Embedded projects biddingJobs

Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    3,606 embedded projects bidding jobs fundet, i prisklassen EUR

    We are developing an embedded controller for a battery inverter system that have a PIC32 controller programmed in C. The embedded controller hardware are built and have been used for different applications since 2002, and it is in need of a software update with new main functions for this new application.

    €497 (Avg Bid)
    €497 Gns Bud
    23 bud

    Requiring experienced electronics engineer/embedded software developer to assist with further design and development of FPGA system for synchronised communication with ADC's and DAC. The system is to be used in a precision materials testing instrumentation design. The ADC's to be used are the AD7768 (x2) and the DAC is AD5790. The DAC is to operate

    €514 (Avg Bid)
    €514 Gns Bud
    5 bud
    Embedded C error detector -- 2 5 dage left
    VERIFICERET

    Hello, I have number of code which have error. I want embedded C coder who detect error and give me error free code who then can generate hex code. The code is in MPLAB IDE.

    €5 / hr (Avg Bid)
    €5 / hr Gns Bud
    5 bud

    We have 4 properties wh...also ok. The widget will be embedded into our Wix site (iframe) and will be mobile friendly. If any development is needed on a seperate hosting (running code or scripts), it shall be done on our PHP hosting. Please send a message saying 'I have iCAL experience' so we understand that you are not blindly or robotic bidding

    €44 (Avg Bid)
    €44 Gns Bud
    1 bud
    Embedded Systems 3 dage left
    VERIFICERET

    Design hardware and firmware for GPS tracker and IoT application. Strong hardware engineering background is required.

    €1339 (Avg Bid)
    €1339 Gns Bud
    32 bud

    I want to build a prototype which does the following things: 1) position detection via GPS 2) transmission of position data to remote server 3) data connection on GPRS - GSM - 3G-4G mobile network 4) installation on a mobile offroad vehicle powered by 12V 5) continuous (1 x minute) weight detection (low precision required) from a load cell from 0 to 50 kg 6) detection of 8 opto-isolated digital in...

    €1138 (Avg Bid)
    €1138 Gns Bud
    17 bud

    The company offering this job is a technology development company. We would like to translate our embedded software projects in a way that it shows on the one hand our profound technical competency but on the other hand makes the contents accessible and easy to understand. Clear thinking. Clear writing. We are looking for an English native speaker who

    €882 (Avg Bid)
    €882 Gns Bud
    33 bud

    I want to get Embedded (HTML) games for my personal website

    €376 (Avg Bid)
    €376 Gns Bud
    6 bud

    I want to build a prototype which does the following things: 1) position detection via GPS 2) transmission of position data to remote server 3) data connection on GPRS - GSM - 3G-4G mobile network 4) installation on a mobile offroad vehicle powered by 12V 5) continuous (1 x minute) weight detection (low precision required) from a load cell from 0 to 50 kg 6) detection of 8 opto-isolated digital in...

    €409 (Avg Bid)
    €409 Gns Bud
    7 bud

    Hello! we have embedded software project who was designed on IAR. At the moment, we got some warnings and errors when we try to open project file. We need experienced about IAR and need to help about fix the problems

    €131 (Avg Bid)
    €131 Gns Bud
    4 bud

    Required Java Developer which is having good experience in - Frontend and backend IOT could platform AWS, Google cloud, Azure Socket TCP/IP MQTT

    €356 (Avg Bid)
    €356 Gns Bud
    5 bud
    Embedded system Udløbet left

    I need you to develop some software for me. I would like this software to be developed for Windows using C or Python

    €7 - €13 / hr
    €7 - €13 / hr
    0 bud

    Looking for a developer well-experienced in C / C+ / Java / php / MySQL. Describe your coding experience and the previous apps that you have developed. Start is immediate, and you will be expected to work full-time on this project until completed (i.e., work is expected for 40 hours per week until project completes). You will need to be online to instant message for the 8 hours per day that you wo...

    €7 / hr (Avg Bid)
    €7 / hr Gns Bud
    12 bud

    need a software engineer to work with us developing ethernet, wifi, json and SDcard. optimising code for speed and volume of packets used for an ART-NET processing node, that will be implemented in an LED lighting control system.

    €47 / hr (Avg Bid)
    €47 / hr Gns Bud
    25 bud

    We required Arduino based embedded Queue Token printing Application Requirements: 1. Arduino Module Connected with printer 2. When user Pressed Get token button then arduino create http request and send to server for token response after that successful get response send to printer for token receipt. Note: Please at least one visit to our company for

    €191 (Avg Bid)
    €191 Gns Bud
    9 bud

    Trying to understand if this is possible on Wix. I need a form setting up which collects information from new registrants. The information is then stored in a database, which is searchable by our members. Think - LinkedIn. Alternatively, if this isn't possible, I'm open to proposals for someone to develop a website using my pre-existing design.

