Design pcb integrated antenna mhz bandJobs

Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    17,299 design pcb integrated antenna mhz band jobs fundet, i prisklassen EUR
    pcb desing Udløbet left

    pcb desinger

    €140 (Avg Bid)
    €140 Gns Bud
    26 bud
    pcb desigg Udløbet left

    timer concept lcd 3 relay 3 buttons rtc 6 adc (op amp circuit)

    €92 (Avg Bid)
    €92 Gns Bud
    19 bud
    Tray_V2_Cover Udløbet left

    PCB cover for Tray V2

    €33 (Avg Bid)
    €33 Gns Bud
    1 bud
    PCB Designer 6 dage left

    ...Similar Inglés Avanzado Experiencia en el desarrollo de símbolos para bibliotecas de tarjetas de circuito impreso (3 o + Años de Experiencia) Conocimiento del proceso de diseño de PCB multicapa de alta velocidad, incluyendo: entrada esquemática, generación de listas de materiales (BOM), simulación de diseño, diseño de placas ...

    €2174 (Avg Bid)
    €2174 Gns Bud
    1 bud

    Design a simple PCB that will solder directly to the pins on a SCR module, in Gerber format. A sketch is attached. Two diodes will come from the bottom on the two sides and the term block from the bottom on the end.

    €109 (Avg Bid)
    €109 Gns Bud
    8 bud
    LED PCB + Thermal simulation 6 dage left
    VERIFICERET

    Need help to draw a very simple MPCB, but first i need to figure out some variants with thermal simulation! contact for more info

    €26 (Avg Bid)
    €26 Gns Bud
    3 bud

    Wir benötigen jemanden, der uns ein NFC-Range-Extender-Board auf Basis einer Open-Source-Layout-Software (z.B. KiCad) erstellt. Ziel ist es, die Sourcen für ein Board zu erhalten, mit dem ein NFC-Tag auf eine entfernten (auf dem Board befindliche) Antenne gelesen werden kann. [log ind for at se URL]

    €333 (Avg Bid)
    €333 Gns Bud
    1 bud

    ...AWARDED TO FREELANCERS THAT HAVE A PUBLIC REPO WITH ACTUALLY CODE FROM PREVIOUS PROJECTS Objective: Creation of a socially integrated, ecommerce website. mirroring this CSS layout [log ind for at se URL] End user Design and designer led consumers, appreciate people that want to know the specifics of the target market but this is not essential

    €934 (Avg Bid)
    €934 Gns Bud
    26 bud

    ...Develop a PCB that will activate a micropump, and also a microvalve using a microcontroller to control the inflate and deflate cycles reading the pressure sensor. The PCB must use rechargeable battery charge controller to avoid battery issues. Microusb port to charge and download user log data (time/hours used or device activity). The PCB design will also

    €603 (Avg Bid)
    €603 Gns Bud
    9 bud

    Create schematics and PCB design around a specific processor. Details to be provided.

    €1011 (Avg Bid)
    €1011 Gns Bud
    15 bud

    Need someone to design, layout pcb, circuit design and create schematics for an IOT project. Must be familiar with BGA (ball grid array)

    €417 (Avg Bid)
    €417 Gns Bud
    19 bud

    We are a music band from Greece. The name is Kartel (Καρτελ in greek) music conspiracy. We use Kartel as the main name and music conspiracy as a subtitle but it's under conversation if we'll use it or not. Our sound is modern rock-metal with symphonic elements and native Greek lyrics with social direction messages. We need a monogram logo and a f...

    €24 (Avg Bid)
    €24 Gns Bud
    61 bud
    PCB design 6 dage left

    I have some two PCB boards that I need to merge. They are both IC chip mostly.

    €17 (Avg Bid)
    €17 Gns Bud
    5 bud

    We'd like a business card designing for our band. It needs to look contemporary and professional. Our website is www.take2bigband.co.uk. The information it needs to have on it is : web : [log ind for at se URL] tel : 07791 501 045 email : enquiries@[log ind for at se URL] It can be 1 or 2 sided and the dimensions of the final delivered artwork

    €57 (Avg Bid)
    Garanteret
    €57
    128 indlæg

    We would like to find a party that is very familiar with KiCad PCB physical layout and component libraries. PART 1 ------------- We have a four (4) of electronic schematic developed in KiCad and want them to be be laid out into a physical prototype PCB for testing. Board 1 - has 95 components (of which 7 are multiple pin devices) and the balance supporting

    €216 (Avg Bid)
    €216 Gns Bud
    19 bud
    Band Logo Needed 5 dage left

    I need a logo designed. Singer/ songwriter with band called GLENCOE looking for a vintage /retro logo design. Needs to be simple and cool.

