Motion-Tracking Sensor Prototype

@amelectronics

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.

@tshibsamuel477

Hi there, I have carefully reviewed your compact movement-tracking prototype requirements and can handle the complete development from component selection and schematic design through PCB layout, embedded firmware, assembly support, and bench validation. With nearly five years of experience in mechatronics, embedded systems, sensors, BLE, PCB design, and C/C++ firmware, I can develop a small, reliable motion-tracking board using a suitable IMU, implement filtering and calibration, and stream clean XYZ data over serial or BLE. I will provide the complete manufacturing package, firmware, test results, and bring-up documentation, and I can also support first-prototype assembly if required. Please send me a message so we can discuss the size, power, and tracking-accuracy targets and get started quickly. Best regards, Samuel tshibangu

@Adeel2k14

We are experienced electrical and firmware engineers with deep expertise in motion tracking, IMU sensor fusion, and compact PCB design. We can design, build, and deliver a turnkey prototype for your movement-tracking device. Our team will select low-power IMU components, design a compact multi-layer PCB, and develop embedded firmware to output filtered, calibrated XYZ motion data via BLE/serial. We handle schematic capture, layout, board bring-up, and hand-assembly of initial prototypes, delivering a fully tested unit with complete manufacturing files (Gerbers, BOM, firmware). We look forward to bringing your motion-tracking prototype to life.

@mzdesmag

Hello sir, Did go through your job description and glad to share that I have enormous experience in working with Motion-Tracking Sensor Prototype I'm a seasoned programmer and Engineer with quality experience in Flutter, React, Node.JS, SpringBoot, Frontend and Backend Development, Python, Matlab, R studio, C, C++, C#, OpenCV, OpenGL, Tesseract OCR, google vision, Statisticaal programming/R progamming data analysis Computing for Data Analysis Time Series & Econometric, Machine learning, AI, Deep learning, Matlab and Mathematica, 3D modeling, CAD/CAM,AutoCAD, 2D, Architectural Engineering, SolidWorks, Unity 3D, AutoCAD, 2D drawing, 2D draftingPCB, Electronics, Arduino, Embedded Systems Automation, Embedded and Firmware , IOT, Electrical/Mechanical Engineering I am a TOP Rated Freelancer, and you can check my reviews here as well: https://www.freelancer.com/u/mzdesmag. Looking forward to potentially working together on this project. Thanks and Best regards, Adekunle.

@debosx

Hello! I'm a highly skilled PCB Designer with over 10 years of expertise in delivering reliable and efficient PCB designs. I specialize in creating precision designs tailored to client's needs, utilizing top-tier design tools such as Altium Designer, Autodesk Eagle, KiCad, EasyEDA, Siemens PADS, DipTrace, Allegro/OrCAD, Fritzing and Proteus. My goal is always to ensure the highest quality and performance in every project. Core Expertise : • Schematic Capture & Layout Design • Component Selection & Library Management • Reverse Engineering (PCB Replication, PCB Cloning) • Gerber, BOM, and CPL File Generation & Manufacturing Support • Design for Manufacturability (DFM) and Design for Assembly (DFA) • PCB Design & Development (Single, Double, Multi-Layer, Flexible PCBs) Industries Served : • Medical Devices • Telecommunications • Consumer Electronics • Industrial Equipment • Automotive Electronics • Safety and Security Devices Why Choose Me? • Attention to Detail and Commitment to Quality • Strong Communication Skills & Client-Centric Focus • Timely Delivery & Flexible Approach to Meet Project Requirements I would love to help you with your next PCB design project. Feel free to reach out, and let’s discuss how I can bring your ideas to life! Best Regards, Utpal

@Mahmoud00Ibrahim

Hi, I can develop this project end-to-end with strong experience in sensor-based embedded systems and compact PCB design. I can handle: * Motion sensor selection + schematic * Compact 2-layer PCB layout * Prototype bring-up and testing * Gerbers, BOM, Pick & Place, and manufacturing files * Firmware for sensor initialization, filtering, calibration, and XYZ data streaming via UART/BLE Hardware design will be quoted separately from firmware/software, so you can choose either part or both depending on your needs. I can also help with PCB assembly and the first prototype units. Ready to start once you share the mechanical constraints and requirements.

@mahmoudralizadeh

I am an Electronics Engineer experienced in embedded systems, sensor interfacing, PCB design, and firmware development. I can handle the project end-to-end, including: - IMU/component selection and complete schematic design - Compact 2-layer PCB layout - Embedded firmware for sensor initialization, filtering, calibration, and XYZ data streaming - Serial or BLE communication - Prototype bring-up and bench testing - Data logging and sample plots for validation - Gerbers, BOM, pick-and-place files, compiled firmware, and bring-up documentation I will focus on reliable sensor data, low power consumption, compact layout, and readily available components. The final deliverable will be a fully tested prototype capable of continuously streaming movement data for at least 30 minutes without instability. I can start immediately and take the design from concept to a working prototype.

