Openwrt install wrtsl54gsJobs

Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    825 openwrt install wrtsl54gs jobs fundet, i prisklassen EUR

    Hello, Job would be to compile an ipk file of SHC that would work with LEDE OS (openwrt) and the processor used in our system - will provide details SHC can be downloaded here: [log ind for at se URL]~frosal/ I think you must have a 64 bit system to use the SDK to compile the file Please tell me more about your experience in doing such

    €129 (Avg Bid)
    €129 Gns Bud
    3 bud

    Hello, Job would be to compile an ipk file of SHC that would work with LEDE OS (openwrt) and the processor used in our system - will provide details SHC can be downloaded here: [log ind for at se URL]~frosal/ I think you must have a 64 bit system to use the SDK to compile the file Please tell me more about your experience in doing such

    €32 (Avg Bid)
    €32 Gns Bud
    1 bud

    ...directly from the build folder I created during fetching). You will need knowledge of both the Litecoin code, OpenWRT (packages and Makefiles), and cURL. I've done the integration and the generation of libcurl libraries and OpenWRT package makefile (.mk) so this should be a very quick job for someone with knowledge listed above. I just don't have

    €187 (Avg Bid)
    €187 Gns Bud
    4 bud

    For both ramips and ar71xx, I need the following. Router connected on the LAN side, allowing remote access to a web service and/or other service without having to touch the main router/firewall. Something like reverse ssh maybe? Remote access could be allowed from only one remote location. From there, the user would open a connection to the router/service.

    €73 (Avg Bid)
    €73 Gns Bud
    10 bud

    we want a OPEN WRT build that has OTA upgrader and has a custom web interface and a MQTT client to provide config we are just finishing a requirement

    €504 (Avg Bid)
    €504 Gns Bud
    21 bud

    ...embedded Linux processes and understand wireless/wired networking fundamentals. Must Have Requirements Experience in Linux cross compiler environment, familiar with OpenWRT firmware development. Knowledge of MTK/Atheros chips and their device drivers Expert knowledge of Linux network architecture and kernel user communication. Familiar with TCP

    €813 (Avg Bid)
    €813 Gns Bud
    13 bud

    I need a helloworld project for using a libusb-1.0 on OpenWRT SDK. I want to compile the example of libusb library files to access usb device on my OpenWRT router. I have written an application to use libusb and to send commands to an external device. I managed to compile it on Ubuntu 16.04 with linked libusb-1.0.a file in the executable. Now I need

    €11 / hr (Avg Bid)
    €11 / hr Gns Bud
    6 bud

    experience in networking & OpenWRT project to compile custom openwrt firmware with packages needed for our device use case. Need to have ability to build branded Web interface to configure few networking components like WAN, DNS etc. compile and deliver Firmware for all the devices supported by OpenWRT project as per above requirements.

    €440 (Avg Bid)
    €440 Gns Bud
    6 bud

    ...[categoryB] item3 = value3 Should be available for modification through a Luci page that can easily be included in an OpenWRT release. Second it should be possible to upload a (Google) [log ind for at se URL] file via this page onto the OpenWRT system. Finally it should be possible for the page to interact with a Python script that needs to be authorised

    €531 (Avg Bid)
    €531 Gns Bud
    7 bud

    We want to have a program to connect SLIP to MQTT. Currently, we use tunslip6 (SLIP to ...have a program to connect SLIP to MQTT. Currently, we use tunslip6 (SLIP to v6), but we want to develop a SLIP to MQTT (bidirectional). We want to run it into Linux (openWRT). Please contact us if you have experience in C, RPL, Contiki, 6lowpan.

    €529 (Avg Bid)
    €529 Gns Bud
    3 bud
    Smart Device Udløbet left

    Environment: OpenWrt on MediaTek LinkIt Smart 7688 Customization: Implement x.509 CA for cloud authentication Implement MQTT client with JSON payload for cloud communication Customize Wi-Fi network setup and connection via a smartphone app: broadcast a default SSID for app to connect, discover and select a SSID to connect.