    €58 (Avg Bid)
    €58 Gns Bud
    89 bud

    I want an FM and AM antenna that is as short as 13 cm in length. and this antenna should be able to fit inside the shark fin above the car. The specs of the antenna are- FM Specs- Frequency range - 87.5 MHz to 118 MHz Impedance - 50 Ohm Gain - > 9db Sensitivity - <-5db --------------------------------

    €1343 (Avg Bid)
    €1343 Gns Bud
    4 bud

    [log ind for at se URL] I want to make something like this I want basically to test this circuit and code and a small pcb design with SMD parts. I prefer with atmega8 or atmega328

    €110 (Avg Bid)
    €110 Gns Bud
    1 bud
    Antenna Project- 2 5 dage left
    VERIFICERET

    Need an expert in antenna using CST software Budget- 35$

    €27 (Avg Bid)
    €27 Gns Bud
    4 bud

    I'm on the look out for some hardware development assistance for a project that one of my customers would like to embark upon. Fundamentally they would like to design a box build solution that concentrates on time lapse photography and the delivery of the images. The project will potentially use either a Beaglebone Black or Raspberry Pie processor

    €1584 (Avg Bid)
    €1584 Gns Bud
    9 bud

    ...system shall report the time of last software restart. WAN backhaul The system shall display all the WAN interfaces on the GATEWAY. Antennas The system shall report the antenna information on the GATEWAY Software version The system shall report the current software running on the GATEWAY. Alarms The system shall reports all the alarms on the GATEWAY

    €135 (Avg Bid)
    €135 Gns Bud
    1 bud

    I want to make something like this [log ind for at se URL] I want basically to test this circuit and code and a small pcb design with SMD parts. I prefer to use atmega 8 or atmega328

    €65 (Avg Bid)
    €65 Gns Bud
    3 bud

    ...system shall report the time of last software restart. WAN backhaul The system shall display all the WAN interfaces on the GATEWAY. Antennas The system shall report the antenna information on the GATEWAY Software version The system shall report the current software running on the GATEWAY. Alarms The system shall reports all the alarms on the GATEWAY

    €31 / hr (Avg Bid)
    €31 / hr Gns Bud
    5 bud
    Sd card CID modification 4 dage left
    VERIFICERET

    I am looking for a freelancer to help me with my project. I want to have possibility to change CID from an SD card. The goal of the project is the applicat...project is the application that can change the CID no of a given SD card. It can be a Linux app, windows console app or combination of hardware (build an micro that changes pcb, CID) and software

    €101 (Avg Bid)
    €101 Gns Bud
    6 bud

    ...system shall report the time of last software restart. WAN backhaul The system shall display all the WAN interfaces on the GATEWAY. Antennas The system shall report the antenna information on the GATEWAY Software version The system shall report the current software running on the GATEWAY. Alarms The system shall reports all the alarms on the GATEWAY

    €18 / hr (Avg Bid)
    €18 / hr Gns Bud
    3 bud

    We are looking for someone who is very good with high speed digital layouts. The application is an Ethernet to digital audio motherboard. A daughter card with an Zynq FPGA/processor will install on this motherboard, and the motherboard will install onto a DAC board. There is a development board for this daughter card already. So this motherboard will just be a stripped down version of the developm...

    €1565 (Avg Bid)
    €1565 Gns Bud
    18 bud

    ...system shall report the time of last software restart. WAN backhaul The system shall display all the WAN interfaces on the GATEWAY. Antennas The system shall report the antenna information on the GATEWAY Software version The system shall report the current software running on the GATEWAY. Alarms The system shall reports all the alarms on the GATEWAY

    €9 / hr (Avg Bid)
    €9 / hr Gns Bud
    3 bud

    ...experience. A need has been identified, which we have a concept to address. Design a circuit for a small box to enable a small or medium sized business to quickly self-debug some connection issues. We have a PCB designer & a mechanical engineer, we just need a circuit design & prototype. If you are interested, email a response, and an NDA will be sent

    €1326 (Avg Bid)
    €1326 Gns Bud
    9 bud

    ...system shall report the time of last software restart. WAN backhaul The system shall display all the WAN interfaces on the GATEWAY. Antennas The system shall report the antenna information on the GATEWAY Software version The system shall report the current software running on the GATEWAY. Alarms The system shall reports all the alarms on the GATEWAY

    €413 (Avg Bid)
    €413 Gns Bud
    3 bud
    Design PCB 3 dage left

    Need an ESP12F based PCB design

    €91 (Avg Bid)
    €91 Gns Bud
    1 bud

    ...for a new British rock band that requires a new logo badge to be created digitally for its first EP artwork and website. It's based on a classic round uniform badge and you could potentially paste the image of a similar badge into your software then just change the colours and wording and make a few changes to the animated design. Sketches have been

    €84 (Avg Bid)
    €84 Gns Bud
    20 bud

    first milestone for circuit design, Gerber files, PCB layout, simulator testing and documents. other support. first milestone is part of overall.

