Linux kernel arm processorJobs

Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    11,968 linux kernel arm processor jobs fundet, i prisklassen EUR

    Write an assembly language program that accumulates and reports the sales for the Albatross Corporation. The Albatross Company has four salespeople who sell five different products. The four salesperson are each identified by a number from 1 to 4. Each products is identified by a number from 1 to 5. Sales are reported by entering the salesperson’s number, the quantity sold, and the product...

    €22 (Avg Bid)
    €22 Gns Bud
    4 bud

    ...program must work with the following setup > - OS : Ubuntu 18.04 / Linux Mint 19 *64bit* - C program only (no C++, no Python, ...) - only use ALSA external library (*) as audio library (no PulseAudio, etc...) - saving signal to disk is not allowed - ideally no low-level kernel programming is needed - ideally the program must compile with a

    €133 (Avg Bid)
    €133 Gns Bud
    11 bud

    I have Ubuntu-mate 18 and I want to install mptcp from the git source as descri...[log ind for at se URL] I followed all the steps. However, I am not sure how to do this step based on Ubuntu-mate "Compile, install and reboot your kernel, as it is recommended by your distribution." Can some one write the commands for me?

    €28 (Avg Bid)
    €28 Gns Bud
    9 bud

    Hello, are you familiar with Linux development? I have a video about Linux kernel, 31 minutes, I have already translated about 89%, but the lecturer has a strong accent when he speaks in English, also the words he mentions are mainly abbreviations about Linux kernel. I have left those words I cannot hear clearly in three dots. Your job is to type those

    €22 (Avg Bid)
    €22 Gns Bud
    1 bud

    LoraWan Gateway Ope...OpenWrt. 1- Install and configure LoraWan Gataway in OpenWrt, Hardware mt7688 mipsel_24kc, 580Mhz and hoperf module RFM95 915Mhz 2- Configure LoraWan Node in arduino, with arm cortex-m0 and modulo hoperf RFM95 915Mhz. 3- Finish communication tests between Node and gateway 4- Document the installation and configuration procedures

    €986 (Avg Bid)
    €986 Gns Bud
    6 bud

    I would like to build a mesh of accelerometers and one heart rate monitor that will send data to a single ARM M0 Cortex, that will use BLE in order to send the data to other devices.

    €628 (Avg Bid)
    €628 Gns Bud
    9 bud

    ...so can be developed completely on desktop however limited resources must be taken into account. LIMITATION The only limitation is that it runs on embedded device on 32bit ARM with 512MB RAM and the CPU is not only for web but also must serve other requests, so the web must be as lightweight as possible, also because of limited HDD space and RAM, we

    €121 (Avg Bid)
    €121 Gns Bud
    3 bud

    ...the server is no longer working. According to Hetzner Support it’s in kernel panic. They’ve put the server in rescue mode and connected a KVM console to help me fix the problem, but I have no clue how to proceed. I need someone to log onto my server, diagnose and fix the kernel panic issue. I’m hopeful it will be simple for someone who actually knows

    €22 (Avg Bid)
    €22 Gns Bud
    3 bud

    I need to improve my C++ code based on CUDA. [log ind for at se URL] needs to be converted to grayscale and the results are not as expected. Please help with kernel and memory reservation / allocation.

    €19 (Avg Bid)
    €19 Gns Bud
    4 bud

    fix minor issues on coinspayment gateaway. btc, eth, and ltc mostly is fixed, just that the exchange rate has a problem. [log ind for at se URL]

    €76 (Avg Bid)
    €76 Gns Bud
    8 bud

    ARM firmware with LINUX for DE10-Nano board A. Play with the evaluation board 1. Project Owner will provide a P0496 ARM Processor base on Cyclone V SE FPGA computer board (DE10-Nano board). The board will have Ethernet port and SD card. 2. Developer needs to prepare LINUX Kernel to run on embedded computer board with Ethernet TCP/IP to connect with

    €3534 (Avg Bid)
    €3534 Gns Bud
    21 bud

    The project requires the design of required components for a simple processor. This shall be used as a part towards a larger idea. The design task is of a single-cycle processor with 32 bit instructions and 16 bit data, to be implemented using VHDL. In case of any doubts kindly contact to clarify requirements before making offers. Expectations: -

    €260 (Avg Bid)
    €260 Gns Bud
    12 bud

    I am looking for someone experienced with the Linux kernel level programming and device management. I need to be able to control how my device boots up and comes online.

