuning, and power management to ensure a compact yet fully-featured gaming mouse. In addition to my skill-set, my proficiency working with the Pixart 3395 optical sensor as well as Nordic’s nRF52840 for low-latency, 2.4 GHz wireless channels will be a significant advantage throughout your project. Furthermore, my deep familiarity with KiCad or Altium will ensure seamless delivery of a compact, production-ready PCB layout which supports RGB lighting channels, programmable button inputs, adjustable DPI and on-the-fly operation. Cultivating both efficiency and quality have always been my priorities. Considering this project revolves around fitting sophisticated technology into the smallest possible footprint without sacrificing functionality or performance; my experience in Digital Motor Control and Analog Design has armed me with unique aptitude for problem-solving at the intersection of power management and space optimization. Your ambitious project requires an experienced hand who understands not only how individual components work but how they harmonize within a holistic design; and I can ensure just that!
$100 USD in 7 days
7.5
7.5

As an electrical engineer with extensive experience in PCB design and prototyping, I am confident that I have the skills and expertise necessary to tackle your project. My background includes proficiency with KiCad and Altium, precisely the tools you prefer for the job. Throughout my career, I've honed my abilities in antenna design, circuit design, and power management - all essential factors in optimizing both space utilization and wireless stability. What sets me apart from other freelancers is not only my proficiency in designing compact boards but also my dedication to providing complete solutions. Alongside the PCB layout and schematic, my delivery includes sourcing suggestions for each component along with bom files to address your specific requirement of a single-board solution. My passion for PCB design and embedded systems has allowed me to master the art of maximizing functionality while minimizing footprint. This is evident in my prowess in designing tight spaces particularly with Nordic radios and Pixart sensors. I would love to bring this experience together with your vision of a tiny nRF52840 and Pixart 3395 Gaming Mouse PCB. Let's create something outstanding.
$250 USD in 7 days
7.0
7.0

Hello, I can help design a compact wireless gaming mouse PCB using the PixArt PAW3395 sensor and Nordic nRF52840, with a strong focus on minimizing board size and maintaining reliable RF performance. I will develop the schematic, optimize component placement and antenna clearance, and integrate button inputs, RGB lighting, DPI controls, and Li-ion/Li-Po charging and protection. Deliverables will include KiCad or Altium source files, a sourcing-ready BOM, Gerber/drill files, pick-and-place data, and a basic firmware stub for sensor readout, button mapping, and wireless communication. I will also consider power consumption, signal integrity, manufacturability, and mechanical constraints to support your prototype testing. Please share the mouse shell dimensions, sensor lens requirements, battery size, and preferred wireless protocol so I can finalize the architecture. Regards, Engr Muhammad Usman
$140 USD in 2 days
6.9
6.9

Hi there I'm an Electronic Engineer with over 10 years experience designing embedded applications and their PCBs, you can learn more about me from my Freelancer Profile. How about a private message so we discuss the details of your mouse Kind regards V.T.
$200 USD in 3 days
6.8
6.8

As an AI-focused freelancer, I understand the value of efficient and optimized systems. With my rich background in circuit design, electrical engineering, and deep knowledge of Nordic and Pixart platforms, I am uniquely equipped to take on your project and deliver the PCB that you need for your miniature gaming mouse. I approach my projects with a big-picture perspective, honing in on priority areas such as size optimization, component placement, antenna tuning, and power management. Your call for a single-board solution also resonates with me as I'm eager to push the envelope in maximizing device performance without sacrificing quality. In addition to these hardware skills, my competency in KiCad or Altium makes me an excellent fit for producing a compact, production-ready PCB layout for your gaming mouse.
$140 USD in 7 days
5.1
5.1

Hi, Greetings! I am interested in working on your project. Could you please share the design details and technical requirements so we can discuss the project scope and key parameters in detail? I look forward to working with you. Thank you! Shivkant
$240 USD in 7 days
4.7
4.7

