Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    4,986 degrees jobs fundet, i prisklassen EUR

    I have been attempting...values for my accelerometer XYZ axis, Euler angles ZYX - these values for both sensors collected at 100ms intervals. Within my sensor glove the devices are orientated at 90 degrees to each other and would related to flexion/extension at the elbow, flexion/extension at wrist, rotation in forearm, abduction/adduction at wrist.

    €132 (Avg Bid)
    €132 Gns Bud
    1 bud

    ...mine to avoid overlap, by lengthening drives/ramps, for instance. When each new updated view of the mine is produced, it will have to be from the same location, with seven degrees of freedom locked: 1) X coordinate of camera 2) Y coordinate of camera 3) Z coordinate of camera 4) Dip 5) Azimuth 6) Rotation 7) Zoom level The locking is required so that

    €431 (Avg Bid)
    NDA
    €431 Gns Bud
    19 bud

    ...rotate first motor only 30 degrees with acceleration (for example. kind of 0->1 -> 2> 3> 4>- ~~~ >100, and it should take 1second reaching from start to the end. and them should rotate back from the end to the start point with deceleration kind of 50 -~~ 4>3>2>1>0 ) secondly i want to rotate another motor only 45 degrees with acceleration (for exa...

    €124 (Avg Bid)
    €124 Gns Bud
    4 bud

    ...seconds long REQUIRED • [4 marks] At least one two-level hierarchical object (e.g. human arm). • [4 marks] At least one texture either procedural or mapped. • [4 marks] 360 degrees camera fly around using lookAt() and setMV(). • [4 marks] Creativity. (Story, colors etc). • [4 marks] Complexity. • [4 marks] Connection to real-time. You should make sure

    €105 (Avg Bid)
    €105 Gns Bud
    1 bud

    ...(instead of flat). We can easily start from a Model we can buy online. It is a very easy job I believe. Then, we would like formats in .gif and .mov of the diaper turning 360 degrees or zooming in on certain parts of the Model. ////// We want this diaper but with an elastic waistband: [log ind for at se URL] ///// With

    €111 (Avg Bid)
    €111 Gns Bud
    5 bud

    ...two or three sub pages as part of Media. The website will need to have a section on main page that allows for visitor to subscribe. The Webpage should be able to play 360 degrees youtube videos. Would like to have modern square box designs. (see following two links as example) [log ind for at se URL] [log ind for at se URL]

    €151 (Avg Bid)
    €151 Gns Bud
    42 bud

    I need you to write some content for a website. I need to het my Statement of Purpose editted as I am applying for MA degrees in different colleges.

    €31 (Avg Bid)
    €31 Gns Bud
    29 bud

    ...extension .dxf is appended Read (xc, yc, W, L, theta) data from an ascii file (xc, yc) are rectangle center in mm (W, L) are width and length in mm theta is CCW rotation in degrees e.g. this draws "S4" in crude rectangle font. -0.187883 0.071279 0.001500 0.010605 45.000000 -0.180383 0.071279 0.010605 0.001500 45.000000 -0.187883 0.093779

    €153 (Avg Bid)
    €153 Gns Bud
    17 bud

    ...stunning colours. Both materials also give the clothes a light, airy and breathable look and feel. In addition, the fabrics are easy care, non-crease and can be washed at 40 degrees, making them ideal for travelling. Andreas Diofebi is a London based company but we manufacture in Brazil, the material and the dye come from Brazil and are cruelty-free,

    €221 - €663
    €221 - €663
    0 bud

    Hello, I'm a former professional football player, corporate executive, Award winning CEO of a STEM based Social Venture, Sax player, 2 masters degrees, Honorary Doctorate, foster child, now world traveler. I have cultivated a concept for a campaign that I believe will empower everyone on the planet to live a more expressive and expansive life. I have

    €7690 (Avg Bid)
    €7690 Gns Bud
    31 bud

    We are Digital Marketing Agency, we work with clients who are looking for 360 degrees online digital solution We are looking for Freelancer who can help us with creatives for our clients. This would be a long-term project as we keep outsourcing creative work. Work would require to create creatives along with adaptation in various sizes for the platform

    €70 (Avg Bid)
    €70 Gns Bud
    14 bud
    Web Scraping on a Large Scale 14 timer left
    VERIFICERET

    I am currently in the process of gauging the feasability and scale of a web scraping project. The gist of this project is to build a database of all degrees offered by all universities in NSW, Australia (collecting key fields such as University, degree name, faculty, skills, related industries, description). This data needs to be scraped from University

