Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    4,670 embedded c project jobs fundet, i prisklassen EUR

    ...function and commands with one touch finger print authentication via phone touch key via app. Integrated in the software/program is a dynamic QR code authenticator which can be embedded on web platforms in order to execute commands and process swift payments via scan & fingerprint authentication. It’s an app/software that can be integrated on cross functional

    €189 (Avg Bid)
    €189 Gns Bud
    6 bud

    I'm looking to develop and manufacture a GPS pointer to point to a coordinates already programmed in the device and has LED lights, is embedded in cloth.

    €435 (Avg Bid)
    €435 Gns Bud
    12 bud

    I am rupesh from RLT Instrumentation pvt ltd, We need one embedded freelancer to teach us, please (Removed by Freelancer.com admin) My location Chennai, India, PIn code: 603101.

    €187 (Avg Bid)
    €187 Gns Bud
    8 bud

    I am making robot on two wheels.I am using mpu6050(6dof), two dc 5v motors and arduino uno. I need arduino code for my robot.

    €15 (Avg Bid)
    €15 Gns Bud
    4 bud

    I need to build a multivariate normal cdf calculator with Excel (with a Macro). This Excel needs to be able to prompt the u...marginal normal distributions and correlation coefficients. The output is the cdf of the multivariate normal distribution. Your comments on this project is greatly appreciated. Statistical knowledge in this project is a must.

    €123 (Avg Bid)
    €123 Gns Bud
    30 bud
    embedded C++ Udløbet left

    ...small but interesting C++ source code that I would like an embedded C++ dev to look at basically ,project is two parts; 1) is run the following command from command line in linux and build a module. 2) second part is to config the source code to be build and run from in IDE. I will help with introduction of the code and project...this is very important

    €115 (Avg Bid)
    €115 Gns Bud
    10 bud

    Software/ Firmware Projekt in mehreren Stufen: (Konstruktion und Elektronik wird von uns übernommen) 40 Drucksensoren (Widerstands-Matrix mit 5x8 Stück ) sollen über eine RGB LED Matrix (ebenso 5x8) ausgelesen werden. Es wird sowohl Druckintensität (3 Stufen: grün/gelb/rot) als auch Position wiedergegeben. (siehe Skizze) Stufe 1.) Umsetzung mit vereinfachter hardware. E...

    €497 (Avg Bid)
    NDA
    €497 Gns Bud
    6 bud

    ...www.loqed.com. We are looking for an embedded software engineer that can develop the firmware for our "bridge", a device that helps connects the Loqed Smart Lock to the internet. The bridge is based on the ESP32 chip (or another integrated BLE/WiFi module). The protocol has already been defined. ROUGH PROJECT DETAILS - The bridge should connect to

    €30 / hr (Avg Bid)
    €30 / hr Gns Bud
    27 bud

    Requirements Mainboard: - Wifi - Low energy BT4.1 - 8DO, 4AI configured in a given geometry - 7inch touchdisplay (R or C) - rechargable battery, USB B micro to recharge - whole assembly less than 15mm high

    €1401 (Avg Bid)
    €1401 Gns Bud
    9 bud

    ...to have the similiar/exact button,checkbox, modal design in C# forms. This project is nothing about web, php, asp.net. No functionality needed at all. Just the design and look. Project will work in a desktop application, not in any web related service. Lets say I added a button into a c# winform application, I just want to design it. Then some

    €70 (Avg Bid)
    €70 Gns Bud
    44 bud

    Task : To clear the errors in an Embedded C code written in MPLAB X for PIC16F microcontroller. I have coded a program to implement an IEC standard for Lighting Systems. What will share with you: 1. Test report with error analysis, 2. Normative references (IEC test procedure) 3. Program written in Embedded C 4. Some recommendations to clear the

    €104 (Avg Bid)
    €104 Gns Bud
    31 bud

    I have an open source C++ software project that I need a small modification to make: if you truly under stand programming in C++ it is an hour job: Here are the things that need to be done: Add an outPut logs to an exiting source code module: Compile and build source code to run in code block. The above are the two main thing that need to get

    €83 (Avg Bid)
    €83 Gns Bud
    32 bud

    Requires developing an embedded systems hardware and firmware for it to control 4 components with a motor. one RPI will be used as Transmitter/Controller, 2nd RPI will be used as Receiver/Main systems board, all 4 components to be controlled are on main board. Communications/Control will be done using 3 modes, Wi-Fi, Bluetooth and RF from Transmitter

    €306 (Avg Bid)
    €306 Gns Bud
    31 bud

    Hello, I've embedded an iframe using Wordpress' Advanced iFrame plugin. I need the iframe to load in a specific location. Both sites are mine.

