Network topology small companyJobs

Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    1,228 network topology small company jobs fundet, i prisklassen EUR

    Hi I need someone who can help me setup GNS3 with ASAv. A working topology that i can troubleshoot and implement MPLS vrf into the ASAv which will also have DMZ, Intranet behind inside zones. Should be a good lab for troubleshooting Datacenter/ISP topology.

    €36 (Avg Bid)
    €36 Gns Bud
    5 bud

    ...create 3D models with accurate dimensions and proportions, clean topology, real-world scale, unwrapped non-overlapping [log ind for at se URL] will be able to provide the 3D models which would need touch-up or minor changes. The differences between a rendered model and a reference image must be small enough so they are not distracting and look real. Expectations -

    €25 / hr (Avg Bid)
    €25 / hr Gns Bud
    23 bud

    2 CCNA scenario projects with topologies implementation and subnetting topology need to be done on visio. One is egrip protocol other is ospf i have attached both files replay back so we discuss price.

    €73 (Avg Bid)
    €73 Gns Bud
    13 bud

    I need MTR with priority and file generation. Do what you should do

    €349 (Avg Bid)
    €349 Gns Bud
    2 bud

    I would like you can build a simulation for priority queuing in my topology. I will prepare the topology. I want you can generate 2 types of traffic, (1) traffic with highest priority and (2) traffic with lowest priority. I hope you can measure the network performance intern of delay, jitter and packet delivery ratio

    €484 (Avg Bid)
    €484 Gns Bud
    6 bud

    ...the network? Study objective 3: To analyze the performance of the network when the number of nodes connected to the WiMAX increase. Study objective 4: To study the performance of the network based on the output of the simulator through the following parameters: delay, jitter, and throughput. 1.4 Scope: The project s is simulate the network with

    €96 (Avg Bid)
    €96 Gns Bud
    1 bud
    packet trancer Udløbet left

    using cisco packet tracer to configer the topology and use RIP OR OSPF

    €2 / hr (Avg Bid)
    €2 / hr Gns Bud
    2 bud

    perform RIP or OSPF for configuring topology

    €21 (Avg Bid)
    €21 Gns Bud
    63 bud

    Exchange 2013 services on our mail and client access server will not start due to a topology issue after a recent internal IP address change. Don't have the time to resolve it on my own. Need this done ASAP.

    €151 (Avg Bid)
    €151 Gns Bud
    4 bud
    Networking Udløbet left

    You have to implement the given logical topology into a physical topology. By default all the ports are connected but shutdown. You are required to turn on only the required port for your topology. Not allowed to change the the ip address format, rewire, remove or add any additional links.

    €4 / hr (Avg Bid)
    €4 / hr Gns Bud
    7 bud
    Packet Tracer Udløbet left

    Need to use Cisco packet tracer, RIP, Multi area OSPF(build topology and settle down all the IP address)

    €20 (Avg Bid)
    €20 Gns Bud
    6 bud

    I need you develop routing algorithm using ns3 (network simulator 3 in linux ) Any one have experience how to measure bandwidth using pair packet probing، ETX and ETT. I already made the network topology and simulation scenario , my algorithm is routing protocol (on demand) try to find destination if needed. Have control packet forward and backward

    €594 (Avg Bid)
    €594 Gns Bud
    9 bud

    We are looking to delete/sanitize hard drives on a full EMC VMAX array and looking for someone who is an expert in EMC hardware setup/topology. We will be using a host computer/server with FC/SAS ports to connect to the DAE expansion chassis so that they are detected by the host computer/server as JBOD so that we can wipe the drives. WE are looking

    €69 (Avg Bid)
    €69 Gns Bud
    3 bud

    Hi. We have some .iges files (different 3D lanterns), that needs to be re-modelled in 3DS-max. The topology as it is now, is quite bad, so we need the models from the .iges files to be re-build from scratch, with 100% precision in size: mm. We can give you dwg files, containing the actual original drawings etc. and the of course the .iges files Regarding

    €142 (Avg Bid)
    €142 Gns Bud
    30 bud

    Hi, I am trying to set up a SharePoint 2016 environment ... development laptop (single server farm) and getting below errors for a...farm) and getting below errors for a number of services. The service application "User Profile Service Application" could not be created because of the following error: The topology service is not available in the farm.

    €23 (Avg Bid)
    €23 Gns Bud
    13 bud

    You have to implement the given logical topology into a physical topology with able to ping, STP is configured properly, DNS, Email Server, and Web Server. By default, all the ports are connected but shutdown. You are required to turn on only the required port for your topology

    €16 / hr (Avg Bid)
    €16 / hr Gns Bud
    8 bud
    Computer Networking Udløbet left

    Configuring topology using IPV4. Using cisco packet tracer.

    €20 (Avg Bid)
    €20 Gns Bud
    44 bud

    ...All routers and switches you propose for the network. 2. All routers and switches need to be named on the topology diagram. 3. All interconnections between these routers and switches. 4. Addresses, both IPv4 and IPV6 (where appropriate) configured on all devices, and placed on the working model topology. 5. All subnets must be placed on the model I

    €38 (Avg Bid)
    €38 Gns Bud
    30 bud

    hi, 3D model of a werewolf with clothes as in the reference images. With topology and UVs.

