Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    2,498 cetk keypad gtk jobs fundet, i prisklassen EUR

    Summary: Off the shelf micro based control unit using Arduino, etc. Unit takes 2 pulse inputs and interprets to speed, these are 5 volt PNP inputs. Unit has multiple relay outputs for alarms, 4-20 ma analog output, serial output (fixed length ASCII), Ethernet Modbus and Profibus interfaces (slave). The unit has no keypad nor display, programming wil be via bluetooth running an app on IPhone and Android devices. App writing is required. Unit has 2 modes of operation. Stand alone single pulse processing and differential detecting from 2 pulse inputs. Thru Hole and SMT, coding, testing and all drawings and source code.

    €2843 (Avg Bid)
    Fremhævet
    €2843 Gns Bud
    37 bud
    Trophy icon design a keypad 27 dage left

    Please see attached file GMM-1 , you have to design a keypad with 4 keys (on/off, up, down, enter ) . Title of the keypad is GRAIN MOISTURE METER For dimensions please refer GMM-2 dimensions file. You have to design a graphic . The attached files are for dimensions , contest is for a graphic design

    €18 (Avg Bid)
    Garanteret
    €18
    17 indlæg

    I need an app that records attendance timings of a child at a childcare centre. I only need front end as backend api are all done . App will have 3 authenticate with a pin (so keypad like screen) . 2. Accept the time to sign the child in and signout. 3. Thank you message. I would prefer it to be done in react native or nativescript as the app runs on a ipad and android.

    €220 (Avg Bid)
    €220 Gns Bud
    77 bud

    I have a very simple program which displays Yes/No dialog, it is based on GTK-2 It is a program with only 78 lines. Source code available here: I need to switch to GTK+3. I need to be able to compile it linked to GTK-3 libraries instead of GTK-2 Your goal is to rewrite the short program so it works with GTK-3. Functionality must be preserved (it displays a dialog box with certain text, and buttons) If you can start right now, and finish today, your bid will be preferred. Please mention this in your bid. Thank you very much

    €25 (Avg Bid)
    €25 Gns Bud
    2 bud

    I have a 10x10 board with the following part: 5 holes for small sensors, 2 USB ports, keypad, small OLED screen, 3 buttons, 8x8x4 battery and 3 small breakout boards (sizes are available). I am looking for someone to design for me their enclosure.

    €27 (Avg Bid)
    €27 Gns Bud
    49 bud

    The face detection system will detect the identification of anyone who comes closer to the camera within a specific distance. The only persons who have the ability to enter are those who match their identification with the database and type in the correct password on the Keypad. The door will be operated by an electric door lock solenoid, a keypad, and Liquid Crystal Display (LCD). The distance between the human and the door is detected using an ultrasonic sensor. When the user comes near the door within a certain distance, face detection will start working. When the face detection systems detect the presence of a stranger who goes closer to the door, a warning notification and picture can be sent to the owner's smartphone through a mobile application telegram, and a buz...

    €84 (Avg Bid)
    Haster
    €84 Gns Bud
    7 bud

    Hi, I am trying to make a chat rooms app in flutterflow and i made most part of the app to work but i cant understand the concepts of database queries...is not allowing me to update two user records in one action. I need your help figuring out this problem. - Implement Push notifications for texts - Fix the listview of the list of the chats (personal and group) - The listview of the text messages are coming from top to bottom, I need it to start from bottom. like any chat should. - Fix the input field in chat, it is currently coming below the keypad - automultiline for textfield. (it currently has a single line and the texts keep moving horizantally) - help me figure out a way for one user to be able to block another user - help me figure out a way to ban user for certain amount...

    €80 (Avg Bid)
    €80 Gns Bud
    8 bud

    This is an alarm with an activation code and with 2 different time settings for de-activate it. But with few considerations. Basic components: - Arduino mini pro - LCD 16*2 - Keypad 0-9, # ,* - Switch (SW) - Led - Buzzer Process starts when switch is turned on. REFERENCE A Led and buzzer beeps twice. // always Led and buzzer works together Write in the LCD 7 asterisks as following: ******* // 2nd row aligned to the right Then the system waits the input code. The code is 7355808 // It writes from right to left After the code, press "*" in the keypad to confirmation and check out if it’s OK If the code is wrong: Print in the LCD “WRONG KEY” for 2 seconds then back to wait the right code again. If the code is right: The main timer starts ...

    €26 (Avg Bid)
    €26 Gns Bud
    22 bud

    I need to change the value of float setpoint in my code with 4x4 keypad then press # and change the value of const float outputspan(speed) with the same method (time is in ms you need to change it to sec) then press # and it will run. My program only takes 3 digits and * deletes numbers. Pretty simple and straight forward It shouldn't take anytime. I will send you the code to work on.