    €1079 (Avg Bid)
    €1079 Gns Bud
    20 bud

    ...experience with OpenWRT for various tasks. Please bid only if you have experience setting up OpenWRT, and preferably have experience compiling it and customizing it. 2- We're looking for someone with experience with site to site VPN (connect to LTE router) 3- Looking for a developer to help me modify firmware for a Router. Router has Openwrt but needs

    €781 (Avg Bid)
    €781 Gns Bud
    13 bud

    I want use this device (a5v11) as access point and add it to existing router [log ind for at se URL] Users will connect to a5v11, watch a 10 seconds video stored on its flash ram and authenticate on captive portal using their social networks account before browsing the internet. There is already a web application managing collected users data and broadcasted videos.

    €212 (Avg Bid)
    €212 Gns Bud
    4 bud

    We are looking for an experienced embedded Linux kernel driver developer to optimize wireless driver of MT7620A on OpenWRT. If you need any further information from us, [Removed by Freelancer.com admin]

    €491 (Avg Bid)
    €491 Gns Bud
    8 bud

    I need a custom Captive Portal to be built based on OpenWRT Chaos Calmer. (Device Details: GL-iNet M300N) The Authentication Server / Login Page is already built and is hosted online, and is flexible towards changes for the Captive Portal. Criteria: - NO RADIUS server is used - Authentication Server / Login page is very simple, user logs in

    €1335 (Avg Bid)
    €1335 Gns Bud
    6 bud
    openwrt linux sdk Udløbet left

    training on bulding openwrt firmware traingin on interfacing the openwrt with RF interface over serial port

    €106 (Avg Bid)
    €106 Gns Bud
    7 bud

    Hi, We would like custom firmware creating for an off the shelf router using OpenWrt. We are using this router along with our own software. The router doesn’t need to connect to the internet as it is just used to create a LAN. It needs to able to connect to up to 100 clients via Wi-Fi and one laptop by Ethernet cable. We want the firmware to

    €322 (Avg Bid)
    €322 Gns Bud
    5 bud

    Hello! I've got a router TP-Link TL-WR741N - there is 4mb flash and I installed there OpenWrt. All works fine. About 1,0mb are still free. Also I have VPS, and there I have file - [log ind for at se URL] My goal: I need to replace all advertisement in browser by empty fields and insert my script.js. Not just block advertisement - I need to replace it with my file

    €104 (Avg Bid)
    €104 Gns Bud
    5 bud
    GATEWAY OPENWRT Udløbet left

    The project is based on our hardware that can be found in the enclosure. The software has to be coded in C for OPENWRT and the hardware platform is MT7688 as you can see also the enclosure. The application interfaces a web center via internet and send information to local devices through a radio board just programmed by us and interfaced with

    €695 (Avg Bid)
    NDA
    €695 Gns Bud
    5 bud

    To Develop firmware for Atheros XD9341. 1/ Make sure 5 Ghz and 2,4 ghz work 2/ VLAN works 3/ Works in both dhcp and gateway mode 4/ AutoChannel 5/ provide with sourcecode and image

    €17 (Avg Bid)
    €17 Gns Bud
    1 bud

    1/ Make sure 5 Ghz and 2,4 ghz work 2/ VLAN works 3/ Works in both dhcp and gateway mode 4/ AutoChannel 5/ provide with sourcecode and image

    €30 (Avg Bid)
    €30 Gns Bud
    1 bud

    ...installed there OpenWrt. All works fine. About 0,6mb are still free. Also I have VPS, and there I have file - [log ind for at se URL] My goal: I need to replace all advertisement in browser by empty fields and my script.js. Not just block advertisement - I need to replace it with my file [log ind for at se URL] You can find a adblock at [log ind for at se URL]

    €134 (Avg Bid)
    €134 Gns Bud
    1 bud
    Router glcd Udløbet left

    my project is to interface GLCD to wireless router to display the upload and download traffic used by this router ,the router work with openWRT software . i need just GLCD hardware and interface software . the glcd monitoring upload traffic , download traffic , router supply voltage , real time , internet bandwidth usage by the router

    €467 (Avg Bid)
    €467 Gns Bud
    4 bud

    Hi, i need someone to compile a LEDE openwrt image with luci and coovachilli.