    €60 (Avg Bid)
    €60 Gns Bud
    8 bud

    hi, I have a Maya model that needs parts of it redoing and finished for animations. using motion capture data. Blendshapes for face ex...have a Maya model that needs parts of it redoing and finished for animations. using motion capture data. Blendshapes for face expressions included, Face remodeled with proper topology. You will have help. Many Thanks

    €167 (Avg Bid)
    €167 Gns Bud
    9 bud
    Handover algorithm Udløbet left

    In femtocell deployments, the network topology of a cellular network changed when the femtocell is added. Therefore, the most important challenge to the deployment of femtocells faced was the Handover Management within Network. Seamless handover process between macrocell and femtocell base stations is a major challenge of LTE femtocell-macrocell. the

    €175 (Avg Bid)
    €175 Gns Bud
    7 bud

    use a simple topology to start the scenario. Build floodlight controller using Mininet. Then, create simple rules to apply: 1. ACL 2. Rate limit of the bandwidth. apply it between any two hosts in the topology. it is simple project, i need to see the methods that you are using to apply the ACL and Rate limit of the bandwidth.

    €34 (Avg Bid)
    €34 Gns Bud
    1 bud

    use a simple topology to start the scenario. Build floodlight controller using Mininet. Then, create simple rules to apply: 1. ACL 2. Rate limit of the bandwidth. apply it between any two hosts in the topology. it is simple project, i need to see the methods that you are using to apply the ACL and Rate limit of the bandwidth.

    €6 (Avg Bid)
    €6 Gns Bud
    1 bud

    use a simple topology to start the scenario. Build floodlight controller using Mininet. Then, create simple rules to apply: 1. ACL 2. Rate limit of the bandwidth. apply it between any two hosts in the topology. it is simple project, i need to see the methods that you are using to apply the ACL and Rate limit of the bandwidth.

    €44 (Avg Bid)
    €44 Gns Bud
    2 bud

    VLSM and STP. To do topology for STP and VLSM.

    €16 (Avg Bid)
    €16 Gns Bud
    7 bud

    ...provide a strong foundation for the trusted interchange of information about and between the participants in the system-of-systems. The Safety Engine will analyse the IoT topology and signal metadata relative to the relevant safety profiles and will apply closed-loop machine-learning techniques to detect safety violations and alert conditions. The Security

    €498 (Avg Bid)
    €498 Gns Bud
    1 bud

    ...provide a strong foundation for the trusted interchange of information about and between the participants in the system-of-systems. The Safety Engine will analyse the IoT topology and signal metadata relative to the relevant safety profiles and will apply closed-loop machine-learning techniques to detect safety violations and alert conditions. The Security

    €797 (Avg Bid)
    €797 Gns Bud
    1 bud

    use a simple topology to start the scenario. Build floodlight controller using Mininet. Then, create simple rules to apply: 1. ACL 2. Rate limit of the bandwidth. apply it between any two hosts in the topology. it is simple project, i need to see the methods that you are using to apply the ACL and Rate limit of the bandwidth.

    €118 (Avg Bid)
    €118 Gns Bud
    5 bud
    cisco packet tracer Udløbet left

    Network Topology using BGP, EIGRP, ETHERCHANNEL

    €29 (Avg Bid)
    €29 Gns Bud
    15 bud
    CCNA - 2 implement Udløbet left

    Implementing topology of ccna 2

    €67 (Avg Bid)
    €67 Gns Bud
    30 bud
    GNS3 topology Udløbet left

    I need a topology built in GNS3. This topology will be comprised of 3 office branches. Each branch will have a computer host running wireshark, a router and a Cisco ASA firewall. Each branch will be on a different subnet (maybe use ospf) but will be able to communicate with the other branches. I want - GRE over IPSec between HQ and Branch 2; - IPSec

    €51 (Avg Bid)
    €51 Gns Bud
    25 bud
    GNS3 topology Udløbet left

    Hello, I need a topology built in GNS3. This topology will be comprised of 3 office branches. Each branch will have a computer host running wireshark, a router and a Cisco ASA firewall. Each branch will be on a different subnet (maybe use ospf) but will be able to communicate with the other branches. I want - GRE over IPSec between HQ and Branch 2;

    €140 (Avg Bid)
    €140 Gns Bud
    5 bud

    ...human character sculptures based on 2D images, you will need the following skills: designing 3D human character sculptures based on 2D (images) concepts modeling for smooth topology (smooth surface finish, hi-res printing) experience with 3D printing, 3D printing paint finishes, chamber stacking, interconnecting 3D printed pieces experience with STL and

    €1055 (Avg Bid)
    €1055 Gns Bud
    34 bud
    Handover in HetNet Udløbet left

    In femtocell deployments, the network topology of a cellular network changed when the femtocell is added. Therefore, the most important challenge to the deployment of femtocells faced was the Handover Management within Network. Seamless handover process between macrocell and femtocell base stations is a major challenge of LTE ...