I understand your need for an ultra-compact PCB for your gaming mouse, similar to the density challenges I've tackled with miniaturized IoT devices where every millimeter counts. My experience designing for tight spatial constraints and optimizing signal integrity for high-frequency components will be directly applicable here. My approach will involve a meticulous component selection process, prioritizing smallest form factors (e.g., 01005 passives where feasible) and advanced PCB stacking techniques ( HDI, buried/blind vias). I'll leverage Altium Designer for schematic capture and PCB layout, focusing on optimized routing for the nRF52840 and Pixart 3395 to minimize trace lengths and ensure signal integrity for 2.4 GHz. Antenna placement will be critical, and I'll perform EM simulation to validate performance before fabrication. Power management will utilize a dedicated IC for efficient Li-ion charging and protection. Given the critical importance of antenna performance in such a small form factor, have you already conducted any preliminary antenna simulations or have a preferred antenna type in mind? I'm also curious about your target battery capacity and desired operational lifespan, as this will influence the power management strategy. I'm available to discuss these details further at your convenience.
$250 USD in 21 days
4.3
4.3

I m a 20+ years experience electronic engineer, mainly work in embedded firmware development, circuit design in schematic, PCB layout I m familiar developer in Nordic MCU, nRF52, nRF53 series are popular use in BLE related applications, nRF91 series in IoT, GNSS related applications, all I have experience and can provide example if needed I have many projects experience in nRF52 series with BLE / 2.4G wireless communication, beacon.....etc, RGB LED driving, power control or customer design product. my work base in Hong Kong and smooth communicate in English and Chinese, experience to sourcing and working with China partner Please send me a message so we can discuss the project and start immediately
$400 USD in 7 days
4.2
4.2

Hi, I’m an electronics engineer with 8 years of hands-on experience in embedded systems, PCB design, and firmware development, including Nordic nRF microcontrollers. I can design your ultra-compact nRF52840 + PixArt PAW3395 gaming mouse PCB, focusing on minimal size, reliable 2.4 GHz wireless performance, efficient power management, RGB control, and Li-Po charging. I also have a fully equipped prototyping workshop with CNC, fiber laser, and 3D printing capabilities, allowing me to support hardware development and testing. I can provide complete schematics, PCB layouts, manufacturing files, BOM, and firmware. I’d be happy to discuss your requirements and get started!
$250 USD in 5 days
4.2
4.2

Hi, I can help design a compact wireless gaming mouse PCB using the nRF52840 and PixArt PMW3395, with a strong focus on board size, power efficiency, and reliable 2.4 GHz performance. I have hands-on experience with KiCad PCB design and understand the importance of component placement, signal integrity, grounding, and manufacturability. My approach will be to review your mechanical constraints and component requirements, develop the schematic, then optimize the layout around the optical sensor, RF antenna, battery circuit, and button connections. The design will cover: - nRF52840 and PMW3395 integration - Compact PCB layout in KiCad - 2.4 GHz RF routing and antenna considerations - Li-ion/Li-Po charging and protection - RGB lighting and programmable buttons - Adjustable DPI controls - Power management and noise reduction - Complete schematic and BOM - Gerber, drill, and pick-and-place files - Basic firmware stub for sensor, buttons, and RF communication - ERC/DRC and manufacturing checks I'll prioritize a practical single-board solution, with prototype measurements used to verify RF performance, latency, and power consumption. My proposed budget is $250, with an estimated initial delivery of 14–21 days. Could you share the target PCB dimensions, mouse shell design, and available PMW3395 documentation? Best regards, Ankit
$250 USD in 14 days
4.2
4.2

