Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    580 displacement jobs fundet, i prisklassen EUR
    Ansys analysis for my 3d Model 6 dage left
    VERIFICERET

    I have a 3d Model (3d dwg o...export to) that i want you to refine it and make the analysis. I need the upper beam loaded with displacement increasing from ±1mm to ±100mm (cyclic loading) and the bottom beam restrained and i want to see how all the other parts react to this displacement load. You can see the attached picture for more informations.

    €28 (Avg Bid)
    €28 Gns Bud
    21 bud

    ...Body:- Length (mm) Width (mm) Height (mm) Wheelbase (mm) Ground clearance (mm) Kerb weight (kg) Bootspace (litres) No of doors Seating capacity No of seating rows Engine:- Displacement (cc) Max power (bhp) Max power (rpm) Max torque (Nm) Max torque (rpm) Transmission type No of gears Drivetrain Engine type Fuel:- Fuel type Mileage (kmpl) Fuel tank capacity

    €17 (Avg Bid)
    €17 Gns Bud
    26 bud

    ...adjustment is intended to adjust the device in height in relation to the worktop (5). The rough adjustment takes place after loosening the clamp screw (4) by manual axial displacement and subsequent re-clamping. The fine adjustment is made via the Ge-windespindel (3), which by rotation shifts the position part (1) in height according to the previous thread

    €121 (Avg Bid)
    €121 Gns Bud
    36 bud

    ...number of nodes for each element type and compare the results. (2) Use Q4 to do a convergence study on vertical displacement at the point where loads are applied. You can gradually increase the number of elements and see how the displacement results converge. Make a formal report for this project. It should include but not limited to: Part (1) - Contour

    €112 (Avg Bid)
    €112 Gns Bud
    14 bud

    I need to make corrections to a code in Matlab that calculates displacement or drift using T.H.A. method. The code must solve "[M]·ϋ+[C]·u̇+[K]·u=m·a" trough Runge Kutta 4th order method. The model is a 4 floors, 3D frame with 4 columns with shear hinges and 4 undeformable beams per floor (see image below). The results have to be consistent with the

    €501 (Avg Bid)
    NDA
    €501 Gns Bud
    11 bud

    ...come across “/” (slash) in column D (CC) and to write each displacement per line. [i.e. 796/800 796 MONSTER = 796 796 MONSTER 800 796 MONSTER ] • duplicate the line when you come across “/” (slash) both in column D (CC) and in column E (models) by associating per line the first displacement with the first model (and so on and so forth). [i.e. 916/996

    €76 (Avg Bid)
    €76 Gns Bud
    22 bud

    Use ABAQUS to obtain the stress intensity factors for three crack lengths a by different approaches, i.e. displacement and stress extrapolations (plane-strain state is considered). And determine the cycles number of failure Nf of a rectangular sheet with an edge crack.

    €185 (Avg Bid)
    €185 Gns Bud
    15 bud

    We want to model pullout of reinforcement from soil which is in pullout box in ABAQUS 3D explicit. We need to validate wi...need to validate with experimental data from literature where we are not provided complete [log ind for at se URL] different types of strips we need to validate against force vs displacement results. pls let me know ur price for the work

    €110 (Avg Bid)
    €110 Gns Bud
    4 bud
    Image registration Udløbet left

    I am looking to hire an image processing specialist to perform testing of medical image registra...an image processing specialist to perform testing of medical image registration methods using available on SimpleITK open source algorithms. Also perform evaluation (TRE, displacement field analysis) and provide with precise descriptions and conclusions

    €169 (Avg Bid)
    €169 Gns Bud
    10 bud
    Kumo Twist Udløbet left

    ...Indicator for Ichimoku Kinko Hyo I trade Kumo twist (when Senko Span A crosses Senko Span B) Parameters should be: Tenkan-sen: (1-30) Kijun-sen: (1-60) Senko Span B:(1-70) Displacement: True or False if true: (1-36) Kumo Twist Audible Alert: True or False Kumo Twist Email Alert: True or False You can watch my video[log ind for at se URL]

    €146 (Avg Bid)
    €146 Gns Bud
    10 bud

    ... Trace the displacement of this MAC in the area of interest. 3. Identify stop points for this MAC in the area of interest. 4. Record the first moment of MAC in the area of interest. 5. Record the last moment of this MAC in the area of interest. 6. Be able to follow hundreds of thousands of simultaneous events. 7. Design the displacement as an animation

