Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    53 ds1307 jobs fundet, i prisklassen EUR
    atsamc20 + ds1307 Udløbet left

    reading and writing of ds1307 by i2c, sercom 2, pa08 - pa09, show data read by usart pa00 - pa01 sercom0 in atmel studio with asf4

    €22 (Avg Bid)
    €22 Gns Bud
    2 bud

    ...degree servo at a specified time using a RTC emulator, and stopping the servo function after 15 seconds. RTC - Emulator Link: [log ind for at se URL] Method 2 Also provide code and guidance utilizing an DS3231 RTC chip to do the same function but with an actual RTC chip instead of an emulator

    €29 (Avg Bid)
    €29 Gns Bud
    8 bud

    ...to call on the display only who is present in the room. I also want the time, date, temperature, and humidity to appear in the Led matrix, using the dht11 sensor and the RTC Ds1307 while there is no call. Also I want to be stored in a micro SD module the time that the person entered and when the person left. Another thing I need to do is to warn through

    €151 (Avg Bid)
    €151 Gns Bud
    8 bud

    logger should save date time and value from analog read on button pressed and when button released. When logger recive command "Read" from serial port it shoud return all data from external eeprom to serial port like this >> dd/mm/yyyy hh:mm start [analog value] << dd/mm/yyyy hh:mm end [analog value] When logger recive command "del" from serial port it ...

    €32 (Avg Bid)
    €32 Gns Bud
    4 bud

    ...temperatura. O código arduino ja desenvolvi, mas precisa depurar. Preciso de um LCD Nextion de 2,4 "que possa entrar com seguintes dados: _ acerto de data e horário, uso rtc DS1307 - intervalo entre coleta de dados ( 15 s, 30 s, 1 min, 5min, 10 min, , etc) - alerta de temperatura máxima e mínima - modelo de termopar( K_J_X..etc) - e também m...

    €133 (Avg Bid)
    €133 Gns Bud
    8 bud
    school alarm system Udløbet left

    need code for following project: Hii all of You, 1.I am developing School alarm system: push buttons for up/cursor/select,increment,save,save and exit 16x2 LCD DS1307 RTC Arduino NANO [log ind for at se URL] alarm system [log ind for at se URL] date and time default [log ind for at se URL] press select button ,menu is loading prints for 3 seconds [log ind for at se URL] select ...

    €76 (Avg Bid)
    €76 Gns Bud
    14 bud

    ...control the opening or closing of two irrigation valves automatically which is the bases for my project. For now, there are 2 sensors namely the DHT22, soil moister sensor & a DS1307 (Real-time clock circuit ) to provide real-time and date, therefore there are 3 outputs to control the automation of solenoid valves (24Vdc-Normally closed) to supply water

    €18 (Avg Bid)
    €18 Gns Bud
    8 bud

    we want interface DS1307 with STM8S003f3

    €43 (Avg Bid)
    €43 Gns Bud
    4 bud

    I have a fluorescent display model 03601-14-020/S which I want to connect it to an Arduino Uno and using a RTC module ( [log ind for at se URL] ), I need to display on the screen the time and date. The format have to be like this (HH:MM:SS Day/Motnh/Year) I also need to dim

    €167 (Avg Bid)
    €167 Gns Bud
    15 bud

    ...required. 3. Measure 6 temperatures using i2c pin - DS18B210 is used as sensor (2 pins), and one or two humidity by DHT 11 sensor. 3. RTC chip with backup to be used. DS1307 would be better. Time settable /readable through UART command. 4. Read 4 input pins. 6 inputs desirable. 4. Perform decisions/calculations (setting ios, logging, displaying

    €1185 (Avg Bid)
    €1185 Gns Bud
    24 bud

    Hardware: 1. Arduino Uno 2. SPI MicroSD card adapter v.0.9 3. Adafruit PN532 NFC/RFID Controller Shield for Arduino 4. Real Time Clock Module (DS1307) V1.1 5.16x2 lcd How it will work? 1. Lecturer setup all student name and ID in csv file as attachment 2. Lecturer save csv file into microSD and slot into microSD card adapter. 3. Csv file

    €492 (Avg Bid)
    €492 Gns Bud
    2 bud

    I want to get Parse the gps data(GPGGA) for time and set my rtc(DS1307) using interrupt service routine. data is coming on uart pin RC7 (26 pin of PIC18f4620 on microcontroller).

    €258 (Avg Bid)
    €258 Gns Bud
    11 bud

    Este vorba de un soft pentru un microcontroller pic sau atmel pentru un ceas (ds1307),termometru umidometru (dht22) plus posibilitatea derularii a 10 texte la date prestabilite pe un display alfanumeric vfd 20 digiti si 14 segmente cu drivere max6921.

