Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Færdigheder
Sprog
    Job-status
    386 freelanc e3d jobs fundet, i prisklassen EUR

    crawler for darkside

    €226 (Avg Bid)
    €226 Gns Bud
    1 bud

    I'm seeking a seasoned E3D Aveva Designer to expertly undertake the following tasks: - Creation of intricate 3D models - Comprehensive electrical design - Detailed equipment layout The final output should be delivered in DWG format. It is also essential that the designer has a solid understanding and can apply ASME standards throughout the project. Prior experience in conforming to these standards and evidence of previous work in 3D modeling, electrical design and equipment layout will be viewed favorably.

    €326 (Avg Bid)
    €326 Gns Bud
    53 bud

    I am looking for a freelancer who can customize the PML in E3D for a spool fabrication project. requirement is in the spooler module. Design: The client has a specific design ready for the spool fabrication, so the freelancer will need to work with this design to customize the PML in E3D accordingly. Timeline: The client has a tight deadline for this project and requires it to be completed within a week. Ideal Skills and Experience: - Strong knowledge and experience in PML customization in E3D - Proficiency in color customization, design customization, and functionality customization - Ability to work with a specific design provided by the client - Excellent time management skills to meet the tight deadline of completing the project within a week.

    €122 (Avg Bid)
    €122 Gns Bud
    2 bud

    Hello! I am looking for an experienced freelancer to work with me on a project for customising PML in E3D. Specifically, I need some new features to be added, and I would prefer to have the project completed within one to two weeks time. I have a general idea for what the new features should be, but do not have any specific examples or references, so I am open to creative suggestions from the freelancer. If you have the necessary experience working with E3D and PML customisations, then I'd love to work with you on this project!

    €117 (Avg Bid)
    €117 Gns Bud
    3 bud
    3d printer parts Udløbet left

    I am in need of assistance with 3D printer parts, specifically the extruder. I am looking for a parts cooling fan with a mount for a dc42 IR probe. The fan shroud I would like is similar to the attached but to suit an E3d Revo micro Thanks

    €57 (Avg Bid)
    €57 Gns Bud
    42 bud

    I am in need of assistance with 3D printer parts, specifically the extruder. I am looking for a parts cooling fan with a mount for a dc42 IR probe. The fan shroud I would like is similar to the attached but to suit an E3d Revo micro Thanks

    €54 (Avg Bid)
    €54 Gns Bud
    26 bud

    Project Description: I am looking for a skilled 3D modeler who can create a 3D model in PDMS/E3D from a P&ID. Complexity Level: The model required is at an intermediate level of complexity. Engineering Knowledge: I am not sure if engineering knowledge needs to be incorporated into the model. Software: The 3D modeling software to be used is AVEVA-PDMS. Ideal Skills and Experience: - Proficiency in AVEVA-PDMS and experience in creating 3D models in this software - Knowledge of P&ID interpretation and ability to translate it into a 3D model - Understanding of engineering principles and ability to incorporate engineering knowledge into the model if required

    €76 (Avg Bid)
    €76 Gns Bud
    22 bud

    2. make the pass type - itemsperrow - 3, redesign: card 3. login - `user - can't see company on the field after click 4. the content overflowing - facility, check if it works - creating makes crush 5. membership update in the database once we change it on admin panel 6. admin/gym/gym manager/trainder/freelance ...4. the content overflowing - facility, check if it works - creating makes crush 5. membership update in the database once we change it on admin panel 6. admin/gym/gym manager/trainder/freelance trainer date validation in freelancer classes / adding intial overlay - no map for admin 7. end - user eding page is crushed once we login as a gym owner / gym manager / trainer / freelancer trainer 8. freelanc trainer - show only his classes remove trainer selection on creat...

    €21 (Avg Bid)
    €21 Gns Bud
    16 bud

    We are advertising company and we have 56 advertising screens and we need freelanc naked eye 3D video creator by for project by hours

    €54 / hr (Avg Bid)
    €54 / hr Gns Bud
    18 bud

    Hi there, I'm looking for a freelance FDM 3D printing copy writer to support the marketing team E3D. Part of our brand identity is being known as a thought leader and to upkeep this we need to be producing high-quality, regular content on various 3D printing topics, this could be blog breakdowns of the technology that we've created right through to talking about the most popular 3D printed items on TikTok. The ideal candidate is someone who's very passionate about 3D printing, has ideally heard of E3D and knows of our presence/history in the industry, and has a fantastic highly technical flair with their writing. SEO optimisation is crucial, my team will be able to support on key words. We're looking for someone to produce 2-4 pieces of content per month...

