
Closed
Posted
Paid on delivery
I’m kicking off a fresh MSP430 project built around the TI LaunchPad development board and need well-structured firmware that lets the board interact smoothly with user-interface hardware—buttons for input and LEDs or a small display for visual feedback. Here’s the core of what I’m after: • Firmware in C for the MSP430 LaunchPad that detects and debounces button presses, drives single LEDs or an attached character/graphic display, and executes simple control logic linking the two. • Clear, in-line comments and a short write-up explaining clock setup, GPIO configuration, and any libraries you pull in so I can extend the code later. • Build and flash instructions that work inside Code Composer Studio (or Energia if you prefer) plus a quick demo video or screenshots showing the interface in action. I already have the hardware on my bench, so once you supply the compiled binary and source I can verify it immediately. If you’ve tackled extra LaunchPad peripherals before—capacitive touch, boosters, or serial comms—feel free to flag that; future phases may branch out. Looking forward to seeing your approach and clean, readable code.
Project ID: 40798448
33 proposals
Remote project
Active 9 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
33 freelancers are bidding on average ₹7,800 INR for this job

Hi there, I carefully reviewed your MSP430 LaunchPad firmware requirements, including debounced button inputs, LED/display control, GPIO and clock configuration, clean C code, and straightforward build/flash documentation. I am a mechatronics engineer with almost half a decade of experience in embedded electronics, microcontroller-based systems, hardware prototyping, and interfaces such as UART, SPI, I2C, and USB. My background is well suited to developing structured firmware that interfaces reliably with physical controls and display hardware. Because embedded systems and hardware/software integration are already part of my core skillset, I can approach the firmware efficiently while keeping the code modular, clearly commented, and easy for you to extend in future phases. Please send me a message so we can discuss the project and start. Best regards, Samuel tshibangu
₹7,000 INR in 1 day
6.6
6.6

I can do the programming in C for this product. I will be able to create the logic between the button/led/lcd character lcd etc. using the IDE
₹3,000 INR in 7 days
5.4
5.4

Hi, I can develop clean, well-structured C firmware for your MSP430 LaunchPad, including reliable button debouncing, LED/display control, and responsive control logic. I’ll provide modular, well-commented source code, clock and GPIO configuration documentation, compiled binaries, and step-by-step build and flashing instructions for Code Composer Studio. I’ll also include a demonstration of the functionality and ensure the code is easy to maintain and extend for future peripherals. I’m ready to get started and would love to discuss your specific LaunchPad model and display requirements.
₹6,500 INR in 5 days
3.9
3.9

We at HardFault are thrilled to connect with someone launching a fresh MSP430 project on the TI LaunchPad, especially one focused on user-interface hardware like buttons and displays. Our team brings strong expertise in embedded hardware design and firmware development, having extensively worked with microcontroller environments such as STM32 and ESP32. This positions us uniquely to deliver well-structured firmware solutions like what you're seeking. Working as a team, we offer broader skill coverage and redundancy, ensuring faster delivery and robust solutions. For your project, we'll create clean, debounced button press detection and efficient control logic for LED or display interaction, all coded in C with comprehensive in-line comments. Once we're aligned on your exact requirements, we'll proceed with the initial development phase, after which you'll receive the compiled binary and source for immediate testing. To tailor our approach further, could you share more on any specific peripherals you're considering for future phases, such as capacitive touch or boosters?
₹7,510 INR in 7 days
4.0
4.0

Hi, I’m an embedded firmware engineer with hands-on experience in low-level C development across TI, ESP32, STM32, and similar platforms. I can deliver exactly what you’ve outlined for this MSP430 LaunchPad project. What I’ll provide: Clean C firmware with interrupt-driven button input and a reliable software debounce routine (timer-based, configurable hold/bounce window) LED single-pin and multiplexed drive, plus character display output via GPIO or I2C/SPI depending on your module Control logic tying inputs to outputs with a simple state machine — easy to extend Inline comments throughout, plus a short write-up covering clock configuration (DCO/SMCLK setup), GPIO register-level init, and any peripheral libraries used CCS project files with build/flash steps verified against a standard MSP430G2 or MSP430FR LaunchPad Screenshots or short demo video of the running interface I’ve also worked with UART serial comms and capacitive touch on TI platforms, so if future phases go that direction I’m already familiar with the peripherals. Budget and timeline are flexible — happy to discuss scope before you decide. Feel free to share which exact LaunchPad variant and display module you’re using so I can tailor the code from the start. Looking forward to working with you. Best, XinTian
₹9,999 INR in 7 days
3.4
3.4