    €1414 (Avg Bid)
    €1414 Gns Bud
    59 bud

    Hi Ian. I am currently in the process of gauging the feasability and scale of a web scraping project. The gist of this project is to build a database of all degrees offered by all universities in NSW, Australia (collecting key fields such as University, degree name, faculty, skills, related industries, description). This data needs to be scraped from

    €13 / hr (Avg Bid)
    €13 / hr Gns Bud
    1 bud

    Hello, my Name is Germil and I am the dean of enrollment at SFBC (South Florida Bible College). Our classes are biblically based, and our programs range from AA degrees to Doctorate degrees. We are ranked among the top ten most affordable Bible Colleges in the nation, and we are nationally accredited. I am looking for a company that can help generate

    €884 (Avg Bid)
    €884 Gns Bud
    19 bud

    ...attempt to get short deadline work from when needed. About Us: We have a small team of seo, developers, and graphic designers. We work on a variety of seo jobs with varying degrees of difficulties. We do have small web development contracts and may need help creating content from scratch on occasion, but for the most part it is seo content related work

    €19 / hr (Avg Bid)
    €19 / hr Gns Bud
    15 bud
    Servo Arduino code Udløbet left

    Need help with some Arduino servo code. Instead of buttons moving the servo, one button- one direction. The ot...command to move the servo in one direction and another digitalWrite to move the servo in the other direction. Each digitalWrite command would move the servo up or down by 10 degrees. I've attached a sample code that works with buttons

    €15 (Avg Bid)
    €15 Gns Bud
    3 bud

    ...The STM32F0 will read the IMU data and calculate 3 variables regarding the physical movement of the sensor on a 2d plane in mm and rotation in degrees. The variables are X in mm, Y in mm and Rotation in degrees. When 0x67 is received over the second UART 2, the three navigation variables and the entire contents of the UART 1 circular dma buffer will

    €37 / hr (Avg Bid)
    NDA
    €37 / hr Gns Bud
    28 bud

    ... Below is the information for the caps. LOCAL CAVIAR CO WILD CAUGHT BLACK CAVIAR PADDLEFISH STURGEON FAMILY PRODUCT OF USA KEEP REFRIGERATED BELOW 35.5 degrees Fahrenheit (2 degrees Celsius) 1.646.666.9166 [log ind for at se URL] Image 2 Everything is the same except for type of Caviar. STURGEON HACKLEBACK Elite - the design should match

    €88 (Avg Bid)
    €88
    7 indlæg

    ...Nickel) Below is existing points: HEAVY DUTY: All metal brass construction, ensuring quality and durability CONTEMPORARY: Modern look and easy to install WIDE ANGLE: 220 Degrees crystal clear clarity viewing angle FIT: Fits doors 1-9/16 to 2-3/16 inch thick COVER: Comes with metal cover lid offering extra privacy and security Description: Modern

    €9 (Avg Bid)
    Garanteret
    €9
    6 indlæg
    content writer Udløbet left

    Preparing original content for classes 10th to Master's degrees.

    €233 (Avg Bid)
    €233 Gns Bud
    14 bud

    ...[log ind for at se URL] Required build/project functions and instructions Windows 7/10 user interface The camera is to rotate/scan 180 degrees field view. (180 degrees from Wall mounted position) Object detection software must recognise human walking within camera view. The camera must follow human whilst in view. The camera

    €399 (Avg Bid)
    €399 Gns Bud
    5 bud

    ...The data (.json) contains several parameters (only two of which are wind speed and direction); wind speed is indicated in tenths (e.g. 14.1) and direction is indicated in degrees (magnetic or true makes no difference). A challenge is that I log every second, so over an hour this amounts to 3600 data points; the data needs to be polled each consecutive

    €30 / hr (Avg Bid)
    €30 / hr Gns Bud
    8 bud

    ...models of car available in the mqrket with prices. If a person selects a car the app will take the person to a virtual space where the person can visualise the car in 360 degrees angle. Look inside the car and get the virtual feel of driving the car in a virtual road. The app will have all the sound of the car from starting the engine to running of

    €12430 (Avg Bid)
    €12430 Gns Bud
    18 bud

    ...is interested in taking a percentage of the games revenue on release. I understand if you are skeptical, however, we both are experienced software engineers with bachelors degrees in computer science. We are dedicating our free time to make something fun and exciting. Since we are doing this on the side from our real jobs, we don't require aggressive

    €434 (Avg Bid)
    €434 Gns Bud
    29 bud

    ...application shall then create a virtual trapezoid shape bounded by the 4 points. The screen shall then display the geometry from the origin to each of the 4 points in degrees vertical, degrees horizontal, and distance. This display shall be collapsible so as not to impose too much into the screen when not in use. The user shall be able to then store the

    €256 (Avg Bid)
    €256 Gns Bud
    5 bud

    Looking for a professional logo design for our jewellery s...slogan is Where Everything Shines. I have included a sample picture below of what i want it to look like, the diamonds on the right hand side must be rotated to the right 45 degrees so it looks like the are lying down. Please only apply for this project if you have a good eye for detail.

