
Closed
Posted
Paid on delivery
We are an Australian structural engineering design firm and need a structural engineer who already knows the ins and outs of local residential codes and construction practices. The job centres on renovation and extension work rather than new-build design, so an ability to analyse existing load paths, identify any retrofit challenges and then integrate new steel, timber or hybrid framing into what is already there is essential. What I will supply: • Architectural concept plans in PDF/DWG • Site photos and any previous structural documents I can gather What I need from you: 1. An on-point structural design that meets the relevant Australian Standards (AS 1170, AS 1684, AS 4100, etc.) and council requirements. 2. Structural drawings and calculation package suitable for building-permit submission. 3. Two rounds of revisions after council or builder feedback, delivered promptly. Preferred workflow: You review the existing drawings, jump on a quick call if anything is unclear, then deliver a preliminary set in DWG and PDF. We fine-tune and we sign off. AutoCAD, SpaceGass or similar analysis tools are all fine by me as long as the final documents are clear, metric and ready for certification. We would like to have a lodgable package within a week of appointment. We have more work for the right candidate. Please keep your proposal short and indicate relevant Australian residential experience, especially extensions or renovations on houses built in the last 30 years.
Project ID: 40761429
29 proposals
Remote project
Active 6 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
29 freelancers are bidding on average $534 AUD for this job

With over a decade of experience as an experienced Engineer, I possess all that's needed to tackle your project head-on and ensure an impeccable outcome. I have been deeply rooted in the intricacies of Australian Structural Engineering whilst being adept at residential renovations and extensions for the past 4 years. This history enables me to effectively analyze existing structures, identify any retrofit challenges and find seamless ways to incorporate new framing that align with your architectural plans. I understand the relevance of adhering to local regulations such as AS 1170, AS 1684, AS 4100 etc and will engineer a design that surpasses their standards and is readily approved for building permits.
$266 AUD in 1 day
6.8
6.8

Hi there, This is Mohand, a structural design specialist experienced in residential extensions, renovations, load-path assessment, and steel/timber framing. I can review your architectural plans and site photos, assess existing structural conditions, and prepare structural calculations and clear DWG/PDF drawings aligned with applicable Australian Standards and council requirements. I can work toward your one-week deadline and include two revision rounds. Could you please confirm the project location, existing house framing type, and whether certification by an Australian-registered structural engineer is required? I can also share relevant previous work samples for your review. Best Regards, Mohand
$500 AUD in 5 days
5.9
5.9

Hello, I fully understand your needs, as I have previously worked on a project similar to your specifications. I am an experienced architect specializing in 3D design and rendering. I have extensive experience using AutoCAD, SketchUp, and Revit 2027, and I can deliver the required design drawings on time. I would be delighted to work on your project. I have carefully reviewed your project details. If you choose me, your project will be completed quickly and to a high standard. Thank you for your interest.
$250 AUD in 1 day
6.0
6.0

Your need for an engineer experienced in analyzing existing load paths and integrating new framing into renovations directly aligns with my recent project, where I successfully designed a complex steel extension for a heritage-listed Victorian home, navigating intricate existing timber structures and local council requirements. I understand the critical importance of seamless integration and identifying potential retrofit challenges early. My approach will involve a thorough review of your provided architectural plans and site documentation to identify existing structural elements and potential load transfer points. I will then utilize specialized structural analysis software (e.g., RISA-3D or similar, depending on project complexity) to model the existing structure and simulate the impact of proposed extensions. This will allow for precise calculation of new member sizes (steel, timber, or hybrid) and connection details, ensuring compliance with Australian residential codes (NCC, AS 1170, AS 4100, AS 1684, etc.) and detailing any necessary bracing or strengthening to the existing fabric. Given your focus on renovation, how do you typically approach the documentation of existing conditions where original plans are incomplete or unavailable? Also, what is your preferred method for client communication and design review throughout the process? I’m confident I can deliver robust, compliant designs efficiently and would welcome a brief chat to discuss your project further.
$545 AUD in 21 days
5.6
5.6

How are you? Your project matches well with my skills. Please check my profile. https://www.freelancer.com/u/lamvanduong I'll provide all drawing sets and wonderful result such as PDF, DWG(2D drawings), rendering images and BIM(3D model). I have full experience in Architectural BIM modeling, MEP design, structural design, civil engineering and drawing by using revit, Archicad, Chief architect, sketchup and cad , etc. I'll use your country building code to permit. Let's discuss more about project and start together. Best regards
$250 AUD in 2 days
5.7
5.7

