Java asm microcontrollers jobs

Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    1,635 java asm microcontrollers jobs fundet, i prisklassen EUR

    C++ / ASM Crypter for native fud

    €472 (Avg Bid)
    €472 Gns Bud
    5 bud

    I need a programm..."intensity" of the flicker by changing a variable in the code. This needs to be written in C (not assembler), so I can maintain it later (I program a lot in C for other microcontrollers, but the ATTiny 10 is giving me problems because of its reduced instruction set). This should be a relatively simple and straightforward project.

    €126 (Avg Bid)
    €126 Gns Bud
    8 bud

    I have a project with 2 micro controllers communicating over RS-232 and I have the need for a robust communications and command processing protocol on one of the microcontrollers (the slave device). Commands are received between start and end markers < and > to ensure the full message is received before processing. eg: <command> Your function must

    €151 (Avg Bid)
    €151 Gns Bud
    17 bud
    Expert ASM for check a problem 1 day left
    VERIFICERET

    I need check a problem that I have with a program that so a normal http connection and I need it do an https connection. so I need help. I will chat you for more info if your proposal es interesting. thanks you !

    €120 (Avg Bid)
    €120 Gns Bud
    10 bud

    ...budget for the project is available, however, it is intended for complex tasks that only strong programmers can. In our team at the moment 3 experienced programmers: C, C ++, Asm If you are interested in screenshots or in video materials, please contact us, we have something to show as an example. [RU] Важно: мы работаем на энтузиазме, оплата будет

    €6331 (Avg Bid)
    €6331 Gns Bud
    17 bud

    ...California have been independently evaluated and tested to reduce 'health-related' contaminants as claimed by the packaging. AB 119: [login to view URL] 2. The replacement water filter I (someone living in California) bought on Amazon named Icepure turned out not to be a registered

    €87 (Avg Bid)
    €87 Gns Bud
    34 bud

    We need a programmer for writing / implementing code on MSP430, STM32 and LPC54xxx microcontrollers. The applications are industrial control and automation devices.

    €163 (Avg Bid)
    €163 Gns Bud
    13 bud

    ...étudiant de fin de cycle dans la langue cible - vous maîtrisez au moins l'une de ces langues : anglais, portugais (Brésil et Portugal), russe, thaï, mandarin, italien, arabe (ASM), hébreu, persan, grec. - vous disposez d’une structure vous permettant de facturer votre prestation (auto-entreprise ou autre - Fast n’ Fluent n’éta...

    €136 (Avg Bid)
    €136 Gns Bud
    7 bud

    I require an LCD display library for text and graphics written in C for Microchip PIC microcontrollers using the XC8 compiler and MPLABX environment. This could be a port of the Arduino LCD library 'U8g2'. See ttps://[login to view URL] There are details on how to port to other microcontroller platforms. See [login to view URL]

    €187 (Avg Bid)
    €187 Gns Bud
    10 bud

    modify Solar MPPT Charger pcb and pic micro. code remove pir sensor and its... provide modified and fully working schematic and pcb file provide modified and fully working code files asm and hex files payment will be release only after assembly and testing of pcb if found working detailed documentation and asm file of current will be provided

    €102 (Avg Bid)
    €102 Gns Bud
    8 bud

    need a coder with experience in Arduino and STM32 microcontrollers

    €15 (Avg Bid)
    €15 Gns Bud
    8 bud

    I need a Java programmer to write a few classes for me. These classes are meant to simulate a computer. 1. A read and write class for binary files A compilation process assumes that you read a file written in a high level language and write the corresponding machine language in another file. The objective of this lab will be to provide the necessary

    €268 (Avg Bid)
    €268 Gns Bud
    20 bud

    ...toolchain • Embedded Systems debugging and troubleshooting experience • Hands on experience and knowledge of embedded microcontrollers architectures such as ARM Cortex-M4, ARM Cortex-A9, including software development for these microcontrollers or similar. • Knowledge of interfaces/protocols: I2C, SPI, USB, CAN, RS232 or similar type of communication protocols

