Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    3,130 linux live usb jobs fundet, i prisklassen EUR

    A freelancer is need to write a USB mass media interface for legacy MS-DOS. This should be coded in C++ using the OpenWatcom compiler. The program will need to be written as a 32-bit protected mode executable. Along with the program, a test program should be provided. The test program should also be compiled as a 32-bit protected mode program. The

    €290 (Avg Bid)
    €290 Gns Bud
    6 bud

    PCIE USB 3.1 and 10 GB Ethernet card with trigger, Galvanic Isolation and drivers. 3D cad drawing a electrical simulations as part of delivery.

    €592 (Avg Bid)
    €592 Gns Bud
    12 bud

    Looking for a Linux sysadmin who have experience with serial port settings, serial communication. I want to use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need

    €16 (Avg Bid)
    €16 Gns Bud
    6 bud

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    €23 (Avg Bid)
    €23 Gns Bud
    2 bud

    Who can help me to build any tool which enables a remote connected remote usb PC to act as if, is connected to my own computer. I want to be sharing my usb software remotely.

    €26 (Avg Bid)
    €26 Gns Bud
    2 bud

    I needed a tool or software which will enable me to remotely share my usb with other remote computer(s). Example, for unlocking purposes

    €26 (Avg Bid)
    €26 Gns Bud
    3 bud

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    €45 (Avg Bid)
    €45 Gns Bud
    3 bud

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    €38 (Avg Bid)
    €38 Gns Bud
    6 bud

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    €69 (Avg Bid)
    €69 Gns Bud
    8 bud

    There is a led on the cypres fx3 chip board. This function is to turn on the LED by pressing the button on the winform. uvc communication (1.1) version Using the extension unit command guidExtensionCode: {63610682-5070-49AB-B8CC-B3855E8D221D} By sending the extension unit command 0x0D through the above GUID, the LED control Since the maximum value is set to 9, the minimum value is set to 0, ...

    €9 - €26
    €9 - €26
    0 bud

    This interface will be based on the Cypress EZ-USB chip and will be driven by a C/C++ program running on the PC. The C/C++ program will be written in modular format, with functions for each individual elementary/basic control of the devices that we want to control or monitor. Since this project will be part of a course for student training, all software

    €150 (Avg Bid)
    €150 Gns Bud
    3 bud

    ...take photos. Type of freelancer you're looking for - Never stop challenging - Can be manage the project and do the scratch development - iOS developer who has knowledge of UVC(USB video class) and OpenCV ref- [log ind for at se URL] Anything unique about the project or team - The Github and the Jira will be use

    €1104 (Avg Bid)
    €1104 Gns Bud
    39 bud

    ...PC->HDMI->FPGA->HDMI->Monitor 2) PC->USB-> FPGA 3) The PC will send information to the FPGA and create an overlay on the monitor. This software on the PC could be coded in C++ or C. Example, DrawText(x, y, "Truck #19 ready for shipment.") There are many samples online but my knowledge is too limited to combine USB communication and Drawtext or shapes

    €312 (Avg Bid)
    €312 Gns Bud
    7 bud

    HELLO, I NEED TO ADD PRINT FEATURE via usb and bluetooth to an existing app with option on/off autoprint, number of copies i have code you can use it to generate the apk using phonegap

    €207 (Avg Bid)
    €207 Gns Bud
    12 bud

    1. way to check if there is any USB TOKEN / SMARTCARD with certification. 2. querythe device for some "string" in the description 3. send "PIN" to the device. 4. get certificate to sign document. all writen in DELPHI, can use OpenSSL or PKCS#11 pr PCSC dll or what evere needed. all must be free from any Copyright to any therd side

    €545 (Avg Bid)
    €545 Gns Bud
    3 bud

    I am looking a source code of MT7601U Wireless USB wifi adapter Windows Driver. If you can develop it or have it, please bid for me. Thanks.

    €3557 (Avg Bid)
    €3557 Gns Bud
    6 bud

    In order to use Dosbox Emulator on Android devices, we must be able setting the usb port to serial port function, thus, our DOS application will have communication with external serial devices.