    €220 (Avg Bid)
    €220 Gns Bud
    1 bud

    ...to compare results). All used methods must be clearly described + some nice plots that show diferences between different optimizers, interpolators etc. + some analysis of displacement field and obviously evaluation of the results - TRE or whatever other method that you find more suitable. It generally could be similar to this thesis: https://aaltodoc

    €88 (Avg Bid)
    €88 Gns Bud
    1 bud

    ...interest 2. Trace the displacement of this MAC in the area of interest 3. Identify stop points for this MAC in the area of interest 4. Record the first moment of MAC in the area of interest 5. Record the last moment of this MAC in the area of interest 6. Be able to follow hundreds of thousands of simultaneous events 7. Design the displacement as an animation

    €2385 (Avg Bid)
    €2385 Gns Bud
    11 bud

    Create a tutorial on how to use blender to create a bass relief from a 3D model using displacement maps. It doesn't need to be done this way but the results need to be similar to this. I will want a five-minute demo narrated in English before project is awarded. [log ind for at se URL]

    €164 (Avg Bid)
    €164 Gns Bud
    7 bud

    Create a tutorial on how to use blender to create a bass relief from a 3D [log ind for at se URL] displacement maps. it doesn't need to be done this way but the results need to be similar to this [log ind for at se URL] Here is one way of doing it. 1) Add a camera facing the model(s). 2) If there

    €295 (Avg Bid)
    €295 Gns Bud
    2 bud

    ... Trace the displacement of this MAC in the area of interest. 3. Identify stop points for this MAC in the area of interest. 4. Record the first moment of MAC in the area of interest. 5. Record the last moment of this MAC in the area of interest. 6. Be able to follow hundreds of thousands of simultaneous events. 7. Design the displacement as an animation

    €18 / hr (Avg Bid)
    €18 / hr Gns Bud
    5 bud

    This program s...image for fingerprint recognition' and select one fingerprint. Then the system need to match the input fingerprint with the one in database. If it presence, it will show the displacement distance between that two fingerprints. I want it to be done in a day. Or if you have done this project before, I want to buy it as it is. Thank you

    €334 (Avg Bid)
    €334 Gns Bud
    6 bud

    ...simple hair as a subtool, something that can take you 1 or 2 minutes, just for demonstrative purposes 4. Generate the displacement map using the Multi Map Exporter 5. Back in C4D, create an Octane material where you can set the displacement map previously created 6. Simple render using Octane, something no more than 600 samples, just for demonstrative purposes

    €18 / hr (Avg Bid)
    €18 / hr Gns Bud
    4 bud

    Development in PhoneGap We have a delivery control application we need to improve to make it work offline and also improve the issue of displacement control (GPS) such as speed control and other improvements We need the following points: 1) Make the application work offline 2) Improve GPS shift control (speed, vehicle position with better accuracy)

    €659 (Avg Bid)
    €659 Gns Bud
    3 bud

    We are seeking a 3d artist to create a Black and white displacement map for a special material of a project. Please find attachement for details. The required displacement dimension: 6m x 2.4m.

    €98 (Avg Bid)
    €98 Gns Bud
    10 bud

    hi .. I need a very short python s...short python script written to extract a single displacment (U2) time history a small Abaqus odb file and write to a text file .. I have attacted the [log ind for at se URL] file .. The displacement is stored as a field output within the node set 'LOADING_NODES' which only has single node . The step is 'execution_step' Thanks

    €96 (Avg Bid)
    €96 Gns Bud
    12 bud

    We are the engineering consulting company looking for FEA specialist for a basic project. It's calculation for reactions, displacement and stresses in frame constructions. All material properties will be specified by chat and emails. Loads and boundary conditions according to pictures. Supplied files will be in Parasolid formats.

    €364 (Avg Bid)
    €364 Gns Bud
    67 bud

    The work I require is on going, I am looking for an artist that can create "Special Event" designs up to 6 print colors approx A3for the Power Boat & Hotrod motor sport events in Australia. Straight and comic designs color separated and emailed to my film outputer here Aust I am a screen printer and Retail Distributor in Carrum Downs Victoria Australia 3200

    €182 (Avg Bid)
    €182 Gns Bud
    20 bud

    ...of some control simulations and some of the references to add in the manuscript. We wish like to add the content of the attached manuscript entitled “Simulation of Live Displacement Estimation for Rough Terrain Mobile Robot: BART LAB Rescue Robot” I will appreciate if you can please make this revision at the earliest. Since this is revision of the

    €7 (Avg Bid)
    €7 Gns Bud
    1 bud
    Project for Ali U. Udløbet left

    plot force-displacement chart according to experimental result. The graph pattern should be the same and 10-20% different data can be accepted.

