Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    3,556 stm32 usb interface jobs fundet, i prisklassen EUR

    PCIE USB 3.1 and 10 GB Ethernet card with trigger, Galvanic Isolation and drivers. 3D cad drawing a electrical simulations as part of delivery.

    €513 (Avg Bid)
    €513 Gns Bud
    5 bud

    Looking for a Linux sysadmin who have experience with serial port settings, serial communication. I want to use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need

    €17 (Avg Bid)
    €17 Gns Bud
    4 bud

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    €23 (Avg Bid)
    €23 Gns Bud
    2 bud

    Who can help me to build any tool which enables a remote connected remote usb PC to act as if, is connected to my own computer. I want to be sharing my usb software remotely.

    €26 (Avg Bid)
    €26 Gns Bud
    2 bud

    I needed a tool or software which will enable me to remotely share my usb with other remote computer(s). Example, for unlocking purposes

    €26 (Avg Bid)
    €26 Gns Bud
    3 bud

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    €45 (Avg Bid)
    €45 Gns Bud
    3 bud

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    €41 (Avg Bid)
    €41 Gns Bud
    5 bud

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    €69 (Avg Bid)
    €69 Gns Bud
    7 bud

    Hello, I am searching for a fairly skilled developer who can help me and develop a simple PoC code that: + Communicate with a modem using AT Commands over the USART2 line. (I have few libraries ready that i found specifically for BC95 - I just need to get them working) Attaching nb-iot network, check connection, check signal, send data over CoAP/UDP The MCU is specifically: STM32L0-line Modem ...

    €26 (Avg Bid)
    €26 Gns Bud
    1 bud

    There is a led on the cypres fx3 chip board. This function is to turn on the LED by pressing the button on the winform. uvc communication (1.1) version Using the extension unit command guidExtensionCode: {63610682-5070-49AB-B8CC-B3855E8D221D} By sending the extension unit command 0x0D through the above GUID, the LED control Since the maximum value is set to 9, the minimum value is set to 0, ...

    €9 - €26
    €9 - €26
    0 bud

    We have developed the hardware for an IoT product and require someone with actual STM32 experience. Ideally with LTE modems from Simcom and Quectel.

    €45 / hr (Avg Bid)
    €45 / hr Gns Bud
    41 bud

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    €13 / hr (Avg Bid)
    €13 / hr Gns Bud
    1 bud

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    €12 / hr (Avg Bid)
    €12 / hr Gns Bud
    1 bud

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    €12 / hr (Avg Bid)
    €12 / hr Gns Bud
    1 bud

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    €12 / hr (Avg Bid)
    €12 / hr Gns Bud
    1 bud

    Necesito una persona experta en el diseño de PCB y que tenga experiencia con STM32f103c8t6 y modulos SIGFOX, para hacer un proyecto de dos fases Fase1: diseñar el PCB y realizar un programa que envie algo sencillo a la nube usando sigfox, este es un prototipo inicialmente. Los detalles completos los dare por chat

    €749 (Avg Bid)
    €749 Gns Bud
    5 bud
    I need a programmer Udløbet left

    Tetris game on a STM32 led matrix using C++ and C

    €121 (Avg Bid)
    €121 Gns Bud
    7 bud

    1. Dont worry about the offer price, quote yours. 2. how much you would charge for a gps tracker pcb with stm32 and sim808 module. couple of analogs, 4 digital ins, 1 CAN, and 1 rs232, 12v to 4v dcdc converter and on Board gsm antenna? Read Less

    €7 (Avg Bid)
    €7 Gns Bud
    1 bud

    1. Dont worry about the offer price, quote yours. 2. how much you would charge for a gps tracker pcb with stm32 and sim808 module. couple of analogs, 4 digital ins, 1 CAN, and 1 rs232, 12v to 4v dcdc converter and on Board gsm antenna? Read Less

    €8 / hr (Avg Bid)
    €8 / hr Gns Bud
    1 bud

    This interface will be based on the Cypress EZ-USB chip and will be driven by a C/C++ program running on the PC. The C/C++ program will be written in modular format, with functions for each individual elementary/basic control of the devices that we want to control or monitor. Since this project will be part of a course for student training, all software

