
Closed
Posted
Paid on delivery
The hybrid Ant-Colony/Particle-Swarm path-planning module for my GPS-less multirotor is already coded; the next milestone is to refine that C++ implementation inside ArduPilot, flash it to the airframe, and fly the remaining 50 % of our validation tests. The craft uses external ranging and inertial sensors instead of GNSS or cameras, so tight software-hardware integration—and a solid grasp of Mission Planner’s logging and parameter tools—will be essential. You will start by walking through the existing source, spotting logic or timing issues that keep the algorithm from talking cleanly to the flight stack. Once the code compiles cleanly against the current ArduCopter build, you’ll load it onto the flight controller, run bench tests, then accompany (or remotely guide) the final indoor/outdoor flights needed to verify stable hover, corridor following, and obstacle-aware rerouting. Deliverables • Corrected C++ source and compiled firmware • Mission Planner parameter file and repeatable setup steps • Flight-test plan covering pre-flight checks, sensor calibration, and safety gates • Flight logs with short analysis confirming that hybrid ACO-PSO decisions are executed in real time • Concise report summarizing results and any remaining tweaks Acceptance criteria • Vehicle completes each leg of the test plan without GPS or vision aids, maintaining prescribed corridors and avoiding obstacles • Logged paths match algorithmic waypoints within the tolerances defined in the plan • No hard faults, watchdog resets, or unexplained mode changes during flights Deep knowledge of ArduPilot internals, Mission Planner, hybrid ACO-PSO theory, and hands-on drone testing is non-negotiable, and I need someone comfortable writing and debugging code directly—rather than leaning entirely on generative tools. If you can pick up the existing work and get us through the final flights, let’s talk timelines and access to the hardware. Should finish the drone test properly along with me
Project ID: 40785693
56 proposals
Remote project
Active 3 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
56 freelancers are bidding on average $217 USD for this job

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience with C++ firmware, real-time control, and sensor integration. I can help refine your hybrid ACO-PSO module inside ArduPilot and work alongside you through the remaining GPS-less flight tests. I will review and debug the existing C++ directly, focusing on planner logic, execution timing, and communication with the flight stack. After compiling and checking the firmware on the bench, I can remotely guide staged hover, corridor-following, and obstacle-rerouting tests, using Mission Planner logs to trace planning decisions through to vehicle motion. I will deliver the corrected source and firmware, parameter file and repeatable setup instructions, a test plan covering calibration and safety gates, and flight logs with a concise analysis and results report. I will also check waypoint tracking against agreed tolerances and investigate any faults, resets, or unexpected mode changes. Which flight controller and ranging sensors are installed, and which tests remain incomplete? My 14-day estimate assumes access to the source, working hardware, and your availability to operate the aircraft during guided testing. Please contact me to discuss details.
$250 USD in 14 days
7.6
7.6

The key risk is not whether the ACO-PSO planner produces a path, but whether ArduCopter accepts and follows its setpoints on schedule using a consistent GPS-less position estimate. I’d start by tracing the planner-to-flight-stack interface, sensor timestamps, coordinate frames and scheduler load, then fix the integration and build against your current ArduCopter branch. Before flight, I’d verify the ranging and inertial inputs, EKF configuration, mode transitions and failsafes on the bench. The flight plan would then progress through gated hover, corridor and obstacle-rerouting tests, with an agreed abort procedure for each stage. Mission Planner logs should capture planner waypoints, estimated position, control response and execution timing in the same reference frame; that makes it possible to check your corridor tolerances and prove decisions were executed, rather than merely computed. I can deliver the corrected source, firmware, parameter file, reproducible setup, annotated logs and a concise results report. To plan the remaining flights together, please share the ArduPilot branch, flight-controller and sensor models, existing logs, completed test results, and whether hardware access will be on-site or remote.
$200 USD in 10 days
7.1
7.1

Hi, I can help refine your C++ ACO-PSO path-planning module in ArduPilot, resolve integration issues, configure Mission Planner, and validate the firmware through structured bench and flight testing. I'll work closely with you to complete the remaining drone tests safely, analyze flight logs, optimize real-time navigation, and deliver fully documented code, firmware, and test results. Ready to start immediately!
$221 USD in 1 day
6.0
6.0

Hello, I went through the job and the stuck point is not the math on paper. The route picker is already coded. What is left is making it play nice with the flight computer, then flying the rest of the checks with no GPS and no camera to lean on. I open the C++ and follow one decision from the sensors to the motors. That usually shows the real bugs. A number that arrive late, a lane the code thinks is wider than the room, or a reroute that fires after the copter already commited to the old line. I fix those and build on the ArduCopter you fly today, so we are not chasing ghosts. Bench comes first. Hover, a straight lane, then a obstacle that forces a new path. If the bench is shaky we stay inside. Flight days I can stand with you or guide you remote. The plan is wrote in plain words. Checks before arming, how we know the range sensors is steady, and when we land instead of pushing luck. Logs get a short note anyone can skim. Did the path stay near the planner points, did the lane hold, and was there any fault, reset, or surprise mode change. You get cleaned source, firmware that flash clean, a parameter file with setup steps, the test plan, the logs with that note, and a short report of leftover tweaks. Seven days works if I get the code early and we can fly a couple days.
$250 USD in 7 days
5.0
5.0