Hi, I’m an electronics and PCB design engineer experienced in compact PCB design, Nordic-based wireless hardware, sensor interfaces, and low-power embedded systems. I can help develop a compact, single-board gaming mouse design using the PixArt PAW3395 sensor and nRF52840, integrating RGB lighting, programmable buttons, DPI control, Li-ion/Li-Po charging, and battery protection. My approach is to optimize component placement, power distribution, grounding, and the 2.4 GHz antenna layout while respecting the optical sensor’s mechanical and optical requirements. I can provide the complete schematic, PCB layout, BOM, manufacturing files, and a basic firmware stub for sensor communication, button handling, and wireless connectivity. I would first review the mouse shell dimensions, sensor placement requirements, battery size, and wireless protocol to establish a realistic PCB outline and implementation plan. I focus on practical, manufacturable designs and can work in KiCad or Altium. I’m ready to review your requirements and existing mechanical references to define the hardware architecture.
$140 USD in 7 days
3.8
3.8

We at HardFault are excited about the challenge of designing a compact PCB for your wireless gaming mouse using the Pixart 3395 sensor and the nRF52840. Our experience with embedded hardware design and expertise in low-latency wireless solutions make us a strong fit for the precision and minimal footprint required by your project. HardFault has a track record of effectively marrying sensor interfacing and power management within tight spaces, optimized for efficient IoT devices. Working as a team, we offer you the advantage of diverse skills from hardware design to firmware development, ensuring faster turnaround and redundancy. Our approach will focus on optimizing component placement and antenna tuning right from the schematic to PCB layout phase, ensuring your mouse’s performance matches its design aspirations. Could you share more about any specific constraints or preferences for the onboard RGB lighting channels? Looking forward to your thoughts!
$205 USD in 21 days
3.4
3.4

Hi, Integrating the PixArt PMW3395 and nRF52840 into a single compact board is exactly the kind of work I do. I have hands-on experience delivering production-ready wireless hardware — antenna impedance matching, SPI timing optimization, and power isolation included. My approach for this project: RF/Antenna — 2.4 GHz PCB or chip antenna tuned for minimum footprint without sacrificing link performance. Power — Single-stage Li-ion charger + protection (TI/MPS family) to keep the battery circuit tight. RGB — nRF52840 PWM direct-drive or a lightweight LED driver, whichever saves more board space. Size-first layout — 0402/0201 passives, QFN packages throughout; single-board, no mezzanine. Deliverables I’ll provide: Full KiCad schematic with BOM · Compact production-ready PCB layout · Sourced BOM · Gerber, drill & pick-and-place files · Firmware stub (sensor readout, button mapping, 2.4 GHz link verification) Before I start, I’ll align with you on the exact pass/fail criteria for latency, sensor accuracy, RGB, power draw, and wireless stability — so the first prototypes hit your targets cleanly. Feel free to message me to discuss portfolio samples, timeline, and budget. XinTian
$30 USD in 7 days
3.4
3.4

Greetings Dear Hiring Manager I can design a compact wireless gaming mouse PCB integrating the PAW3395 sensor and nRF52840 1. What are the maximum PCB dimensions? 2. Do you have the mouse shell CAD files? 3. Is a USB-C charging port required? 4. Which RGB zones and buttons are needed? 5. Is 2.4 GHz dongle firmware also required? I am waiting in chat to discuss your project in more detail Best Regards Dr Kainat
$34 USD in 3 days
3.5
3.5

Hi, For a mouse this small I would put the nRF52840 on a pre-certified module with the antenna built in, rather than chip-down with a tuned matching network. It costs a few millimetres, but you skip the RF tuning and a new FCC/CE radio certification, which would cost more than this whole design. I write nRF52 firmware in C and design my boards in KiCad. My latest board, a battery-powered audio device now going to PCBA at JLCPCB, went through my schematic review with 26 findings, among them a battery input with no reverse-polarity protection. An anonymized sample of that report is in my portfolio. You get the schematic with part numbers, a compact layout with the Li-Po charger and protection, RGB, buttons and DPI switching, the BOM with sources, Gerber, drill and pick-and-place files, and the firmware stub showing sensor readout, button mapping and the 2.4 GHz link. Will the 2.4 GHz link go to a USB dongle you already have, or should the dongle side be part of this job? Best regards
$250 USD in 14 days
3.3
3.3

