Software uart avr pollingJobs

Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    3,607 software uart avr polling jobs fundet, i prisklassen EUR

    STM32 Simple AT Commands Sender / Response parser over UART Simple library that will send AT Command to the modem over UART and process the response from the modem. One Function that will send the supplied AT Command and process the response from the modem.

    €45 (Avg Bid)
    €45 Gns Bud
    6 bud
    Cordova Expert 5 dage left

    ...proposal so that I convince you read my description. The app runs in a local environment and polls a local server for changes /info. Depending on polling results it needes to show an alert to the user. The polling and alert need to show no matter what app is currently visible. This all seems to work fine in ios 11, but not working on ios 12. Bid on only

    €502 (Avg Bid)
    €502 Gns Bud
    17 bud

    1. Script will be long polling every one hour during 24 hours and change this duration to 15 mins between the hours set by time variable t1 and t2. Eg : t1=0500 t2= 0730. Or t1= 1330 t2=1600 . 2. In a folder location set by variable “folderpath” , When script finds a file set by variable “completionfile” , parse this file and assign values

    €136 (Avg Bid)
    €136 Gns Bud
    8 bud

    ...be using the MSP-EXP432E401Y Dev Kit( [log ind for at se URL] ) The ANSI C12.21 port will communicate over UART, while the DNP3 Port will be doing it over TCP/IP. We can give you the base project where the UART and the TCP/IP functions are already implemented and ready to send/receive data, so you can focus on the implementation of

    €401 (Avg Bid)
    €401 Gns Bud
    11 bud

    Hi Ahmed M., As discussed find below points Change Request in UART2SPI project. 1. Instead of UART now data communication is on 3 wire. a. Clock b. Data c. Valid 2. Clock is 5MHz, data is of 8bit (1 byte), data should be read only when valid pin is high. ex:- For 256 bytes transmmission, first valid pin goes high , 256 bytes transmitted on data

    €97 (Avg Bid)
    €97 Gns Bud
    1 bud

    Hello, I have a Hardware ready with GSM, Lora, and ESP32. I need Software Developer to do coding for the same. I need a candidate to be Experienced in Arduino IDE, and Bootloader to AVR controllers. Should have the Previous experience in the following thing, LORA | GSM | ESP-32 | RTC | EEPROM | MQTT in AWS. Candidate from Gurgaon or from Delhi

    €422 (Avg Bid)
    €422 Gns Bud
    17 bud

    Have create a new website got Google submission accomplished but having problems with other search engines submissions need someone to do this for me so I get it...media malware attacks. I need this done right away I also could use some follow-up work and improving my text, making my site mobile friendly, adding a comment section and polling section.

    €108 (Avg Bid)
    €108 Gns Bud
    28 bud

    ...STM32L071RBT. I need a basic structure of FreeRTOS-based code (just an "example") with the following: + Task that will be executed every 15 minutes (The task will read data from UART sensor) + MCU will go to sleep state / low-power mode and power off all the peripherals between the task execution - probably will be woken up by internal RTC. I need a highly

    €144 (Avg Bid)
    €144 Gns Bud
    8 bud

    The task is to use the DS1337 as a clock and drive 12 indiv...might be added in the future, like MAG3110 magnetometer and temperature display (from NTC). The microcontroller is ATmega328p with Arduino Pro mini bootloader. The design has UART connection to Arduino IDE, which should serve to adjust the real time clock. Schematic is in the attachment.

    €164 (Avg Bid)
    €164 Gns Bud
    20 bud
    ANDROID AOSP Udløbet left

    Build an Android app for my screen. Use of UART protocol is needed. The project is for creating a display for an Electric Motorcycle.