    €87 (Avg Bid)
    €87 Gns Bud
    1 bud

    Hi, I want to combine INA3221 + UP9616 + IIC I2C 0.91" 128x32 white OL...with QuickCharge 3.0 full power even if 8 is 100% load also monitor each voltage and amp I know I can use all pcb on ebay to put this together but I want a custom pcb with all component on it (except 12v power supply) I make an image of each pcb component link together Thanks

    €113 (Avg Bid)
    €113 Gns Bud
    4 bud

    Description: - basic processes with PCB (storing process current state, pointer to the current instruction) and calculate I/O yield instructions. - creating new processes per user demand and as many as user requires - implementing one scheduler (but not FCFS) and using it to schedule processes for execution - All these components need to work

    €73 (Avg Bid)
    €73 Gns Bud
    11 bud

    Hi Marek, I am looking for a pic microcontroller with a set of PCB boards. One board should have 5 digital inputs and the other board should have 5 Miniature Relays. Both boards communicate via 2 core cables to a distance of 1000 meters. Operating voltage of the boards to be 12 - 24 volt DC and power source can be arranged on both ends externally,

    €52 (Avg Bid)
    €52 Gns Bud
    1 bud

    Description: - basic processes with PCB (storing process current state, pointer to the current instruction) and calculate I/O yield instructions. - creating new processes per user demand and as many as user requires - implementing one scheduler (but not FCFS) and using it to schedule processes for execution - All these components need to work

    €100 (Avg Bid)
    €100 Gns Bud
    2 bud

    Hi there, i need someone who can code a noise code in matlab and simulate it with CST (for dipole antenna simulation in industrial site) can you do that?

    €52 (Avg Bid)
    €52 Gns Bud
    1 bud
    PCB design 2 dage left

    Need mechanical and PCB design of 7 cardreaders device based on this example ( picture 1 ) connected via USB chip on board. Board should have 1 USB input and one power 5V input which will power all devices. Will be in use with Sim card size connectors so the output layout should be small. Components will be specified later. For any questions please

    €229 (Avg Bid)
    €229 Gns Bud
    39 bud

    ...system shall report the time of last software restart. WAN backhaul The system shall display all the WAN interfaces on the GATEWAY. Antennas The system shall report the antenna information on the GATEWAY Software version The system shall report the current software running on the GATEWAY. Alarms The system shall reports all the alarms on the GATEWAY

    €18 / hr (Avg Bid)
    €18 / hr Gns Bud
    1 bud

    Dear All, I need tutor for POWER ELECTRONICS AND ANALOG INTEGRATED CIRCUITS DESIGN payment hourly basis should be well versed in the specified subjects

    €10 / hr (Avg Bid)
    €10 / hr Gns Bud
    22 bud

    We're looking for an experienced RF circuit designer, one that really knows RF (Radio Frequency) circuits: chips, transistors, tight PCB planes and part placement. Prefer Denver, Colorado area.

    €21 / hr (Avg Bid)
    €21 / hr Gns Bud
    12 bud

    Mobile text to online server integration project. Customers and employees send text messages and get integrated into the online system and archived

    €2449 (Avg Bid)
    €2449 Gns Bud
    46 bud

    ...nas redesxde fibra ótica...um exemplo deste equipamento é a marca fiberhone modelo gpon 5506 ou a vsolution v2801 gpon...eu preciso do projeto da pcb e firmware... também tenho interesse em um projeto de pcb para patchpanel Preciso apenas dos projetos com os gerbers....bom file...o restante do processo eu mesmo faço obrigado...

    €217 (Avg Bid)
    €217 Gns Bud
    2 bud

    Hi hesham0yamani, I noticed your profile and would like to offer you my project. We can discuss any details over chat...hesham0yamani, I noticed your profile and would like to offer you my project. We can discuss any details over [log ind for at se URL] project is designing phase shifter for 5 dipoles array antenna , the design is already done but has some problems

    €60 (Avg Bid)
    €60 Gns Bud
    1 bud

    Hola Emanuel Busco a alguien que me pueda ayudar/orientar con unas PCB que estoy haciendo y a veces tengo algunas dudas sobre componentes electrónicos o recibir recomendaciones sobre Mejoras por ejemplo.

    €7 / hr (Avg Bid)
    €7 / hr Gns Bud
    1 bud

    Me encuentro desarrollando unos PCB para conectar ESP8266/ESP32 para proyectos de mi hogar y necesito orientación/respuestas a algunas preguntas sobre electrónica

    €10 / hr (Avg Bid)
    €10 / hr Gns Bud
    9 bud
    PCB designer 1 dag left

    Need help for design a PCB, my project should be relatively simple just use some basic electronic and should be output on a large PCB

    €264 (Avg Bid)
    €264 Gns Bud
    68 bud

    Design a pcb in which esp8266-12 will be used to control 5 minimilon relays with all required components ..and get it manufacture and delivered to me

    €119 (Avg Bid)
    €119 Gns Bud
    17 bud
    PCB CHECKER 1 dag left
    VERIFICERET

    Need a Professional Report regarding the PCB Layout design. The PCB is in a soft copy layout form. Need to check for the following 1) check for the working of the pcb. 2) is there any noise or disturbances. 3) are the capacitor filters provide sufficient voltage. 4) oscilloscope readings of signals (drops and spikes if any and their corrective measures)

    €31 (Avg Bid)
    €31 Gns Bud
    11 bud

    i need a website for an ISP that sells data packages, web hosting and hardware

    €160 (Avg Bid)
    €160 Gns Bud
    20 bud