    €2175 (Avg Bid)
    €2175 Gns Bud
    1 bud
    Scrie un software Udløbet left

    Este vorba de un soft pentru un microcontroller pic sau atmel pentru un ceas (ds1307),termometru umidometru (dht22) plus posibilitatea derularii a 10 texte la date prestabilite pe un display alfanumeric vfd 20 digiti si 14 segmente cu drivere max6921.

    €16 / hr (Avg Bid)
    €16 / hr Gns Bud
    1 bud

    I'm looking for someone how can program a Arduino sketch. Components: - Arduino Uno - 20x4 LCD HD44780 Display - Sparkfun Thermal Printer - Button/Wire... - RTC DS1307? Function: The machine has one button. If the button is pushed and kept that way, on the display starts a Tetris animation. Just a animation, not a real game! It should be a never ending

    €145 (Avg Bid)
    €145 Gns Bud
    22 bud

    Need an experienced embedded programmer to write the source code for a PIC16F877A based relay timer control circuit. Interfaces: 7 wire 4x3 keypad JHD162A LCD display DS1307 RTC, interfaced using I2C. Deliverables: 1. Source code, 2. Complied hex file 3. Circuit schematic coressponding source code.

    €29 (Avg Bid)
    €29 Gns Bud
    19 bud

    real time digital clock is a very accurate digital clock made by using 8051 microcontroller and ds1307 real time clock chip. ds1307 chip run the time accurately by using 32.768 KHz Crystal oscillator. 8051 microcontroller sends the command to ds1307 to configure and read the time date day and year. real time clock is very easy to made and components

    €150 (Avg Bid)
    €150 Gns Bud
    1 bud

    ...components in it and fits the dimension we provide. We are based in coimbatore. Break out modules: 1 Arduino Uno 1 RFID Reader module 1 Sim 900 GSM Module 1 Audio Shield 1 DS1307 Timer module These are all the modules we need to integrate. Single Module Integration Design - Cost as mentioned here PCB for the circuit with the components - Cost

    €125 (Avg Bid)
    €125 Gns Bud
    8 bud

    ...components in it and fits the dimension we provide. We are based in coimbatore. Break out modules: 1 Arduino Uno 1 RFID Reader module 1 Sim 900 GSM Module 1 Audio Shield 1 DS1307 Timer module These are all the modules we need to integrate. Single Module Integration Design - Cost as mentioned here PCB for the circuit with the components - Cost

    €120 (Avg Bid)
    €120 Gns Bud
    15 bud

    Need an experienced embedded programmer to write the source code for a PIC16F877A based relay timer control circuit. Interfaces: 7 wire 4x3 keypad JHD162A LCD display DS1307 RTC, interfaced using I2C. Deliverables: 1. Source code, 2. Complied hex file 3. Circuit schematic coressponding source code.

    €91 (Avg Bid)
    €91 Gns Bud
    22 bud

    I currently have an Arduino Mega setup as a clock that has two alarms and plays an MP3 file for each alarm. I need code written for ...disable each alarm (e.g., set each alarm to be either on or off) 5) shut off the alarm when it triggers The current hardware includes: 1) Arduino Mego 2) MP3 shield 3) DS1307 real time clock 4) 16x2 LCD display

    €4 / hr (Avg Bid)
    €4 / hr Gns Bud
    15 bud

    ...use the I2C protocol. The board must have; 16 digital inputs and 16 digital outputs - perhaps using 2x MCP23017 chips a real time clock with battery - perhaps using the DS1307 chip of the 16 digital outputs, 12 of these should control surface mount LEDs - the remaining 4 should control relays - like the omron G5LA-1 the relay common and output

    €259 (Avg Bid)
    €259 Gns Bud
    18 bud

    I currently have an Arduino Mega setup as a clock that has two alarms and plays an MP3 file for each alarm. I need code written for a d...and disable each alarm (e.g., set each alarm to be either on or off) 5) shut off the alarm when it triggers The current hardware includes: 1) Arduino Mego 2) MP3 shield 3) DS1307 real time clock 4) 16x2 LCD display

    €5 / hr (Avg Bid)
    €5 / hr Gns Bud
    9 bud

    I currently have an Arduino Mega setup as a clock that has two alarms and plays an MP3 file for each alarm. I need code written for a d...and disable each alarm (e.g., set each alarm to be either on or off) 5) shut off the alarm when it triggers The current hardware includes: 1) Arduino Mego 2) MP3 shield 3) DS1307 real time clock 4) 16x2 LCD display