    €54 (Avg Bid)
    €54 Gns Bud
    49 bud
    2in1charger Udløbet left

    ...the edges. Product logo (Yet to be decided) on one of the sides halfway down. Potentially also have logo on a lid at the top, which will click down and be able to rotate 90 degrees so it's pointing up vertically. Have yet to design the circuitry/batteries/PCB as of yet but am in the process of doing so. [log ind for at se URL]

    €14 / hr (Avg Bid)
    €14 / hr Gns Bud
    8 bud
    build me a website Udløbet left

    ...and (potentially) sell our general performances and educational videos/content through. We are also experimenting with shooting shows in theatres with a 4k camera in 360 degrees. So people can watch a “live” show with a V.R headset from home anytime. (But we stil have a few years for that) For now- I need someone to make me a "mini netflix" -"Fools

    €14401 (Avg Bid)
    €14401 Gns Bud
    81 bud

    i will need a simple animation with a camera round the case while its opening. Camera should point to the case from the up to 45 degrees to the case and the case should open. I will provide brush object of the case

    €32 (Avg Bid)
    €32 Gns Bud
    21 bud

    ...tl/t-CyF6KvmtaD So Do you Know, the fittings are Manufactures fittings which mean the tolerances for which the angle of the pipe can connect to the fittings in within 2.5 degrees +/-. I mention this because I do not see any mention Revit / MEP on your profile so I am just checking you would still be confident to proceed? I have just been informed,

    €32 (Avg Bid)
    €32 Gns Bud
    10 bud

    ...[log ind for at se URL] . The things that this bodybuilder was famous for are: 1) his eyeglasses; and 2) he was nicknamed “The Professor” because he had multiple academic degrees. . SUMMARY: . We will be favoring anyone who demonstrates skill with drawing the bodies, faces, and aspects that make each bodybuilder famous. . If you would like to

    €100 (Avg Bid)
    Garanteret
    €100
    40 indlæg
    Python 3 PDF Parser Udløbet left

    ...sheet of paper (portrait). If any of the documents being printed onto the 1x2, 2x2, or 3x3 documents are in a portrait position (taller than wide), they need to be rotated 90 degrees counter clockwise so they stack neatly. The script must generate as many pages necessary to handle the documents in the directory (so, for example, in the case of a 3x3 print

    €135 (Avg Bid)
    €135 Gns Bud
    13 bud

    ...MODERN/CONTEMPORARY/MINIMALIST/BOXY/SEMI-INDUSTRIAL This project is to be built in a tropical climate and is intended to be fully air conditioned (outside temperature 25-35 degrees Celsius year round) II. MINOR alterations/"tweaks" to the current layout are acceptable (including extensions of the upper floor beyond the lower floor) but must respect

    €221 (Avg Bid)
    Garanteret Forseglet Topkonkurrence
    €221
    17 indlæg

    You need to create a 3D model of nail clippers and animate it (180 degrees rotation).

    €143 (Avg Bid)
    €143 Gns Bud
    65 bud
    mobile Flipper app Udløbet left

    1) Need ...developer to create a basic mobile flipper app ... 2) for iPhones / Androids screens / Screen Display ... 2) that can flip any live video orientation on these phones by 180 degrees horizontally or vertically by swiping. Most current apps on App Store only flips video files ... I need simple app to flip the live screen ... Thank you

    €177 (Avg Bid)
    €177 Gns Bud
    24 bud

    ...request will be sent to the backend server. Tab 2: That same json file contains different data. Here we want a switch, few buttons "cool, heat, off" and a sider for temp degrees. An illustrative image will be sent. Tab 3: Create it but leave it empty for now. 2- Second Screen (Cameras Screen): the SDK for the cameras is present with an iOS examples

    €199 (Avg Bid)
    €199 Gns Bud
    19 bud

    ...need you to detect all corners with given image of triangle and diamond. No visual toolbox are allowed. Secondly, I would need to rotate the image of '[log ind for at se URL]' by 30 degrees, without using toolbox functions given in Matlab. The codes need to be manually created, using loop etc. Lastly, you would need to submit a report of details of algorithm (theory/concept)

    €59 (Avg Bid)
    €59 Gns Bud
    3 bud

    ...there, I would like you to detect the corners of a triangle and a diamond found in the attached files. I would also like you to rotate the image of '[log ind for at se URL]' by 30 degrees in MATLAB without using 'imrotate' etc.. You are only allowed to use basic functions such as 'imread', 'imshow', 'imbinarize'. You will need to write M...