    €15 / hr (Avg Bid)
    €15 / hr Gns Bud
    4 bud
    Create a Logo 4 dage left

    I am starting a new food stand business, and my two specialty products is hot dogs and street corn. The name of my business is Kernel Mustard's Hot Dogs & Street Corn. Looking to do a possible play off of the character in the board game CLUE...maybe a hotdog with a mustache and an eye glass.

    €53 (Avg Bid)
    €53 Gns Bud
    109 bud

    ...software for nrf51822 should be migrated to nrf52832 Current versions Softdevice: [log ind for at se URL] Processor: nRF51822QFAA IDE: Keil uVision 5.22.00 Compiler Keil: Product: MDK-ARM Lite 5.22 Component: ARM Compiler 5.06 update 4 (build 422) Tool: armcc [4d3604] Softwares to be updated Bootloader: Project: Bracele

    €946 (Avg Bid)
    NDA
    €946 Gns Bud
    10 bud

    ...official website (datasheet): [log ind for at se URL] - EVE example: [log ind for at se URL] - SAM V71 development board: [log ind for at se URL] - SDK for SAMV7: [log ind for at se URL]

    €237 (Avg Bid)
    €237 Gns Bud
    12 bud

    I need an exe or kernel driver to remove a software silent, the folder is protected. The project need be work 32 and 64 bits, windows 7, 8 and 10

    €451 (Avg Bid)
    €451 Gns Bud
    14 bud

    ...Platform integrations to different ARM and x86 processors Task 1) Need to help us on how to integrate "atv package" in this source "[log ind for at se URL]" with Android root and create an Android TV build Task 2) Need help in customizing the Android TV build to work on different x86 and ARM hardware Task 3) Need to integrate

    €9 / hr (Avg Bid)
    €9 / hr Gns Bud
    4 bud
    Trophy icon Make a company logo 3 dage left

    My company is called 'Thats What She Thread'. I make fiber wall art such as macrames, hanging planters and arm knit blankets to sell. I will also be running workshops teaching people how to make these items themselves. I what my logo to represent my creativity, threading and knotting of the products. Preferably the logo will be a circle to

    €33 (Avg Bid)
    Garanteret
    €33
    141 indlæg

    *Strongly prefer a native English speaker for this task (N. America, Australia/Newzealand, UK). This project involves thoroughly researching two products: a juicer and a food processor from a given local market. You will be suggested brand names to look up as well as search on your own other ones. You will be responsible for reading up on/researching any

    €9 (Avg Bid)
    €9 Gns Bud
    6 bud
    Image processing with MPI... 3 dage left
    VERIFICERET

    The goal of this project is to build a scalabl...update the value of each pixel with the sum of the resulting values by multiplying each element from the filter kernel matrix with the value of each pixel and its surrounding neighbors. The number of neighbors depends on the size of the kernel matrix. For this project we only consider filters of 3 × 3.

    €36 (Avg Bid)
    €36 Gns Bud
    6 bud

    ...must be in Abaqus, as that is the only FEA software I have access to/am familiar with. Attached is a drawing of the part with the relevant geometry and loading. The torque arm shown in the figure is under horizontal and vertical loads transmitted from a shaft at the right hole, while the left hole is fixed. Young’s modulus = 200 GPa, Poission’s ratio

    €109 (Avg Bid)
    €109 Gns Bud
    13 bud
    MAME for ARM developer 3 dage left
    VERIFICERET

    We have the rights to an arcade game and wish to...the rights to an arcade game and wish to target a particular ARM SoC, the ROM's are only supported in the more recent MAME versions. We need someone to build MAME to support this game, and possibly help us patch the game to accept our accessories. Must be familiar with at least one of Linux or Android