    €20 (Avg Bid)
    €20 Gns Bud
    23 bud

    Set up a server which has virtual IP then the IOT devices can visit it and do Over The Air firmware update.

    €112 (Avg Bid)
    €112 Gns Bud
    5 bud

    Hello, I am working on an automotive project that deals with S32K144EVB board. I am using this development board to fetch data from my controller using CAN-bus Protocol. Please don't bid since this is gonna be a challenging project and i dont want to spend time with less experienced people. Hi, I have two on-going claims 220201461979-2 and 220201496352

    €506 (Avg Bid)
    €506 Gns Bud
    14 bud

    Please read and understand the project first, we DO NOT need custom DXF/cad code from scratch there is a full demo project and CadLib library covering 90% + of the work already. Individuals that do not read requirements or reference CadLib will be ignored. Successful candidate will: 1) download / run a working editor application that can read CAD

    €13 / hr (Avg Bid)
    €13 / hr Gns Bud
    9 bud

    I need a software to display Popup on YouTube, Vimeo, DailyMotion or any other embedded video. There will be two types of popups. 1. Click Link 2. Collect Email(via Aweber, MailChimp and GetResponse integration) You can develop this in any language and framework of your choice. I just want this to work smoothly and efficiently. I need this within 3

    €115 (Avg Bid)
    €115 Gns Bud
    4 bud

    I want to build a home automation hub (gateway) based on Espressif ESP32-WROOM-32 chip. I need someone to design a PCB for me which has the following functions: 1) Support Zigbee or Z-Wave (or both if system resources are allowed) 1.1) So the hub can talk to the Zigbee /Z-Wave sensors/device in the house 1.2) For Zigbee, modules based on TI or NXP chips are ok. For Z-Wave, please integrate Silicon...

    €19 / hr (Avg Bid)
    €19 / hr Gns Bud
    29 bud

    Hello. I noticed your profile and would like to offer you my project. I want some software complex. I want this software to be written on Java or Kotlin for mobile and C++ for embedded part. You are invited into the team to be one of developers. We can discuss details over chat.

    €5 / hr (Avg Bid)
    €5 / hr Gns Bud
    3 bud

    I need programmer who can able to do code for wireless home automation project. He/She must know the interface like camera, Ethernet, WiFi,STM32 series and AVR

    €104 (Avg Bid)
    €104 Gns Bud
    29 bud

    ...something for tutoring me) I have a BLE + NFC Project Based on Nordic chip nRF52832 (S132) The IDE is Segger embedded Studio To be precise this is the dev kit I have: [log ind for at se URL] I, myself am a senior software engineer with background in both Android & Embedded software However I need a few tutoring

    €105 (Avg Bid)
    €105 Gns Bud
    5 bud

    I have a BLE + NFC Project Based on Nordic chip nRF52832 (S132) The IDE is Segger embedded Studio To be precise this is the dev kit I have: [log ind for at se URL] I, myself am a senior software engineer with background in both Android & Embedded software However I need a few tutoring sessions from someone

    €208 (Avg Bid)
    €208 Gns Bud
    4 bud
    EMBEDDED SYSTEM Udløbet left

    NEED HELP ON CODING A ARDUINO PROGRAM USING ARDUINO UNO + ESP8266 + KEYPAD

    €58 (Avg Bid)
    €58 Gns Bud
    36 bud
    Embedded Systems Udløbet left

    full project for Industry

    €413 (Avg Bid)
    €413 Gns Bud
    19 bud

    ... preferably in portugal or germany/switzerland, who can take over responsibility for developing some software products on our standardized hardware. This is NOT a onetime project but can be a life job :). Travel to switzerland (paid) will be likely required at the beginning and then maybe on a regular base. If things work out well we search a long term

    €2660 / hr (Avg Bid)
    €2660 / hr Gns Bud
    10 bud

    We are looking for an experienced embedded engineer with experience on working with motors and controllers, COMM and Bluetooth modules, DC/DC Converters and development boards. The project involves controlling inputs into a battery pack (using a BMS) and a motor using a Bluetooth module to manage commands from a phone app.

