Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    1,534 orcad microchip jobs fundet, i prisklassen EUR

    I am a design engineer at a small company. We design and manufacture electro-mechanical systems. Mainly business to business. I have a product that uses a microchip controller that plugs into a USB port. It uses a generic windows CDC serial driver. I have a driver package with cat and inf file to assign device name. This works in windows 10, but I need to disable driver signature enforceme...

    €135 (Avg Bid)
    €135 Gns Bud
    3 bud

    Design is complete, but I want to modify the PCB layout. You have PADS software and you will open the PCB file and change a few components, then export Gerber files. If possible you can also convert to an Orcad layout file.

    €29 / hr (Avg Bid)
    €29 / hr Gns Bud
    5 bud

    We need a pic program with the option to change some timing parameter and input signal response (High or Low) using software like Visual Studio or MPLAB X IDE by Microchip, details- see document attached Please note, we only have experience uploading HEX file to PIC using QL2000 programmer and QL-Prog V2.37 software, we have not used MPLAB X compiling or editing, might some direction.

    €29 (Avg Bid)
    €29 Gns Bud
    13 bud

    I need a MATLAB simulation with Simulink. A DESIGN OF RFID TAG ANTENNA MATCHED TO MICROCHIP IMPEDANCE

    €29 (Avg Bid)
    €29 Gns Bud
    3 bud

    I am a design engineer at a small company. We design and manufacture electromechanical systems. Mainly business to business. I have a product that uses a microchip controller that plugs into a USB port. It uses a generic windows CDC serial driver. I have a driver package with cat and inf file to assign device name. This works in windows 10, but I need to disable driver signature enforcement. I wou...

    €105 (Avg Bid)
    €105 Gns Bud
    4 bud

    Hello, We are looking for an engineer / team to complete a project for us. This is a power electronics system, already developed, in its last stage before production. We need to add a new feature and correct some issues. We need to develop an accelerometer system (based on part similar to MEMS sensor LIS2HH12 from ST), correct some bugs on the PCB (high level of noise) and finalize the firmwa...

    €1133 (Avg Bid)
    €1133 Gns Bud
    36 bud

    We are making a simple, rigid PCB. Tasks: -Import/convert Orcad schematic into Altium. -Import/convert PADS PCB project into Altium. -Use Park Assist template and Git repository. -Complete layout using high-speed (1Gbps Ethernet and 2.4Gbps coax) design rules. We will provide: - DXF for PCB outline and component placement. - Altium 18 schematic template. - Part datasheets, models and other des...

    €534 (Avg Bid)
    €534 Gns Bud
    1 bud

    We are making a simple, rigid PCB. Tasks: -Import/convert Orcad schematic into Altium. -Import/convert PADS PCB project into Altium. -Use Park Assist template and Git repository. -Complete layout using high-speed (1Gbps Ethernet and 2.4Gbps coax) design rules. We will provide: - DXF for PCB outline and component placement. - Altium 18 schematic template. - Part datasheets, models and other des...

    €30 / hr (Avg Bid)
    €30 / hr Gns Bud
    34 bud

    Hello Freelancers. In this project we will have to perform some very basic simulations on the microchip PIC24FJ128GA204, via MLAB X IDE development tool and compiler XC 16. I ATTACH full description so kindly review first and let me know if interested to work on this one. Happy Biding :)

    €30 (Avg Bid)
    €30 Gns Bud
    6 bud

    Hello Freelancers. In this project we will have to perform some very basic simulations on the microchip PIC24FJ128GA204, via MLAB X IDE development tool and compiler XC 16. I ATTACH full description so kindly review first and let me know if interested to work on this one. Happy Biding :)

    €19 (Avg Bid)
    €19 Gns Bud
    4 bud

    Hello. My MCU is a ATSAMR21E16 of Microchip company. My board was already manufactured and there is only one MCU as CPU. I am going to look over the boot load method using USB port which is directly connected to the MCU. Of course, I have a main firmware and if you can deliver the code of USB bootloader, then I will combine them. Regards.

