I gang

XILINX FPGA + 16x2 LCD + IIC bus

Hello

I need a demo code for XILINX FPGA what will read data from IIC bus and display result on HD44780 16x2 LCD.

I have board with XILINX spartan-3 FPGA. HD44780 16x2 LCD is connected to FPGA (11 signals: D0-D7, E, R/W, RS).

IIC bus is connected to FPGA. There is 3 devices on IIC bus: 24LC32 eeprom (addres 1010000), MAX6625 temperature sensor (addres 1001000), PCF8583 real time clock (addres 1010001).

This design will be used for testing purpose only.

It doesn't matter how it will be build VHDL/verilog or schematics, standalone code or microblaze.

It should only be able to read data from IIC devices and display it on LCD.

For example when board is powered on, then temperature is displayed, after 5 seconds time and date is displayed, after 5 seconds first 32 bytes from EEPROM displayed. There is no need to build interface for setting up time and date or edit eeprom (of course you can do it, if you want, but it is not important).

There is also 5 buttons, 4 LEDS and one rotary encoder on the board. They can be used to control/indicate mode switching manually (clock,temp or eeprom).

Design should fit in the xc3s200 FPGA. Oscillator is 100Mhz. I will assign FPGA pins by myself (make UCF template), I can also send schematics, if needed. Buttons have pull up resistors ("0" when pressed). LEDs are connected with cathodes to GND (Lit when "1"). It is not important to use LEDs and buttons in this project (optional). No need of high skill, need workable solution.

Project is not time critical.

Færdigheder: Elektronik, Verilog / VHDL

Se mere: verilog lcd, 16x2 lcd vhdl code, lcd verilog, lcd 16x2 verilog, vhdl lcd, lcd vhdl, xilinx iic, lcd verilog code fpga, lcd 16x2 vhdl code, 16x2 lcd fpga, lcd 16x2 vhdl, fpga lcd vhdl, vhdl lcd display 16x2, fpga eeprom verilog, eeprom vhdl, fpga 16x2 lcd, verilog 16x2 lcd, lcd interface verilog, 16x2 vhdl, vhdl code xilinx lcd, verilog code lcd, xilinx lcd vhdl, xilinx lcd example vhdl, fpga lcd verilog, verilog lcd display example

Om arbejdsgiveren:
( 0 bedømmelser ) Parnu, Estonia

Projekt-ID: #4066247

Tildelt til:

kksrajan2

i am very good in verilog.

$40 USD in 2 dage
(0 bedømmelser)
0.0
botondkireivw

Hello! I can deliver the solution for you in 5 working days. I will use open sourse IP for the I2C and LCD controllers, in order to meet the project requirements and the budget. Regards, Botond

$60 USD in 5 dage
(15 bedømmelser)
4.6

18 freelancere byder i gennemsnit $119 for dette job

ahmedmohamed85

Dear sir, I have more than 5 years experiance in FPGA programming

$150 USD på 1 dag
(21 bedømmelser)
5.5
MikroStar

hi, i can help.

$650 USD in 12 dage
(20 bedømmelser)
5.4
Tauseef240

Hi, I am MSC in VLSI design and can do this work.

$100 USD in 2 dage
(9 bedømmelser)
4.3
jaymanvar

I can help you.

$100 USD in 30 dage
(1 bedømmelse)
2.7
iZoneFreelancer

Hi, I can do this for you. Good experience with VHDL/Verilog and IIC. HIGH QUALITY result guaranteed.

$90 USD in 2 dage
(2 bedømmelser)
2.6
bojankoce

Hi there, I have a few years experience with FPGA and VHDL. I also have my own Altera DE2 board so I could try the code implementation. To prove you my FPGA experience I invite you to visit my web page: http://leda.elf Mere

$150 USD in 7 dage
(1 bedømmelse)
1.3
Expert321

Hi I have extensive experience on Xilinx FPGA's .contact me for quality work

$100 USD in 3 dage
(0 bedømmelser)
0.0
khanhln

Hi, I'm ready to help you now. Please check your PMB, thanks

$60 USD in 3 dage
(0 bedømmelser)
0.0
nisssal

Hello, I'll can do this job for you :)

$50 USD in 10 dage
(0 bedømmelser)
0.0
nelson831002

Professional engineer at you service.

$80 USD in 5 dage
(0 bedømmelser)
0.0
ashokkumaram

I can able to do this

$60 USD in 5 dage
(0 bedømmelser)
0.0
nklancer

Dear vladeg, I am having good knowledge in FPGA design and implementation. Kindly consider me to do this work. Thanking you vladeg,

$50 USD in 5 dage
(0 bedømmelser)
0.0
BeyondElectric

I am new to freelancer.com, but I have 10+ years of experience with FPGA/CPLD design. I am very familiar with IIC interface and I had completed several projects that utilized IIC interface (both as master and slave). I Mere

$100 USD in 2 dage
(0 bedømmelser)
0.0
sbussier

Hi, I can do it spare time. This will be easy for me since I'm working all days with VHDL and have a lot of experience on hardware too. Just give me eval board part number and can build the complete project for you i Mere

$180 USD in 20 dage
(0 bedømmelser)
0.0
jetblue85

Hi, I am an experienced VHL/Verilog programmer and I worked with Spartan3 & Spartan6 FPGAs and IIC/I2C bus.

$50 USD in 2 dage
(0 bedømmelser)
0.0
kamarn

See private message

$80 USD in 5 dage
(0 bedømmelser)
0.0