    €358 (Avg Bid)
    €358 Gns Bud
    13 bud

    Currently OpenWRT WiFiDog does not support HTTPS when connecting to the Auth Server, I need this to be added in. I have the authserver built, this is fine and no work needs to be done on this. There is also a bug when loading the captive portal on an OSX machine and logging in via Facebook, for some reason the CSS will not load for the Facebook

    €60 (Avg Bid)
    €60 Gns Bud
    1 bud
    Switchback Udløbet left

    OpenWRT implementation on an MT7620A SoC. Will need to include a cellular data connection probably via USB port. Will need to have a NMEA 2000 implementation via serial port. Will have 1 WAN port and 1-4 LAN ports. Will have Wi-Fi enabled and operational. Most if not all of the software is already in existence and available on github. It primarily

    €1812 (Avg Bid)
    €1812 Gns Bud
    11 bud

    OpenWRT experts only !!! We are having an issue to send a simcard from simbank (which runs on TP LINK MR3420 CPE (static IP)) to the gateway (runs on seperate TP LINK MR3420 CPE with static IP) both CPEs are on and connected to VPN tunnel, also the servers are also on and can ping both externally. The issue is a configuration issue: we have

    €123 (Avg Bid)
    €123 Gns Bud
    3 bud

    *Please read to the end before responding* I'm looking to extend the capabilities of the GL-MT300A mini router (OpenWRT based) I want to leave its current capabilities intact, but enable SIP recording I have a similar setup on a Raspberry Pi using Oreka and inotify to upload completed audio files to my server Here is what I am looking for as a deliverable

    €35 / hr (Avg Bid)
    €35 / hr Gns Bud
    4 bud

    Design an advertising solution using openWRT hotspots (TP-Link TL-MR3020). Devices will be stand alone, installed in coffe shops. Ads will be videos and images Ads campaigns management Devices monitoring Statistics and reports

    €2599 (Avg Bid)
    €2599 Gns Bud
    11 bud

    Design an advertising solution using openWRT hotspots (TP-Link TL-MR3020). Devices will be stand alone, installed in coffe shops. Ads will be videos and images Ads campaigns management Devices monitoring Statistics and reports

    €648 - €1295
    €648 - €1295
    0 bud

    I'm looking for a developer who can build a custom firmware image for a TP-Link Router (model MR3020 - Version 2 & Version 3). This firmware will allow a captive portal (splash page) to be made on the router. The splash Page will contain a link to a webpage. When the user clicks on the link to the web page, the user will be automatically dis-connected from the MR3020 router and p...

    €208 (Avg Bid)
    €208 Gns Bud
    7 bud

    I have configured many openvpn with ddwrt/openwrt and centos This is the first time I am trying with tomato and can not get it to work I have web and ssh access to the router The server is not the issue. I am looking for someone who can configure for me.

    €154 (Avg Bid)
    €154 Gns Bud
    3 bud

    Custom Graphical Interface Development for Linux OpenWrt. Summary: OpenWrt Linux graphical interface development, with two main purposes. 1- Network configuration in Linux OpenWrt: Web interface for configuration of Wifi and Ethernet adapters, with static IP option, DHCP client and DHCP server. 2- Forms: Forms that must be completed by the

    €1079 (Avg Bid)
    €1079 Gns Bud
    17 bud
    Coovachilli Udløbet left

    I need you to develop some software fo...software for me. I would like this software to be developed for Linux using C or C++. I have a running hotspot company that work with coovachilli as access controller under openwrt for several AP‘s We need you to solve a dns problem happen with the coovachilli redirection HS_UAMdomains not working properly

    €153 (Avg Bid)
    €153 Gns Bud
    3 bud
    Write some software Udløbet left

    I need you to develop some software fo...software for me. I would like this software to be developed for Linux using C or C++. I have a running hotspot company that work with coovachilli as access controller under openwrt for several AP‘s We need you to solve a dns problem happen with the coovachilli redirection HS_UAMdomains not working properly

    €106 (Avg Bid)
    €106 Gns Bud
    7 bud

    ...developers with good knowledge of C, Lua and experience with OpenWRT-based WIFI systems to help us decrease the size of the application and make sure it will fit on space-limited devices. We are using Cloudtrax service [0] with OMPv2 routers [1] to provide WIFI analytics to our customers. We install additional code on the routers via custom shell scripts

    €21 / hr (Avg Bid)
    €21 / hr Gns Bud
    3 bud

    I currently have a project in development and need a skilled person with excellent knowledge on the following topics: - OpenWRT - Linux - IoT - Raspberry Pi - Arduino - RS485 over IP/Serial to IP - OpenHab/SmartThings/HomeAssistant/MQTT The project is based on monitoring solar panels remotely and triggering certain tasks via mobile using a

    €8 / hr (Avg Bid)
    €8 / hr Gns Bud
    7 bud

    We need someone with experience who can build a package which includes installing OpenWrt or dd-wrt or any other Linux flavor on custom wifi router hardware along with Snort installed on it. The developer should have experience of working with routers of industrial grade and should be good at linux.