    €150 (Avg Bid)
    €150 Gns Bud
    3 bud

    ...take photos. Type of freelancer you're looking for - Never stop challenging - Can be manage the project and do the scratch development - iOS developer who has knowledge of UVC(USB video class) and OpenCV ref- [log ind for at se URL] Anything unique about the project or team - The Github and the Jira will be use

    €1103 (Avg Bid)
    €1103 Gns Bud
    39 bud

    ...PC->HDMI->FPGA->HDMI->Monitor 2) PC->USB-> FPGA 3) The PC will send information to the FPGA and create an overlay on the monitor. This software on the PC could be coded in C++ or C. Example, DrawText(x, y, "Truck #19 ready for shipment.") There are many samples online but my knowledge is too limited to combine USB communication and Drawtext or shapes

    €311 (Avg Bid)
    €311 Gns Bud
    7 bud

    ...a communication device to communicate with its connected slave device. The project is based on STM32 controller The project hardware has 2.8" touch TFT screen and RS485 communication Few group of values called as Recipe should be available in the STM32 flash area, the values should loaded to the respective register fields during power ON. The user

    €179 (Avg Bid)
    €179 Gns Bud
    3 bud

    1. Dont worry about the offer price, quote yours. 2. how much you would charge for a gps tracker pcb with stm32 and sim808 module. couple of analogs, 4 digital ins, 1 CAN, and 1 rs232, 12v to 4v dcdc converter and on Board gsm antenna?

    €70 (Avg Bid)
    €70 Gns Bud
    1 bud

    HELLO, I NEED TO ADD PRINT FEATURE via usb and bluetooth to an existing app with option on/off autoprint, number of copies i have code you can use it to generate the apk using phonegap

    €207 (Avg Bid)
    €207 Gns Bud
    12 bud

    1. way to check if there is any USB TOKEN / SMARTCARD with certification. 2. querythe device for some "string" in the description 3. send "PIN" to the device. 4. get certificate to sign document. all writen in DELPHI, can use OpenSSL or PKCS#11 pr PCSC dll or what evere needed. all must be free from any Copyright to any therd side

    €544 (Avg Bid)
    €544 Gns Bud
    3 bud

    I am looking a source code of MT7601U Wireless USB wifi adapter Windows Driver. If you can develop it or have it, please bid for me. Thanks.

    €3554 (Avg Bid)
    €3554 Gns Bud
    6 bud

    In order to use Dosbox Emulator on Android devices, we must be able setting the usb port to serial port function, thus, our DOS application will have communication with external serial devices.

    €498 (Avg Bid)
    €498 Gns Bud
    8 bud

    We are looking for USB chargers ID design,including USB Home chargers,USB Car chargers,Multi-USB charging stations with unique and compact design

    €147 (Avg Bid)
    €147 Gns Bud
    10 bud

    preciso de um desenvolvedor em ccs compiler para utilizar a biblioteca 16FUSB para criar um teclado USB HID com o pic 16F628A

    €124 (Avg Bid)
    €124 Gns Bud
    1 bud

    ...(with simple switch or similiar). The device must be connected with a computer with USB. On the computer, I have a software where I can define, at which number of device the LED should switch on. 100-200 of that device will be conncted to one computer, so I'm not sure, if USB is the best way to connect. Maybe a differnt way is much better, or a optical connection

    €1410 (Avg Bid)
    €1410 Gns Bud
    41 bud
    STM32 programming Udløbet left

    Software programming for ARM processor

    €39 / hr (Avg Bid)
    €39 / hr Gns Bud
    3 bud

    I am looking for some .Net code that will allow me to reliably send text commands directly to a USB port (not through windows print spooler).