Hello, I have experience preparing structural drawings and calculations for residential renovations and extensions, including existing load paths, timber framing, steel beams, and structural connections. I am familiar with Australian residential design requirements, including AS 1170, AS 1684, and AS 4100, and understand the importance of practical retrofit solutions. I will review your architectural plans and existing structural conditions, identify required modifications, and prepare coordinated structural drawings and calculations in metric units. I will target a permit-ready package within five business days, including DWG and PDF files, with two revision rounds for council or builder comments. I can also coordinate directly with your engineering team to resolve design questions and prepare the documents for certification. Thanks for reading my proposal. Edwin
$500 AUD in 5 days
5.4
5.4

Hi — house extension, not a new build: that's the work I do most. I've done plenty of these where the tricky part is tying new steel/timber into existing load paths, and your ask — AS 1170 loads, AS 1684 timber framing, AS 4100 steel, council-ready calc package — is my daily work. I'm a structural engineer (MSc Structural Engineering) leading a 15-engineer team; we've delivered 500+ projects and my Freelancer profile sits at 4.8/5 from 88 reviews. I'd go through your concept plans and site photos first, flag the retrofit load-path issues early, then deliver preliminary structural drawings and calcs in DWG and PDF — metric and certification-ready — and turn both revision rounds around quickly. A lodgable set inside your week is no problem. Daily tools: AutoCAD, Revit, ETABS, SAP2000, SAFE. If your firm handles final sign-off, I'll prep the package so it's ready for your certification — sound about right? — Nadir, MAHAR SOLUTION
$540 AUD in 5 days
5.2
5.2

Hi, We have over eleven years of experience in CAD modeling, technical drafting, and product development, with strong skills in AutoCAD and preparing precise, well-organized technical drawings. We can assist with residential renovation and extension documentation by developing clear structural drawing layouts from your supplied architectural plans, site photographs, and existing documents, with metric dimensions and editable DWG and PDF deliverables. Our focus is on accurate detailing, practical coordination of existing and proposed framing, and efficient revisions following builder feedback. Could you share the available structural documents and architectural plans for an initial review? We do not provide engineering stamps, licenses, or certification, but can support the drafting workflow and documentation under your appointed Australian structural engineer’s direction. We are ready to discuss the scope and schedule. Best Wishes
$250 AUD in 3 days
5.5
5.5

Hi, I have 10+ years of experience in structural drafting and detailing for international projects, including Australia. I can deliver clear, accurate AutoCAD structural drawings for residential renovations and extensions in DWG/PDF, coordinated with your engineer’s design and calculations. Portfolio: https://www.freelancer.com/portfolio-items/11148627-canada-building-permit-set
$1,212 AUD in 7 days
4.5
4.5

Hi there ? I have extensive experience using Revit, Chief architect, Autocad and archicad for architectural and MEP modeling, including creating detailed BIM models, floor plans, and construction documentation. I can ensure your project is accurately modeled with full parametric functionality for easy updates. I can start with an initial model draft for your review. Looking forward to collaborating! Best regards
$250 AUD in 3 days
4.1
4.1

Hi, I can support your residential renovation and extension projects with structural drafting, existing-condition coordination, and clear construction documentation. I have experience preparing residential structural drawings, including foundations, framing layouts, and renovation-related documentation. I can work from your architectural plans, site photos, and previous reports using AutoCAD, with metric detailing and revisions based on your feedback. I’m not a locally licensed Australian structural engineer, so final engineering certification must be handled by your qualified engineer. I’d be happy to review the project details and discuss how I can support your team and ongoing workload.
$300 AUD in 2 days
3.5
3.5

Hi, I can assist with structural drawings, calculations, and steel or timber framing for residential renovations and extensions. I can review your plans and coordinate the required documentation with an appropriately licensed Australian structural engineer for certification. Please share the project details and timeline so we can discuss the next steps.
$500 AUD in 7 days
2.6
2.6

I can assist with residential renovation and extension projects, focusing on existing load paths, structural assessments, and the integration of new steel, timber, or hybrid framing. With 8 years of relevant engineering and CAD experience, I can help prepare clear, coordinated structural drawings and calculation documentation using AutoCAD and structural analysis tools. Relevant Experience I understand the importance of existing-structure assessment, retrofit detailing, Australian Standards, and coordinating structural designs with architectural plans and builder requirements. Deliverables Review of architectural drawings and existing structural information Structural framing design and connection details Dimensioned structural drawings in DWG and PDF Supporting structural calculations Two rounds of revisions based on consolidated feedback Why Choose Me I focus on accurate detailing, clear communication, and timely delivery. I can work toward your one-week target, subject to project complexity and the information provided. Could you please confirm the project location, available existing structural drawings, and whether certification by an appropriately registered Australian structural engineer is required? Freelancer Profile: https://www.freelancer.pk/u/sidratulm20 Best regards, Sidra
$250 AUD in 3 days
2.4
2.4

