Relay Removal PCB Redesign

@hamzazayyad

Hello, I have carefully reviewed your project requirements and can complete this PCB modification in Altium Designer. With over 15 years of experience in PCB design, embedded hardware, and industrial electronics, I have performed many schematic revisions and PCB re-spins where electromechanical components were removed while preserving the original circuit functionality. For this project, I will: • Analyze the schematic and PCB to understand the function of relays IC13 and IC14. • Determine the correct permanent signal routing without introducing incorrect net connections. • Update the schematic and PCB layout, removing redundant relay driver circuitry where appropriate. • Perform full ERC/DRC verification to ensure the design remains electrically correct. • Generate updated Gerber, BOM, Pick-and-Place, and manufacturing files. • Provide a detailed engineering report explaining every modification and its electrical impact. I will preserve the existing design wherever possible and only modify the circuitry required for the relay removal. If I identify any worthwhile improvements during the review, I will discuss them with you before making changes. I look forward to reviewing the Altium project files and working with you. Best regards, Hamza Electronics Engineer

@abdurRafiqM

HI, I am an experienced electronics and PCB Design engineer, specialised in use of ECAD software such as Altium Designer, KICAD, EasyEDA, etc. for the the design of electronics and PCB. I will design your projects to meet your Requirements and the industry standard. I do all kinds of circuits such as Power delivery circuit, Sensor Integrated Circuits, wireless control, MCUs etc. I will deliver the following. The Schematics for your Design The PCB for the design Bill of materials(If needed) Gerber, Pick and Place and other manufacturing and assembly drawings needed. Full Support and consultancy till the project is done. Kindly send me message for my previous designs and also so we can discuss further on your project I look Forward to working with you. Best Regards, Abdur-Rafiq

@danish2051

I am an Embedded Systems and PCB Design Engineer with experience in Altium Designer and custom hardware development. I can design your PCB from schematic to production-ready files, including: • Schematic Design • PCB Layout • Component Selection • Design Rule Check (DRC) • Gerber Generation • BOM Preparation • Manufacturing Support (JLCPCB, PCBWay, etc.) I have experience with ESP32, STM32, sensor interfaces, power supplies, RF modules, Ethernet, and industrial electronics. Please share the project requirements, schematic (if available), board dimensions, and any special requirements. I can start immediately. Looking forward to working with you. Best Regards

@FranciscoSilvi

Hi There! As you can see in my portfolio on my profile, I have extensive experience designing PCBs and mass production equipment, just like you need. I can handle your project. I apologize for the simple proposal; I know you're probably tired of reading AI-generated proposals, and I'd rather not waste time on that. If you're interested in working with me, send me a message and we can work out the details! Best Regards!

@alluankit01

Hi, I can update your Altium PCB project by removing relay IC13 and IC14, converting their switching paths into correct permanent connections, and regenerating the complete manufacturing package. The best solution is to first review the existing schematic, relay pin functions, connected nets, driver circuitry, PCB routing, and BOM impact. Then I’ll determine the correct fixed net-to-net connections, remove the relays and any redundant components where appropriate, update the schematic and layout, add direct routing or 0Ω links if needed, and run ERC/DRC checks before generating fresh fabrication outputs. I’m comfortable with Altium Designer, embedded controller PCB edits, relay signal-path analysis, schematic updates, layout rework, BOM cleanup, Gerber generation, Pick-and-Place files, DRC/ERC validation, and technical change documentation. Deliverables will include: * Updated Altium schematic * Updated PCB layout * Relay removal from IC13/IC14 * Correct permanent signal routing * Redundant driver review * ERC/DRC checks * Updated BOM * Gerber files * Pick-and-Place files * Written change report with electrical impact I’ll keep the rest of the design unchanged unless a clear improvement is needed, and I’ll focus on accuracy, safe net mapping, and board-house-ready output files. Best regards Ankit

@ElecHamza

Hi, I have completed multiple PCB re-spins and embedded controller optimizations using Altium Designer. I will carefully analyze your schematic to remove the two signal relays, establish permanent net-to-net routing, and clean up redundant driver components without breaking original functions. After running strict design rule checks, I will regenerate the complete Gerber, BOM, and pick-and-place fabrication files. I will also deliver a precise written report detailing the exact electrical impact of every trace modification. Best regards,

@chetanb382

Hi, We reviewed your requirements and this project matches our experience in PCB redesign, schematic modification, and embedded hardware development. We have worked on STM32/ESP32-based control boards, PCB revisions, design optimization, and manufacturing-ready Altium projects. We can analyze the existing relay logic, determine the correct permanent signal routing, remove the relays and any unnecessary driver circuitry, update both the schematic and PCB, perform ERC/DRC verification, and deliver complete fabrication files with a detailed change report. Our goal is to preserve the original functionality while keeping the redesign clean and reliable. Please visit our profile and portfolio to review our previous PCB design and redesign projects. Timeline:2 Days Budget:$20 USD A few questions: 1. Should both relays remain permanently ON or permanently OFF after removal? 2. Are the relay driver components also expected to be removed? 3. Will you provide the complete Altium project with libraries? We are available to start immediately and will provide regular progress updates. Regards, M&C Eng.

