Technical drawings pantsJobs

Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    10,980 technical drawings pants jobs fundet, i prisklassen EUR

    I have a list of architectural project sheets in a complete drawing set and a list of specification section from the project manual. The sheet names, date, spec sections and description, etc need to get populated into the word form. The entries in the form are just examples, and should be deleted, so the form is filled with only the sheets and specs from the pdfs. Drawing sheets should be listed ...

    €20 (Avg Bid)
    €20 Gns Bud
    19 bud

    Will need to be stamped and approved for permitting in county of San Bernardino California, will be RV storage for a 45foot RV, with an attached 800sqft living quarters. I prefer contemporary/industrial designs, so I've attached some of the looks I like, this home will be built in a high desert so I would like it to fit in geographically.

    €233 (Avg Bid)
    €233 Gns Bud
    5 bud

    Need someone experienced to work with the project. I want someone who can work with 2D Vectors on Android app and with 3D on web. That is 2D drawings which will be made in android studio related to floor plans and later on exported and displayed only on the web in 3D. For More Information contact.

    €346 (Avg Bid)
    €346 Gns Bud
    4 bud

    This is not rendering gig!!! We manufacture and supp...review the architectural plans, measure from elevations and match our company's products based on the shop drawings we provided. This is a part-time to full time job. We will be paying per set of drawings. AutoCad and architectural drawings navigational knowledge with 3 years experience must.

    €10 / hr (Avg Bid)
    €10 / hr Gns Bud
    31 bud

    ...freelancer who would be in a position to prepare hand made (not computer made) 18 drawings (illustrations) for a book on personal finanse management aimed at males/females age 18-25. Each illustration should match each chapter title (there are 18 chapters hence 18 drawings are needed). We need files in ai, tiff or eps file format. Each illustration in

    €529 (Avg Bid)
    €529 Gns Bud
    68 bud

    Make 3 floorplans for porch (birdview, front and sideview) and the same drawings in autocad You must look at the attached file to read the project. Notice that the measurements are not finalized and you will need to change some of the measurements later. I will pay you USD 40.

    €84 (Avg Bid)
    €84 Gns Bud
    26 bud

    I need two drawings "cleaned up" with an eraser tool and something added to one of the drawings. $10 fixed price.

    €11 (Avg Bid)
    €11 Gns Bud
    35 bud

    Would you be interested in creating shop drawings for us? This time we would need roof shop drawings for an SBS system. We have the DWG files and we just need to adjust them to our standards. Please let me know if you are interested. Then I'll send you the documents.

    €122 (Avg Bid)
    €122 Gns Bud
    64 bud

    I need a logo desig...business card. For a logo and a business card for my company, and a logo for my brand. My business is about fashion. My company sell men clothes, men's formal suits,jackets,pants etc. My company logo should represent confidence,royalty,prestige, strength and passion. My brand logo should represent luxury,wealth,elegance,prestige.

    €57 (Avg Bid)
    €57 Gns Bud
    109 bud

    A client has selected some bespoke furniture which we need 1 plan (from above) and elevation (front and side) for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can re-scale them our end once the dims

    €137 (Avg Bid)
    €137 Gns Bud
    18 bud

    A client has selected some bespoke furniture which we need plans and elevations for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can rescale them our end once the dims have been confirmed. The proportions

    €144 (Avg Bid)
    €144 Gns Bud
    19 bud
    CAD Drawings (House Elevations) 5 dage left
    VERIFICERET

    Would you be able to start drafting up some elevations of the outside front and rear elevations for me based on the photos.

    €19 (Avg Bid)
    €19 Gns Bud
    37 bud

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets

    €8 / hr (Avg Bid)
    €8 / hr Gns Bud
    37 bud
    Photography of Digital LED Screens 5 dage left
    VERIFICERET

    Need a photographer to get approximately 20 high quality images from multiple angles for two General Pants store locations 1) George Street General Pants 2) Elizabeth Street General Pants These sites have large format LED screens at the entrance of which photos are required. Format: .png, uncompressed .jpg or RAW (.cr2) is acceptable.

    €94 (Avg Bid)
    Lokal
    €94 Gns Bud
    3 bud
    patent drawings 5 dage left
    VERIFICERET

    I have 2D vector CAD drawings that need to be cleaned up and prepared for patent drawings. approximately 10 drawings plus 1 drawing made from a photo. only people with prior design patent drawings or design patent illustration knowledge.