    €346 (Avg Bid)
    €346 Gns Bud
    7 bud

    Need a pcba design; 2x canbus (tja10xx??) GPS module (offer price/performance product) GSM module (offer price/performance product) MCU (s32k or stm32 series) input power supply is 12V (6-36V is good) Offer good prices and show your references

    €755 (Avg Bid)
    €755 Gns Bud
    28 bud

    Hi. I want to build a smaller version of the fly/mosquito racket/swat and I want to have a charging by USB capability

    €194 (Avg Bid)
    €194 Gns Bud
    9 bud

    ...device built on the STM32 MCU : 1. a simple waveform generator to produce a square and a sawtooth waveforms, 2. meter which sends measured waveform parameters to the host PC over USB. The task is writing a firmware for the MCU based on STM32F4Cube HAL library and STM32CubeMX configurator. Target STM32F407VE MCU. Peripherals used: USB OTG FS port, Waveform

    €2430 (Avg Bid)
    €2430 Gns Bud
    12 bud

    This is next task for our control system based on the ARM Cortex M4 STM32 MCU. The design of the system is done including initialization, state-event transition diagram and main code template. The design is fragmented into many small relatively simple basic tasks for a freelancer to incrementally develop a firmware. System configuration has been done

    €404 (Avg Bid)
    €404 Gns Bud
    15 bud

    I need you to develop some software for me. I would like this software to be developed using C or C++. Use pic18lf45k50 to be a mass storage usb device with ability to write/append to file using SD card

    €40 (Avg Bid)
    €40 Gns Bud
    6 bud

    I need you to develop some software for me. I would like this software to be developed using C or C++. To make a pic18lf45k50 appear as a mass storage device with and sd card using mplabx and xc8. with ability to write/append to a file

    €196 (Avg Bid)
    €196 Gns Bud
    10 bud

    I have my program already now its used usb dongle to control license .And now I would like the license tool able to generate license which able to define number of users , expiredate or unlimited date , and lock my program to use only one computer was defined ( by cpu id )

    €908 (Avg Bid)
    €908 Gns Bud
    8 bud

    Posiadamy program do obsługi naszego urządzenia (kontroler STM32) napisany w Visual Studio 2010. Program w naszej ocenie wymaga optymalizacji lub napisania od nowa.

    €1051 (Avg Bid)
    €1051 Gns Bud
    7 bud

    Posiadamy program do obsługi naszego urządzenia (kontroler STM32) napisany w Visual Studio 2010. Program w naszej ocenie wymaga optymalizacji lub napisania od nowa.

    €863 (Avg Bid)
    €863 Gns Bud
    2 bud

    I have an USB hard drive which contains an encrypted Linux LUKS partition whose password I have forgotten. However, I have a list of possible passwords as a text file. One password candidate per line. There are about 100 password candidates in this file. I need you to write a script I can run in Linux that will try to open the USB hard drive, which

    €22 (Avg Bid)
    €22 Gns Bud
    1 bud

    ...from from a PC via its USB port. This device will have an I/O port (one for for 8-bit input and one for 8-bit output ). Also, apart from the I/O, I will need a few additional lines to work as CONTROL lines. The interface circuitry could be built using an ARM Cortex micro-controller, or use an available standard USB interface chips. In either case,

    €165 (Avg Bid)
    €165 Gns Bud
    32 bud

    Hello, we have designed a new QR code scanner device. For security reasons we couldn't use a normal USB socket so we redesigned it. So to install the software we need a adapter "USB to our specially designed socket". It has to be a design for manufacturing, so we can 3D print it and use it immediately. I'll send you a file after signing an NDA, how

    €1962 (Avg Bid)
    €1962 Gns Bud
    46 bud

    Need single USB 3amp ultra fast smartphone charger design with following technical specifications and features: Technical specifications and features: • output voltage: 3.6V to 12V and the maximum output current: 3A or slightly greater than that like 3.1 or 3.4 amp and this power should be 18W (Not cheaper and conventional design like output 5V/3A

    €2171 (Avg Bid)
    €2171 Gns Bud
    8 bud

    I have a program installed on my desktop and for some reason its not able to detect the usd reader. need someone that can take a look at it remotely

    €57 (Avg Bid)
    €57 Gns Bud
    1 bud

    Using IMU such as GY953, to get the device orientation data, we have integrated this module with stm32, now we need to using the data from GY953, without draft (using filter or other method) 1: the gy953 generates Gyro, acceleration data, and use filter to calculate pitch, yaw, roll data and also quanterion data 2: the data we using have drafting

    €111 (Avg Bid)
    €111 Gns Bud
    5 bud