You've got the LaunchPad on the bench and need firmware that just works — button debounce, LED or display feedback, and clean control logic you can actually extend later. That's exactly the kind of low-level work I do, and I'll deliver source, binary, and CCS build steps so you can verify the same day. Here's what I bring to this: → Shipped production firmware on ESP32, STM32 and Nordic nRF — same GPIO, clock and debounce fundamentals MSP430 needs, done for real products → I write debounce and state-machine logic that survives real hardware, not just a demo sketch → Full stack in-house: firmware, custom PCB design, 3D enclosure and full prototype shipping if you scale beyond the LaunchPad → I've worked capacitive touch and serial comms on other MCUs, so future phases won't need a new vendor My approach: → First, confirm your exact LaunchPad variant, button/display wiring and clock source so the GPIO config matches your bench → Then build the C firmware with in-line comments, debounced input, display driver and linked control logic, tested on hardware → Finally, hand over CCS build/flash steps, a short write-up on clock and GPIO setup, plus screenshots or a demo video For this scope, the cost would be ₹7,000.00 . Happy to walk you through my approach and past work on a chat.
₹7,000 INR in 2 days
3.5
3.5

I have 16 years of experience in embedded firmware and electronics R&D, working with microcontrollers, GPIO, displays and hardware interfaces. I can develop clean, well-structured C firmware for your MSP430 LaunchPad, including: - Button input handling with reliable debouncing. - LED control and user-defined control logic. - Character or graphic display integration, depending on the display interface. - GPIO configuration, clock setup and interrupt handling. - Modular, commented and easily extendable firmware. - Code Composer Studio project with source code and compiled binary. - Build, programming and flashing instructions. - Demo screenshots or video demonstrating the functionality. I will first verify the exact MSP430 LaunchPad model and connected peripherals, then develop and test the firmware accordingly. I also have experience with embedded peripherals, UART, I²C, SPI, sensor interfaces and communication protocols, which can support future expansion. Best regards,\ Subhash Suman\ Embedded Systems | Firmware Development | Hardware Integration
₹10,000 INR in 7 days
3.9
3.9

You've clearly thought this through already—debounced buttons, display feedback, and clean commented code you can extend later is exactly how firmware should be handed over. Since you've got the LaunchPad on your bench, you'll be able to verify the binary the same day I deliver it. Here's what I bring to this: → I've written production C firmware across MSP430, STM32, and ESP32 platforms, with GPIO, timers, and display drivers done properly the first time → Button debouncing and LED/character display control are core embedded work I've shipped on real hardware, not just dev boards sitting on a desk → Full stack under one roof—firmware, PCB design, 3D enclosures, and prototype shipping—so future phases stay with one team → I can also cover capacitive touch and serial comms on LaunchPad if you want to branch out later, and I'll include CCS build/flash steps plus a demo video My approach: → First, I'll confirm your exact LaunchPad variant and display type, then map out clock setup and GPIO config before writing any logic → Next comes the firmware—debounced inputs, display driving, control logic linking them, all clearly commented with a short write-up on clocks, GPIO, and libraries → Finally, compiled binary, source, CCS/Energia instructions, and screenshots or a demo video so you can flash and test immediately
₹6,000 INR in 3 days
3.4
3.4

MSP430 LaunchPad firmware with buttons and LEDs or a small display is straightforward bare-metal C, and I keep it easy to extend. I would deliver C firmware for the LaunchPad that sets up the clock and GPIO, reads buttons with interrupt-driven debouncing, drives single LEDs or a character/graphic display, and runs the simple control logic between them as a small state machine. Comments in the code and a short write-up cover the clock setup, the GPIO configuration and any library used, so you can add features later. You get build and flash instructions for Code Composer Studio (Energia if you prefer), the compiled binary and source, and a short demo video of the interface working. Which LaunchPad (for example MSP-EXP430G2 or FR5994) do you have, and what display or LED arrangement should it drive?
₹5,000 INR in 7 days
3.9
3.9

Hi, there. Recently delivered a complete MSP430FR5994 LaunchPad firmware suite handling capacitive-touch buttons, e-paper display updates via SPI, and ultra-low-power LPM3.5 wake logic for a battery-powered sensor node. Implemented hardware-accelerated CapTIvate debouncing eliminating software overhead, resolved SPI timing conflicts with the e-paper driver by restructuring the USCI_B ISR, and cut standby current to 1.2 µA through aggressive clock gating and FRAM retention tuning. I am planning a modular HAL separating GPIO, Timer_B PWM for LED dimming, and a display driver abstraction supporting both HD44780 and SSD1306 via I2C/SPI. I offer a CMake-based build targeting CCS and GCC, generating .txt/.bin artifacts with automated flash scripts using MSPDebug. The approach leverages FRAM write-speed for instant state checkpointing during button interrupts, avoiding flash wear. Previous work includes porting FreeRTOS to MSP430X for deterministic multi-tasking on booster packs and implementing a custom BSL over UART for field updates without a debugger. If I use my previous experience, your project will likely be completed successfully. Hope to discuss this in detail. Through detailed discussion, I think I can find the better solution to finish your project successfully. Thank you
₹7,000 INR in 7 days
2.6
2.6