    €23 (Avg Bid)
    €23 Gns Bud
    2 bud
    Trophy icon Presentation Folder Design Project Udløbet left

    ...like the raw design files (i.e. InDesign, Illustrator, Photoshop, etc.). If you are also designing onto the pocket, the image for the pocket area only needs to be rotated 180 degrees as this gets folded into the inside and glued. For the proposed graphics for the inside of the folder, the full 9” x 12” Right panel is available for your image. On the Left

    €169 (Avg Bid)
    Garanteret
    €169
    30 indlæg
    Arduino code -- 2 Udløbet left

    ...then lower upon receiving a signal from a sensor or within a certain timeframe if the sensor is not triggered. Device Functionality: The device will raise and lower an arm 90 degrees using a gear attached to a stepper motor. The arm will be raised by pressing a button on an IR remote. Once raised, the arm will remain raised until a sensor attached to the

    €134 (Avg Bid)
    €134 Gns Bud
    22 bud
    SoP Editing Udløbet left

    ...rephrase the whole Sop useful for data science in NYIT In this you need to rephase 1st para in suitable way for data science and also last 2 paras [log ind for at se URL]

    €22 (Avg Bid)
    €22 Gns Bud
    6 bud
    Nest heartbeat app Udløbet left

    I need an...run in a webpage or a crib job on a server that will check the status of a nest thermostat every 15-30 minutes and alert if parameters are met 1) if the temp is under xx degrees where xx is configurable 2) if the nest is unreachable for xx amount of time There is open source code that should help with this at [log ind for at se URL]

    €226 (Avg Bid)
    €226 Gns Bud
    14 bud

    I am developing a Low Voltage three phase sine wave switch mode power supply for home use. I require a sine wave PWM (Currently have an STM32F4 Discove...adjustable, both the carrier (PWM frequency) and the AC frequency (40-60Hz). Each phase needs a complementary sine PWM. The complementary signal needs adjustable dead time (180 degrees out of phase).

    €9 - €27
    €9 - €27
    0 bud

    ...Primary objectives: 1) Passenger capacity of one passenger. 2) Able to carry an external weight of 100 kg (passenger/baggage). 3) The ability to drive on a slope of (45֯) degrees. 4) The ability to withstand jumps and falls of 1m height. 5) The capability of travelling on smooth sand without getting stuck. 6) Strictly for off-road usage without needing

    €300 (Avg Bid)
    €300 Gns Bud
    15 bud

    Hello. For our 5 restaurants we made 360 degree picture sets. And now need to connect them and publish to google maps. It is part of Google Street View functionality where you can navigate further with arrows, but inside. See example here: http://oceallaigh.nl. Inside View section below on a homepage(click on click here). We prefer to hire somebody who has done this before The budget is 50 dolla...

    €49 (Avg Bid)
    €49 Gns Bud
    1 bud

    I have a Christian book that is somewhat written apologetically, defending the name of Jesus. It was writt...book is already on Amazon. "Jesus the Majestic Name" and can be viewed there. I am a pastor and teacher living in New York. I have been trained in theology and religion with degrees. I need to generate sales and possible a website. 516-668-6070

    €130 (Avg Bid)
    €130 Gns Bud
    16 bud

    I have a Christian book that is somewhat written apologetically, defending the name of Jesus. It was writt...book is already on Amazon. "Jesus the Majestic Name" and can be viewed there. I am a pastor and teacher living in New York. I have been trained in theology and religion with degrees. I need to generate sales and possible a website. 516-668-6070

    €110 (Avg Bid)
    €110 Gns Bud
    13 bud

    ...model and supply full engineering drawings for a outdoor BBQ area. the structure needs to be 8m long x 4m wide 2.3m high under eaves, open end's, scissor truss with a 22.5 degrees pitch with a lesser pitch for the underside lining. this will be a free standing structure, the construction needs to be bolt together design, UC (I-beam) column's & beams

    €283 (Avg Bid)
    €283 Gns Bud
    42 bud

    Top degrees Community-artikler