Lukket

Power electronics rectifier and inverter with gerber files

I need the schematic, BOM, gerber, Centroid and any other required files for pcb manufacturing of a power electronics component.

- Rectifier has three diodes below and 3 IGBTs above. Average current per diode or IGBT is 1 amp and peak inverse voltage is 500 V.

- DC capacitor link must be of 600 V and 10 uF.

- Inverter must be of 6 IGBTs, 1 amp average current and 600 V.

- Microprocessor to be used is PIC16F18075.

- A linear 10k potentiometer must be connected to an input of the MCU.

- The line voltage is 380 Vrms 50 Hz

- DC bus voltage must be sensed and sent over to the MCU.

- Input voltage of all three phases must be sensed and sent to the MCU. Esch phase must be sensed with respect to a virtual neutral. This virtual neutral will be created using three 1k resistors in wye connection to the three phases.

The components must be selected from DigiKey and they have to be cheap. This is a test prototype, no need for expensive components. There are no constraints with the pcb size, so you must also make it cheap.

Færdigheder: Elektronik, PCB Layout, Elektrisk Ingeniørarbejde, Microcontroller, Kredsløbs Design

Om klienten:
( 1 bedømmelse ) Recoleta, Argentina

Projekt ID: #34836654

28 freelancere byder i gennemsnit $542 timen for dette job

(55 bedømmelser)
7.6
(49 bedømmelser)
7.9
iquicksolution

Hey there! I'm a professional electrical engineer having more than 4 years of experience in power electronics. I've read your description and I can do your task perfectly.

$300 USD in 3 dage
(100 bedømmelser)
6.3
hayteekeys

Hello, I am a Researcher in Electrical Engineering with specialization in Control Systems (Linear and Nonlinear Control Systems). I have Master's degree in Elecatrical Engineering and Bachelor's Degree in Electronics E Flere

$250 USD in 2 dage
(25 bedømmelser)
5.7
hsh564cf84accd96

We will do your work Hi my Professional Aim is: (Services then Solutions then Satisfactions) I hope you are [login to view URL] an experience in this field from last 5 years i am sure i can do it perfectly with in a time and bu Flere

$400 USD in 7 dage
(64 bedømmelser)
5.9
engrhassanwali

Hi! I have understood your requirements about your project with every detail of it. I am an Electrical Engineer with more than 9 years of experience in electronics, circuit design, PCB layout, Verilog, FPGA, Embed Flere

$750 USD in 15 dage
(22 bedømmelser)
5.5
HarimohanG

Good day, I have more than 30 years experience in Power electronics designing. I can provide schematic, BOM, Gerber, and other required files for PCB manufacturing of a power electronics component in a quality and time Flere

$500 USD in 2 dage
(5 bedømmelser)
5.2
ComiKs

Dear client, Nice to meet you. I have been working as a firmware and hardware designer for 6+ years. I had developed several similar projects using the various microcontrollers such as STM32F1/2/3/4/7xx, PIC16/18xx, Wi Flere

$500 USD in 7 dage
(6 bedømmelser)
5.2
LashkoA97

❤️❤️❤️Dear, client! How Are You?❤️❤️❤️ I have read your project carefully and understood about what your goal is. I have 6+ years experiences for developing electronics and electrical devices. I would love to serve you Flere

$450 USD in 3 dage
(8 bedømmelser)
4.9
preetpalsingh33

hello sir, how are you. I read your project description and i am interested in this project. Pls have a look on the link below. [login to view URL] https://www.freelancer.com/u/ Flere

$750 USD in 7 dage
(36 bedømmelser)
5.2
hamzazayyad

Hello I am a verified engineer and preferred freelancer and I have more than 15 years of experience in the embedded systems design and pcb design and electronics systems design for the project I can provide you with a Flere

$500 USD in 7 dage
(20 bedømmelser)
5.0
jensgulow71

hello? I have read your project carefully. Your project is nothing to me. I am not only an expert in electrical engineering, but also have a lot of experience in designing inverters and other power circuits and introdu Flere

$500 USD in 7 dage
(6 bedømmelser)
4.6
cmsivolella

Hola, Buenas tardes, que tal? Soy un Ingeniero en Electrónica especializado en sistemas de potencia y electrónica de potencia. He diseñado sistemas similares al que estás necesitando para aplicaciones de control de mot Flere

$450 USD in 15 dage
(5 bedømmelser)
4.2
AmazingEngr76386

I am an Electrical and Electronics Designs Engineer specializing and Accomplished in the area of Embedded Systems, Product Design & Prototyping, Schematics, and PCB layout. I have run quite some miles being in the f Flere

$500 USD in 7 dage
(3 bedømmelser)
4.1
mcollinscalz

Hello I have deep knowledge of embedded system and rich experiences with PCB design and firmware development. Having checked this requirements and I can deliver the schematic, BOM, gerber, Centroid and any other requir Flere

$500 USD in 7 dage
(7 bedømmelser)
4.0
kamilkhalid

Hello. ⭐ ⭐ ⭐ ⭐ ⭐ I have been working for more than 10 Year in the field of Electronic engineering (Hardware / Firmware). I have extensive experience in the areas including Circuit Design, Circuit Simulation (Analog, D Flere

$500 USD in 7 dage
(3 bedømmelser)
3.8
hnutweblera

Hi. I have good experience with PCB design and can help your project. I have read your project details and can make schematic and pcb, gerber for your requirement. Hope you choose me. Regards.

$750 USD in 10 dage
(2 bedømmelser)
3.1
Shahabijan

I have been teaching in universities since 2014. Have done my masters in robotics. I am an assistant professor at a university in Pakistan in EE Dept. I have been teaching since 2014 and am also working on my PhD in co Flere

$500 USD in 7 dage
(3 bedømmelser)
2.3
ravadamadhu245

I am studying Ph.D. in IIT. I work on power electronic converters and control. mostly on dc-dc converters and controls. I have experience in making PCB layouts and designing. I have a vast experience in Matlab, Psim, L Flere

$600 USD in 7 dage
(0 bedømmelser)
0.0
jsi82882

hi how are you bro I have read with interest your proposal and am very interested in your limitations. As an expert in power electronics, I will do my best to help your equipment overcome the influence of many factors. Flere

$600 USD in 7 dage
(0 bedømmelser)
0.0