    €19 / hr (Avg Bid)
    €19 / hr Gns Bud
    15 bud

    ...development • High speed peripherals e.g., NIC, PCIe, SATA, USB • Working knowledge and experience with PCIe driver development. • Strong knowledge in OS concepts and hands on ASM, C programming. • Experience with low speed interfaces SPI, I2C, UART, etc • Experience using ICE, Logic analyzer, Scopes, JTGA, TRACE tools for debugging hardware issues •

    €195 (Avg Bid)
    €195 Gns Bud
    3 bud

    ...development • High speed peripherals e.g., NIC, PCIe, SATA, USB • Working knowledge and experience with PCIe driver development. • Strong knowledge in OS concepts and hands on ASM, C programming. • Experience with low speed interfaces SPI, I2C, UART, etc • Experience using ICE, Logic analyzer, Scopes, JTGA, TRACE tools for debugging hardware issues •

    €439 (Avg Bid)
    €439 Gns Bud
    2 bud

    Microcontroller programming required for MPPT. Must have prior experience with microcontrollers.

    €137 (Avg Bid)
    €137 Gns Bud
    22 bud

    We would like to work on a library to access Energy Meter data via IrDa or RS-232 channels. It would be preferred to develop the library to operate on ARM-based microcontrollers.

    €854 (Avg Bid)
    €854 Gns Bud
    9 bud

    Hi , I am working on a Project to build a machine with Software ( C#,Microcontrollers..) for Printing Data on PVC Card Printer with different Methodes like ( MagStripe Coding-Encoding, Chip Coding contactless/contactbased. ...Printing on Thermotransfer, Mechanical Embossing) Details of the Project will be shared after we agreed . BR TG

    €2834 (Avg Bid)
    €2834 Gns Bud
    26 bud

    I need a FUD crypter in all windows versions. The crypted result execution file has to be 100% FUD against all Anti Virus Softwares. Ff you have experience, plz feel free to bid. Thank you.

    €306 (Avg Bid)
    €306 Gns Bud
    9 bud
    €101 Gns Bud
    9 bud

    Hi there!! I'm looking for freelancer who can create me a simple mobile size screens that plays video file from SD card using arduino or raspberry pi or any microcontrollers available. please check this youtube video ([login to view URL]), this is exactly the functionality I need. but it would be great if you can suggest me

    €80 (Avg Bid)
    €80 Gns Bud
    21 bud

    - Dragon12-Plus-USB Trainer - For Freescale HCS12 microcontroller family - 12 hour LCD Digital clock - Clock must display HH:MM:SS AM/PM - Time should be cha...display HH:MM:SS AM/PM - Time should be changed by board's key pad or SW 2, SW 3, SW 4, SW 5 - 2nd LCD line must allow an editable message This needs to be done in assembly (.asm ) code warrior

    €132 (Avg Bid)
    €132 Gns Bud
    2 bud

    It is a simple pcb with a teensy microcontrollers and some relays. Need help routing the pcb board

    €315 (Avg Bid)
    €315 Gns Bud
    17 bud

    I want a coder to code PHP control panel for my c++/asm console application, ill provide the source code of my app so you can make some edits to apply the communication between user and panel. Requirements : -Experience with sockets. -Requests between client and server.

    €138 (Avg Bid)
    €138 Gns Bud
    17 bud

    We are looking for a programmer with experience with ATMEL SAMD21 microcontrollers. Do you have a dev kit to test your program at your side? Do you have VERY good skills of programming SAM in ATMEL STUDIO 7? Then please contact us for long term jobs as freelancer with many projects.

