Lukket

SERDES part selection and Interface Design

Project is to do a part selection and design of a circuit based on the following:

[url removed, login to view]

[url removed, login to view]

This project deliverables are the following:

- Perform a parts search for the optimum part similar to described in the Maxim link to connect to eight AD7984 ADCs and deliver a list of all manufacturers searched

- Deliver a schematic of the circuit design for the serdes part chosen describing all parts described in the SERDES data sheet and app notes

- A SPI bus to connect to a microcontroller on the ADC board must also be included with all signals flowing through the SERDES

Requirements:

- This will involve only the digital signals on the ADC

- The SERDES part must be chosen based on the following priorities:

* Operating power consumption (not standby) - target is below 20 mA total for both directions on the ADC side of the interface

* Jitter and skew on the CNV signal

* Size

* Cost

- A design for all pins of the SERDES part based on data sheet and app notes

- The schematic may be hand sketched or captured by any program but must be delivered in a pdf file

- The microcontroller will be a slave on the four signal SPI bus

- An extensive search must be performed to find the optimum SERDES device based on the requirements, do not use the first part that sounds good

Your bid must include a statement your availability date/time and the time you think it will take to finish. Please include a brief summary of your qualifications.

Færdigheder: Elektrisk Ingeniørarbejde, Elektronik, Microcontroller

Se mere: microcontroller serdes, serdes part, serdes microcontroller, static interface, design statement, app design cost, adc based serdes, signals, selection, schematic design, pins and, parts design, part, optimum time, microcontroller design, microcontroller circuit design, manufacturers list, interface design, interface app, ic design, find manufacturers, electronics design, digital design, digital circuit design, design circuit

Om arbejdsgiveren:
( 9 bedømmelser ) Salt Lake City, United States

Projekt-ID: #947673

10 freelancere byder i gennemsnit $550 for dette job

Meklaud

HI,please check your PMB!

$400 USD in 15 dage
(3 bedømmelser)
4.9
reallifetech

See details in MB.

$599 USD in 20 dage
(15 bedømmelser)
4.3
nguyendinhtuan

I can do it. Please contact me for detail your requirements. thank you.

$350 USD in 20 dage
(0 bedømmelser)
0.0
degraden

I am an Layout PCB Engineer located in Mexico with a very good experience in PCB design, shematics, Bill materials, gerber files. My refereces is products of consum and equipament audio,medical,supply power

$750 USD in 10 dage
(0 bedømmelser)
0.0
BASANAGOUDA2511

as this project suits to my knowledge and skills..i may be able to complete it in 20-25 days with a cost of $350..but i will assure you that project is little complex and can be completed with in the duration specified Mere

$350 USD in 25 dage
(0 bedømmelser)
0.0
hoffm

Hello, I'm a >20 year EE with a number of serdes and mipi designs in high volume production. I have been responsible for component selection, schematic creation, layout design, prototype evaluation, optimization, and Mere

$750 USD in 14 dage
(0 bedømmelser)
0.0
choochoo

I can deliver the design in less than 3 days. Serdes designs require careful selection of parts. My experience on this sort of design is at least more than 10 years.

$400 USD in 3 dage
(0 bedømmelser)
0.0
MikiNoel

Hello. Pls. see the PMB for details. Regards Miki

$1000 USD in 30 dage
(0 bedømmelser)
0.0
tahirfarooq46

i m expert electronics engineer

$500 USD in 5 dage
(0 bedømmelser)
0.0
vasugss

The design can be completed in 12 days time and hope all the requirements are clear. We are team of 5 people having rich experience in embedded hardware and software design. MY qualification is Master degree in Control Mere

$400 USD in 12 dage
(0 bedømmelser)
0.0