    €1179 (Avg Bid)
    €1179 Gns Bud
    19 bud

    I am looking for an occasional consultant to assist with configuring uboot and Yocto for various embedded systems that I work with. The initial task will be quite simple, I have an AWS instance that you can login to, modify the appropriate bitbake recipes in Yocto to make u-boot delay its startup from 3 seconds to 10. If work on this relatively simple

    €31 / hr (Avg Bid)
    €31 / hr Gns Bud
    20 bud
    embedded software Udløbet left

    Develop RTOS based firmware for ARM based board

    €340 (Avg Bid)
    €340 Gns Bud
    17 bud

    I need reverse engineering support. I have an electronic card module and with software. Most of software parts are open source already but small parts are not. Software was designed on IAR 6.7 and module has STM32 and ARM Can you provide to open source part and edit/clean/revise codes and be ready to compiler the software for using?

    €165 (Avg Bid)
    €165 Gns Bud
    8 bud

    We want a service of Fpga card design and embedded software

    €1078 (Avg Bid)
    €1078 Gns Bud
    15 bud

    Add button, led y buzzer to microcontroller

    €29 (Avg Bid)
    €29 Gns Bud
    12 bud

    We are a dairy company in Egypt and we want our website to provide an indexed search module for whole food companies in the country for free, we need higher google ranked matches.

    €1941 (Avg Bid)
    €1941 Gns Bud
    46 bud

    ...will host Free and Premium Videos. To access the premium videos I would like you to need a password that can be used only by that person. No Sharing. The videos should be embedded and not be able to download. The password should also expire after a set amount of days. If you can make the site look better that is also a plus. I would like to have

    €163 (Avg Bid)
    €163 Gns Bud
    27 bud

    I have a web app (NodeJS, imx6 processor, webRTC, gstreamer) that works on my personal computer but it doesn't on my embedded system. I'm searching for someone to solve this

    €584 (Avg Bid)
    €584 Gns Bud
    21 bud

    Hi I am looking to offload a embedded system project which requires deep understanding of a) Hardware board design b) FPGA/RTL Developer c) Linux device driver expert d) software expert e) Signal processing expert

    €34341 (Avg Bid)
    €34341 Gns Bud
    13 bud

    Looking for a developer well-experienced in C / C+ / Java / php / MySQL. Describe your coding experience and the previous apps that you have developed. Start is immediate, and you will be expected to work full-time on this project until completed (i.e., work is expected for 40 hours per week until project completes). You will need to be online to instant message for the 8 hours per day that you wo...

    €5 / hr (Avg Bid)
    €5 / hr Gns Bud
    15 bud
    Embedded system Udløbet left

    projects in embedded system using avr , pic , arduino and raspberry pi

    €131 (Avg Bid)
    €131 Gns Bud
    34 bud
    embedded software Udløbet left

    arm embedded software development microprocessor programming

    €7499 (Avg Bid)
    €7499 Gns Bud
    42 bud

    ...development I.e embedded programming, i need someone who has good experience in embedded development for at least 3 years.I am also a developer, but i would consider myself has a beginner, regularly i will be getting tasks and projects to do.I need someone who can at least spend an hour or 2 in a day to help me out in daily tasks/projects, may be giving

    €11 (Avg Bid)
    €11 Gns Bud
    16 bud

    I have written an application in Labview that I would like to translate to an embedded kind of language (eg. C/C++) to run on a Raspberry Pi or similar device. Multithreading will be necessary to ensure reliable performance. The application monitors a sensor over SPI and given the right conditions records a period of time (including a buffer). It also

    €188 (Avg Bid)
    €188 Gns Bud
    9 bud

    The title say it all. I want the grabbed videos via the embed option of the KVS script to be free of ads. I have contacted the Kernel Team about this and they said: "The feature itself is very easy, having a video page URL make a background call to KVS grabber API and get list of video file URLs from the grabber. Then render this list into page template, even providing ability to switch qua...

    €106 (Avg Bid)
    €106 Gns Bud
    2 bud

    ...cannot be found anywhere on the web. However I could find N61J schematic. On this schematic I found out that the keyboard backlit is controller with a PWM from the IT8570E embedded controller (EC): This PWM goes to a mosfet the mosfet enable/disable the connection of the FPC to ground (5V pin is always connected). By changing the PWM the CPU can vary

    €211 (Avg Bid)
    €211 Gns Bud
    3 bud

    stk600 + atmega2560

    €22 (Avg Bid)
    €22 Gns Bud
    1 bud

    The project consist in the creation of AWS IOT SDK Demo using a linux board as OrangePI or similar. Using the peripherals includeded in the board, we will create a demo presentation sending the sensor (peripherals) data using a 2G-3G modem connection(external board from demo board). These are the requirements: - User Linux board with updated linux kernel and updated drivers - Use python Amazon I...

