Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Evner
Sprog
    Job-status
    6,835 simulation network jobs fundet, i prisklassen EUR

    There are two parts of this project. 1. Simulated the given paper and obtained all the given results according to paper. 2. Compare some results.

    €117 (Avg Bid)
    €117 Gns Bud
    6 bud

    Matlab simulation for a grid-tied residential solar PV system with battery Required: Matlab Simulation for a 3kW solar Photostatic (PV) system integrated with 5kWh Battery Energy System (BES) for a house in Australia (its average daily consumption is15kWh/day). - Your simulation design must be 100% same as the "Expected Simulation [log ind for at se URL]" w...

    €84 (Avg Bid)
    €84 Gns Bud
    13 bud

    the bottom rectangular bed dimension : (80 mm by 80 mm) and 20 mm height. on the top surface of the rectangular bed (means at 20 mm height) laser heat is applied in the middle of the bed but in 40 mm by 40 mm area not the whole area (80 mm by 80 mm). the laser is moving horizontally from 0 mm to 40 mm . after scan the 40 mm by 40 mm area is raised 2 mm. and again laser heat applied on that 40 m...

    €120 (Avg Bid)
    €120 Gns Bud
    8 bud
    Java simulation planning algorithm 6 dage left
    VERIFICERET

    I need a Java programmer to implement the algorithms in the planning main to [log ind for at se URL] file in the [log ind for at se URL] file provided in the attached files of the project and generate the same results included in the paper .more details are attached to this project

    €114 (Avg Bid)
    €114 Gns Bud
    17 bud

    hello I am a student in master 2 security informa...student in master 2 security information systems in fact i need help for my end of studies project that is under the theme of attack on a connected car I have to do a simulation with ns3 software using c ++ source code ,for the money I can pay 60 USD is there anyone who can help me at this point

    €190 (Avg Bid)
    €190 Gns Bud
    5 bud
    NS3 Simulation 6 dage left

    hi, I am a student in my 2nd year Master in security of information systems and i need to do a simulation in NS3 on IoT attack on a connected object in a smart home.

    €228 (Avg Bid)
    €228 Gns Bud
    6 bud

    we have set an authentication model for communication between entities in the IoT application, thus we need to simulate the model using the Omnet++ and validate the work using AVISPA , which both are relative IoT software the method described in the doc ... the yellow highlighted section (phase)

    €485 (Avg Bid)
    €485 Gns Bud
    5 bud

    I need you to simulate authentication process in IoT based on fingerprint and primary key. I would like this simulation to be carried out using omnet++.

    €26 - €221
    €26 - €221
    0 bud
    Omnet simulation 5 dage left
    VERIFICERET

    I need you to simulate authentication process in IoT based on fingerprint and primary key. I would like this simulation to be carried out using omnet++.

    €290 (Avg Bid)
    €290 Gns Bud
    3 bud

    we want to develop a new software for authentication process in IoT smart home. the experiment will be simulated using AVISPA Omnet++. all details are in attached file.

    €176 (Avg Bid)
    €176 Gns Bud
    2 bud

    To whom it may concern, DDSGroup is looking for a developer for one of its many projects, feel free to read about it down below. We would like to be able to simulate all mouse and keyboard events onto different clients on one computer. We will be running one main client (human) and 1 ~ 20 sub clients (simulated from the main client). If the main client turns the camera around its character, all ...

    €516 (Avg Bid)
    €516 Gns Bud
    12 bud

    Purpose of this project: Create a sample data set from the perspective of an autonomous car in simulation. Usually autonomous cars have lidar and camera sensors. Gazebo can simulate both of them and there is a prebuilt city, vehicles and sensors available. In order to run Gazebo in a usable way you need a _powerful_ machine. Steps: 1. Install ROS

    €109 (Avg Bid)
    €109 Gns Bud
    3 bud
    simulation using omnet++ 1 dag left
    VERIFICERET

    I need an algorithm to be developed for wireless sensor networks and be simulated with omnet++.

    €162 (Avg Bid)
    €162 Gns Bud
    8 bud

    i want to learn how to do a multipass weld on a pipe using ansys. I want to learn how to model deposition of a multipass weld on a pipe do PWHT inoder to determine ...to learn how to do a multipass weld on a pipe using ansys. I want to learn how to model deposition of a multipass weld on a pipe do PWHT inoder to determine [log ind for at se URL] simulation is 3D

    €150 (Avg Bid)
    €150 Gns Bud
    11 bud

    I need your help to complete the following tasks: 1. Read this paper and build a JSDM in FDD Massive MIMO simulation platform. 2, I need you to modularize it to achieve it, including parameter input, user grouping, user scheduling, first-level precoding, second-level precoding, calculation and rate, drawing results 3, I need you to complete it as soon

    €70 (Avg Bid)
    €70 Gns Bud
    11 bud
    MOTION GRAPHIC 1 dag left

    ...in this original video as a split screen. I need them each as a single video. The part that I need done begins at 0:11. VIDEO: [log ind for at se URL] NOTES: - Please change the colours that are used a little bit so that they are not totally identical to the originals

    €109 (Avg Bid)
    €109 Gns Bud
    10 bud

    Complete the simulation work of the paper, the indicator is the result of the recurring paper If it is done well, you can do the follow-up work.