    €498 (Avg Bid)
    €498 Gns Bud
    8 bud

    We are looking for USB chargers ID design,including USB Home chargers,USB Car chargers,Multi-USB charging stations with unique and compact design

    €147 (Avg Bid)
    €147 Gns Bud
    10 bud

    preciso de um desenvolvedor em ccs compiler para utilizar a biblioteca 16FUSB para criar um teclado USB HID com o pic 16F628A

    €124 (Avg Bid)
    €124 Gns Bud
    1 bud

    ...(with simple switch or similiar). The device must be connected with a computer with USB. On the computer, I have a software where I can define, at which number of device the LED should switch on. 100-200 of that device will be conncted to one computer, so I'm not sure, if USB is the best way to connect. Maybe a differnt way is much better, or a optical connection

    €1411 (Avg Bid)
    €1411 Gns Bud
    41 bud

    I am looking for some .Net code that will allow me to reliably send text commands directly to a USB port (not through windows print spooler).

    €346 (Avg Bid)
    €346 Gns Bud
    7 bud

    Hi. I want to build a smaller version of the fly/mosquito racket/swat and I want to have a charging by USB capability

    €194 (Avg Bid)
    €194 Gns Bud
    9 bud

    I need you to develop some software for me. I would like this software to be developed using C or C++. Use pic18lf45k50 to be a mass storage usb device with ability to write/append to file using SD card

    €40 (Avg Bid)
    €40 Gns Bud
    6 bud

    I need you to develop some software for me. I would like this software to be developed using C or C++. To make a pic18lf45k50 appear as a mass storage device with and sd card using mplabx and xc8. with ability to write/append to a file

    €196 (Avg Bid)
    €196 Gns Bud
    10 bud

    I have my program already now its used usb dongle to control license .And now I would like the license tool able to generate license which able to define number of users , expiredate or unlimited date , and lock my program to use only one computer was defined ( by cpu id )

    €909 (Avg Bid)
    €909 Gns Bud
    8 bud

    I have an USB hard drive which contains an encrypted Linux LUKS partition whose password I have forgotten. However, I have a list of possible passwords as a text file. One password candidate per line. There are about 100 password candidates in this file. I need you to write a script I can run in Linux that will try to open the USB hard drive, which

    €22 (Avg Bid)
    €22 Gns Bud
    1 bud

    ...monitor from from a PC via its USB port. This device will have an I/O port (one for for 8-bit input and one for 8-bit output ). Also, apart from the I/O, I will need a few additional lines to work as CONTROL lines. The interface circuitry could be built using an ARM Cortex micro-controller, or use an available standard USB interface chips. In either case

    €165 (Avg Bid)
    €165 Gns Bud
    32 bud

    Hello, we have designed a new QR code scanner device. For security reasons we couldn't use a normal USB socket so we redesigned it. So to install the software we need a adapter "USB to our specially designed socket". It has to be a design for manufacturing, so we can 3D print it and use it immediately. I'll send you a file after signing an NDA, how

    €1964 (Avg Bid)
    €1964 Gns Bud
    46 bud

    Need single USB 3amp ultra fast smartphone charger design with following technical specifications and features: Technical specifications and features: • output voltage: 3.6V to 12V and the maximum output current: 3A or slightly greater than that like 3.1 or 3.4 amp and this power should be 18W (Not cheaper and conventional design like output 5V/3A

    €2173 (Avg Bid)
    €2173 Gns Bud
    8 bud

    I have a program installed on my desktop and for some reason its not able to detect the usd reader. need someone that can take a look at it remotely

    €57 (Avg Bid)
    €57 Gns Bud
    1 bud

    I'm struggling to solve issues with my Windows10 system that uses two USB (DisplayLink) monitors. Two problems need solving: 1 - Random artefacts: at times the monitor(s) are not properly rendered (refreshed); 2 - Displays swapping: at times after reboot the two monitors are swapped;

    €173 (Avg Bid)
    Fremhævet Garanteret Topkonkurrence
    €173
    9 indlæg

    ...detailed description of circuit operation Specifications: - usb-c in - 3 voltage rails (plus gnd) out: 3.3v, 5v, 12v. - combined rail supply 1.5A+ - SMD parts - <= US$3.50 components at volume of 1,000 pcs - <= 20mm*40mm. - 0.5-1A charging with under/over protection & low voltage cutoff. - When USB-C wall supply is plugged in, operates off wall supply only

    €343 (Avg Bid)
    €343 Gns Bud
    21 bud

    Build printed circuit from a blueprint drawing project of the item attached. PCB file requested. Possibile request to build an hardware prototype with USB port (not LPT port like the original): request of MOB Excel file. I already have a PDF file of the original blueprint.