    €27 / hr (Avg Bid)
    €27 / hr Gns Bud
    31 bud

    ...trouble figuring it out so I need to hire someone to do it for me in a way I can upload it with my slicer software. The body of my 3D printer is all original Creality CR-10 S5 which is the biggest I could find which has a 500 mm by 500 mm by 500 mm build volume. I put in Big Tree Tech SKR mini E3 V3 mainboard, Micro Swiss direct drive feeding, Dragon fly hot end with cartridge style thermistor like e3d that can read temperatures over 500 Celsius with 12 volt 70 watt heating cartridge to get over 500 Celsius temperatures and upgraded hotbed to get up to 180 Celsius. I upgraded my 3D printer so I can 3D print in all filaments on market and even make my own by recycling plastics, polymers and rubber. I need marlin firmware to run my configuration and have no temperature limits and ...

    €579 (Avg Bid)
    €579 Gns Bud
    2 bud

    ...trouble figuring it out so I need to hire someone to do it for me in a way I can upload it with my slicer software. The body of my 3D printer is all original Creality CR-10 S5 which is the biggest I could find which has a 500 mm by 500 mm by 500 mm build volume. I put in Big Tree Tech SKR mini E3 V3 mainboard, Micro Swiss direct drive feeding, Dragon fly hot end with cartridge style thermistor like e3d that can read temperatures over 500 Celsius with 12 volt 70 watt heating cartridge to get over 500 Celsius temperatures and upgraded hotbed to get up to 180 Celsius. I upgraded my 3D printer so I can 3D print in all filaments on market and even make my own by recycling plastics, polymers and rubber. I need marlin firmware to run my configuration and have no temperature limits and n...

    €488 (Avg Bid)
    €488 Gns Bud
    17 bud

    Some potential work coming up, looking for freelancers to support the projects who have experience in these tools can model both from pointcloud and drawings as well

    €7 (Avg Bid)
    €7 Gns Bud
    1 bud

    Looking for candidate who has good knowledge of development of catalogue in PDMS and E3D

    €369 (Avg Bid)
    €369 Gns Bud
    2 bud
    Update brochure Udløbet left

    We are looking for a freelanc who can update both as photos and texts an old catalog of ours. The person needs to create a standard of a series of brochures to be used for other catalogs. Artistic ability and photo data base is required.

    €100 (Avg Bid)
    €100 Gns Bud
    77 bud

    Hi Gaurav N., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Want my pipe specs to be built in e3d

    €6 / hr (Avg Bid)
    €6 / hr Gns Bud
    1 bud

    We need to fix bugs and add some features to existing app . Looking for 2-4 yrs experience freelanc

    €4 / hr (Avg Bid)
    €4 / hr Gns Bud
    7 bud

    Engineering Project setup Data Integration with Aveva P&ID, Aveva Instrumentation and E3D. and Datasheet Management

    €4 / hr (Avg Bid)
    €4 / hr Gns Bud
    1 bud

    We are facing E3D automation errors to issue drawings automatically from 3D model.

    €336 (Avg Bid)
    €336 Gns Bud
    1 bud
    Trophy icon 3D Logo design Udløbet left

    Looking for 3D designers to ENHANCE (more complex) the attached draft logo design capturing alphabets "E3D in a connected shape that can be 3D printed as single object". Looking for "SIMPLE yet Artistic effects" to make it look more appealing. Final output needed as both 3D printable stl file and 2D image with company "Expedite3D"

    €19 (Avg Bid)
    Garanteret
    €19
    40 indlæg

    I would like you to design an Arduino project where I can remotely run a stepper via Bluetooth from iPhone using the ''Blynk'' app to controller the stepper motor going forward/back, spe...Bluefruit LE SPI Friend () B- Bluefruit LE - Bluetooth Low Energy (BLE 4.0) - nRF8001() 4- Power Supply -- I would like to use two of these to get enough volts -parallax power pack 28988 to power everything (). 5- Nema-17 motor () You must provide a timeframe to provide each milestone below: 1- Schematics and BOM 2- Sketch to test and run. 3- Blynk interface setting and for scripts as mentioned above.

    €128 (Avg Bid)
    €128 Gns Bud
    6 bud

    We are creating freelancing platform similar to freelanc-ers/ u-p-work. We are looking for team/agency/talented developers for the projects. We want to know frontend/backend technologies you can suggest, the frameworks and architecture for very large scale users. Please share your ideas from programming languages, databases/design, system architecture to your past experience in the quote. Starting from web-application to mobile development and task tracking feature have a series of work for you. We want to partner for long term ongoing development so if you think this is a right project for you and your team, please place your bid. Thanks, 9 Lab team.