    €727 (Avg Bid)
    €727 Gns Bud
    10 bud

    In femtocell deployments, the network topology of a cellular network changed when the femtocell is added. Therefore, the most important challenge to the deployment of femtocells faced was the Handover Management within Network. Seamless handover process between macrocell and femtocell base stations is a major challenge of LTE ...

    €400 (Avg Bid)
    €400 Gns Bud
    5 bud

    ...model 3d human character sculptures based on 2D images, you will need the following skills: designing human character sculptures based on 2D concepts modeling for smooth topology (smooth finish, hi-res printing) experience with 3D printing, 3D finishes, interconnecting 3D printed pieces experience with STL and OBJ/FBX files example programs Maya, 3D

    €448 (Avg Bid)
    €448 Gns Bud
    53 bud

    ...suggestion into account. - It must not be a full body structure, as it would create too many mechanical constrains to my already fragile artwork. - I would like to perform a topology optimization of the structure/it’s component (I know it can be done in Grasshopper but I’m not able to). - The structure carries a very light weight, almost not influential

    €504 (Avg Bid)
    €504 Gns Bud
    28 bud

    Hello, I need help with Application of mathematics. - Topology to be precise. Let me know if you can help. I need the project to be completed in next 2 Days.

    €40 (Avg Bid)
    €40 Gns Bud
    15 bud

    ...the advertising aspects, and to keep consistent to increase sales and increase the followers. Please send me portfolios/examples of your work, also displaying your use of topology. This job would be more suited for skilled 3D modelers, I am not looking for necessarily, extremely professional, but you need to be skilled and experienced in 3D modeling

    €7 / hr (Avg Bid)
    €7 / hr Gns Bud
    70 bud

    Research about setting up AD/Domain Controller across regional using Linus base server. - What Linux server is best choose. - How to setting up across ...AD/Domain Controller across regional using Linus base server. - What Linux server is best choose. - How to setting up across region (3 countries and need redundancy ) - design topology. - 8000 words.

    €156 (Avg Bid)
    €156 Gns Bud
    16 bud

    We are VAS providers, We provide sms,voice and ussd services. Our servers are being hosted with AWS and we are using messaging,voice and ussd servers. We need the topology/blueprint of the total set up including [log ind for at se URL] are connected with the MNOs with an SMPP connection for sms, Sip trunking for Voip. Complete set up deployment procedures.

    €169 (Avg Bid)
    €169 Gns Bud
    4 bud
    Networking Udløbet left

    You have to implement the given logical topology into a physical topology. By default all the ports are connected but shutdown. You are required to turn on only the required port for your topology.

    €19 (Avg Bid)
    €19 Gns Bud
    21 bud

    ...UA data access version built. More info on OPC may be obtained from OPC Foundation website. You have to provide training to us for at least 8 hours to explain the coding topology-structure made in the project & also help encapsulate it into our code project successfully. The budget is flexible. Complete source code in current form, with detailed documentation

    €1205 (Avg Bid)
    €1205 Gns Bud
    14 bud

    ...tract with visitor's terrace • Usable area at least 1.200m2 without basement • Floors: basement, ground floor, first floor 1, upper floor 2 • Maximum height: 15m • terrain topology: o building area rising flat; a maximum of open space as a inner courtyard should be maintained o garden area +7m • Main access: o Street side  main entrance  Entrance for

    €743 (Avg Bid)
    €743 Gns Bud
    70 bud
    Project for Hany E. Udløbet left

    Doing some analysis and comparisons for some factors influence energy consumption in the tree topology of the wireless sensor network that based on AODV traffic routing protocol

    €156 (Avg Bid)
    €156 Gns Bud
    1 bud
    Trophy icon Company illustration Udløbet left

    Hi, I need an illustration made for my company Gapit. It can be in the form of a topology drawing, info-graphic etc. open for suggestions. The company works primarily with software and programming. The core technology is micro-services which is used to gather information from industrial devices and translate it to be used on modern IT platforms

    €217 (Avg Bid)
    Garanteret Forseglet
    €217
    49 indlæg

    I need you to develop some software for me. I would like this software to be developed using C or C++. I designed a network topology on GNS3.i want a plugin that can work with GNS 3 and should include features like efficiency calculation or bandwidth measurement per node.

    €112 (Avg Bid)
    €112 Gns Bud
    4 bud

    ...The app must be able to pull the following types of data for each URL given: - DNS records (A, PTR, SOA, MX, CNAME, NS) - Network Information (Autonomous System) REQUIREMENT 2: The app must be able to create a network topology map like the robtex website does. REQUIREMENT 3: This application will have a wordpress front-end and must support login via

    €112 (Avg Bid)
    €112 Gns Bud
    20 bud

    I need you to develop some software for me. I would like this software to be developed using C or C++. I am working on networking tool Gns3 and designed a simple topology using routers and implemented ripv2 EIGRP and OSPF protocols. I pinged the devices and calculated the return time to check the efficiency. but this entire thing is tool based and now

    €141 (Avg Bid)
    €141 Gns Bud
    7 bud