    €71 (Avg Bid)
    €71 Gns Bud
    4 bud

    Looking for someone who can make me a simple coded in C/C++/ASM(Runtime/Scantime). Crypter also has to have execution delay option. GUI needs to be as simple as possible( like couple checkboxes for options and buttons to select a file and to crypt it). Along with a crypter I also need a source code for it, since i'll need to refud it sometimes. The

    €27 / hr (Avg Bid)
    €27 / hr Gns Bud
    6 bud

    Looking for a code to develop the application, I have most of the logic and have the final product, critical requirement is to interface t...have most of the logic and have the final product, critical requirement is to interface the code with the hardware. The project may require knowledge of appropriate microcontrollers to run the software on a PC.

    €298 (Avg Bid)
    €298 Gns Bud
    33 bud

    Type in the AddSub3.asm program and get it working. Then add something else that is interesting to it. Tell me what you added to the program. This program will let you experiment with addition, subtraction, increment, decrement and negate commands. You can do some more arithmetic in your version of the program.? TITLE Addition and Subtraction INCLUDE

    €26 (Avg Bid)
    €26 Gns Bud
    12 bud

    As the title says, I am looking for someone proficient in microcontrollers like Arduino and Adafruit and microcomputers like RPi and Android Boxen. I need a series of small projects assembled and tested. I do not care if your expertise is hobby based, as long as you know what you are doing. Resume is not necessary, I can figure out what you know in

    €12 / hr (Avg Bid)
    €12 / hr Gns Bud
    15 bud

    I have a 2500 words simple Economic asm which have to be done within 10 days. This is a resit task so Its highly important to check it for plagiarism so as to be used without worries so I can pass!

    €31 (Avg Bid)
    €31 Gns Bud
    26 bud

    hi, I m doing microcontrollers based pixel (full color or rgb ) led controllers for matrix pattern preparations. I m using manual graphs for preparing matrix designs. so I m in need of software , in which I need to define row and columns initially, then I need to draw matrix patterns using 7 colors as color picker and drawing it and has to do right

    €233 (Avg Bid)
    €233 Gns Bud
    2 bud

    I want to paraphrase a 10000 words asm on Economic in 3 days. Its highly important to keep the original meaning as close as possible and to check it for plagiarism so as to be used without worries!

    €118 (Avg Bid)
    €118 Gns Bud
    31 bud

    Hi My Name is Andreas and Im currently studying system eneering. We have a little project in microcontrollers and Im looking for someone to work it out for me. Facts: We need to built a door lock using a PIC16F887 programmed with c We have a standart input box Nbr 0-9, A-D, * and # We have a LCD display directly on our board to visualize it.

    €124 (Avg Bid)
    €124 Gns Bud
    12 bud

    ...can be USB or something else -TBD. Current hardware works up to 115200 bit/second. REQUIREMENTS: Previous knowledge and experience with Texas Instruments MSP430 line microcontrollers (5 years). Embedded C (5 years). Understand and follow assembler code. Programing in C++ (3 years) Low power design. Should be able to use various low power modes of MSP430

    €1191 (Avg Bid)
    €1191 Gns Bud
    18 bud

    hi, need a coder HTTP Controller will be coded with C++/C with asm(optional) with PHP admin panel to control the client's machines. it should work from Windows XP to Windows 10 x64. More details will be sent via text file about the panel and the executable file.

    €1099 (Avg Bid)
    €1099 Gns Bud
    12 bud

    hi, need a coder HTTP Controller will be coded with C++/C with asm(optional) with PHP admin panel to control the client's machines. it should work from Windows XP to Windows 10 x64. More details will be sent via text file about the panel and the executable file.

    €599 (Avg Bid)
    €599 Gns Bud
    10 bud

    hello, need a coder HTTP Controller will be coded with C++/C with asm(optional) with PHP admin panel to control the client's machines. it should work from Windows XP to Windows 10 x64. More details will be sent via text file about the panel and the executable file.