    €1299 (Avg Bid)
    €1299 Gns Bud
    8 bud

    It is necessary to develop on a microchip microcontroller, the consumption of an api in Json format with aws 4 authentication and api key through a simcom sim800 modem

    €511 (Avg Bid)
    €511 Gns Bud
    13 bud

    I have a small, quick PIC32 project that takes a short time of you to do if you are good at Pic32MX or Pic32MK.; do you have time? use Microchip Code Configurator, to prepare a project that has an interrupt at 100us intervals, and at each interval; it reads from two analog-to-digital ports and saves to two variables. Prefer Pic32MK, but if not, then Pic32MX. run the project to make sure it comp...

    €45 (Avg Bid)
    €45 Gns Bud
    1 bud

    need to design a traffic crossing system. freelancer should have good grip on circuitory and needs to have good skills on designing circuits in simulators like multisim, OrCad etc.

    €46 (Avg Bid)
    €46 Gns Bud
    8 bud

    I'm planning to start working on project, where I want to setup Lora Gateway and initially i want to connect 10 nodes, these nodes will read sensor reading and send data to Gateway later data will be stored to some cloud environment. You are required to help me building this environment. Setting up Lora Gateway Connecting Lora nodes, you will help to understand protocol and everything that w...

    €487 (Avg Bid)
    €487 Gns Bud
    15 bud

    This project is to design the electronics for a very simple vehicular LED lighting system. You will be responsible for the design and prototype assembly. The project will comprise of three parts. Transmitter: This device will attach to the vehicle through the trailer connector and will receive as input running power, left turn signal, right turn signal, running light and brake light signals. ...

    €1190 (Avg Bid)
    €1190 Gns Bud
    53 bud
    PCB layout sorrysu Udløbet left

    I am looking for a PCB layout designer, who is having strong knowledge on EMI/EMC. Hands on experience with 4 to 6 layer PCB. Automotive experience preferred . Targeted product looks similar to those attachment. Schematics prepared using Orcad Capture tool

    €158 (Avg Bid)
    €158 Gns Bud
    17 bud

    Porting over a older project from IDE 8 on PIC24E to Harmony 2 on PIC32MZ with FreeRTOS. Need ongoing help to develop drivers that will work in FreeRTOS for i2c, SPI, analog, webpage, UART, and a number of special protocols. This is ongoing, so milestone will be continually be created.

    €17 / hr (Avg Bid)
    €17 / hr Gns Bud
    7 bud

    fw code devolper that work with pic16 microchip

    €14 (Avg Bid)
    €14 Gns Bud
    3 bud

    I need someone that is good with microchip and is able to research and figure out how to program a hex file on a microchip using the usb port & sd card slot that is on the pcb

    €3725 (Avg Bid)
    €3725 Gns Bud
    12 bud

    HI Requires design insolation tester ( megger) of 500v to automatedly test cable with 16 wires. ** please see the attached block diagram Develop the tester ( like megger tester ) with ORCAD ( HW diagram), with all the components that can be found in digikey/mouser. Discretion: 1. 16 wire are connected to the tester board. 2. Your insolation design controlled by microchip pic 33 (MCU). 3. ...

    €487 (Avg Bid)
    €487 Gns Bud
    5 bud

    Hi brother I have 2 electronic reports One by using lap view And others by using OrcaD

    €9 (Avg Bid)
    €9 Gns Bud
    1 bud

    Hi brother I have 2 electronic report One by using LapView and other one by using OrcaD

    €9 (Avg Bid)
    €9 Gns Bud
    1 bud

    First iteration prototypes of a multi-channel Audio mixer with Bluetooth needs redesign/ improvements for production. Schematics in Orcad and PCB layout in “boardmaker” (DOS). You would be required to redo circuit redesign and relayout. Reduce 3 boards to 2 , improve performance, reduce cost, and include production requirements for volume manufacture and test.

    €2673 (Avg Bid)
    €2673 Gns Bud
    22 bud

    Hello, I am looking for a programmer. The freelancer has to be proficient in programming ATtiny1616, IC MCU 8BIT, from Microchip. Previously an AVR® 8-bit processor. The job is to update an existing program, like modifying the LED blinking, timer etc... We will provide more details. Thanks

    €18 / hr (Avg Bid)
    €18 / hr Gns Bud
    14 bud

    We are a startup, working on smart connected helmets. The microcontroller we are using is Atmega 328P, programmed by the Arduino IDE. For our bluetooth connectivity purposes, we need to integrate BM-62/64 with our Arduino system to achieve the following functionalities:- Change the name of the device Accept/Reject/Drop/Redial Call Play/Pause/Stop/Next/Previous Music Volume up/down Send SPP data...