@wyderl24

Hello, I hope this message finds you well. I’m excited about your job posting and would love the opportunity to contribute to your team. I’m eager to learn new skills and bring value to your projects. Please take a moment to review my profile, and feel free to reach out if you have any questions Thank you for considering my application! Best regards, Wyder

@Dikshalikha

Hi, I'd love to work on your project. I have experience with Fusion 360, parametric CAD modeling, and preparing parts for 3D printing and manufacturing. I can rebuild your Tinkercad model as a fully parametric Fusion 360 design, correct the fillet to the exact 0.3125-inch radius, create the 105.5% scaled version, and deliver the F3D, STEP, and editable PrusaSlicer files. I'll ensure both models are clean, dimensionally accurate, and optimized for PETG printing. I'd be happy to discuss the print requirements and review your reference files before getting started. Best regards, Diksha L

@anjalio22

I would appreciate the opportunity to work on your PCB redesign project. I have experience with PCB schematic and layout modifications, including component removal, signal rerouting, and production-ready design updates. I will carefully analyze the existing Altium project, determine the correct permanent routing to replace relays IC13 (IMB03CGR) and IC14 (IM03GR), remove any redundant driver circuitry where appropriate, update both the schematic and PCB, and perform complete ERC/DRC verification to ensure the design remains electrically correct. After validation, I will regenerate all required manufacturing files, including Gerbers, BOM, and Pick-and-Place data, along with a detailed technical report documenting every modification and its electrical impact. My priority is accuracy and maintaining the original functionality of your embedded controller while making only the required design changes. If I identify any worthwhile improvements during the review, I will discuss them with you before implementing anything beyond the requested scope. Please give me one opportunity to handle your project. I assure you that I will complete the work with full dedication, accuracy, and professionalism, delivering a high-quality, production-ready design on time.

@TechBeMarc

Hello, I'm interested in doing this for you: - I'm specialized in light industrial systems which often use relay circuits - I'm familiar with the whole process from schematic to prototype/production builds Looking forward to hearing from you, Best regards, Marc

@vasimp78

Hello sir I have seen your project discription you want an pcb designer for editing your pcb and schematic you can trust me I working with relay from last 2 years I have expertise in relay based pcb designing in multilayer ibcan solve your problem with my excellent skills and provide you all nesosory information Thank you

@dipakkrkaushik

I understand that the key task here is not simply removing two relays, but correctly translating their switching behavior into fixed routing while preserving the original controller functionality. My approach would be: Review the schematic and PCB to identify exactly how IC13 (IMB03CGR) and IC14 (IM03GR) are being used, including the effective COM / NO / NC signal paths and any interaction with the relay driver circuitry. Determine the correct permanent net-to-net routing required after relay removal, rather than applying blind shorts. Update the schematic and PCB in Altium, including removal of redundant relay/driver circuitry where appropriate and implementation of direct routing or 0 Ω links if that is the cleanest solution. Run ERC/DRC and connectivity checks to ensure the change does not introduce any unintended electrical or layout issues. Regenerate the required fabrication outputs, including Gerbers, BOM, Pick-and-Place, and provide a concise engineering change report describing every modification and its electrical impact. I’m comfortable working directly in the original Altium project files and keeping the rest of the design unchanged unless a clear improvement is worth suggesting.

@patrickA123456

Hi there, The key here is not simply deleting two relays, but preserving the exact signal behavior they created while removing every unnecessary switching path safely. I would start by tracing IC13 and IC14 in the schematic and PCB to understand their common, NO, and NC connections, then define the correct permanent net routing before making any layout changes. After that, I’d update the schematic, remove unused driver parts if they are no longer needed, add direct traces or 0 Ω links where appropriate, and run ERC/DRC before regenerating clean fabrication files. I can handle this as a controlled PCB re-spin, with minimal disturbance to the rest of the design and a clear change report showing what was removed, what was permanently connected, and why the original function is preserved. One quick question: should the final connections follow the relays’ normally-open state, normally-closed state, or their energized operating state? I hope we have the opportunity to work together. Best regards, Patrick.

@NorthCoreVolt

Hello, I can help with this relay removal PCB redesign. I have hands-on experience with PCB repair, trace restoration, electronics troubleshooting, and circuit analysis. For this task, I can review the schematic and PCB, identify how IC13 and IC14 switch the signals, and determine the correct permanent net-to-net connections without blind shorts. I will update the schematic and PCB, remove or mark redundant relay driver parts if needed, run ERC/DRC checks, and provide updated manufacturing outputs and a short report explaining each change. Before starting, I would like to confirm one key point: should each relay be replaced by its normally-open or normally-closed contact path? Best regards, Anton

@BananaNPC

I would love to assist you with this. I have extensive experience with hardware layout and schematic design, including component lifecycle re-spins and relay-to-solid signal conversions. I understand the exact requirements: analyzing the current schematic to trace how IC13 and IC14 steer their signals, permanently bridging the correct paths while cleanly isolating or removing the redundant driver components (transistors, diodes, resistors) and ensuring no floating nodes or blind shorts are introduced. I will deliver a fully updated Altium project passing all ERC/DRC checks, a production-ready fabrication package (Gerbers, BOM and Pick-and-Place files) and a detailed engineering report explaining every electrical change and its impact. Accuracy and maintaining the signal integrity of the remaining circuitry will be my top priorities. The project delivery date is expected to be 3-4 days from my estimate.