    €20 / hr (Avg Bid)
    €20 / hr Gns Bud
    35 bud

    Hi, im looking freelanc trainer in Bangalore ( nearby Rajajinagr or Malleswaram or Vijaynagar) who can teach me complete digital marketing.

    €3 / hr (Avg Bid)
    €3 / hr Gns Bud
    3 bud

    Soy Jose Loaiza, Diseñador Mecánico en GYM Ingeniería SAS, desde Colombia. Necesitamos una tutoria presencial o a distancia para el manejo del software AVEVA E3D y su respectivo componente administrativo, el AVEVA Administration. Necesitamos adelantar esa labor pedagógica que nos permita aprender los conceptos básicos y continuar con el desarrollo y modelado de nuestro proyecto.

    €23 - €46 / hr
    €23 - €46 / hr
    0 bud

    You have to start right away since we are in a very tight schedule. Must have a good PC configuration to handle up to 20000+ particles. Please do bid only you have a good config PC, can work now else you may get reported. New freelancers with skill also welcome to bid. Write E3D in your bid to consider.

    €137 (Avg Bid)
    €137 Gns Bud
    7 bud
    Happy Holiday Card Udløbet left

    I have excellent experience in logo and banner design. I can create high quality design in a few time. I have confident that I will do your work very well. I hope you would like my work and you will give me a good feedback which is very important for my future carrier in Freelanc er. Here I attached some of my logo and banner design projects. Hope you would like those. If you want to see more sample of my work you can visit my site

    €23 (Avg Bid)
    €23 Gns Bud
    33 bud

    Hello, we are searching for a hardworking new freelance to assist in extracting content from a PDF files and also type very fast. The files will be entirely written in English. We want candidate that can speak and write in English perfectly because we want to have 100% accurate result without any mistake. This project is very easy and simple and does not affect your current task or project. Candidate must be able to write perfectly and new freelancer are most highly welcome. And the rate is $35/hour with other good benefits.

    €19 / hr (Avg Bid)
    €19 / hr Gns Bud
    60 bud

    You thieved me Unfortunately, I took advantage of my lack of knowledge of the steps well, I now know this is a case of theft, but I will warring you in this site and another site (#freelanc #freelancer #freelancing #upwork #fiverr #guru #mostaql #khamsat #ikhedmah) i have good friends and I will tracking you everywhere

    €220 (Avg Bid)
    €220 Gns Bud
    1 bud

    ...and evaluate equipment performance. • Generate drawing transmittals as may be required. • Maintain accurate drawing records by entering and maintaining drawing database information. • Self check all work and check the work of others as required. • Perform other duties as assigned. Required Skills Optional Responsibilities but not required: • Provide technical support for GIS (ArcMap), AVEVA P&ID, E3D & AutoCAD/AutoCAD Civil 3D 2016 applications. • Knowledge of Windows Active directory procedures & polices, Familiar with databases tables, access and roles. • Familiar with application testing, application enhancement process. Python, C++, VBA ecosystem • Experience with 3D modelling design procedures, Plotting, Laser scan technolo...

    €46 / hr (Avg Bid)
    Lokal
    €46 / hr Gns Bud
    1 bud
    Trophy icon Drawing the 3D printer in Fusion 360 Udløbet left

    The task is to draw my design of 3D printer in Fusion 360 I supply the dimension of all components, and Im asking to draw the design in Fusion 360. Basically its a very simple design. Very common in CNC world. The 3D printer looks like this: Picture , Picture2. jpg Everything is standard (E3D ecosystem). Dual extrusion systém, direct drive, all metal construction. I will use these components: X and Y axis will be 500 mm long, Z axis will be 400mm long I already have the set, so all dimensions will be sent. The basic support of the printer is sheet metal. Letter „L“ shaped On the bottom of L shaped sheet metal place the guide rails, and lead screw. On the guide rails add the metal

    €93 (Avg Bid)
    €93
    7 indlæg
    Project for Oleg B. Udløbet left

    Bonjour e3d, j’ai remarqué votre profil et je voudrais vous attribuer mon projet. Nous pouvons discuter des autres détails.

    €232 (Avg Bid)
    €232 Gns Bud
    1 bud
    Project for Oleg B. Udløbet left

    Hi e3d, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    €232 (Avg Bid)
    €232 Gns Bud
    1 bud
    Project for Oleg B. Udløbet left

    Hi e3d, I have one php file that I need to work for a smaller message form... I have one working correctly now, however for a smaller form I'm getting a "supplied email address" error when sending from inside of the website contact form. I'm guessing if the working php file is reduced to match the different message box options that it should work correctly, however I'm not 100% sure. Please let me know your thoughts = ) thank you.