    €123 (Avg Bid)
    €123 Gns Bud
    15 bud
    AutoCad drawings 5 dage left

    I am studying the 3 main Pyramids of Giza and hope to write a book about them. I firstly want 2D AutoCAD drawings that highlight key dimensions. I have these for the Khufu (Cheops) Pyramid on a XL Spreadsheet. I want to highlight the inherent geometrical patterns by using different colored lines but this involves a large area outside the structure also

    €11 / hr (Avg Bid)
    €11 / hr Gns Bud
    62 bud

    I retail sofas. I need clients to easily see what a chairs looks like, two seater, three seater etc. Line drawing, birds eye view. Rough hand drawn sketch provided.

    €7 / hr (Avg Bid)
    €7 / hr Gns Bud
    24 bud

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets

    €283 (Avg Bid)
    €283 Gns Bud
    53 bud
    CAD drawings 4 dage left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    €98 (Avg Bid)
    €98 Gns Bud
    11 bud
    Trophy icon CAD drawings 4 dage left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    €56 (Avg Bid)
    €56
    10 indlæg

    I need 10 line drawings done.. just need to outlines main lines.. line thickness 0.50mm then positioned inside a 34mm diameter circle MESSAGE ME TO START NOW

    €27 (Avg Bid)
    €27 Gns Bud
    28 bud

    We need several drawings done for an office furniture line. We currently have some done so the new ones will need to match. There are 4 colors and many configurations. We need a freelancer that has a fast turn around time and is very proficient in furniture renders. Attached are some that are already created. I will create a milestone for a freelancer

    €127 (Avg Bid)
    €127 Gns Bud
    62 bud

    ...Panel Manufacturer in Noida. We design, manufacture and commission ACDB, PLC panels. We have been in business since 2014. We are a professionally managed company with highly technical background. We takeup challanging projects and execute them to client's satisfaction. This is an ongoing work and we need a person who can be associated with us for next

    €18 (Avg Bid)
    Lokal
    €18 Gns Bud
    3 bud

    Would like a machine drawn up so we can then get all componentry laser cut. We will supply all sizes that we would like drawn and all hardware included.

    €243 (Avg Bid)
    €243 Gns Bud
    102 bud

    I need line drawings done outlines main lines ..14 total and 10 line drawings edited to make line thickness 0.50mm all drawings need to be 0.50mm in line thickness and put inside a 34mm diameter circle.. PLEASE MESSAGE ME TO START NOW need done today and tomorrow more designs every week..

    €34 (Avg Bid)
    €34 Gns Bud
    37 bud

    ...source agents in China, India, Bengladesh and Vietnam. Our business is into Fashion Wear for women. Especially Faux Leather, PU and Real leather. Such as dresses, skirts, pants, etc. At the same time we are looking for sexy swimsuits. Factory must find the best material, manufacturers,etc. Fashion wear and swimsuits designers also welcome. Good

    €236 (Avg Bid)
    €236 Gns Bud
    13 bud

    I need basic drawings that will get me by for permitting and pricing for a new campground in Walsenburg Colorado. City water runs through the site on the east side. see sketch from survey, blank survey and topographical map. On the sketch the likely location of the water line is the red line on the east side of the property (right side of image) it's

    €4686 (Avg Bid)
    €4686 Gns Bud
    32 bud

    Need 8-10 still image drawings if cartoonised characters. The drawing needs to be done in adobe illustrator and file provided in .svg format. Similar to this in the video attached. [log ind for at se URL]

    €122 (Avg Bid)
    €122 Gns Bud
    22 bud

    hi i need you to use all the photos here to create a beautifully formatted mosaic design for all around print yoga pants leggings. thanks

    €18 (Avg Bid)
    Garanteret
    €18
    10 indlæg

    Hi Valeriia, This message is regarding a 3-panel comic strip: 1) Top left panel -- The girl is on the ...long braid on her shoulder. b.) The wolverine should always wear the large square rimmed black glasses. c.) The character's are hipsters. So the girl can wear clothes like the pants in your bird girl painting. Thank you in advance for your work.

    €48 (Avg Bid)
    €48 Gns Bud
    1 bud

    Installing a boiler - feed tank - blow-down tank - water softener with heat exchangers (steam shell , water tube) to act as a split system to provide hot water to 30 wash stations for CIP and two different temperature zones (120 degree x 29 zones and 170 degree 1 zone)

    €318 (Avg Bid)
    €318 Gns Bud
    33 bud

    I need Autocad designs copied from a PDF.

    €39 (Avg Bid)
    €39 Gns Bud
    16 bud

    Have 2d drawing of a machine with 26 parts. I require a 3d model with assembly and motion simulation using catia kinematics

    €95 (Avg Bid)
    €95 Gns Bud
    49 bud

    We are an eCommerce store that sells things pertaining to women legs: pants, legging, sweat bottoms, high thigh jewelry, anklets, toe ring, stockings, creams to enhance leg appearance, leg sculpturing clothes and appliance. We want a 500-word article entitled "Why every woman should have a few pairs of leggings"

    €15 (Avg Bid)
    €15 Gns Bud
    25 bud

    Seeking animated artist to assist in project.