    €132 (Avg Bid)
    €132 Gns Bud
    4 bud

    El proyecto esta hecho con el stack TCP/IP de microchip y no me envia variables a un webserver (ubidots). Tengo algo mal en el código pero no me doy cuenta.

    €165 (Avg Bid)
    €165 Gns Bud
    6 bud

    Layout and routing of a 2 layer PCB. Schematics are in Orcad Format. Creation of Gerbers and Bom from Schematic

    €103 (Avg Bid)
    €103 Gns Bud
    31 bud

    This is Phase 1 of a 3 phase project. Only one phase is active at a time. Subsequent phases will begin at the completion of the current phase. A successful freelancer will have the best opportunity to bid on and perform work needed in subsequent phases. I need an example program from Microchip that includes a Microchip (Atmel) SAMD21 micro processor and a Microchip (Atmel) ATWINC1500 Wi-Fi module...

    €1130 (Avg Bid)
    €1130 Gns Bud
    28 bud

    Small controllers for pump stations. Different dependence between outputs and inputs and times. LCD Graphic display Internal IIC bus communication. First of all I'd like to try if this way could work to develop may software. At the begin a can send a small existing program to let check, if the freelancer understands it. If yes, he can use a lot of subroutines and can make in existing pr...

    €1158 (Avg Bid)
    €1158 Gns Bud
    41 bud

    This is what it should do: Constantly watch the voltage on one of the analogue in pins. Wait for one of the digital in pins to go low. Now generate a PMW on one of the outputs (called V_open), this PWM is derived from the measured analogue in. Wait for t_wait milliseconds, than generate a second PWM on the same PWM output (called V_hold), also derived from the measured analogue in. This second PWM...

    €173 (Avg Bid)
    €173 Gns Bud
    10 bud

    Looking for a qualified Electrical Engineer or Computer Engineer. Must have experience in Embedded Hardware development, debugging and fault finding and using test instruments. Must also have experience in Embedded Software development, firmware writing in C, more specifically be proficient in writing codes for 8/32 bits microcontrollers (Atmel/Microchip). Familiarity with RTOS in embedded contro...

    €320 (Avg Bid)
    €320 Gns Bud
    20 bud

    We are an audio sensor device maker in need of a PIC MCU designer to program & deliver documented MPLAB C-code and three (3) programmed/functioning sample devices of a specific Microchip PIC10F206 (an older, simple, 6-pin, 8-bit MCU w/ built-in clock and comparator). The program/device simply sleeps in low power until PIC detects pin change, then wakes up and compares analog input voltage leve...

    €583 (Avg Bid)
    €583 Gns Bud
    25 bud

    I have a old project and source code which is on Microchip MPLAB IDE. I need someone to co figure my MPLAB to run and compile this source code.

    €94 (Avg Bid)
    €94 Gns Bud
    21 bud
    Cartel LED Udløbet left

    Necesito software + programa para cartel led. Preferiblemente con Microchip. PCB matriz de LED diseñado con 74HC595.

    €150 (Avg Bid)
    €150 Gns Bud
    8 bud

    I am looking for someone who can make a FFT function for an accelerometer vibration monitoring application. I have developed a sensor board that has ST LIS2DH12 and Microchip PIC 18F25K20 microcontroller running at 16MHz from it's internal oscillator. The code for the processor is done using Proton BASIC language. How the code should function: A 256 x 16bit signed word buffer which is fille...

    €479 (Avg Bid)
    €479 Gns Bud
    10 bud

    1. INTRODUCTION Our company has recently developed a new electronic TFT control interface based on existing TFT product but adding some new features. The purpose of this document is to define the requirements for a new firmware development based on Microchip MPLAB Harmony platform. 2. TFT CONTROLLER HARDWARE TFT controller is an embedded hardware design based on PIC32 microcontroller. This ar...