    €9 / hr (Avg Bid)
    €9 / hr Gns Bud
    1 bud
    Project for Oleg B. Udløbet left

    Здравствуйте, e3d! Я обратил внимание на ваш профиль и хотел бы предложить вам свой проект. Мы можем обсудить детали в чате.

    €232 (Avg Bid)
    €232 Gns Bud
    1 bud

    We do have to do a lot changes and amendmends on our Prestashop webshop before going live. Amendmends of bought modules, amendmends in CSS, amendmends in the code and many more.

    €180 (Avg Bid)
    €180 Gns Bud
    3 bud

    Веб-сервис «Личный кабинет сотрудника», с доступом из браузера. Возможность регистрации в личном кабинете сотрудников (возможность создавать поля для заполнения), авторизация с помощью электронной почты. Возможность экспорта данных для администратора, загрузки информации для отображения в личном кабинете (отработано часов, з/п итп)

    €185 (Avg Bid)
    €185 Gns Bud
    1 bud

    ...compositions are 4096x2048 for each eye (so for stereo its 4096x4096) The source footage consists of 8192x8192 .mp4's with 2048 proxys (do not render the proxys should be set in output settings) The duration's are 1:49, 1:26, 0:54 & 0:09 seconds The last shot is short but has some very sequences while the others have minor 3D assets but are quite long in duration. I can't work with E3D at the moment so some of these shots still need a little visual attention (some parts could do with better lighting, masking etc..) I'm extra likely to work with someone who would be into enhancing the visual effects already in the scene and am very happy to collaborate if they want to put their own creative spin on them however my budget is dried up so I can o...

    €83 (Avg Bid)
    €83 Gns Bud
    6 bud

    Our company needs content writer who can bi d on freelanc er. Anybody who wins the bi d and got awarded can give all of the work to us, we have a team of all the experienced and professional content writers. Your work is so simple..... You have to bi d. If you got awarded you can give all work to us. We will do all needed demands and work. You will get 50% commissio n.

    €78 (Avg Bid)
    €78 Gns Bud
    24 bud
    Project for Oleg B. Udløbet left

    Hai e3d, saya melihat profil Anda dan ingin menawarkan Anda proyek saya. Kita bisa diskusikan setiap detailnya di kotak obrolan.

    €80 / hr (Avg Bid)
    €80 / hr Gns Bud
    1 bud

    Développement d'un site institutionnel développé sous Contao.

    CMS
    €427 (Avg Bid)
    €427 Gns Bud
    8 bud

    I'm building a 3d printer The machine is a corexy design using the MKS Sbase v1.3 smoothieware clone controller. I've everything working correctly except for the hotend temperature. The hotend does not reach the desired temperature, it is always way low. The hotend is a J-head V6 E3D Hotend 1.75mm/0.4mm Nozzle Bowden type. The thermistor is NTC3950. The system power 24v. In the file I've tried using the setting, the Steinhart Hart and the temperature_control.hotend.rt_curve setting. From experimenting with settings using a laser thermometer and ohm meter, the Steinhart Hart curve is very steep. I'm thinking I need to make a circuit give the Steinhart Hart more slope at higher temperatures but have no idea how

    €160 (Avg Bid)
    €160 Gns Bud
    2 bud

    Web scraping project for @e3d $250/M

    €3506 (Avg Bid)
    €3506 Gns Bud
    6 bud

    These are the videos that we need Please let me know the quote and the Turn around time for the same.

    €28 (Avg Bid)
    €28 Gns Bud
    9 bud

    These are the videos that we need Please let me know the quote and the Turn around time for the same.

    €6 (Avg Bid)
    €6 Gns Bud
    1 bud
    rmcreatemsprodTEST2 Udløbet left

    Get bids from skilled freelancers within minutes. View freelancer profiles and ratings, then instantly chat with them. With only a 3%* commission fee, your favorite freelancer can start working for you today. Pay the freelanc

    €5 / hr (Avg Bid)
    €5 / hr Gns Bud
    1 bud
    Project for e3d Udløbet left

    can u make a software to scrape data from truecaller website

    €56 (Avg Bid)
    €56 Gns Bud
    1 bud
    Project for e3d Udløbet left

    Hi e3d, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    PHP
    €199 (Avg Bid)
    €199 Gns Bud
    1 bud

    Require Magento 2 freelanc developer from Kolkata, who can work full time. Please contact with your M2 portfolio.

    €482 (Avg Bid)
    €482 Gns Bud
    10 bud
    Project for e3d Udløbet left

    Hi e3d, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    €165 (Avg Bid)
    €165 Gns Bud
    1 bud
    Project for e3d Udløbet left

    Hi e3d, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    €180 (Avg Bid)
    €180 Gns Bud
    1 bud