Hi there, I see you're looking to refine the C++ implementation for the hybrid ACO-PSO path-planning module within ArduPilot. It’s essential to ensure tight software-hardware integration with the external sensors, so my first step would involve thoroughly reviewing the existing code to identify any logic or timing issues impacting communication with the flight stack. Once the algorithm compiles against the current ArduCopter build, I can efficiently load it onto the flight controller and guide you through the testing phases, including bench tests and the crucial indoor/outdoor flights. I will ensure we maintain the prescribed corridors and avoid obstacles, and will provide a concise report summarizing the results as well as any further tweaks needed. Looking forward to discussing access to the hardware and timelines.
$200 USD in 1 day
4.6
4.6

Hi, Adelman here from Texas ARDUPILOT ACO-PSO PATH-PLANNING VALIDATION - you need the existing algorithm integrated with the flight stack and verified without GPS or vision. I’d start by tracing the C++ decision loop, sensor timing, and ArduCopter interfaces, then validate compilation and behavior in simulation before any flight. I’d use Mission Planner logs to check waypoint tracking, obstacle rerouting, and timing faults, with clear safety gates before live testing. Which ArduCopter version, flight controller, and simulation results are available, and which validation tests are still failing? Looking forward to work with you.
$225 USD in 7 days
4.3
4.3

Hello, The most likely risk is timing and scheduling between the hybrid ACO-PSO loop and the ArduCopter control thread causing stale waypoint outputs or missed actuator updates under the ArduPilot scheduler. I will first look for blocking calls, non-deterministic timers, and any use of floating point heavy operations inside the high-rate control path that could upset attitude/position loops when GPS and vision are absent. I have implemented and integrated C++ path-planning modules into flight stacks and completed indoor/outdoor test campaigns using external ranging and IMU-only navigation on multirotors. In past projects I corrected logic race conditions, compiled custom firmware against upstream ArduCopter, produced Mission Planner parameter files, and delivered flight logs with post-flight analysis. I am comfortable with Mission Planner tools, log inspection, and matching logged paths to algorithmic waypoints under GPS-less conditions. I will begin by reviewing the existing source in-place, run a static analysis and build against the current ArduCopter branch, and instrument the code with lightweight telemetry markers. After bench tests with hardware-in-the-loop and SITL where applicable, I will aid the indoor/outdoor flights and collect full logs for analysis. My first actionable change will be adding deterministic timing and a thread-safe waypoint queue to separate planner output from the control loop. - Do you have the current ArduCopter branch name and the flight controller hardware model I should target? - Are range sensor drivers already integrated into your build, and can I access the repo and a recent flight log before I start? Feel free to reach out if you want to talk through next steps. @melopgabriel
$200 USD in 2 days
4.4
4.4

Hello, "Validate the existing planner against ArduPilot before any flight" - isolate integration faults, timing issues, and unsafe path decisions in the GPS-denied ACO-PSO module. I'll begin with a source and build review, tracing how the C++ planner exchanges waypoints and sensor data with the flight stack. I'll check execution timing, state transitions, sensor assumptions, and log visibility, then propose a staged bench-validation plan with explicit abort criteria. My background includes software development, algorithms, and applied mathematics, but I do not have verified hands-on ArduPilot flight-test experience, so I cannot honestly promise to flash the aircraft or lead the final flights. I can take on a clearly bounded code-review and debugging phase first. Can you share the current ArduPilot version, flight-controller hardware, and the exact build or runtime failure? Regards, Artur Gizycki
$200 USD in 3 days
3.9
3.9

Hi, For the GPS-less position hold, are you feeding the external range and inertial data into ArduPilot through EKF3 external nav, or through a custom estimator in your module? That's usually where the timing issues hide, since late or jittery position updates make the craft drift even when the path planner is correct. Working inside ArduPilot's C++ with EKF tuning, custom modules, and Mission Planner log analysis is work I've done, including bench and flight testing multirotors. The existing ACO-PSO module gets a careful review for logic and timing problems where it hands waypoints to the flight stack, then a clean build against your current ArduCopter version. After bench tests and safety gates, I'll guide the indoor and outdoor flights for stable hover, corridor following, and obstacle rerouting. You'll get corrected source and firmware, a parameter file with setup steps, a full flight-test plan, and log analysis confirming the decisions run in real time. Budget : $250 Timeline : 9 days Which flight controller and external sensors are you running, and will testing be hands-on or remotely guided with your team flying?
$225 USD in 9 days
3.4
3.4