    €1102 (Avg Bid)
    €1102 Gns Bud
    72 bud

    ...CubeMX, HAL/LL drivers and TrueStudio toolset. I want him to build and explain following sample projects for me: 1. Push Button, LED Blink 2. ADC 3. Three Phase PWM 4. Serial UART Comm You can get these projects from anywhere like GIT or Atollic Examples or your own sample codes. Deliverable: I need approx. 30 mins of live training and explanation on

    €35 (Avg Bid)
    €35 Gns Bud
    1 bud

    The task is to design a small PCB that controls the logic to interfac...the PSU modules have been selected. Likewise the micro which would come from the PIC or AVR families. Deliverables for the project will be: • schematics • pcb artwork • BOM • source code for the firmware, along with the build instructions using the PIC/AVR design tools

    €396 (Avg Bid)
    €396 Gns Bud
    20 bud
    PBC Design Udløbet left

    ...8V) • 1x– BAT_RTC backup battery interface • 1x– 1.8V USIM • 1x– USB FS • 11x – GPIOs • 1x – 8-wire UART • 1x – Active Low POWER ON • 1x – Active Low RESET • 2x – ADC • 2x – System clock out (32.768 KHz and 26 MHz) • 1x – PCM • 1x – 4-wire UART for debug i...

    €193 (Avg Bid)
    €193 Gns Bud
    35 bud

    ...app would be post category specific Geolocation Ads - the admin user in Wordpress can create a post with a custom category which identifies it as a Geo Ad, the app will be polling for these post and store them on the device. If the user is close to the map location they get a notification. On click the notification they can go into the app and view the

    €226 (Avg Bid)
    €226 Gns Bud
    48 bud
    checking firmware Udløbet left

    ...as deviation from the usual pattern whenever a new firmware is going to be installed on a sensor. This is done also every n minutes by extracting current running firmware via UART from each sensor connected to the Gateway to make sure that current firmware sensors have not been tampered. A standard behavior is attested as a “Reference” and is used to

    €136 (Avg Bid)
    €136 Gns Bud
    4 bud
    firmware checking Udløbet left

    ...as deviation from the usual pattern whenever a new firmware is going to be installed on a sensor. This is done also every n minutes by extracting current running firmware via UART from each sensor connected to the Gateway to make sure that current firmware sensors have not been tampered. A standard behavior is attested as a “Reference” and is used to

    €139 (Avg Bid)
    €139 Gns Bud
    3 bud

    Check a UART RS485 code sometimes we have problems when we switch on the devices at same time. Michrochip 16f1939 with other microchip 16f1939. MPLAB X C8

    €205 (Avg Bid)
    €205 Gns Bud
    24 bud

    ...UI / UX Designer for Voting System An interactive voting system which user can vote for a person or anything. Web: 1) Landing page 2) Home page (Interative polls list) 3) Polling / Voting page these page must be very interactive & good looking mobile friendly... Need HTML Design & Mobile App Design idea is something like this: https://dribbble.c

    €345 (Avg Bid)
    €345 Gns Bud
    26 bud

    I need help to install AVR programmer driver on my windows 10 i have this unit. [log ind for at se URL] Problem: i try to install a but is get driver problem unknow driver for windows. i wont get help over teamveiwer

    €42 / hr (Avg Bid)
    €42 / hr Gns Bud
    4 bud

    I need simple App this connect with device with bluetooth, emulating serial port UART BLE, at 9600,8,1,n put a indicator red is disconected green is connected. Put a text input (from phone Android) Put button to send Put a text view for ouput (from device) In java Budget fixed $ 50 USD Time to delivery 2 days I need the source code

    €44 (Avg Bid)
    €44 Gns Bud
    9 bud

    ...degrees. 3. The resolution in azimuthal and elevation plane should be less than 5 degrees. 4. The AWR1243 chips have to be connected to a microcontroller that is capable of UART to USB conversion and programming should be possible through USB. The microcontroller should support other peripherals as well. 5. The PCB should be compact and less than 10cm*10cm

    €520 (Avg Bid)
    €520 Gns Bud
    14 bud

    Hi Ahmed M., Write VHDL code for frequency comparison on threshold base after the FFT_64 block in my code, the threshold will be defined by user through VIO or uart. The results should be verified on ILA in Hz. Also comment every line of code.