Hi, I can help you develop a compact, production-ready PCB for your wireless gaming mouse, focusing on component miniaturization, efficient power management, and reliable 2.4 GHz wireless performance. My approach would be to prioritize a single-board architecture integrating the PixArt PAW3395 sensor, Nordic nRF52840, RGB lighting, programmable buttons, DPI control, and Li-ion/Li-Po charging and protection. I would carefully optimize component placement, routing, grounding, and antenna clearance to minimize the PCB footprint without compromising signal integrity or wireless stability. Deliverables would include the complete schematic with component part numbers, optimized PCB layout in KiCad, BOM with sourcing options, manufacturing files, and a basic firmware stub for sensor readout, button mapping, and wireless communication. I would also review the design against your prototype validation criteria, including latency, sensor performance, power consumption, RGB control, and RF stability. My priority is to deliver a compact, manufacturable design that meets your functional requirements while keeping the architecture as simple and space-efficient as possible. I’m ready to review your target PCB dimensions, mouse shell constraints, and any existing reference designs to establish the best implementation. Best regards
$140 USD in 7 days
1.7
1.7

Hi, I can help you design a compact, reliable PCB for your wireless gaming mouse, with a strong focus on minimum size and clean component placement. I can work on the schematic and PCB layout around the PixArt PAW3395 sensor and Nordic nRF52840, including buttons, RGB lighting, DPI control, and battery charging and protection. I’ll pay close attention to power efficiency, RF layout, antenna clearance, and signal integrity to help achieve stable 2.4 GHz performance in a lightweight mouse shell. I can also prepare the BOM, manufacturing files, and organized KiCad project for production. For firmware, I can help with the basic integration and testing setup for sensor readout, button inputs, and wireless communication. My goal is to deliver a practical, compact design that is easy to prototype, test, and refine. I’d be happy to discuss your target PCB dimensions and mouse shell so we can plan the layout around the available space. Best regards, Engr. Muhammad Uzair
$75 USD in 4 days
1.0
1.0

Hi there, The main challenge is compressing the Pixart 3395, nRF52840 wireless stack, antenna, RGB channels, controls, and protected Li-ion power system into one reliable mouse PCB without sacrificing RF stability, sensor accuracy, or battery life. I have strong hands-on experience with Electronics and Electrical Engineering and have solved similar problems involving compact PCB layout, embedded wireless hardware, power management, and production documentation. My approach would be to: * Review the enclosure constraints, sensor geometry, battery specification, wireless requirements, and current implementation. * Identify the root cause of any size, RF, thermal, or power limitations and determine what can be reused versus what needs to be changed. * Implement a clean, maintainable solution using KiCad or Altium, with complete schematics, BOM, compact placement, antenna matching provisions, Gerbers, drill, and pick-and-place outputs. * Test edge cases, reliability, performance, security, and integration behavior, including sensor readout, button mapping, RGB control, charging, battery protection, and 2.4 GHz link behavior. * Deploy or integrate the fix without disrupting the existing system, including a basic firmware stub for prototype validation. For the nRF52840 antenna, clearance, ground strategy, matching network, and sensor optical keepouts must be treated as layout-critical constraints rather than optimized after routing. I prefer fixing the actual root cause rathe
$600 USD in 14 days
0.0
0.0

Racine, United States
Member since Oct 20, 2026
$250-750 USD
$20-500 USD
$750-1500 CAD
$30-250 USD
$10-30 USD
₹12500-37500 INR
₹37500-75000 INR
₹100-400 INR / hour
$3000-5000 USD
$750-1500 USD
$250-750 USD
$5000-10000 USD
$15-25 USD / hour
£250-750 GBP
$30-250 NZD
$750-1500 USD
$30-250 AUD
$3000-5000 USD
$10-30 AUD
$50-100 USD