Færdiggjort

NANO 3.0 (ATMEGA328) WS2812 Driver

Hi,

Im wanting a 'mini' breakout board and software designed to work with the following ATMEGA board that will run / control WS2812 LED.

Breakout Board same size as NANO 3.0 board.

- Connect into the pins on NAN0 3.0 board.

- LED for power status.

- Have a 4 or 6 pin dip switch for controlling the 'count' of WS2812 LEDS.

- Have an opt isolation connection for reading the 'trigger wire' at which point the LED SEQUENCE will run.

- Clear markings on the board as well as documentation.

- Breakout Board should have connector for +, -, DATA for WS2812B

- Connectors for external connections will be JST (2 pin and 3 pin).

Software

There is already multiple code libraries out there and sample code, just need modified slightly to read the input from the 'dip switch' of breakout board.

All documentation, source files, and basic step guide of programming either through USB/Arduino IDE or pickit 3.

BELOW is information on the the PART, although these are standard NANO 3 boards.

[login to view URL]

The Arduino UNO is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Upgraded revision featuring stronger reset circuit and CH340gUSB

This upgraded model is completely compatible with original Arduino UNO.

Microcontroller: ATmega328P

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Input Voltage (limits): 6-20V

Digital I/O Pins: 14 (of which 6 provide PWM output)

Analogue Input Pins: 6

DC Current per I/O Pin: 40 mA

DC Current for 3.3V Pin: 50 mA

Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader

SRAM: 2 KB (ATmega328P)

EEPROM: 1 KB (ATmega328P)

Clock Speed: 16 MHz

Evner: Elektronik, Microcontroller, Elektrisk Ingeniørarbejde, PCB Layout, Arduino

Om klienten:
( 167 bedømmelser ) Buddina, Australia

Projekt ID: #34036123

Tildelt til:

preetpalsingh33

hello sir, how are you. I read your proposal and i am interested in this project. i Have worked on WS2812, let us discuss more..................................

$50 AUD in 7 dage
(31 bedømmelser)
5.2

14 freelancere byder i gennemsnit $50 timen for dette job

MedaniAhmed

Hi there I have just seen your posted project and I think it’s quite easy I can do the prototype firstly in simulation software and check the functionality then we can move it to a pcb using Altium or Eagle I hope w Flere

$180 AUD in 7 dage
(9 bedømmelser)
5.2
AndrijIN

Hi! So as I understand you are about to make an expansion board for NANO v3.0 in form to connect this board directly to the pins of the NANO, correct. Do you mean a 4/6 position DIP switch to set the LED count? I can m Flere

$50 AUD in 4 dage
(20 bedømmelser)
5.2
etalhak

Hello, I am an electronics and telecommunication engineer and my major is wireless systems' design. I am experienced in hardware and embedded systems' design. I have designed/printed/tested many PCBs and I am quite exp Flere

$30 AUD in 7 dage
(48 bedømmelser)
5.5
Adeel2k14

Thanks for posting the project here I am electrical engineer. I have completed many projects in the field of embedded systems and electrical for my foreigner’s client based in USA, UK, Africa, Turkey, Canada, and Ger Flere

$30 AUD in 7 dage
(23 bedømmelser)
5.2
mahmoudralizadeh

Hi Do you want to design a customized arduino nano PCB ? How do you want to controll LEDs? I am an electrical engineer with expert in microcontrollers and circuit design Thanks

$100 AUD in 7 dage
(8 bedømmelser)
4.0
Sarath129

Hi , I am an embedded systems engineer.I can give you the code that can control WS2812 addressable (Driver code).I have a Arduino nano in which I can test it after buying WS2812 which i don't have yet.

$50 AUD in 7 dage
(7 bedømmelser)
3.3
(5 bedømmelser)
3.2
nehasingh17

Hi , I have working experince in Embeddded and I have worked with numreous projects realted to Arduino and different type of break out boards. I think I can be best fit for your project if you any doubts I can share so Flere

$30 AUD in 7 dage
(2 bedømmelser)
2.5
sunil904536

Hello dear sir I read your post. I can complete your project. I am embedded developer and have better experience in embedded hardware and software field. Ernd me message for more discussion Thanks

$30 AUD in 7 dage
(1 bedømmelse)
1.4
SRG200127

Hello sir I have read all your problems and I assure you that I will try best to give the exact output you want you can see my last review for the similar type of project I can do this project in half the time if you w Flere

$25 AUD in 7 dage
(1 bedømmelse)
0.4
HelpingLab

NANO 3.0 (ATMEGA328) WS2812 Driver I am an academic expert who can help you with your solutions like; Case Studies, Summaries, Reports, Thesis & Dissertations, and Online Exams and Courses in almost every language. I Flere

$10 AUD på 1 dag
(0 bedømmelser)
0.0
amirulnazman

HI I AM WRITING IN RESPON TOUR ADVERTISEMENT FOR TYPING PERSON . BASED ON SKILL REQUIRED I AM SURE THAT SUITABLE MATCH FOR THE JOB . I HAVE 7 YEARS IN TECHNICAL MANNER AND WORD CERTAIN CERTAIN YOU WILL NOT REGRET TO CH Flere

$30 AUD in 7 dage
(0 bedømmelser)
0.0
PrasadTrimukhe

Have already done many such projects with Arduino Nano board. I have myself designed a development board which has dual microcontroller with OTA functionality. Manufactured in scale and done beta testing.

$40 AUD in 7 dage
(0 bedømmelser)
0.0