Lukket

Nrf24L01 Raspberry Pi Arduino

I need help to design a special wireless communication between a main device and many end devices. Each device has a “nrf24l01” radio from Nordic semiconductor. The main device is a Raspberry pi, and the end devices are Arduino nano or uno or similar ones.

The main device and end devices are close by, not too far each other. The end devices are to measure for example temperatures at their local spots. For typical applications, the end devices collect measured data and send the data to the main device, but I need something special.

I like to use have least 15 end devices now, but only one main device.

Initially, I do not want end devices to do anything without the permission from main device. So initially all the end devices are not doing any things, and their radios just listen to the main device.

The main device will send out an RF signal to all end devices every 1-2 seconds. All the end devices shall receive the signal from main device at the same time, and after each end device receive the signal from the main device, each end device will collect a measured data and send the collect measured data back to the main device. But this project is focused on the RF communication, thus each end device will NOT measure temperature. Each end device only needs to send two data back to the main device: (1) the first data is device #, so main device knows the signal is from each end device (2) the second data is "random time delay", the random time delay here means that, upon the receiving of radio from main device, the end device shall generate a random time delay in between 0-30ms, wait til the delay is completed, then each end device sends (device #) and (random time delay) altogether back to main device. This is an ongoing data communcaiton, and the main device will receive data from end devices every 1-2 seconds.

You have to figure out a solution to make sure main device do not miss the data from end devices. If there are more than 6 channels of data from end devices reaching main device at the same time, some data from end devices may be missed by the main device. Then you will have to figure out how to ask end devices to re-send the data. The re-sending of the data must be received by the main device before the main device send out the next run of radio to end devices. Please remember that main device send out a radio to all end devices every 1-2 seconds.

You must know nrf24l01 very well in order to do the project.

Færdigheder: Arduino, Raspberry Pi

Se mere: nrf24l01 raspberry pi library, nrf24 raspberry pi python, nrf24l01 raspberry pi 3, nrf24l01+ raspberry pi 2, nrf24l01 raspberry pi c++, nrf24l01 raspberry pi python, nrf24l01 raspberry pi weather station, raspberry pi nrf24, raspberry pi,arduino, arduino raspberry pi, arduino raspberry pi projects, raspberry pi interface, raspberry pi eastern european freelance programmer, raspberry pi 2, raspberry pi 2 software development nz

Om arbejdsgiveren:
( 1 bedømmelse ) PLEASANTON, United States

Projekt-ID: #14853717

25 freelancers are bidding on average $232 for this job

sagradoamicus

Hi I am an experienced embedded system developer with more than 8 years of experience . I have designed a number of systems based on arduino and Rpi Relevant Skills and Experience Please review my profile to see the f Mere

$200 USD in 3 dage
(79 bedømmelser)
6.8
Anthony989

Hello, I am Anthony from Sri Lanka and I am a FULL time freelancer. So this is basically my job and I dont mess with it. I have multiple degrees in Electronic and Mechanical Engineering. Relevant Skills Mere

$155 USD in 3 dage
(12 bedømmelser)
5.6
gold2star

Hello sir, how are you? I am an Electrical Engineer with the areas of expertise in Microcontroller,Embedded System,PCB design and layout and firmware development for systems. I believe that my experience and skill in Mere

$155 USD in 3 dage
(7 bedømmelser)
5.0
TopTower22

[url removed, login to view] [url removed, login to view] [url removed, login to view] [url removed, login to view] Mere

$155 USD in 3 dage
(3 bedømmelser)
5.2
anhvu100

BLE will never work! I'll implement this using WiFi between Raspberry pi3 and ESP8266. Need to discuss more about the communication protocol and the delay time, 0-30ms is still too short. Relevant Skills and Experienc Mere

$250 USD in 10 dage
(10 bedømmelser)
4.4
gauravsharma132

Send data from end device arduino to main device rpi without any conflict by nrf24L01 Relevant Skills and Experience We have good experience with arduino and raspberry pi, worked on them literally from their inception Mere

$177 USD in 5 dage
(14 bedømmelser)
4.4
ranganathp

I can help you achieve the requirements using nrf and raspi; we can have some basic acknowledgement mechanism to solve the missing packets/data problem; Relevant Skills and Experience raspi, arduino, nrf radios Propo Mere

$1000 USD in 10 dage
(10 bedømmelser)
3.7
bogdan2451629

Hello. I had project with wireless autonomus sensors system in closer time based on NRF. And whant to save that communication (1)<->15 isnt stable and works. Relevant Skills and Experience NRF support normal comun Mere

$370 USD in 15 dage
(7 bedømmelser)
3.3
$100 USD in 3 dage
(4 bedømmelser)
2.6
abdulbasitmirza

I used nRF24L01 modules with Arduino to build a robot. It used a single channel but I think configuring multiple channels wont be difficult. Relevant Skills and Experience RF, Arduino Proposed Milestones $160 USD - t Mere

$160 USD in 7 dage
(2 bedømmelser)
2.3
vsoldatov

Hello. I have a set of nrf24l01 and several arduinos to build the prototype of the wireless network you described. I have 10 years experience in programming, 5 years on hardware. Let's discuss the details. Best reg Mere

$150 USD in 4 dage
(3 bedømmelser)
1.8
rishiajmera

Hello, Greetings! With a proven track record of successful achievements, I am pleased to present my application for your consideration as a Freelancer. Relevant Skills and Experience Please have a look at my profile a Mere

$155 USD in 3 dage
(1 bedømmelse)
1.9
Electroduino

i'm a young enginner working with an Engineering outsourcing firm founded by a group of young and talented engineers with vast spectrum of experiences and knowledge pertaining to Electronics design. Relevant Skills an Mere

$50 USD in 7 dage
(1 bedømmelse)
0.4
ankitpitroda

I have already worked on this. The code of this project or whatever the documentation required is ready with me. Relevant Skills and Experience I am a pro in Arduino, Embedded Linux Programming, RaspberryPI, Shell Scr Mere

$188 USD in 2 dage
(0 bedømmelser)
0.0
mxdos

Helle, this is a long terme project. As I am an electronic engineer I understand your need because I had a similar project in the past. Relevant Skills and Experience Not sure if a single NRF24L01 can manage all recei Mere

$555 USD in 30 dage
(0 bedømmelser)
0.0
$155 USD in 3 dage
(0 bedømmelser)
0.0
mma58e739ea5eb74

Hi I have worked with NRF24L01, Arduino as well as Raspberry-Pi. There are other better ways of spreading RF traffic instead of using "random delay". Please let me know more about the project. Relevant Skills and Expe Mere

$350 USD in 25 dage
(0 bedømmelser)
0.0
$155 USD in 3 dage
(0 bedømmelser)
0.0
adarsh1497

A proposal has not yet been provided

$275 USD in 6 dage
(0 bedømmelser)
0.0
bypIndia

hey would u like to offer me ur project i will give u according to your requirement

$110 USD in 7 dage
(0 bedømmelser)
0.0