    €170 (Avg Bid)
    €170 Gns Bud
    17 bud

    Just as the title says, I want a custom Kali Linux distro made for me and given to me in the form of an .ISO file. Here's what I want custom on it. -I have a 2017 Macbook Pro 15" with TouchBar. See attached image for more details on my system. Currently many items do not work natively with Kali on my Macbook Pro. The keyboard and trackpad don't work

    €149 (Avg Bid)
    €149 Gns Bud
    5 bud

    Want an app that can store fingerprints of multiple people. Fingerprints to be authenticated in the app Clock in and clock out timestamp stored for every user based on fingerprint detected. This clocking information is synced to an online db (mysql) Developers who have done a similar project in the past are preferred.

    €1096 (Avg Bid)
    €1096 Gns Bud
    72 bud

    ...von 100 bis 1000 Hz Hardware wäre hierfür (bis zum Step-Motor-Treiber) auch vorzuschlagen bzw. zu entwickeln. Die Ansteuerung der Motorsteuerung/Lichtssteuerung sollte über USB 2.0 erfolgen. LICHTSTEUERUNG Unter Umständen ist auch geplant die Lichtsteuerung (LED-Leuchte) über die Software zu steuern. Dabei kommt ein PWM-Controller zum Einsatz. Die

    €33 / hr (Avg Bid)
    €33 / hr Gns Bud
    3 bud

    ...Application as user interface for dispensing equipment. System • Android Version 4.4.2+ compatibility (may be possible to makes this 6.0+) • Serial read and write using USB OTG and USB to RS232 adapter. • Track usage data • Display always on • Lock Rotation Portrait/Landscape User Interface (Main Activity) • 4 Size Options (identification of selecti...

    €149 (Avg Bid)
    €149 Gns Bud
    5 bud

    Design the PCB, provide the correct drivers and fit the PCB dimensions into the enclosure provide by me.

    €130 (Avg Bid)
    €130 Gns Bud
    27 bud
    Program a USB stick Udløbet left

    I need USB stick designed to install an app on any smart tv.

    €106 (Avg Bid)
    €106 Gns Bud
    1 bud

    small software that can manage with canable usb interface.A page with the info from 10 can ID frames. Send 3 types can frame and get results

    €500 (Avg Bid)
    €500 Gns Bud
    12 bud

    I have a Xamarin Android app that is sending commands via usb connection to Arduino. On certain devices, the connection is not working. Your job is to help troubleshoot why.

    €9 / hr (Avg Bid)
    €9 / hr Gns Bud
    5 bud

    Hello I'm looking for a computer engineer who can help me and do for me scripting or controlling the input and output of the digilent analog discovery 2 and also measu...can also feed input and plot and analyze output and measure the impedance and control the device fully from PC (windows 10), the device can be connected to the PC through a USB cable.

    €170 (Avg Bid)
    €170 Gns Bud
    25 bud

    Hello, I want an application that can search documents with keywords in a usb key. We will have several documents dispatcher in different folders. Contact me for more details

    €168 (Avg Bid)
    €168 Gns Bud
    13 bud

    I want a USB stick that runs Windows XP so I can use some of my old programs just by booting from the stick.

    €16 (Avg Bid)
    €16 Gns Bud
    15 bud

    Hello freelancer I am looking for someone, in order to design a project by using Proteus to simulate PIC18F4550 USB-HID Device. in which the microcontroller generated "text or code" and then read this "text or code" by C# Form to show as a label.

    €35 (Avg Bid)
    €35 Gns Bud
    13 bud

    eBook reader that is capable of accessing files (documents) encrypted and hidden in a USB flash drive. The hidden documents will be write protected thus duplication of such documents onto other storage media is prohibited.

    €399 (Avg Bid)
    €399 Gns Bud
    6 bud

    I have had enough problems with some computers and I would like them ...would like them to restart if the device stops emitting power for 30 seconds after it has been turned on. "The first 25 seconds the device does not emit current through the usb, the other 5 seconds of margin, and if the device does not reach current then send the pulse to restart"

    €123 (Avg Bid)
    €123 Gns Bud
    11 bud

    we have ST based microcontroller and we want a developer to develop a USB host for this

    €155 (Avg Bid)
    €155 Gns Bud
    6 bud