Hello, Debounce and timing are the most common pitfalls with button-driven MSP430 LaunchPad projects; left unchecked you get missed presses, spurious triggers, and hard-to-maintain polling loops. I will implement timer-driven debounce with edge-detection via GPIO interrupts, keep ISR code minimal, and handle button state in a small state machine so the UI logic remains deterministic and extensible. I have delivered embedded firmware for TI microcontrollers and similar LaunchPad-style boards: affordable LaunchPad prototypes with capacitive touch inputs, low-power clock configurations for battery projects, and display-driving code for character and small graphic modules. I will provide well-commented C source targeted to the MSP430 LaunchPad toolchain, with short inline notes on clock setup (DCO/ACLK choices), GPIO configuration, timer modules used for debounce, and any public driver code included. I will start by wiring the button inputs to interrupt-capable pins, configure a Timer_A instance for a 10-50 ms debounce window, and implement LED/display updates from a non-blocking control loop. The deliverable set will include source, compiled binary, build and flash instructions for Code Composer Studio (optionally Energia), and a short demo video or screenshots showing button presses and LED/display responses. - Do you have a preferred display module (character LCD, SPI/I2C OLED) already attached to the LaunchPad? - Which MSP430 variant on the LaunchPad are you using so I can target the correct device and linker settings? Open to a quick chat if you want to dig into the details. @melopgabriel
₹1,800 INR in 18 days
2.4
2.4

Hi, I can help develop structured Embedded C firmware for your TI MSP430 LaunchPad to handle button inputs, LED control, and display-based user interaction. Proposed Approach Review the MSP430 LaunchPad model and available GPIO pins. Configure the system clock and GPIO peripherals. Develop button detection with reliable software debouncing. Implement LED ON/OFF control based on button inputs. Integrate the character or graphic display. Develop control logic to connect button actions with LED and display responses. Compile, debug, and test the firmware using Code Composer Studio. Prepare flashing instructions and a demonstration of the working interface. Deliverables Complete Embedded C firmware source code. Button detection and debouncing implementation. LED control and display integration. Clock and GPIO configuration documentation. Compiled firmware binary. Code Composer Studio build and flashing instructions. Demo video or screenshots. Short technical documentation with code comments.
₹10,000 INR in 7 days
1.9
1.9

A clean way to do this is a small timer-based debounce for the buttons and a simple state machine that drives the LEDs, all on a stable DCO clock setup. I'll write it in C for Code Composer Studio, with clear comments and a short note on clock, GPIO and any library used. You'll get source, binary, build and flash steps, and screenshots of the build and expected behavior within 3 days. I've done a lot of embedded firmware work, including STM32, ESP32 and Arduino. Which LaunchPad model and display are you using?
₹3,500 INR in 3 days
0.5
0.5

I can write the MSP430 firmware in C for Code Composer Studio, prioritizing the modular structure you need for future expansion. The workflow: Define GPIO/Clock -> Implement interrupt-driven debounce -> Link logic to LED/Display output -> Compile in CCS. - Firmware in C for MSP430 LaunchPad - Debounced button input & LED/display control - In-line documentation for clock & GPIO configuration - Build instructions for Code Composer Studio - Visual verification via requested demo media The main hurdle is managing the low-power modes while keeping the display refresh cycles stable; I will use timer interrupts to ensure the UI remains responsive without blocking the main control loop. Delivery: 2 days I look forward to providing the high-quality firmware you need; feel free to set the milestone once you are ready to proceed.
₹1,500 INR in 2 days
0.0
0.0

Hello! Your MSP430 LaunchPad firmware in C, ready 4 days after the award. You pay us nothing until you've seen the source code and the compiled binary. Here is what you get: • C firmware: button reading with debounce, LED or small display output, simple control logic • Short write-up: clock setup, GPIO configuration and any library we use • Build and flash notes for Code Composer Studio, plus a short simulator recording • Clear in-line comments so you can extend the code later Good to know: we have no LaunchPad here, so we test in a simulator. You flash it on your bench, and we fix any difference. ✅ Included: 3 small changes within 3 weeks after you approve the work, and we fix any bug of ours for free. Bonus: a short guide for adding one more button or LED later. Price: ₹6,100 for the whole job. Which board do you have, and is it LEDs only or a small display too? P.S. Oldrich, the owner, directs the work and stands behind every result. We work with the help of modern technologies, including AI, which keeps us fast and precise.
₹6,100 INR in 4 days
0.0
0.0