    €7961 (Avg Bid)
    €7961 Gns Bud
    36 bud

    A Freelancer with skills in digital logic design is needed to write a small program for a CPLD device using WinCUPL. Atmel/Microchip devices would be used. The CPLD will manage clocking a fixed byte stream into a FIFO ic. The byte stream will not pass through the CPLD device. The program should be simulated and verified. Please see attachments and feel free to offer suggestions.

    €166 (Avg Bid)
    €166 Gns Bud
    3 bud

    Looking for a qualified Electrical Engineer or Computer Engineer. Must have experience in Embedded Hardware development, debugging and fault finding and using test instruments. Must also have experience in how Embedded Software development works and collaborate with developers of PCB and / or firmware to load, debug and run sniffing and probes on hardware and serial lines where required in locatio...

    €32 / hr (Avg Bid)
    €32 / hr Gns Bud
    11 bud

    Looking for a qualified Electrical Engineer or Computer Engineer. Must have experience in Embedded Hardware development, debugging and fault finding and using test instruments. Must also have experience in Embedded Software development, firmware writing in C, more specifically be proficient in writing codes for 8/32 bits microcontrollers (Atmel/Microchip). Familiarity with RTOS in embedded contro...

    €380 (Avg Bid)
    €380 Gns Bud
    23 bud

    Need the C code of the driver of I2C for Atmel microcontroller. I have uploaded a application note of atmel/microchip you just need to implement it in keiluvision.

    €56 (Avg Bid)
    €56 Gns Bud
    9 bud

    Requerimos el apoyo en la busqueda del mejor proveedor en los Estados Unidos de un chip de implante GPS Satelital para rastreo y localizacion. La aplicacion sera ofrecida como parte de un servicio para cuidar ancianos en su perdida. Se requiere de un proveedor confiable que nos permita realizar la compra segura y aprobada por la FDA en los estados unidos. El trabajo consiste en apoyar para la efec...

    €106 (Avg Bid)
    €106 Gns Bud
    4 bud

    I need u to develop an iPhone app and microchips So the app can remotely control the movement of micro chips.

    €194 (Avg Bid)
    €194 Gns Bud
    3 bud

    Need three small PCB's laid out from schematics in Orcad. I have mechanical dimensions and etc. These PCB's are small with 30 - 60 components each. Most of the components are 0805 size. These will be 4 layer boards with ground an power on the internal layers. Also need these quickly.

    €426 (Avg Bid)
    €426 Gns Bud
    49 bud

    I have Orcad schematic files, Concept schematic files and Allegro layout (.alg and .brd) files. Is it possible to convert them to Circuitstudio (Altium) format?

    €25 / hr (Avg Bid)
    €25 / hr Gns Bud
    20 bud

    The project is to develop a bootloader (and custom firmware update software) for both the ATMEL ATSAME70J19 and the AT90CAN32 microcontroller, which will allow for reprogramming the boards via the CAN bus. The CAN bus will have multiple of these microcontrollers, so they will need to be addressable. There are three parts of this project: 1. Write a bootloader for the ATSAME70J19 microcontroller...

    €3829 (Avg Bid)
    €3829 Gns Bud
    16 bud

    The project is to develop a bootloader for both the ATMEL ATSAME70J19 and the AT90CAN32 microcontroller, which will allow for reprogramming the boards via the CAN bus. The CAN bus will have multiple of these microcontrollers, so they will need to be addressable. There are three parts of this project: 1. Write a bootloader for the ATSAME70J19 microcontroller, which will allow for upgrading firmw...

    €1207 (Avg Bid)
    €1207 Gns Bud
    22 bud

    Optimize the existing design for size and functionality. Following changes are needed 1. Do not populate battery connector 2. MicroUSB should be changed to mid-mount 3. Remove screw holes around the corners 4. Increase size of the PCB borders by 1 mm to enclose case 5. ORCAD file after mounting components for case designing. Expected size of the PCB = 38 * 24 mm or less Working and producable de...

    €1029 (Avg Bid)
    €1029 Gns Bud
    34 bud

    I am looking for a power electronics engineer, Who is having Good knowledge on Schematics & PCB Layout. with Hi-power SMPS design experience Currently I am having 9 Pages pdf SMPS schematics, I would like to develop a design & PCB for the same, Preferably Cadance Orcad (not Mandatory) Thanks & Regards Pavan

    €157 (Avg Bid)
    €157 Gns Bud
    12 bud