@shadabkhan92

Navigating the delicate balance between software and hardware is our specialty, and your motion-tracking sensor prototype project seems to be tailor-made for it. I’m confident that my extensive background in electrical engineering, embedded system design, and experience with designing PCBs will be the perfect fit for your needs. In addition to having a keen understanding of sensors, I've worked extensively with accelerometers and gyro-combos like the one you're considering in order to ensure accurate movement tracking. Your commitment to power management and footprint size aligns with my values when creating sleek yet functional designs. Our real value comes from our analytical approach to data collection. My ability to transform raw data from your motion sensor into readily comprehensible XYZ movement data is backed by a proven track record of implementing advanced data filtering techniques to extract only the most accurate and meaningful information from raw datasets. I will deliver nothing short of meticulous bench validation at every stage of this process, providing you with reliable product functionality without any compromise on user experience or crashing issues

@cesur135

As an Electrical and Electronics Engineer with expertise in embedded systems and process automation, I'm uniquely qualified for your motion-tracking sensor prototype project. During my career, I've developed a deep understanding of the technical aspects you're seeking. My proficiency in using a wide range of programs including SIEMENS TIA Portal, Simatic Manager, Honeywell DCS C200 and many more will enable me to adeptly handle the various tasks involved in this project. My specialization in industrial automation has equipped me with the skills necessary to select the right components for your motion sensor, design a PCB layout that maximizes space efficiency and ensure reliable firmware that filters raw data effectively. Moreover, having worked on system software to monitor different equipment in factories and plants, I understand the importance of ensuring the accuracy and reliability of your tracking data. In addition to my technical skills, I have experience commissioning complex projects in various industries, demonstrating not only my ability to handle intricate tasks but also my dedication to delivering high-quality results within a stipulated time frame.

@Zainrais0786

Looking for an experienced hardware design engineer to develop a compact, sensor-based device? Ive got your back Hi, I am Zain. My expertise includes • Embedded Systems • Firmware Development • Circuit Design • PCB Design • KiCAD / Altium • Mixed Signal PCB Designs • Simulations etc. Want to start early? Lets chat for further discussion Best regards

@dannisacsl

I m a 20 years+ electronic engineer, I mainly work in circuit design and Embedded firmware development. I have good experience in real time, wireless application product (BLE, IoT…..etc), for example: smart watch, bike computer, GPS tracker.......etc. I m also circuit designer in both schematic and PCB in KiCad, more detail can be shared later My working base in Hong Kong, will be good communication environment with you and sourcing way in China I sure that I can finish your job in well, wish to have chance to talk with you.

@nehasingh17

We at HardFault can take this from concept to a turnkey, testable prototype, covering component selection, schematic capture, compact 2-layer PCB design, firmware and bench validation. We have already worked on battery-powered devices using **ESP32 and motion sensors**, including sensor interfacing, data filtering, calibration and reliable real-time movement streaming, so your requirements are closely aligned with our experience. We’ll deliver the complete hardware and firmware package, including Gerbers, BOM, pick-and-place, compiled firmware, calibration routine, sample data plots and a clear bring-up guide. The firmware can expose clean XYZ movement data over BLE or serial for logging on a phone or laptop, with power consumption considered from the start. We can also support quick-turn PCB assembly or hand-assemble the first units where practical, allowing us to validate the actual hardware quickly rather than stopping at the design stage. Would you like us to base the first prototype around an ESP32 + low-power IMU and optimize the sensor, filtering and battery architecture around your required tracking accuracy?

@alluankit01

Hi, I can develop your motion-tracking sensor prototype from concept to a working embedded device, including schematic design, PCB layout, firmware, calibration, and validation. My approach will be to first define the tracking accuracy, power requirements, communication method, and mechanical constraints. Then I’ll select the appropriate IMU/sensor, design the electronics, create a compact PCB, develop firmware for sensor initialization, filtering, calibration, and stream clean XYZ movement data over BLE or serial. I’m comfortable with: * Motion sensors / IMU integration * Accelerometer and gyro calibration * Embedded C/C++ firmware * BLE communication * PCB schematic and layout * Sensor filtering and data processing * Prototype testing and debugging Deliverables: * Complete schematic * PCB layout files * BOM with sourceable components * Gerbers and manufacturing files * Firmware source and compiled build * Calibration routine * Sample movement data plots * Bring-up and testing guide * Prototype validation support I’ll focus on a reliable, compact design with stable sensor data streaming and a clean path toward future production. Best regards Ankit