Hi, a clean MSP430 UI layer is mostly about getting three things right: stable debouncing without blocking the CPU, a predictable clock, and display updates that never stall button handling. My approach in C for Code Composer Studio: stop the watchdog, set DCO to calibrated 1/8/16 MHz (CALBC1/CALDCO), Timer_A tick every 1 ms for a non-blocking debounce state machine (short press, long press, release events), GPIO interrupts on the buttons that only wake the CPU from LPM3, and a small event-driven control loop linking buttons to LEDs and a HD44780 character LCD (or SSD1306 OLED over I2C if that's what you have). Each part in its own module (clock, gpio, buttons, display, app) with in-line comments. You get source, compiled binary, CCS build/flash steps and a short write-up on clock, GPIO and libraries. Milestone 1: buttons + LEDs. Milestone 2: display + write-up. INR 7,500 in 4 days, and I'm flexible on scope and price for later phases (capacitive touch, UART). Which LaunchPad exactly (G2553, FR2433, FR5969?) and which display is on your bench?
₹7,500 INR in 4 days
0.0
0.0

Your requirement for firmware that effectively handles button inputs and visual feedback on the MSP430 LaunchPad is clear. I see the importance of structured code, especially with in-line comments to facilitate future extensions. My approach would include implementing robust debouncing for button presses, ensuring seamless interaction with LEDs or displays. I also prioritize clear documentation for clock and GPIO configuration, which will be essential for your further development. Considering your interest in potential future peripherals, I can ensure the design is modular, making it easier to integrate additional features later. What specific control logic are you envisioning for the user interactions? Regards, Ilyaas
₹6,250 INR in 7 days
0.0
0.0

Hello, relevant completed Upwork work includes MIMXRT1062 bare-MCU firmware ($30, 5/5) and C++ OV5640-to-TFT firmware on RT1062 ($1,030, 5/5). I can apply that register-level embedded-C and display-interface experience to your LaunchPad; I am not claiming an identical prior MSP430 project. I would use a small, documented C state machine with clock/GPIO initialization separated from application logic, timer-based button debounce, and an LED or agreed display driver. Avoiding blocking delays will keep input response predictable. Deliverables: editable source and CCS build project, target binary, commented setup/driver code, build/flash instructions and a short explanation of the control flow and libraries. INR12,500 covers one LaunchPad and the agreed buttons/LEDs plus one selected display if required, including one review revision and client-board validation with demo screenshots/video. Please confirm exact MSP430/LaunchPad model, pin map, display/controller/interface, desired button actions and CCS version before accepting award. You provide the existing board and flashing/test access; I do not own your exact setup. Proposed 5 days from an agreed kickoff once these inputs and a validation slot are ready. Additional touch/BoosterPack/serial features are later scope.
₹12,500 INR in 5 days
0.0
0.0

Hello, I'm a Systems Engineer with professional experience in embedded systems, microcontroller programming, electronics, and hardware-software integration. I've worked on real-world systems involving sensor interfaces, GPIO control, serial communication, and embedded Linux. For your MSP430 LaunchPad project, I can develop clean, modular C firmware covering button input handling, reliable debouncing, LED control, and the required application logic. I can also provide commented source code, clock and GPIO configuration documentation, and Code Composer Studio build and flashing instructions. Before starting, could you confirm the exact MSP430 LaunchPad model and whether you're using onboard LEDs or an external display? I can start immediately and coordinate with you for hardware verification. Best regards
₹5,500 INR in 4 days
0.0
0.0

Hi, Your visitors should be able to interact with the MSP430 LaunchPad development board using buttons and visual feedback from LEDs or a small display. I would organize the firmware to detect and debounce button presses, drive LEDs or a display, and execute simple control logic. This decision enables smooth interaction between the user interface hardware and the board. I would connect the firmware components using clear, in line comments and a short write up explaining clock setup, GPIO configuration, and any libraries used. This approach allows you to extend the code later. I would verify the firmware by checking the compiled binary and source code, and providing build and flash instructions that work inside Code Composer Studio, along with a quick demo video or screenshots showing the interface in action, so you can verify it immediately.
₹7,000 INR in 3 days
1.4
1.4

Guwahati, India
Payment method verified
Member since Oct 21, 2019
₹12500-37500 INR
₹12500-37500 INR
₹3500-7000 INR
₹1500-12500 INR
₹37500-75000 INR
$10-30 USD
₹1500-12500 INR
$10-30 USD
$750-1500 USD
₹12500-37500 INR
$30-250 USD
$8-15 USD / hour
$250-750 USD
$250-750 USD
$30-250 USD
$30-250 USD
$30-250 USD
$250-750 USD
$8-15 USD / hour
₹1500-12500 INR
$25-50 USD / hour
$10-3000 USD
$750-1500 AUD
$15-25 USD / hour
₹12500-37500 INR