    €116 (Avg Bid)
    €116 Gns Bud
    27 bud

    ...(PHY) UPLINK SIMULATION SHOWING EFFECTS OF INCREASE IN THE MODULATION CODING SCHEME THROUGH ANALYSIS OF BER PLOTS. I need BER plot simulations for different modulation coding schemes using Turbo coding in MIMO transmission using MATLAB. I also need a paper about this code with the topic for an academic paper. In this paper the simulation results should

    €137 (Avg Bid)
    €137 Gns Bud
    1 bud

    ...(PHY) UPLINK SIMULATION SHOWING EFFECTS OF INCREASE IN THE MODULATION CODING SCHEME THROUGH ANALYSIS OF BER PLOTS. I need BER plot simulations for different modulation coding schemes using Turbo coding in MIMO transmission using MATLAB. I also need a paper about this code with the topic for an academic paper. In this paper the simulation results should

    €78 (Avg Bid)
    €78 Gns Bud
    5 bud

    Hi, I want to simulate a DDoS attack in an SDN-based network scenario using Mininet. This is an academic project that I need for my project submission. The implementation includes an application that attacks the controller and controller mitigates those attacks using some machine learning (ML) techniques (or any other technique). There is also another

    €162 (Avg Bid)
    €162 Gns Bud
    6 bud

    ...(PHY) UPLINK SIMULATION SHOWING EFFECTS OF INCREASE IN THE MODULATION CODING SCHEME THROUGH ANALYSIS OF BER PLOTS. I need BER plot simulations for different modulation coding schemes using Turbo coding in MIMO transmission using MATLAB. I also need a paper about this code with the topic for an academic paper. In this paper the simulation results should

    €26 - €221
    €26 - €221
    0 bud

    ...(PHY) UPLINK SIMULATION SHOWING EFFECTS OF INCREASE IN THE MODULATION CODING SCHEME THROUGH ANALYSIS OF BER PLOTS. I need BER plot simulations for different modulation coding schemes using Turbo coding in MIMO transmission using MATLAB. I also need a paper about this code with the topic for an academic paper. In this paper the simulation results should

    €9 - €26
    €9 - €26
    0 bud

    LTE (PHY) UPLINK SIMULATION SHOWING EFFECTS OF INCREASE IN THE MODULATION CODING SCHEME THROUGH ANALYSIS OF BER PLOTS. I need BER plot simulations for different modulation coding schemes using Turbo coding in MIMO transmission using MATLAB. I also need a paper about this code. In this paper the simulation results should be included and explained, I

    €147 (Avg Bid)
    €147 Gns Bud
    1 bud

    Purpose of this project: Create a sample data set from the perspective of an autonomous car in simulation. Usually autonomous cars have lidar and camera sensors. Gazebo can simulate both of them and there is a prebuilt city, vehicles and sensors available. In order to run Gazebo in a usable way you need a _powerful_ machine. Steps: 1. Install ROS

    €92 (Avg Bid)
    €92 Gns Bud
    4 bud

    Looking for a programmer for running a simulation for sound propagation over a flat ground with a sand dune on it. The ground on either side of the dune has diferent acoustical properties. The dune is asymetric. The impedances on the ground and on the dune are all frequency-dependent. The problem is 2-dimensional. The calculations are to be preferably

    €124 (Avg Bid)
    €124 Gns Bud
    12 bud

    LTE (PHY) UPLINK SIMULATION SHOWING EFFECTS OF INCREASE IN THE MODULATION CODING SCHEME THROUGH ANALYSIS OF BER PLOTS.

    €128 (Avg Bid)
    €128 Gns Bud
    7 bud

    ...function of their spacing, the Power Azimuth Spectrum (PAS), the Azimuth Spread (AS) and the mean angle of arrival of the waves, for three different types of PAS. Through simulation, we need to prove that channel capacity increases as Correlation between received signals decrease, also to show that Uniform distribution have better capacity compared to

    €188 (Avg Bid)
    €188 Gns Bud
    14 bud

    ...function of their spacing, the Power Azimuth Spectrum (PAS), the Azimuth Spread (AS) and the mean angle of arrival of the waves, for three different types of PAS. Through simulation, we need to prove that channel capacity increases as Correlation between received signals decrease, also to show that Uniform distribution have better capacity compared to

    €184 (Avg Bid)
    €184 Gns Bud
    6 bud
    computer simulation Udløbet left

    Would like to get a work done around computer simulation.

    €126 (Avg Bid)
    €126 Gns Bud
    11 bud

    By Using Catia V5 A simulation of Multicylinder engine

    €16 (Avg Bid)
    €16 Gns Bud
    13 bud

    ...input voltage - Can supply up to 3 amps or more on the load - Simulation showing schematics is able to handle loads - Must use components available from any major supplier - Must use SMPS in design to keep heat dissipation low and increase efficiency Expected delivery: - Schematics - Simulation Payment terms: - 3/4 of payment on delivery of schematics

    €120 (Avg Bid)
    €120 Gns Bud
    16 bud

    i'll send you all the details

    €135 (Avg Bid)
    €135 Gns Bud
    49 bud

    Hi I need some basic simulation done on ARENA software. We have to develop the ARENA model for single server system and run the model and obtain results report. As per the results we need to estimate the performance measures. Will explain it further to interested applicants. Compensation: INR 1200 Deadline: 6 hours.