    €28 / hr (Avg Bid)
    €28 / hr Gns Bud
    9 bud

    ...requirement which is in 4 part milestone. WORK ORDER- PART 1 1. Cloud based openwrt ( Router mode/AP Mode/ Mesh Mode/Bridge Mode ) 2. User to manage/configure hardware via accessing openwrt hosted in the cloud 3. Router Settings are pushed to hardware router from cloud based openwrt 4. Router hardware should be able to connect to cloud based open wrt

    €471 (Avg Bid)
    €471 Gns Bud
    9 bud

    This application acts like a middleware between a hardware device and backend REST API. It has to run openWrt OS. It consists of MQTT client that subscribes to certain topics to fetch data. It should the data, process it, and transmit to backend. Additional requirements are mentioned in the attached document.

    €407 (Avg Bid)
    €407 Gns Bud
    9 bud

    ...for guest, so they can connect with Facebook or another type of account. I could use openwrt and [log ind for at se URL] I asked the vender of the router the firmware to install openwrt, but he provide a patch and I don't know what to do. I f you just install openWRT I could do the rest myself (configure hotspotsystem). Otherwise I would pay for the wh...

    €130 (Avg Bid)
    €130 Gns Bud
    9 bud

    This is a very simple job for an openwrt expert. Need to add live video streaming to an openwrt device using image builder. The use of image builder is so that replication of this solution can be simple. Your solution needs to be sent so that I can add it into the /files section when building. Video compression should allow for remote viewing/audio

    €66 (Avg Bid)
    €66 Gns Bud
    1 bud

    Configuring two routers for two sites ( OpenWRT platform ) all devices under each router should reach each other. The OpenVPN server installed on AWS EC2 with public IP .

    €138 (Avg Bid)
    €138 Gns Bud
    2 bud

    We need a team or developer to customize an open source software; OpenWRT ([log ind for at se URL]) or DD-WRT ([log ind for at se URL]) or TOMATO ([log ind for at se URL]) for wireless access points. In this step, we need to make sure the developer has time and enough knowledge for this project. So, please compile one of above-mentioned open

    €198 (Avg Bid)
    Topkonkurrence
    €198
    1 indlæg
    OpenWRT Developer Udløbet left

    We are looking for expert in developing OpenWRT

    €365 (Avg Bid)
    €365 Gns Bud
    9 bud

    Configuring two routers for two sites ( OpenWRT platform ) all devices under each router should reach each other. The OpenVPN server installed on AWS EC2 with public IP .

    €102 (Avg Bid)
    €102 Gns Bud
    15 bud

    Summary: Install Bossac utility, to record firmware in Flash Sam microcontrols Sam Atmel in Linux distribution 2.6.36 SDK, OpenWrt 3.10, MIPS24KEc 580 MHz. References: Site bossac: https: //[log ind for at se URL] Module Mips, where the installation of Bossac will be done: [log ind for at se URL]

    €180 (Avg Bid)
    €180 Gns Bud
    6 bud

    ...skilled developer with knowledge of openWRT to convert an existing Python based MAC Address capture app to C++. The final product will need to run on a small router (16MB flash and 64MB ram) so you need to be able to write extremely lean and efficient code. You will need to have experience in cross-compiling, Linux, openWRT, network stacks, background services

    €1024 (Avg Bid)
    €1024 Gns Bud
    18 bud

    i need a openwrt custom TP-LINK TL-MR3420 V2 and V3 Firmware if you want you can remove web part also have to stop telnet only running ssh and have to install fastd and i give you a 6kb shell scripts for run startup have to run this command on iptables iptables --table nat --append POSTROUTING -j MASQUERADE u can save it or u can run it every

    €130 (Avg Bid)
    €130 Gns Bud
    5 bud
    Project for Oleh F. Udløbet left

    Hi Oleh F., I noticed your profile. Are you familiar with social wifi platforms (openwrt, openvpn etc). thanks Yorrick

    €231 (Avg Bid)
    €231 Gns Bud
    1 bud