    €152 (Avg Bid)
    €152 Gns Bud
    9 bud

    I have a lot of old doll patterns from magazines. I would like to find someone who can reproduce the pictures in a larger size and clearer than they are. They do not have to be exactly the same as the pictures. My interest is in the clothing. If you can finish adding the legs that would be a plus. PLEASE DO NOT BID BEFORE LOOKING AT THE SAMPLES. There are 45 pictures in a batch and I will ha...

    €113 (Avg Bid)
    €113 Gns Bud
    31 bud
    Conveyor Feeder Drawings 15 timer left
    VERIFICERET

    Need schematics of parts required to create conveyor feeder. Video file of working model as well.

    €364 (Avg Bid)
    €364 Gns Bud
    52 bud

    Need an experienced doodle creator for a 90 sec video. You must have experience in creating custom drawings for doodle and some basic animation

    €171 (Avg Bid)
    €171 Gns Bud
    43 bud

    I need line drawings made . vector form . li e thickness 0.50mm . main lines / outlines only no small details . please know how to do this.. be responsive be honest do not complain argue or dissapear be responsive UNDERSTAND WE PAY $2 PER HOUR NO MORE !! message me

    €2 / hr (Avg Bid)
    €2 / hr Gns Bud
    24 bud

    Sportwar: 2 T-shirts, 3 Tanks, 1 fleece pants and 2 Shorts Each design in 4 colors

    €193 (Avg Bid)
    €193 Gns Bud
    1 bud

    I have 2 trucks and 9 bins that are currently green and need to be changed to red and current logos changed out for a multilayered logo thats usable from the internet website [log ind for at se URL] front page with butterfly top RHS. All design and AI files created already. You may need to on some hook lift bins delete some lines but nothing really hard to do. This should be a 1-2 hour quick easy...

    €46 (Avg Bid)
    €46 Gns Bud
    34 bud

    Redesign very old logo in Illustrator based upon guidelines and attached files as guide. New logo should be print and digital friendly with basic color scheme. Resulting files should include .ai. Please let me know questions and artist should be willing to make final adaptations as necessary.

    €88 (Avg Bid)
    Garanteret
    €88
    12 indlæg

    For detached double height double garage, which will have car ramp inside to store second car on each space at height, and also be able to be doubled up as car repair workshop. Site layout plan, Ground floor plan, Elevations, Cross section.

    €52 (Avg Bid)
    €52 Gns Bud
    16 bud

    We are remodeling an apartment building. Changing out vanitys, showers, floors, furnaces. Most everything was existing we are just updating. We h...everything was existing we are just updating. We have the floor plans but the local city wants an engineers stamp on them. We are looking for someone to update and stamp the drawings so we can submit them.

    €778 (Avg Bid)
    €778 Gns Bud
    15 bud

    ...subcategory Furniture Living Room Bedroom Dining Room Kitchen Bathroom Outdoor Appliances Tools Art Collectibles Apparel Womens Accessories Pants Shirts Coats Shoes Mens Accessories Pants Shirts Coats Shoes Jewelry Books Photos for each item (up to 20 per post) Item description Item/Product info Search Filter Guest Login Registered

    €210 (Avg Bid)
    €210 Gns Bud
    92 bud

    We are a currently making a proof of concept of our product which is a protective insert. We have designed a model and require 2D, aerial and segment drawings of this model for production.

    €65 (Avg Bid)
    €65 Gns Bud
    32 bud

    Create 15 unique pencil animal drawings, you can use inspiration from photos or other sites but the work must be unique and not be copyrighted. If you do a good job then there will be regular work each month. Any questions just ask, please provide a sample of your work if possible. Attached image for example purpose only.

    €27 (Avg Bid)
    €27 Gns Bud
    21 bud

    You will need to make 3d models, and 2d models and drawings to pdf. I only have pictures of the item that needs to be 3d modelled in solidworks/edge/autocad. Model is with chain drive.

    €107 (Avg Bid)
    €107 Gns Bud
    85 bud

    Unisa Eurani is a womenswear brand and all of our patterns and first samples are done in house but we're looking for sewers who can ...Samples and patterns will be provided, we're just looking for individuals who can sew the pieces efficiently and in a timely manner. The samples will range from dresses, jackets, pants, and tops. Needed by: Jan 18th

    €102 (Avg Bid)
    Lokal
    €102 Gns Bud
    1 bud