    €3 / hr (Avg Bid)
    €3 / hr Gns Bud
    1 bud

    ...parts i have, and planning to put to work: - Arduino mega 2560 - Compatible Ethernet shield - 4 channel relay module - DHT22 and DHT11 sensors (humidity and temperature) - DS1307 Real Time Clock Module - BH1750FVI (I2C light intensity module) - Soil moisture sensor (made from galvanized nails/wires) - 1602 LCD display - Breadboard - Jumper wires

    €33 (Avg Bid)
    €33 Gns Bud
    5 bud
    Smart Wristband. Udløbet left

    ...next components: BLE 4.0 cc251 15mmx18mm 0.5 inch oled 15mmx10mm A button like the image Bluetooth port to charge the internal battery Battery 200-250mah Pic16f616 Ds1307 RTC I have all the schematics and the code, i just need you produce the PCBA, assembly all the components, and the most importat is that you produce also the wristband on

    €270 (Avg Bid)
    €270 Gns Bud
    4 bud
    Smart Wristband Udløbet left

    ...next components: BLE 4.0 cc251 15mmx18mm 0.5 inch oled 15mmx10mm A button like the image Bluetooth port to charge the internal battery Battery 200-250mah Pic16f616 Ds1307 RTC I have all the schematics and the code, i just need you produce the PCBA, assembly all the components, and the most importat is that you produce also the wristband on

    €26 - €220
    €26 - €220
    0 bud

    ...PN532 NFC/RFID Controller Shield for Arduino + Extras ([log ind for at se URL]) 4. Real Time Clock Module (DS1307) V1.1 ([log ind for at se URL]) How it will work? 1. Lecturer setup all student name in csv file

    €326 (Avg Bid)
    €326 Gns Bud
    8 bud

    hi its to interface the RTC DS1307 with the said controller . bid to have more details, need to be XC16 compiler compatible and to be done by [log ind for at se URL] simple project so maximum budget is 90USD

    €76 (Avg Bid)
    €76 Gns Bud
    3 bud

    I currently have an Arduino Mega setup as a clock that has two alarms and plays an MP3 file for each alarm. I need code written for ...disable each alarm (e.g., set each alarm to be either on or off) 5) shut off the alarm when it triggers The current hardware includes: 1) Arduino Mego 2) MP3 shield 3) DS1307 real time clock 4) 16x2 LCD display

    €26 - €220
    €26 - €220
    0 bud

    I currently have an Arduino Mega setup as a clock that has two alarms and plays an MP3 file for each alarm. I need code written for ...disable each alarm (e.g., set each alarm to be either on or off) 5) shut off the alarm when it triggers The current hardware includes: 1) Arduino Mego 2) MP3 shield 3) DS1307 real time clock 4) 16x2 LCD display

    €186 (Avg Bid)
    €186 Gns Bud
    20 bud

    I need the c-code to interface the PIC24HJ32GP202 with Real Time Clock DS1307 I2C. Must display Hours, Minutes and seconds on a 2x16 LCD. Code must be compatable with the XC16 compiler. Thanks.

    €136 (Avg Bid)
    €136 Gns Bud
    1 bud

    I need the c-code to interface the PIC24HJ32GP202 with Real Time Clock DS1307 I2C. Must display Hours, Minutes and seconds on a 2x16 LCD. Code must be compatable with the XC16 compiler. Thanks.

    €123 (Avg Bid)
    €123 Gns Bud
    7 bud

    ...some other components like: RTC Clock, Optocoupled inputs, etc. Its a small circuit with just few components like relays, buzzer, resistors, capacitors, diodes, oscillators, DS1307, PC817, etc. The whole circuit will be provided to you in a PDF format or some other format. You need to design it in Altium Designer or Eagle using SMD components. As the

    €26 (Avg Bid)
    €26 Gns Bud
    1 bud

    I need the c-code to interface the PIC24HJ32GP202 with Real Time Clock DS1307 I2C. Must display Hours, Minutes and seconds on a 2x16 LCD. Code must be compatable with the XC16 compiler. Thanks.