    €44 / hr (Avg Bid)
    €44 / hr Gns Bud
    1 bud

    Initial Milestone : Write VHDL code for frequency comparison on threshold base after the FFT_64 block in my code, the threshold will be defined by user through VIO or uart. The results should be verif on ILA

    €154 (Avg Bid)
    €154 Gns Bud
    1 bud

    ...argument: com<port number> (case unsensitive) Application core (example in attached [log ind for at se URL] & .h c++ source): The application is a loop based on windows media timer polling the serial port every milliseconds (code example attached, use of timeSetEvent api -> deprecated, to be replaced). The serial ports are opened and closed with CreateFile and

    €165 (Avg Bid)
    €165 Gns Bud
    13 bud

    Hello That I want is a basic uart communication with fifo buffer I have a small code ready At last I want a small call for explain

    €49 (Avg Bid)
    €49 Gns Bud
    4 bud

    I need simple polling app. Timeline is 2 days.

    €187 (Avg Bid)
    €187 Gns Bud
    32 bud

    Using Wordpress with Bridge Theme (if that matters). I'm looking for a means to have a random number generated polling system that keeps track of each number generated by a site visitor, when they click a button. Taking all of the numbers, I'd like them to either be averaged out into a single number after the "poll" has been closed (like showing the

    €396 (Avg Bid)
    €396 Gns Bud
    17 bud

    ...application will be shared in chat. It's a democracy app & I'd like to make a video to promote my product. It is digital democracy in which through the mobile app you can do: 1. Polling/Voting 2. Debates 3. BLOGS Please read the description and then bid for the project. My budget is very less at initial stage so kindly bid if you are flexible with the less

    €82 (Avg Bid)
    €82 Gns Bud
    10 bud

    ...application will be shared in chat. It's a democracy app & I'd like to make a video to promote my product. It is digital democracy in which through the mobile app you can do: 1. Polling/Voting 2. Debates 3. BLOGS Please read the description and then bid for the project. My budget is very less at initial stage so kindly bid if you are flexible with the less

    €95 (Avg Bid)
    €95 Gns Bud
    8 bud

    Controller Used: CC2640R2 Launchpad IDE...want you to configure the above example project to scan for any devices nearby that are broadcasting. 2. Listen to the beacons being broadcasted and dump them on the terminal (UART). 3. Documentation of how the above has been achieved including the changes made in the above code and any configurations done.

    €149 (Avg Bid)
    €149 Gns Bud
    1 bud

    ...existing software developer test my hardware workings with their specific software and use the specified functions/actions to interact with my hardware. An Android OS is installed on a Raspberry Pi 3 B+ and UART is/should be enabled under [log ind for at se URL] My hardware device has 4 x NFC readers attached (each with a LED) and works over Pi GPIO UART pins (tx

    €202 (Avg Bid)
    €202 Gns Bud
    22 bud

    we are looking for a very basic uart driver code example . The hardware is [log ind for at se URL] running on buildroot linux from NXP. Something similar to the following: [log ind for at se URL]

    €124 (Avg Bid)
    €124 Gns Bud
    7 bud

    ...line is used to send the signal to the brake light . I want to install a transmitter in the trolley and a receiver in the truck head . The receiver should give the ID on a UART at 9600 Bauds . The product should draw power from the same line and transmit the ID of the trolley back on the line . I am looking for a wired solution , wireless solution

    €436 (Avg Bid)
    €436 Gns Bud
    15 bud

    Our initial intention was to implement a delay and stuck at fault detection system for a 32-bit AVR microcontroller. Starting from a configuration involving professional J-Link EDU equipment, we would check the White-box testing algorithm for the solar tracker by placing breakpoints and watch points inside the code to monitor changes in the registries

    €327 (Avg Bid)
    €327 Gns Bud
    8 bud

    I'm looking for programers, who be able to write small bootloader in assembler language, moreo...then 512 bytes. Loader must be designed for satteliter receiver based on STI7100 microprocessor (SH4 architecture) This program have to initialize RAM memory and load from uart intereface u-boot file (I have prepared uboot for this board) and execute it.

    €132 (Avg Bid)
    €132 Gns Bud
    1 bud

    for ADE7758 i need write one paper or half contains explanation about operational inside IC chip, i will attach fu...one paper or half contains explanation about operational inside IC chip, i will attach function block diagram there are 3 or 4 operation of calculation inside IC for example AVR, VR i need clearly explanation for each on how happened

    €32 (Avg Bid)
    €32 Gns Bud
    5 bud

    ...as deviation from the usual pattern whenever a new firmware is going to be installed on a sensor. This is done also every n minutes by extracting current running firmware via UART from each sensor connected to the Gateway to make sure that current firmware sensors have not been tampered. A standard behavior is attested as a “Reference” and is used to

    €219 (Avg Bid)
    €219 Gns Bud
    1 bud
    watchdog_mega2560 Udløbet left

    I need deploy an watchdog be able retrival of the Reset Cause register (MCUSR) of the AVR. Normally, MCUSR itself is destroyed by the use of a bootloader. Currently I already deployed several watchdog sample, but after reset, my PCB don't inittialize and is required do burn bootloader again. I am using mega2560.