    €368 (Avg Bid)
    €368 Gns Bud
    23 bud

    I have a BLE + NFC Project Based on Nordic chip nRF52832 (S132) The IDE is Segger embedded Studio To be precise this is the dev kit I have: [log ind for at se URL] I, myself am a senior software engineer with background in both Android & Embedded software However I need a few tutoring sessions from someone

    €121 (Avg Bid)
    €121 Gns Bud
    4 bud

    Hi, Minimum of 3-5 years of experience with this kind of embedded developement experience is needed. 1)Need to build Arduino Bluetooth module,get signals from Android bluetooth,it should never stop in life,at any case if it stops it should restart again. 2)Android mobile should connect to BLUETOOTH and send signals to BLUETOOTH Arduino module,can use

    €26 (Avg Bid)
    €26 Gns Bud
    8 bud

    Hi there, Looking for quick solution on how to parse an email from a user currently logged into wordpress. I am embedding video into a Wordpress page (HTML) using a URL (e.g. [log ind for at se URL]). The video hosting company allows you to pass variables by adding to the end of the URL. For example: "[log ind for at se URL]@[log ind for at se URL]" I need to replace "?wemail...

    €23 (Avg Bid)
    €23 Gns Bud
    19 bud

    Hi, Minimum of 3-5 years of experience with this kind of embedded developement experience is needed. 1)Need to build Arduino Bluetooth module,get signals from Android bluetooth,it should never stop in life,at any case if it stops it should restart again. 2)Android mobile should connect to BLUETOOTH and send signals to BLUETOOTH Arduino module,can use

    €31 (Avg Bid)
    €31 Gns Bud
    17 bud

    Need develop embedded system to control solenoid valve, proximity sensor, accelerometer using LabVIEW arduino interface.

    €154 (Avg Bid)
    €154 Gns Bud
    25 bud

    This is a social marketing project. We need someone with huge activity on electronic groups in facebook, twitter, reddit. its an SEO project.

    €130 (Avg Bid)
    €130 Gns Bud
    9 bud

    ...=721 This device has a built in barcode scanner and HF/RFID reader/writer. We need the application to scan a barcode label and take that decoded data and write it to an embedded HF tag using the writer portion of the scanner. That is the simple version - we may expand the scope as the customer uses it in the field. Ideally if you had a way to do

    €178 (Avg Bid)
    €178 Gns Bud
    2 bud

    We are looking for a on-going part-time hourly C programmer to maintain and enhance our product. The unit is an industrial embedded integration unit based on Arduino multi processors, industrial sensors, graphic display. The person must be proficient in C programming, understand industrial data collection and communication schemes. Strong understanding

    €51 / hr (Avg Bid)
    €51 / hr Gns Bud
    41 bud

    We are looking for a on-going part-time hourly C programmer to maintain and enhance our product. The unit is an industrial embedded integration unit based on Arduino multi processors, industrial sensors, graphic display. The person must be proficient in C programming, understand industrial data collection and communication schemes. Strong understanding

    €47 / hr (Avg Bid)
    €47 / hr Gns Bud
    23 bud

    hi, I m doing microcontrollers based pixel (full color or rgb ) led controllers for matrix pattern preparations. I m using manual graphs for preparing matrix designs. so I m in need of software , in which I need to define row and columns initially, then I need to draw matrix patterns using 7 colors as color picker and drawing it and has to do right or left or up or down shifts the data created in ...

    €241 (Avg Bid)
    €241 Gns Bud
    2 bud

    We are going to develop an application, with embedded firmware and Rasberry Pi3, with Linux UI.