    €52 (Avg Bid)
    €52 Gns Bud
    11 bud

    ...a different pin header, like the pin 4 with its own VCC and GND. The A0, A1, A2 and A3 will again go out to a 4 pin header, with 4 rows of Vcc and GND. I would like a DS1307 RTC connected to the pins A4, A5 (SCL/SDA). The board will also have LM2596 based power supply. The relays would be the normal 12V sugar cube relays, with 4 relays 10AMPS

    €232 (Avg Bid)
    €232 Gns Bud
    12 bud

    I currently have an Arduino Mega setup as a clock that has two alarms and plays an MP3 file for each alarm. I need code written for ...disable each alarm (e.g., set each alarm to be either on or off) 5) shut off the alarm when it triggers The current hardware includes: 1) Arduino Mego 2) MP3 shield 3) DS1307 real time clock 4) 16x2 LCD display

    €209 (Avg Bid)
    €209 Gns Bud
    17 bud
    DS1307 RTC Controls Udløbet left

    Modify existing DS1307 RTC code to include the ability to program/set or reprogram/reset: 1) the current date and time 2) alarm1 time 3) alarm2 time This programming should be able to be done: 1) with push buttons, and 2) by WiFi (XBee).

    €88 (Avg Bid)
    €88 Gns Bud
    1 bud

    evaluating people as a simple automation code + cabling using: -arduino uno -Module tiny RTC DS1307 I2C -Piezoelectric captor 20x0.33 as sound captor -DTH11 hum/temp captor -Displaytech 64128f -photoresistor -humidity captor application should display time and date and all sensors values and trigger as simple led if any of all presets values

    €79 (Avg Bid)
    €79 Gns Bud
    15 bud

    ...software for it. It's described as below. The PIC micro controller to be used is PIC16F1455 and peripherals required are USART, USB and I2C/SPI interface for interfacing RTC (DS1307) and external EEPROM (24LC32A or similar). A crystal of 32KHz and a battery of 3V will be used. PIC receives data on Rx pin of USART. I need to save the received data (formatted

    €223 (Avg Bid)
    €223 Gns Bud
    12 bud
    solar data logger Udløbet left

    ...software for it. It's described as below. The PIC micro controller to be used is PIC16F1455 and peripherals required are USART, USB and I2C/SPI interface for interfacing RTC (DS1307) and external EEPROM (24LC32A or similar). A crystal of 32KHz and a battery of 3V will be used. PIC receives data on Rx pin of USART. I need to save the received data (formatted

    €40 (Avg Bid)
    €40 Gns Bud
    1 bud

    ...sockets for peripherals these are the periferals atmega328 -pu [log ind for at se URL] [log ind for at se URL] [log ind for at se URL] connected to pin2 [log ind for at se URL]

    €160 (Avg Bid)
    €160 Gns Bud
    14 bud

    ...a different pin header, like the pin 4 with its own VCC and GND. The A0, A1, A2 and A3 will again go out to a 4 pin header, with 4 rows of Vcc and GND. I would like a DS1307 RTC connected to the pins A4, A5 (SCL/SDA). Let me know, if you are interested, lets start will designing the schematics and PCB layout. The board will also have 7805 based

    €119 (Avg Bid)
    €119 Gns Bud
    14 bud

    Board display real timer clock, temp, day, month, year. Board use mcu 89S52, real time ds1307, sensor temp tmp100 and alarm with buzzer. In addition, clock setting real time with sony remote control .

    €220 - €660
    €220 - €660
    0 bud

    ...software for it. It's described as below. The PIC micro controller to be used is PIC16F1455 and peripherals required are USART, USB and I2C/SPI interface for interfacing RTC (DS1307) and external EEPROM (24LC32A or similar). A crystal of 32KHz and a battery of 3V will be used. PIC receives data on Rx pin of USART. I need to save the received data (formatted

    €1003 (Avg Bid)
    €1003 Gns Bud
    34 bud

    ...logged data via XBee. Verbose: We want you to design an arduino mini datalogger "timer" that transmits a data stamp, current time, date using Real Time Clock (e.g. Adafruit DS1307), the total "on" time count and 4 analogue pin values (using arduino mini inputs) to an XBee with data logger "data logger". The total "on" time will be displayed on ...

    €538 (Avg Bid)
    €538 Gns Bud
    7 bud

    I want Real Time Clock to be interfaced with PIC 18F452 Microcontroller. Final deliverable will be a C code. Writing and reading time/date from RTC IC (Preferably DS1307), and displays on LCD. I'd prefer someone who has already work with RTC but it is not necessary. Thanks.

    €27 (Avg Bid)
    €27 Gns Bud
    21 bud

    Hi. I have DS1307 RTC connected with PIC16F777 through bit banging I2C. Don't ask why I'm not using the usual pins! I have the program working, but not good, the numbers running very fast like a stopwatch. No matter which register i will send to the LCD it will act the same. The circuit attached to this post, and my code will be sent through

    €70 (Avg Bid)
    €70 Gns Bud
    11 bud