    €585 (Avg Bid)
    €585 Gns Bud
    12 bud

    A website has a embedded google maps map with markers. When you go over a marker, you see the name of a company with contact details. with one more click you get the email adress and phone. all together there are around 1000 markers. you have to get them and provide me an excel list with all the available company details.

    €22 (Avg Bid)
    €22 Gns Bud
    16 bud

    Hi Embedded E., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    €44 (Avg Bid)
    €44 Gns Bud
    1 bud

    ...serial GSM modems which are no longer supported/available. We would like to utilize Digi Internation ([log ind for at se URL]) TransPort line of cellular routers for simplicity. They are embedded devices which allow running custom python files. I need the device, which normally acts as a cellular gateway, to function as a cellular modem. This task is too small for

    €999 (Avg Bid)
    €999 Gns Bud
    21 bud

    Embedded PCB design ready to be manufacturing and assembly. This PCB will be installed on IP67 Case and it will be used for continues water monitoring under external conditions. It will have: 2 sensors with Isolation, 1 TFT/LCD screen, some buttons, ESP32 or Pycom micro controller, wireless and RF communications, power management for 14500 lithium

    €175 (Avg Bid)
    €175 Gns Bud
    25 bud
    embedded firmware Udløbet left

    I need to develop firmware for testing the wireless communication. I have nRF52840 board and lora gps hat module for raspberry pi. Your task: - Need to connect nRF52840 board and hat module (SPI, UART) - nRF52840 should be received GPS postion and data from LoRa gateway. - nRF52840 should send the data to smart phone via Bluetooth Low Energy (BLE).

    €616 (Avg Bid)
    €616 Gns Bud
    11 bud

    ...scanner. Its running embedded windows xp and so i figured i could put my own program on there instead of using their default program which is ugly and slow. You will need to find out where the program is starting up at (run/runonce/registry/ect) and have an outcome of being able to disable that program from coming up since its embedded windows is locked

    €163 (Avg Bid)
    €163 Gns Bud
    5 bud

    Need help in programming related to embedded systems, specifically sensors

    €114 (Avg Bid)
    €114 Gns Bud
    20 bud

    Specification review documentation as defined per customer Software and System Process • Define and document new SW requirements based on System Requirements and System design documentation • Analyze assigned SW requirements for their design & implementation in the software • Implement software units of assigned SW components according to their design, the SW Requirements Specif...

    €17 / hr (Avg Bid)
    €17 / hr Gns Bud
    14 bud

    Project hardware and skills required: ARM STM32F407VET MCU, STM32Cube library , STM32CubeMX, TrueStudio IDE v.9.2 MS4525DO Airspeed sensor over I2C interface using Interrupt to read data SPI full duplex communication between Master and Slave modules using Interrupt APIs MCU communication with host PC terminal over USB CDC Project based on two modules: Master and Slave communicating over SPI i...

    €355 (Avg Bid)
    €355 Gns Bud
    9 bud

    I have web-site (WordPress) with a lot of embedded YouTube videos with standard YouTube player: [log ind for at se URL] And I don't like that people watching videos and go away to YouTube after clicking on title or YouTube logo. I found this: [log ind for at se URL] As you see, video is streaming from YouTube, but in their own player and you cannot press

    €124 (Avg Bid)
    €124 Gns Bud
    10 bud

    I need you to develop embedded software for me. I would like this software to be developed using C or C++. Controller used is atmega2560, interfacing with GSM and RTC.

    €110 (Avg Bid)
    €110 Gns Bud
    10 bud

    ...of our site. This function is used to find stockists of our product near you, as well as showing all stockists when the map is zoomed out. We already have google maps embedded in our wordpress page, and the design for a search function. We need the search function operational, as well as the ability to add stockist locations as pins to the map

    €24 (Avg Bid)
    €24 Gns Bud
    8 bud

    Position: Embedded Firmware Testing Engineer (Contract for 6 months). Mandatory Skills: Strong C Programming skills. Good knowledge on firmware and device driver verification and Validation for DSP and Microcontroller platforms. Strong debugging skills with JTAG and boot-loader environments. Experience in bring up of peripherals like I2C, SPI, MMC

    €317 (Avg Bid)
    €317 Gns Bud
    8 bud

    fix no sound of embedded video on mobile Vimeo or custom or any solution you can do , I need a sound button on a video on mobile to work, it works on desktop. please contact me for details

    €23 (Avg Bid)
    €23 Gns Bud
    10 bud
    Embedded C Udløbet left

    Microcontroller programming PIC

    €128 (Avg Bid)
    €128 Gns Bud
    37 bud