    €18 / hr (Avg Bid)
    €18 / hr Gns Bud
    17 bud
    Clean up people 2 dage left

    ...decrease her arm size (not so much that it looks strange just to make it thinner) also need to clean up her face and make it thinner and smooth the wrinkles in her face and the shirt. As well as the taller girl in the blue to clean up the bottom of her dress as she spilled something on it. The blond in the black is the one that i need her arm thinner

    €18 (Avg Bid)
    €18 Gns Bud
    27 bud
    €97 Gns Bud
    10 bud

    ...HAVEN'T HAD EXPERIENCE WITH THESE UNITS AND THE PROTOCOL NEEDED FOR THE DIGISPARK AND WIRELESS COMS. [log ind for at se URL] [log ind for at se URL] https://www

    €70 (Avg Bid)
    €70 Gns Bud
    2 bud

    We need a specialist to join Oxagile Deep Learning team to make it even stronger. The new team member will be a pre-processing arm for deep learning engineer - compiling, re-compiling project's datasets. He will support the algorithm's training with manual job of identifying objects, marking them in appropriate way with frames (with the help of special

    €4 / hr (Avg Bid)
    €4 / hr Gns Bud
    16 bud

    Micro processor CPU java project

    €383 (Avg Bid)
    €383 Gns Bud
    18 bud

    Need an hour a day doing C++ pair programming. If you know how to do kernel modifications is a big plus. Writing a low latency trading system and need insights. When bidding on this project let me know what number is the square root of sixteen so I know you can speak English and you are not a robot.

    €33 (Avg Bid)
    €33 Gns Bud
    5 bud

    implementing an image blurring kernel using CUDA. I have images that will be [log ind for at se URL] to use the shared memory to increase the performance. Detailes will be discussed after.

    €26 (Avg Bid)
    €26 Gns Bud
    1 bud
    3d rigg forklift stand-up 1 dag left
    VERIFICERET

    i need rigging for a model of forklift stand-up native in 3dmax lifting arm extendable fork

    €97 (Avg Bid)
    €97 Gns Bud
    7 bud

    ...decided to discard the original PHP project, just will use the html template and graphics which is already done. The only LIMITATION is that it runs on embedded device on 32bit ARM with 512MB RAM and the CPU is not only for web but also must serve other requests, so the web must be as lightweight as possible, also because of limited HDD space and RAM, we

    €472 (Avg Bid)
    €472 Gns Bud
    17 bud

    Add new payment processor “moneris” to a wordpress plugin The plugin we are using is: Ultimate Membership Pro We have subscriptions and we need to add the payment option called Moneris. UMP doesnt offer this payment option , and we need someone to custom add it in. We need it done very fast and must have experience with Moneris api.

    €142 (Avg Bid)
    €142 Gns Bud
    30 bud
    Trophy icon Design me a Logo 1 dag left

    ...printed very large to go on the outside of our building. Our studio is based in Hollywood so this needs to stand out and be in line with a film feel. We don't need the robot arm on the logo, we are looking for something new but also matches our current branding. Please see files attached for reference. Font used is AVENIR. Final file must be delivered

    €55 (Avg Bid)
    Garanteret
    €55
    159 indlæg

    I have a robot , I need to cover with a piece of 3D printed plastic (for prototyping) I need someone to create a cute design, to match my sketch, i created already a 3d file, for main dimensions you can use for reference. So basicly trasform the ugly 3D model into a cute robot, and add a small head (half dome) on top of the robot

    €138 (Avg Bid)
    €138 Gns Bud
    28 bud
    ARM Assembly Expert - Urgent 1 dag left
    VERIFICERET

    Hi, I need someone experience in ARM Assembly to help me with Theory and coding questions. Urgent requirement

    €128 (Avg Bid)
    €128 Gns Bud
    6 bud

    Writing a server process to res...transmission and have payload and response. This is for low latency like micro seconds. If you are an expert in low latency Unix programming, tell me what's the difference between Kernel mode and user mode. Please respond to this as the first sentence so I know you understand Unix or I know you are a robot bidding.