    €31 (Avg Bid)
    €31 Gns Bud
    1 bud

    ...an amasty extension but this will only work on none dispatched orders. All orders only have one dispatched so the logic could be to look for the first or only existing displacement record based on the order ID in the csv and assign tracking information via the best available Magento function. I would be happy to extend on the amasty extension is possible

    €141 (Avg Bid)
    €141 Gns Bud
    9 bud

    ...an amasty extension but this will only work on none dispatched orders. All orders only have one dispatched so the logic could be to look for the first or only existing displacement record based on the order ID in the csv and assign tracking information via the best available Magento function. I would be happy to extend on the amasty extension is possible

    €245 (Avg Bid)
    €245 Gns Bud
    26 bud

    [log ind for at se URL] of the surface (thin flat box) by a falling spacecraft, using Rayfire, creating a displacement of the ground, dust, smoke and fire using the above listed plug-ins. [log ind for at se URL] of outbreaks of gunshots from the robot and aircraft, explosions in the air and in buildings

    €185 (Avg Bid)
    €185 Gns Bud
    7 bud
    Excel expert Udløbet left

    I have an old excel project that no longer works. It calculates a matrix of numbers. Imagine 2 axis, depth and displacement. For incremental steps increasing depth and displacement a number is generated. That number gets plotted resulting in a color coded map. It is the plotting in the old project that isn't working and needs to be fixed. More detail

    €98 (Avg Bid)
    €98 Gns Bud
    41 bud

    This program s...image for fingerprint recognition' and select one fingerprint. Then the system need to match the input fingerprint with the one in database. If it presence, it will show the displacement distance between that two fingerprints. I want it to be done in a day. Or if you have done this project before, I want to buy it as it is. Thank you

    €105 (Avg Bid)
    €105 Gns Bud
    19 bud

    Design & analyze solar ...complete information for manufacturing, drawing scope not involved - complete analysis report with Factor of safety (at-least 2 or 3), weight optimization, with stress, displacement, other details for strcucture - Design details in ppt or word for manufacturing - includes structure, concrete or base ground information ect....

    €222 (Avg Bid)
    €222 Gns Bud
    28 bud

    I need some help with writing a contract.

    €44 (Avg Bid)
    €44 Gns Bud
    6 bud

    I need some help with writing a contract.

    €75 (Avg Bid)
    €75 Gns Bud
    8 bud

    ...specific one. 4. The ability to give benefits for those who did not allow them their circumstances to finish their education, for any reason (whether it was poorness, displacement, and wars, etc..) we have provided an easy way to them fits their needs. By this, we rise the society by teaching all. 5. The ability to memorize the lecture, and replay

    €166 (Avg Bid)
    €166 Gns Bud
    8 bud

    Currently I am looking for a developer who takes care of a very small Job, that is to write a method that downloads a sinusoidal signal from the picoscope 4824 device...that is to write a method that downloads a sinusoidal signal from the picoscope 4824 device (available sdk) and calculates for each channel an effective value and a phase displacement.

    €177 (Avg Bid)
    €177 Gns Bud
    12 bud

    ... 1299 PANIGALE S 1299 PANIGALE R ] • duplicate the line when you come across “/” (slash) in column D (CC) and to write each displacement per line. [i.e. 796/800 796 MONSTER = 796 796 MONSTER

    €25 (Avg Bid)
    €25 Gns Bud
    6 bud

    Create a shadow displacement map of a fold in a fabric that I can apply flat fabric scans to. The purpose is to make the flat scan more interesting and photo realistic with a fold - please see attahced images ([log ind for at se URL] & [log ind for at se URL]). The deliverable will be photoshop psd file (1080px x 1080px) The winner will be given 4-5 fabric scans to test.