    €376 (Avg Bid)
    €376 Gns Bud
    12 bud

    ...packages Permission modification. File locking Object access control lists Account privileges Rootkit techniques Usermode. Kernel mode' Ad-ware file will be coded with CPP/C / or asm it should work on all windows versions and at least for Chrome, Firefox and Internet Explorer browsers. the executable file should be connected with php panel. Admin Panel:

    €916 (Avg Bid)
    €916 Gns Bud
    6 bud

    ...packages Permission modification. File locking Object access control lists Account privileges Rootkit techniques Usermode. Kernel mode' Ad-ware file will be coded with CPP/C / or asm it should work on all windows versions and at least for Chrome, Firefox and Internet Explorer browsers. the executable file should be connected with php panel. Admin Panel:

    €1334 (Avg Bid)
    €1334 Gns Bud
    7 bud

    Building a pan/ tilt camera setup Reciever -Using two standard servos 6v, -One for pan left/right continious 360* -One f...continuous servo as i have built a slip ring that will provide 12v without cables twisting I will need programming of atmel Microcontroller that is used Needed Code for microcontrollers Pcb diagrams Pcb manufacturing files

    €127 (Avg Bid)
    €127 Gns Bud
    1 bud

    ...codigos fuentes. Tengo por sabido que desensamblando la ROM que he adjuntado en la descripcion con el IDA PRO HEX RAYS version FULL, se puede pasar la informacion de la ROM a .asm (lenguaje ensamblador) y luego con el programa RECSTUDIO 4 pasarlo a lenguaje C. Vereis señores lo se porque un amigo mio ingeniero tambien, muy habil,ha sido capaz de hacerlo

    €184 (Avg Bid)
    €184 Gns Bud
    4 bud

    ...announcement is going to be most likely orientative in order to get some contacts and discus later. Some important knowledges to keep in mind: Reversing, Process dll injection, ASM, Low C assembler level, understanding about memory reading / writing with offsets interpretation and hooks and then being able to build functions in order to manage all the information

    €7 / hr (Avg Bid)
    €7 / hr Gns Bud
    5 bud

    ...announcement is going to be most likely orientative in order to get some contacts and discus later. Some important knowledges to keep in mind: Reversing, Process dll injection, ASM, Low C assembler level, understanding about memory reading / writing with offsets interpretation and hooks and then being able to build functions in order to manage all the information

    €9 / hr (Avg Bid)
    €9 / hr Gns Bud
    6 bud

    I need you to develop some software for me. I would like this software to be developed . Embedded C programming for microcontrollers

    €104 (Avg Bid)
    €104 Gns Bud
    3 bud

    I need you to develop some software for me. I would like this software to be developed . Embedded c programming for microcontrollers

    €7 - €19
    €7 - €19
    0 bud

    Looking for an embedded SW engineer who can make design and modelling of an application at abstract level. I looking to redesign an automotive protocol implementati...interface protocols such as I2C, SPI, CAN, and USB. - experience how to make a software work across multiple platforms such as Linux, RTOS (e.g. RTX/uCOS) and bare metal microcontrollers

    €171 (Avg Bid)
    €171 Gns Bud
    9 bud

    Need to convert ASM code in C++ to works in X86 and x64 platforms

    €27 (Avg Bid)
    €27 Gns Bud
    5 bud

    The program consists of a C++ and .asm file. Only modifications to the .asm file is [login to view URL] essense, it is a short program to control a snake using keys and mouse. In short, it is similar to a snake game. Arrays must be used for the program. More details will be given later.

    €59 (Avg Bid)
    €59 Gns Bud
    6 bud

    The program consists of a C++ and .asm file. Only modifications to the .asm file is [login to view URL] essense, it is a short program to control a snake using keys and mouse. In short, it is similar to a snake game. Arrays must be used for the program. More details will be given later.

    €122 (Avg Bid)
    €122 Gns Bud
    9 bud

    ADEPT in programming using the Atmel Studio IDE. EXPERIENCE in using Atmel /Microchip based microcontrollers to control motor controllers/ switches/and sensors

    €166 (Avg Bid)
    €166 Gns Bud
    27 bud