    €21 (Avg Bid)
    €21 Gns Bud
    9 bud

    Hi Ait Oubella M., I need to change the value of float setpoint in my code with 4x4 keypad then press # and change the value of const float outputspan(speed) with the same method (time is in ms you need to change it to sec) then press # and the program will run. My program only takes 3 digits and * deletes numbers. Pretty simple and straight forward due to your expertise I don't think it will take you anytime to do it. I will send you the code to work on.

    €15 (Avg Bid)
    €15 Gns Bud
    1 bud

    I need someone who can program a Nextion NX322...opens page 2 Button 6 opens page 3 Page 2 Displays streaming sensor data provided by arduino And has a home button that returns to page 1 Page 3 Keypad to enter a value then nextion uses that value to divide the sensor data and display the results. The entered value will also be sent to the Arduino. Page 3 has 2 buttons A home button to return to page 1 Button 9 on = 91 sent to arduino via serial Button 9 off = 90 sent to arduino via serial _____________________________________ Arduino sketch Sends simulated sensor data stream to nextion when page 2 is showing on the display. Receive and store value from nextion keypad Receive button text 1-4 and 9 from nextion and make a corresponding digital pin i...

    €65 (Avg Bid)
    €65 Gns Bud
    8 bud

    A custom dialer flutter plugin with kotlin on the native side. Will be able to display: 1: Display IncomingCall, when app is Killed / On 2: Dialer page will have a working Pick Call, Drop Call, Hold Call, Unhold Call, Mute Call, Bluetooth , Speaker, Add Call and Keypad. 3: Display timer while on call.

    €465 (Avg Bid)
    €465 Gns Bud
    27 bud

    I need a flutter plugin with kotlin on the native side, to have the same features like Truecaller? Features: 1: Notice incoming call, when app is killed/On 2: To be able to Pick, Drop, Hold, Unhold call 3: on/Off for Mute, Bluetooth, speaker 4: add call for conference, keypad, 5: display timer.

    €295 (Avg Bid)
    €295 Gns Bud
    1 bud

    I need a flutter plugin with kotlin on the native side, to have the same features like Truecaller? Features: 1: Notice incoming call, when app is killed/On 2: To be able to Pick, Drop, Hold, Unhold call 3: on/Off for Mute, Bluetooth, speaker 4: add call for conference, keypad, 5: display timer.

    €467 (Avg Bid)
    €467 Gns Bud
    9 bud

    This purpose of this project is to extract a page from the POS machine and send it to an online cloud where the information will be stored in JSON format. This device will have a QR code scanner, NFC card reader and also a keypad input, and all these will be used to identify the cloud ID where the information extracted from the POS system would be sent. The firmware has been done (Python Language). I need someone who knows python language to add few features to the firmware and make a PCB design.

    €377 (Avg Bid)
    €377 Gns Bud
    29 bud

    We have a POS in PHP and Jquery. It currently has a functional fixed on-screen keypad, but I need a new keypad as a popup. The POS is completely developed in HTML, PHP and Javascript with Mysql database. An example of POS with this approach is WePOS.

    €34 (Avg Bid)
    €34 Gns Bud
    25 bud

    We need a special custom Keypad app for android and ios. You please have to develop the UI and the app itself. Its okay if it is in flutter / dart. The keyboard should be easy to install for the customer and should have three tabs with different functions. We could use the google standard keayboard for input to have the user select the languages they need. The app should be translated in several languages. Its important that the app is stable. We need one in app purchase.

    €858 (Avg Bid)
    €858 Gns Bud
    88 bud

    Hi. I need a clean, easy number keypad to use for quick logins. I do php projects and use JQuery and AJAX a lot. I just want users to be able to enter 4 digits and it submits the code to my login function...which I can do that last part. So upon entry of the 4th digit it should submit the input. I want something simple with circular buttons like the attached screenshot.

    €30 (Avg Bid)
    €30 Gns Bud
    11 bud

    ...ourselves where we can load the codes directly 4 The video of “BRUCE” is only a demonstration of what I expect the end game to look like after all is done. Not a copy but just a guide of quality. 5 Each game will have 6 simple levels like the game Bruce. 6 Scoring system will be based on time taken to finish each level with penalty for using hints. 7 Each level will have at most two puzzles and keypad to move forward. 8 The robot instead of coming through a door will teleport into the game. 9 I have some graphics but as I said before not polished so it will imput on this. 10 We will start with English language but if cost effective I may need about 7 further languages. The game play or puzzles won’t have to change. Firebase has a back end for this purpose...

    €1626 (Avg Bid)
    €1626 Gns Bud
    40 bud

    I have downloaded the latest ISO fatdog 64 812 but have been having a lot of trouble with Google chrome update showing GTK+3 When I have updated this via Gslapt. The browser is then usable till the point until download is actioned then the Google Chrome browser fully crashes.

    €4 / hr (Avg Bid)
    €4 / hr Gns Bud
    1 bud

    I have downloaded the latest ISO fatdog 64 812 but have been having a lot of trouble with Google chrome update showing GTK+3 When I have updated this via Gslapt. The browser is then usable till the point until download is actioned then the Google Chrome browser fully crashes.