    €76 (Avg Bid)
    €76 Gns Bud
    2 bud

    I need help with ARM Assembly language. I need someone who can start work in about 6 hours from now.

    €26 (Avg Bid)
    €26 Gns Bud
    1 bud
    loan processor 23 timer left

    We are looking for an efficient Mortgage Loan Processor to process mortgage loan files and help clients submit complete applications. You will gather all necessary documentation and spot mistakes to ensure approval for the mortgage. If you want to succeed as a mortgage loan processor, you should be highly detail oriented. Customer service and communication

    €1004 (Avg Bid)
    €1004 Gns Bud
    23 bud
    Trophy icon Design a Flyer Udløbet left

    ...Card using the attached photos. Scene: The subjects in the attached photos will be in a sleigh, preferably two rows in the sleigh. The first row will be the woman with her arm around Burt Reynolds. I have provided an example. You will need to find a sleigh photo and please use your creativity to create something funny, but good quality. Have fun with

    €48 (Avg Bid)
    Garanteret
    €48
    22 indlæg

    ...opening the inbox or sent items, looking down the tree and retrieving the email in MSG format, or extracting many as a PST file. There are many windows utils to do this, like "Kernel Exchange EDB Viewer", but my product is Centos 7 based. I am looking for a way to call your library to browse the EDB so I can build into products web gui. Searching for an

    €1340 (Avg Bid)
    Fremhævet
    €1340 Gns Bud
    27 bud

    ...these products to eventually build a library of laymen benefit explanations for the employers that utilize our HR technology platform. The end goal for these explanations is to arm employees with digestible information/insight on different benefit types so that they can make educated decisions during the open enrollment process. Content specifics and

    €969 (Avg Bid)
    €969 Gns Bud
    37 bud
    Kernel Programming 16 timer left

    simple c kernel coding for programmers.

    €25 (Avg Bid)
    €25 Gns Bud
    4 bud

    Our website engine KVS (Kernel Video Sharing) only provides an example of how this script should look like, but no actual code. Your task is to finish the script. The example we've got from KVs is attached. As for BunnyCDN, these are their help pages: [log ind for at se URL] And there is even a class that you can get inspiration on:

    €4 / hr (Avg Bid)
    €4 / hr Gns Bud
    4 bud

    Hi, We want to connect our website with BunnyCDN and stream content from this CDN instead of our server. Our website engine KVS (Kernel Video Sharing) only provides an example of how this script should look like, but no actual code. Your task is to finish the script. The example we've got from KVs is attached. As for BunnyCDN, these are their help

    €49 (Avg Bid)
    €49 Gns Bud
    4 bud

    i am looking for a mechanical engineer who can take st...take step files ( autodesk inventor) then do stress test and optimize thickness on machine part. It is a kind of rotary table and i mainly want to customize thickness on table arm, central poles(shaft). A standard report in English would be what i wanted with stress test and optimized thickness.

    €140 (Avg Bid)
    €140 Gns Bud
    52 bud

    I want to create a mobile sdk for this payment processor, link to the documentation here -->>> [log ind for at se URL]

    €64 (Avg Bid)
    €64 Gns Bud
    4 bud

    Creating a device that increases the load on arm. The inputs consist of a variable tension resistor and a flex sensor and the output is a DC motor. Need a program to increase and decrease speed of motor depending on angle and tension of resistor. Exact details and more specific information will be given later

    €18 / hr (Avg Bid)
    €18 / hr Gns Bud
    26 bud

    The goal of this project is to build a scalabl...update the value of each pixel with the sum of the resulting values by multiplying each element from the filter kernel matrix with the value of each pixel and its surrounding neighbors. The number of neighbors depends on the size of the kernel matrix. For this project we only consider filters of 3 × 3.

    €42 (Avg Bid)
    €42 Gns Bud
    6 bud