    €1014 (Avg Bid)
    €1014 Gns Bud
    32 bud

    MOD Devices sells audio processors based on embedded Linux running in an ARM system-on-module. We are migrating platforms, from the Allwinner A20 SOM to a Freescale MX8. The job consists on the porting from the sunxi-linux 3.4 to the Mainline LTS kernel. The system is based on Buildroot. The configuration of the kernel includes applying the RT-patch

    €4682 (Avg Bid)
    €4682 Gns Bud
    5 bud

    Need a hardwa...platforms. Must have experience with H.264 video streaming, WiFi, Bluetooth, PZT Pelco protocol, GPIO, PWM servo control, gimbal servo control and remote software control. Project needs completed quickly. Rock64 Board [log ind for at se URL] Raspberry Pi 3 [log ind for at se URL]

    €14 / hr (Avg Bid)
    €14 / hr Gns Bud
    13 bud

    I have a project in c# that when I run as debug with the compiler the software work fine. But if I compile the project and copy the EXE to other folder it not work even if I copy the exe with the dlls. The problem is about sqlite and [log ind for at se URL] because this dll is embedded as a resource. the project have others dlls embedded as a resource

    €27 (Avg Bid)
    €27 Gns Bud
    20 bud
    embedded system Udløbet left

    an Embedded system project Given . I want it coded in C++ . for managing a given organization

    €987 (Avg Bid)
    €987 Gns Bud
    32 bud

    Develop a compiler to translate trained Keras models to embedded c/c++

    €2089 (Avg Bid)
    €2089 Gns Bud
    14 bud

    I have an application that controls the brightness of a screen directly by writing to "/sys/devices/platform/imx28-fb/pwm-backlight.0/backlight/pwm-backlight.0/brightness". Since writing the application, the screen has been replaced and the kernel upgraded, so the new path does not match the path used by the application. The application cannot be updated, so i need a dummy device driver...

    €139 (Avg Bid)
    €139 Gns Bud
    13 bud

    Need to develop a hardware and software solution to capture 3D image for purpose of measurements and rendition

    €2729 (Avg Bid)
    €2729 Gns Bud
    9 bud

    ...booking website. Currently we use a third party system which works great but unfortunately, they cannot accommodate our needs anymore. See below for the requirements for this project. Must have: 1. Shopping Cart where customers can add multiple services and pay at the end (same order). 2. Each service category must have their own booking slots separate

    €1621 (Avg Bid)
    €1621 Gns Bud
    61 bud

    I am working on a nRF52 project where MPU-9250 is connected with i2c interface and (ssd1331) display will be connected via spi. Project Details Initial Setup: Once the device is connected, mobile will pass struct data to do initial set up. This data will be: • Name of device: 15 Chars long • Unique ID: A uuid • Current Time Device Name and

    €601 (Avg Bid)
    €601 Gns Bud
    23 bud

    This the project needs to be composed on latest release for IAR SystemsEmbedded Workbench (download is with KIT from Texas Instruments). The MSP430F2013 CPU has 16-bit RISC architecture that is highly transparent to my application. Result: C code written for MSP430F2013 Target Board from Texas Instruments (part number MSP-eZ430D), detachable part

    €26 - €220
    Fremhævet Forseglet NDA
    €26 - €220
    12 bud

    We need someone for a very small task, to simply tell us what code to remove from our shopify theme of a mail chimp pop-up that was embedded and how to implement a wise pops one that has already been designed.

    €13 / hr (Avg Bid)
    €13 / hr Gns Bud
    19 bud

    I am an electrical engineer that has designed a flow sensor 0 to .5 LPM. It uses a PIC24F16KL402., a ATBTLC BLE module, and has two 256K EEPROMs. Tiny board, (1 inch x 1.5 inch) uses a 13 pin pogo probe interface. It has a micro B USB. It has a non-linear flow sensor as well as a 128 x 32 graphics screen. I have gone to the extent of my abilities programming this, (actually, I am using a Arduin...

    €31 / hr (Avg Bid)
    €31 / hr Gns Bud
    17 bud