I am a perfect fit for your project. I can refine your C++ hybrid ACO-PSO code within ArduPilot and validate it on your GPS-less multirotor to ensure seamless functionality and reliable corridor navigation. My background includes embedded robotics, ArduPilot firmware debugging, and Mission Planner integration. While I am new to Freelancer, I have strong experience and have delivered similar solutions outside the platform. I offer a free consultation to review your setup and determine the best technical approach. I would love to chat more about your project! Regards, Sonny Dube
$225 USD in 7 days
3.3
3.3

Hello, I have reviewed your ArduPilot hybrid ACO-PSO path-planning project. However, I must be transparent: I am a software engineer with 5+ years of experience, but I do not have hands-on ArduPilot firmware development or physical drone flight-testing experience, which you state is non-negotiable. What I can offer instead: I can source and coordinate a specialist from my network who has deep ArduPilot internals experience, Mission Planner proficiency, hybrid ACO-PSO knowledge, and hands-on drone testing capability. I will manage the engagement—ensuring they review and debug your existing C++ implementation, compile against the current ArduCopter build, run bench tests, guide the final indoor/outdoor flights, and deliver the corrected source, firmware, parameter file, flight-test plan, logs with analysis, and final report meeting your acceptance criteria. You work with one point of contact while getting a specialist who can pick up the existing work and finish the validation flights with you. Let me know if this works. Noor ul Amin
$220 USD in 9 days
3.5
3.5

Hello. "PLANT MARKETPLACE WITH MYSQL PRODUCT AND USER MANAGEMENT" - Plantify Official needs a simple, responsive shopping experience with reliable product data and easy administration. I'd use Java with MySQL, keeping the code modular and beginner-friendly. The core build would cover plant browsing and search, categories, product details, user login, transaction records, and an admin dashboard, with source code, database scripts, setup instructions, and basic documentation included. Should the first version support online payments, or only record orders for admin management? Looking forward to working with you.
$225 USD in 7 days
3.2
3.2

Hello There! I’d be happy to work with you to bring your existing GPS-less drone path-planning module through debugging, integration, and structured validation alongside you. Here’s my approach: I’ll review the C++ implementation, identify integration and timing issues, and help establish a repeatable build-and-bench-test workflow. We’ll then validate sensor inputs, Mission Planner parameters, failsafes, and logged path decisions before progressing through carefully gated flight tests. I’ll prioritize safe testing, clear log analysis, and documented results without rushing the aircraft into flight. My skills in C++, debugging, embedded systems, and software testing can support the integration and validation workflow. I have few questions: 1. Which ArduCopter version and flight controller are you using? 2. Can you share the current source code, sensor specifications, and existing test logs? 3. What indoor/outdoor safety setup and flight-test access are available? I’m ready to collaborate with you on a structured validation plan and discuss the next steps. Looking forward to hearing from you. Best Regards, Touhidul Islam
$200 USD in 3 days
3.3
3.3

Hello, I’m interested in working with you to bring the existing GPS-independent multirotor project through its remaining validation stages. I understand that the goal is to refine your existing C++ ACO-PSO implementation, integrate it reliably with ArduPilot, and validate the results together—not rebuild the algorithm from scratch. Planned deliverables: Reviewed and corrected C++ source code Compiled firmware and repeatable build instructions Mission Planner parameter configuration and setup guide Staged test plan covering sensor calibration, bench validation, and flight safety gates Flight logs and analysis of waypoint tracking, timing, and obstacle-aware rerouting Final report documenting results, limitations, and remaining work I would prioritize hardware-in-the-loop or bench validation where available, independent safety controls, and conservative flight envelopes before attempting autonomous corridor following. Testing would progress only when the previous safety checks pass. A few questions: Which ArduCopter and ArduPilot versions, flight controller, and sensor models are you using? Is the ACO-PSO module integrated as a custom flight-stack modification, Lua script, or companion-computer component? Can you share the source code, build logs, current test plan, and available bench-testing setup? Best regards
$220 USD in 4 days
3.3
3.3

Hi, We can refine your hybrid ACO-PSO path-planning firmware, integrate it cleanly with ArduPilot, and get a clean compile and run against current ArduCopter. We’ll set up robust bench tests with Mission Planner logging and parameters, then iterate from the logs before any flights. Thorough bench testing and log-led debugging prevent most in-flight surprises. Will you provide physical access to the airframe and flight controller, or is remote guidance required? WhmDesign LLC
$250 USD in 7 days
3.3
3.3