Hi, Renovation and extension work on existing Australian houses needs careful analysis of current load paths plus clean integration of new steel, timber or hybrid framing so the package is lodgable within a week. I have designed and detailed steel and hybrid framing systems for residential-scale projects, including analysis of existing structures and retrofit solutions under strict code requirements. I will deliver: Structural design meeting AS 1170, AS 1684, AS 4100 and relevant council rules Clear structural drawings and calculation package ready for building-permit submission Two prompt rounds of revisions after council or builder feedback Preliminary set in DWG and PDF after reviewing your architectural plans and site photos, followed by fine-tuning. Please check my portfolio on my profile for previous steel and framing detailing examples. Are the architectural concept plans and any previous structural documents ready to share so we can start immediately?
$250 AUD in 7 days
2.4
2.4

Hi there, I understand you need a permit package for Australian residential renovations and extensions within a week. With over 5 years of architectural and structural drafting experience, including Australian extension documentation, I can prepare coordinated steel and timber framing drawings in AutoCAD, working from your engineer’s verified load paths, calculations and design requirements. I’ll deliver metric DWG/PDF files and include two revision rounds. Structural analysis and certification would remain with your qualified engineer. Looking forward to working with you.
$250 AUD in 3 days
2.0
2.0

Hi , I’ve carefully reviewed your project "Engineer Needed For House Extension", and I’m confident that my experience with AutoCAD, Structural Engineering and Building Regulations makes me a strong fit for this project. I have 8+ years of experience developing and completing similar projects, and I understand the importance of delivering reliable, efficient solutions. I can help you with your project from start to finish and will make sure the final result meets your requirements and expectations. I’m also happy to discuss the details, understand your specific goals, and suggest the best approach. If you’re interested, click the Chat button and send me a message. I’d be happy to discuss your project and get started. I look forward to hearing from you. Best regards, Viggo
$250 AUD in 4 days
0.0
0.0

Hi, there. Residential extensions require careful evaluation of existing load paths, framing connections, and foundation capacity to ensure safe, code-compliant structural integration. I am ready to get started on your project. I have extensive experience in residential structural engineering, including renovations, extensions, and steel/timber framing design, with familiarity with AS 1170, AS 1684, and AS 4100. **Scope of Work:** I will review the existing structure, assess load paths, and develop structural designs and calculations for the proposed extensions in accordance with applicable Australian Standards. **Deliverables:** Structural calculations, detailed DWG/PDF drawings suitable for certification review and permit submission, and two rounds of revisions. I can work toward your one-week deadline, subject to reviewing the existing plans and project complexity. Please share the architectural drawings and site location so I can confirm the scope and schedule. Best regards, Steven
$250 AUD in 7 days
0.0
0.0

Hello there! I can help review the supplied drawings, site photos, and previous structural documents to identify existing load paths, retrofit constraints, and the integration requirements for new steel, timber, or hybrid framing. My approach would focus on clear, coordinated structural documentation, metric drawings, calculations, and an organized revision process. Before confirming a one-week delivery, I would assess the project’s complexity, available information, applicable Australian Standards, and certification requirements to establish a realistic scope and timeline. I can then clarify the required deliverables and revision milestones with you. Please feel free to message me so we can discuss the project in more detail. Best regards, Damien Bartlett.
$750 AUD in 8 days
0.0
0.0

Greetings! I know Australian residential codes and construction practice well and can handle your renovation and extension work, analysing existing load paths, identifying retrofit challenges, and integrating new steel, timber, or hybrid framing into what is already there. From your architectural concept plans in PDF or DWG plus site photos and previous structural documents, I will deliver an on-point structural design to AS 1170, AS 1684, AS 4100, and council requirements, with structural drawings and a calculation package suitable for building-permit submission, plus two prompt revision rounds after council or builder feedback. I will review the existing drawings, jump on a quick call if anything is unclear, then deliver a preliminary set in DWG and PDF for fine-tuning and sign-off, using AutoCAD, SpaceGass, or similar, with clear metric documents ready for certification and a lodgable package within a week of appointment. Thanks, Revival
$250 AUD in 7 days
0.0
0.0

Melbourne, Australia
Member since Oct 11, 2026
$30-250 AUD
£250-750 GBP
$30-250 CAD
$250-750 USD
$30-250 AUD
$250-750 USD
$250-750 USD
$5000-10000 USD
$250-750 USD
$250-750 NZD
$30-250 AUD
₹75000-150000 INR
$250-750 USD
$250-750 AUD
$30-250 AUD
$750-1500 USD
$250-750 USD
$250-750 USD
$15-25 USD / hour
$250-750 USD