    €38 (Avg Bid)
    €38 Gns Bud
    1 bud

    need to remove heat by the water cooling jacket i have 3d design

    €57 (Avg Bid)
    €57 Gns Bud
    13 bud
    Internet of Things Udløbet left

    I want to...distributed wireless sensor network. Basically, what you need to do is to simulate 2-3 scenarios of the wireless sensor network in any freely available simulator. For example, CupCarbon ([log ind for at se URL]) that can simulate IoT WSN. You can use CupCarbon if you like. Let me know how long it would take to do such kind of simulation.

    €132 (Avg Bid)
    €132 Gns Bud
    15 bud

    Hi, I need a circuit simulation in LTSpice. The circuit is not complex. Can provide Milestones.

    €19 (Avg Bid)
    €19 Gns Bud
    17 bud

    I want to simulate a network in cloud environment its handover authentication issue with prediction based algorithm I also want to check its security against number of attacks

    €179 (Avg Bid)
    €179 Gns Bud
    11 bud

    We are a group of researchers working on the use engineering tools to understand cardiovascular disease and individual treatments for patients. we use simulation tools (for example, computational fluid dynamics) to simulate blood flow in diseased vessels, giving the clinicians we work with, haemodynamic information that might be useful to treat the

    €420 (Avg Bid)
    €420 Gns Bud
    59 bud

    need make motion of particles interacting with objects in 3ds max Particle Flow just like here [log ind for at se URL] below is attached a video of the motion of the ground, which should be obtained from the dynamic interaction of particles and the object (spacecraft, disk)

    €93 (Avg Bid)
    €93 Gns Bud
    9 bud
    TWF Simulation Udløbet left

    I would like to have a monte carlo or similar simulation run on my spreadsheet. I am currently using Excels Rand() to randomize the results of 1000 independent events. I would like to know what results can be expected within a standard deviation. The spreadsheet I am sending has only 3 outcomes for each independent event. And I have used historical

    €158 (Avg Bid)
    €158 Gns Bud
    15 bud

    So were trying to build an arcade console. The idea is to let it accept coins and notes so that players can play old arcade games with credits etc. just like in the old days. The program should have a menu where the player can select the games and see how many credits he has left. Inserting a coin/note should give him an amount of credits programmable behind. If we can get the plans on how to bu...

    €678 (Avg Bid)
    €678 Gns Bud
    3 bud

    I need help with my Simulation Related Project.

    €23 (Avg Bid)
    €23 Gns Bud
    28 bud

    ...algorithm etc across time. I will build my algorithm in C# as this later will be a part of a larger C# software suite. Your task: Create a solution that can run a EnergyPlus simulation of [log ind for at se URL] (included in EnergyPlus installation along with [log ind for at se URL] as weather file) and for each timestep

    €275 (Avg Bid)
    €275 Gns Bud
    4 bud

    A simple simulation using COMSOL CFD to evaluate the airflow speed through a Venturi

    €173 (Avg Bid)
    €173 Gns Bud
    23 bud

    I have four models to investigate convection. Flat plate and finned plate in a duct both for free and forced convection. I am u...convection. Flat plate and finned plate in a duct both for free and forced convection. I am unsure that I modelled correctly therefore I would like a solidworks expert in Flow simulation and CFD to verify them for me please

    €486 (Avg Bid)
    €486 Gns Bud
    59 bud

    Build and run a simple model in Arena for patients waiting in the hospital to get treatment from the doctor. An M/M/1 Single Queue, Single Server model comes to mind, but you are free to try more complex models, such as those where entities are fed through two or more different processes and servers, where some entities leave the system after initial processing, or where one of the queues implemen...

    €16 (Avg Bid)
    €16 Gns Bud
    1 bud

    Looking for a Pro at the CAPSTONE: Capsim Simulation. I have the attached pictures of the rounds. Can someone assist in improving. I will grant you access so you can sign in and check. you will have my user name and password Capstone Courier and my decisions attached Please tell me if you can help me with it and if you are familiar with capsim Thanks

    €165 (Avg Bid)
    €165 Gns Bud
    14 bud

    ...implement in a NetLogo simulation. Your simulation should allow for many agents to be able to service a request, while minimizing the idleness of the agents. Your simulation should show the length of the queues at a number of virtual servers and the number of requests each service agent has completed. Additionally, your simulation should show plots of

    €587 (Avg Bid)
    €587 Gns Bud
    3 bud

    A simple simulation through ansys to evaluate the wind speed through a channel

    €126 (Avg Bid)
    €126 Gns Bud
    43 bud
    abaqus simulation Udløbet left

    i want to learn how to create a dflux subroutine for A multipass 60 degree groove weld on a pipe and also do a PWHT procedure on it.

    €125 (Avg Bid)
    €125 Gns Bud
    6 bud