Hi Dear. This is Persia Michael. I can do your project well and produce the results you want. Coz I recently integrated a custom C++ path-planning algorithm into an ArduPilot firmware build. I debugged timing and logic issues between the module and the flight stack, compiled the firmware cleanly, and ran bench tests on the hardware. I then executed the flight tests, tuning parameters in Mission Planner and analyzing logs to confirm stable hover, corridor following, and obstacle rerouting without GNSS. Here is how I will complete your project. First, I will review your existing hybrid ACO-PSO source to spot the logic or timing issues preventing clean communication with the flight stack. Then, I will correct the C++ code, compile it against the current ArduCopter build, and flash it to your airframe. I will create the Mission Planner parameter file and a flight-test plan with sensor calibration and safety gates. Finally, I will run the bench tests and final flights, deliver the logs with analysis, and report the results and any remaining tweaks. You can be confident the project will succeed. I am comfortable writing and debugging code directly and working alongside you to complete the drone testing properly. Once the project is complete, I’ll walk you through the changes and confirm everything is working as expected. If this approach works for you, I’d be happy to discuss the details further. Thanks, Persia Michael.
$200 USD in 1 day
3.3
3.3

My C++ and software-development background makes me well suited to inspect and refine the existing hybrid ACO-PSO implementation at source level, with a focus on clean integration and reliable handover rather than relying entirely on generated code. I also work on rescuing half-finished projects, debugging existing systems, and delivering clean, commented code with practical setup documentation. Your project needs careful ownership of the current implementation: correcting C++ logic where required, producing a reproducible build and configuration handover, and documenting the remaining validation work clearly. My skills in C++, C, software architecture, and software development support the code-review and integration side, while my structured milestone-based working style keeps testing evidence, fixes, and remaining issues visible. I should be transparent that my profile does not show specific ArduPilot, Mission Planner, ACO-PSO, or hands-on flight-testing experience. If those specialised requirements are mandatory from day one, I may not be the right choice; if you need a disciplined C++ developer to take ownership of the existing code and deliver a usable technical handover, I would be glad to discuss the project.
$225 USD in 7 days
2.9
2.9

My strength is software architecture: I can review an existing codebase, identify integration and timing problems, and turn fragmented logic into a clean, maintainable implementation. That foundation is relevant to refining your coded hybrid ACO-PSO module inside ArduPilot and ensuring its components communicate reliably with the flight stack. I would be glad to work alongside you to bring the remaining drone validation through a careful, technically documented finish.
$200 USD in 3 days
2.5
2.5

Hi, I can help review your existing python ACO-PSO path-planning implementation, investigate integration issues within ArduCopter, and work toward reliable, repeatable validation. I’ll begin by examining the algorithm, flight-stack interfaces, sensor data flow, timing, and existing logs. Then I’ll address identified issues, verify compilation against your target ArduPilot build, and establish bench-testing and Mission Planner validation procedures before any flight testing. I’ll focus on GPS-denied navigation, sensor integration, corridor following, obstacle-aware rerouting, and log analysis, with staged safety checks before progressing to flight tests. Deliverables can include corrected source code, firmware, parameter files, setup instructions, a test plan, and a concise validation report. Flight testing will proceed only when the hardware, environment, and safety conditions are suitable. A few questions to understand the current status: Which ArduPilot and ArduCopter versions and flight controller hardware are you using? Which external ranging and inertial sensors are integrated, and how are they connected to the flight stack? Can you share the current source code, recent Mission Planner logs, and the remaining validation test plan? I’d be happy to review the existing implementation with you, agree on milestones, and plan the remaining tests together. Best regards, VDinfotech
$225 USD in 7 days
2.4
2.4

Hi there, The hard part is ensuring the hybrid Ant-Colony/Particle-Swarm algorithm integrates smoothly with the ArduPilot framework. Identifying and resolving any timing or logic issues in the existing C++ code will be crucial for achieving reliable communication with the flight stack. I can assist with compiling the code against the current ArduCopter build and managing the subsequent bench tests. To ensure a successful flight test, could you clarify any specific parameters or constraints you have in mind for the safety gates during the final flights? Looking forward to discussing the details in chat.
$225 USD in 7 days
2.0
2.0

Kuala Lumpur, Malaysia
Payment method verified
Member since Oct 25, 2026
$200-250 USD
₹1500-12500 INR
$200-250 USD
$30-250 USD
₹750-1250 INR / hour
₹1500-12500 INR
$250-750 USD
₹1000-10000 INR
₹1500-12500 INR
$45-65 USD / hour
₹12500-37500 INR
£750-1500 GBP
$750-1500 USD
$250-750 USD
₹1500-12500 INR
$1500-3000 AUD
$750-1500 CAD
€12-18 EUR / hour
₹1500-12500 INR
$250-750 USD
₹1500-12500 INR