    €18 (Avg Bid)
    €18 Gns Bud
    10 bud

    ...make sure the material are photorealistic (one vray dome for the lighting is enough) - Wireframe screenshot to make sure the modeling is done correctly - Water can used displacement mod map - Keep the scene clean and easy to work with (Name object accordingly, layer...) - no need for accessories (flower, soap) - No need of dinerware - sofa can be another

    €113 (Avg Bid)
    €113 Gns Bud
    19 bud

    ...Separately as JPG Files. We are looking for a Photoshop MASTER who is well experienced in these types of T-Shirt Automatic Mockups, someone who understands the mask layers, displacement techniques to create a real life look for us. Please only bid if you are serious you can get this done. We require you to show us the PSDS working this can be done on teamviewer

    €393 (Avg Bid)
    €393 Gns Bud
    23 bud

    Hello mrs Carol...I have some beams to find displacement..Can you please help me?

    €8 - €8
    €8 - €8
    0 bud

    It is required that you provide a printed report with answers, solutions and plots reques...the description of the assessment problems given below. The report should have “.log” file (containing the ANSYS commands) and a “.db” database file (containing a model, displacement constraints and loads) for each of the problems solved. (4 problems )

    €60 (Avg Bid)
    €60 Gns Bud
    1 bud
    Cam desgin Udløbet left

    ...angles for each segment of the cam. Following information should be included in the project report: 1. Motion Requirement description (problem description) 2. sketches of displacement diagram, velocity, and acceleration together with answers o The number of segments needed o The reasons for the existence of each segment. 3. Detailed calculation of each

    €189 (Avg Bid)
    €189 Gns Bud
    15 bud

    ...The template will be used for mock ups for different graphics that 4. ATTACHED IS A SAMPLE OF A STOCK PHOTO THAT NEEDS TO BE MOCKED UP, CURRENT GRAPHIC REMOVED, LAYERED, DISPLACEMENT MAP, etc. NOT THE FINAL work 5. Take the stock photo and convert it into a template mockup for t-shirt graphics. We pay for each completed mock, but if it is horrible

    €4 / hr (Avg Bid)
    €4 / hr Gns Bud
    11 bud

    ...The template will be used for mock ups for different graphics that 4. ATTACHED IS A SAMPLE OF A STOCK PHOTO THAT NEEDS TO BE MOCKED UP, CURRENT GRAPHIC REMOVED, LAYERED, DISPLACEMENT MAP, etc. NOT THE FINAL work 5. Take the stock photo and convert it into a template mockup for t-shirt graphics. We pay for each completed mock, but if it is horrible

    €3 / hr (Avg Bid)
    €3 / hr Gns Bud
    10 bud

    ...you wasted your time not ours. It normally takes 1 hour to do 4-6 mock-ups. We will be providing the images used for creating mocks up. Job Details: 1. 30 mocks 2. Displacement Map 3. PSD Files 4. T-Shirt Graphic NEEDS to be editable (drag & drop) 4. T-Shirt Color Change NEEDS to be editable (using color swatches, etc.) Please provide examples

    €33 (Avg Bid)
    €33 Gns Bud
    32 bud

    write a code or know the steps to 1. acquire the t...the total mass of parts of surface bodies 2. Export the mass from the solution information worksheet 3. import parameter of rotation from fluent to use as rotational displacement 4. select multiple material assignment options for parts or surface body instead of only selecting a single material

    €70 (Avg Bid)
    €70 Gns Bud
    4 bud

    Hi moshchan, I would like to discuss a project with you. It involves engineering design works for a positive displacement (rotary) pump. I have sketches that need to be transformed into CAD to get them 3d printed. Please let me know if this is something that you have skills to do. The budget will be adjusted accordingly.

    €22 (Avg Bid)
    €22 Gns Bud
    1 bud

    Embedded data acquisition of a vehicle suspension for suspension diagnostic. -Data should storage inside a sd card. -System should provide wi...bluetooth. -When critical values exceeded, bluetooth transfer should inform the user . -minimum sensor hardware should measure the acoustical emissions on the suspension, displacement and 3-D acceleration.

    €195 (Avg Bid)
    €195 Gns Bud
    7 bud

    ...marked in yellow. The fields to be updated for EVERY trim are; model year, price, body type, color code, color name, engine type, No. Of Cylinders, horsepower, torque, displacement, 0-100kmph time, transmission type, drivetrain type, number of gears, fuel type, fuel tank capacity, fuel economy, top speed, length (mm), width (mm), Height (mm), Wheelbase

    €934 (Avg Bid)
    €934 Gns Bud
    109 bud

    ...1500 individual vehicles in this market with over 70 brands. Each model will have to be entered in an excel with all the specifications (engine type, engine size, engine displacement, power, torque, weight, etc). There are over 40 entries for each model....

    €312 (Avg Bid)
    €312 Gns Bud
    53 bud