@sidratulm20

Are you looking for an experienced embedded/electronics engineer who can take your motion-tracking concept from sensor selection through a tested, turnkey prototype? I can handle the complete development, including: IMU/accelerometer/gyro selection based on accuracy, power, availability, and cost Complete schematic and power architecture Compact 2-layer or higher PCB layout with sourceable components Embedded firmware for sensor initialization, calibration, filtering, and XYZ movement data Serial and/or BLE data streaming for laptop/phone logging Bench testing and calibration validation Sample-data capture and plots to evaluate sensor performance Gerbers, BOM, pick-and-place files, and compiled firmware Bring-up and assembly documentation For the firmware, I’ll implement a clean sensor data pipeline with appropriate filtering and calibration so the output is stable and usable rather than simply exposing raw IMU readings. I’ll also verify continuous operation for the required 30-minute bench test and document any limitations or tuning recommendations. I have experience with PCB design, embedded systems, ESP32/Raspberry Pi/Arduino-class platforms, sensors, wireless communication, and prototype validation, and can also assist with quick-turn PCB assembly if required. Once you provide the mechanical constraints and preferred communication method, I can propose the exact architecture, components, milestones, and turnaround. Best regards, Sidra

@hexabitzprojects

**Dear Client,** Your movement-tracking prototype is a strong match for my **15+ years of embedded hardware, sensor integration, PCB design, and firmware development experience**. I can take the project from concept to a working prototype, including: * Motion-sensor selection based on **accuracy, noise, sampling rate, and power consumption**. * Complete schematic and compact **2-layer PCB** using readily available components. * Embedded firmware for sensor initialization, calibration, filtering, and clean **XYZ movement data**. * Serial and/or BLE data output for laptop/phone logging. * Basic calibration and validation procedure with **sample data plots**. * Testing for stability, sensor consistency, and normal handling. * Complete **Gerbers, BOM, pick-and-place, compiled firmware, source code, and bring-up guide**. * Prototype PCB assembly/hand-assembly support where practical. I would optimize the design around your required movement accuracy and operating time rather than selecting an IMU purely by cost. **Please share the mechanical dimensions, expected movement range, required sampling rate, and preferred communication method (USB/UART/BLE). I can then propose the sensor, architecture, timeline, milestones, and cost.** **Best regards,** **Subhash Suman** Embedded Systems | IMU | ESP32/STM32 | PCB Design | Firmware | BLE | Sensor Integration | 15+ Years Experience

@bojans9

Hello, I can handle the prototype end to end, including sensor selection, schematic, compact PCB layout, embedded firmware, calibration, BLE or serial data streaming, bench testing and complete manufacturing files. With over 10 years of software development experience and a background in embedded and hardware-related systems, I can approach the firmware and electronics as one integrated system. I’ll focus on stable sensor initialization, filtering, reliable XYZ data and a practical low-power design. I’m confident the prototype can be completed successfully within the ₹12,500 to ₹37,500 budget, assuming the mechanical requirements remain within the stated scope. Which sensor accuracy and sampling rate do you require? What are the maximum PCB dimensions? Should BLE be the primary communication method or is serial sufficient for the first prototype?

@rfandelectronics

Having extensive professional experience in Arduino, Electronics, Embedded Systems, PCB Design and Layout, my team at Radionica possesses a unique set of skills that would be an asset to the successful completion of your motion-tracking sensor prototype project. We understand the value of comprehensive design and meticulous implementation. As such, we can guarantee you a fully functional and robust prototype from schematic capture to board manufacturing, including firmware development. SpaceX relied on us for their RF systems and we are confident that our attention to detail is what makes us stand apart. From component selection to bench validation, we'll ensure that your prototype meets the defined accuracy and power goals. Our RF & Microwave Circuit Design expertise will contribute significantly as we optimize the sensors for all forms of movement accurately. The resulting clean XYZ data will be easily accessible with a simple serial or BLE link for convenient logging on any device. Our commitment to quality extends post-prototype stages; providing you with all manufacturing files and a comprehensive bring-up guide. Furthermore, if needed, we can leverage our strong network in quick-turn PCB assembly contacts to expedite the timeframe for you. Above all, we are driven by efficiency and optimization. You can trust our team

@satyak785

Hi, I can deliver your movement-tracking device as a complete, turnkey prototype—from electronics design to production-ready files. I'll handle sensor selection (IMU/accelerometer + gyro), schematic capture, compact 2-layer PCB layout, embedded firmware, calibration, and validation. The firmware will provide stable XYZ motion data with filtering (IIR/Kalman as appropriate) and stream it over USB serial or BLE for real-time logging on a laptop or phone. I'll also perform bench testing, generate sample plots, verify 30+ minutes of continuous operation, and optimize for low power and reliable performance. Deliverables include Gerbers, BOM, pick-and-place, source code, compiled firmware, and a concise bring-up guide. I can also assist with quick-turn PCB fabrication/assembly and hand-assembled prototype units if required. I focus on clean, manufacturable designs that are easy to source and scale into production.

@eternitech

Hi, New on Freelancer — 20 years of development experience behind us. We're taking our first few projects here at a fraction of our normal rate purely to build our review history. You get senior agency work at junior pricing; we get a review. Straight trade. For a compact sensor-based device like yours, ensuring that the BLE integration doesn't interfere with the sensor's accuracy is crucial. I'd start by testing the signal strength and latency of the BLE module to maintain precise movement tracking. Could you share any initial schematics or design files you have?