    €163 (Avg Bid)
    €163 Gns Bud
    5 bud

    -The application must be written in AVR assembler -Your project must include some form of user interface (using sensors and actuators from the Arduino starter kit)

    €126 (Avg Bid)
    €126 Gns Bud
    25 bud

    Hello , I ...state showing the Celsius state , when the button is pressed it will cycle between Kelvin and Fahrenheit ,coming back to the default Celsius state. The code must be written in AVR Assembler and uploaded trough Atmel Studio 7. I have an assembler file but it needs to be modified. I don't need the code converted from C or from ArduinoIDE !

    €36 (Avg Bid)
    €36 Gns Bud
    7 bud

    Hi We have installed PHP OSTICKET v1.6ST which has been modified from the normal installation some years ago so cant upgrade really, everything works except for email polling/fetching. We have the cron job set on the website which runs but nothing is ever fetched from the mailbox and no errors, something doing the original tweaks must have broken this

    €164 (Avg Bid)
    €164 Gns Bud
    7 bud

    A. WHAT WE HAVE: Present State of the Project: Our project proposes a hardware testing method oriented towards an AVR – 8 bit Microcontroller (Arduino Unit) that is involved in the automation process of a photovoltaic panel. The mixture between a traditional Bed-of-Nails tester, a Self-Testing code for GPIO (General Purpose Input Output) pins testing

    €397 (Avg Bid)
    €397 Gns Bud
    9 bud

    I want to have and LCD1602 mounted on my Arduino atMega2560 board that can show the temperature (I have th...and also a button that when it's pressed to change the temperature into kelvin and when it''s pressed again to change the temperature back to Celsius. It needs to be coded in AVR Assembler and able to run on board atMega2560 via Atmel Studio.

    €23 (Avg Bid)
    €23 Gns Bud
    19 bud

    We need ports like this 1 UART_TX UART interface P1_6 2 UART_RX UART interface P1_7 3 UART_CTS UART interface P1_4 4 UART_RTS UART interface P1_5 Speed : 115200baud Commands: AT+NAMExxxxxxxx

    €1154 (Avg Bid)
    €1154 Gns Bud
    10 bud

    Need a logo, letterhead and business card designed for my new company. Name of the company is AVR Electrical.

    €65 (Avg Bid)
    €65 Gns Bud
    67 bud

    ...someone to point me in the right direction and show me what i'm doing wrong. It shouldn't take long if you know what you're doing. It's not a difficult plugin - literally just polling a specific OID and getting that output into checkMKs graph. This is currently what I have. #!/usr/bin/python # -*- encoding: utf-8; py-indent-offset: 4 -*- # +----------

    €108 (Avg Bid)
    €108 Gns Bud
    4 bud

    We are a mobile app that is looking for someone to build the user interface for our polling platform, to clearly display the results of our polls. We have attached a PDF showing the screens that we are looking to have built. Happy to answer any questions.

    €401 (Avg Bid)
    €401 Gns Bud
    54 bud

    ...most part. The issue I am trying to resolve has to do with when the IP of the server should change and the Python code needs to detect that the IP has changed and then do the polling through the possible server IP addresses from 3 to 254. Currently, when the Python application starts, it runs the server IP finding code and connects to the server and functions

    €389 (Avg Bid)
    €389 Gns Bud
    9 bud
    Java: Polling Udløbet left

    Polling The internet and the web are enabling more people to network, join a cause, voice opinions, and so on. The presidential candidate in 2008 used the internet intensively to get out their message and raise money for their campaigns. In this exercise, you’ll write a simple polling program that allows users to rate five social-consciousness issues

    €44 (Avg Bid)
    €44 Gns Bud
    1 bud