    €4 / hr (Avg Bid)
    €4 / hr Gns Bud
    1 bud

    I regularly use puppy linux and fatdog linux and recently lost my live boot up dvd I use. I have downloaded the latest ISO fatdog 64 812 but have been having a lot of trouble with Google chrome update showing GTK+3 When I have updated this via Gslapt. The browser is then usable till the point until download is actioned then the Google Chrome browser fully crashes. Looking for someone who can solve these issues - Freelancers are welcome

    €6 / hr (Avg Bid)
    €6 / hr Gns Bud
    4 bud

    H...interface On that interface, we have a countdown timer, a play/pause button, some buttons to add/remove time, a place to see what codes players are typing and typed before during the game, and a button to debug/reboot the Arduino. - When the game starts, we click on the Play button, puts 60min and starts the countdown. When players gets to the end of the game, they can input the code on a 4x3 keypad. There are LEDs (a red for wrong code, a green for right code, and 4 yellow to know what input they're typing). There is a speaker. And that's it ! I have all code available to show you, I can give more details if needed in private messages before getting a quote. I almost finished the code and need just a little help for the "webpage on SD card" part and some g...

    €30 - €331
    Haster Forseglet NDA
    €30 - €331
    13 bud

    I want a application to be run in smart phones, which will generate a password from two 4 digit numbers( ex. 1234 & 5678). One of this 4 digit number will be entered by keypad and other 4 digit number(fixed) will be in hard core/application. This application will be of 100 numbers, containing different 4 digit numbers in each. So can we get different password formula/process for each formula of generating password from two numbers will be provided after final agreement.

    €153 (Avg Bid)
    €153 Gns Bud
    10 bud

    I need a PID temperature control for a lab oven ( resistance around clay) where the temperature increase and decrease with time at different speeds (1 to 20 hours ; up to 500 degrees celsius) . I need the ability to have multiple setti...up to 500 degrees celsius) . I need the ability to have multiple settings entered at the beginning run one by one without user interference (speed 30 degrees per hour (0,5 per minute) until hour 5, we reach 150 degrees then 50 degrees per hour until hour 7 , we reach 250 degrees, then stay stable at 250 for 3 hours and so on ( up to 5 settings) . I need arduino code + proteus simulation. I have keypad 4*4, max 6675 + thermocouple type k, display ssd1306 or 2 lcds or any of your prefernce, for other components you have the freedom of choice. Budget i...

    €83 (Avg Bid)
    €83 Gns Bud
    11 bud

    Hello All PLEASE READ CAREFULLY! need Android application which can do the following: 1. send API request to get 4 numbers ( from a server ) 2. the app must dial the first number ( using android phone keypad ) 3. after call connected and x seconds the app must dial the second number ( with DTMF ) 4. after x seconds the app must dial the third number 5. the call must be recorded ( and saved with file trans_no and name of the second number ) 6. after this the app must hang the call up and save the audio file on local MMC, and send it back to sever ( api request ) 7. save log locally on phone MMC 8. restart from first step!

    €303 (Avg Bid)
    €303 Gns Bud
    22 bud

    Hello there, I need a PID temperature regulator that decrease and increase variable temperatures with variable times and degrees settings (exp 0,1 degrees every 1 minute) with various settings at a time without user interference up to 5 settings(exp 0,1 degrees every 1min up to hour 6 then another setting and so on).With ...PID temperature regulator that decrease and increase variable temperatures with variable times and degrees settings (exp 0,1 degrees every 1 minute) with various settings at a time without user interference up to 5 settings(exp 0,1 degrees every 1min up to hour 6 then another setting and so on).With the possibility to change PID variables other than the standard setting. Enter settings with 4*4 keypad, feedback with thermocouple. Will need Arduino code, Proteus s...

    €98 (Avg Bid)
    €98 Gns Bud
    1 bud
    Build me an app Udløbet left

    I own a beauty parlor. I have 20 services as of now. I want to set up a token system using an android tab connected to a printer. I want an app where my parlor's services can be entered with an index number along with their prices. The app should have a keypad for the customers where the customer will come and enter the service number that they want. After entering the input service number, a token should come out of the printer containing the service number along will the token number with the price of the service. For the analytics part, the app should store all the services done datewise. Also, at the end of the day there should be an option to show the total number of individual services done that day along with the total price of the services done that day. It would be be...

    €994 (Avg Bid)
    €994 Gns Bud
    47 bud

    Here is a summary of the job we need a solution for. We have two feeders from Coperion called K-Tron feeders, which are used to feed powder. They are equipped with Control Modules and are currently operated via the local fully functional display and keypad assembly mounted on the control module. We intend to control and program these feeders through a host computer. The machines feed materials into a reactor and during operation, the reactor temperature varies in a range. We need the feeder to respond to these changes and trigger an operation. For example, if the temperature exceeds the operating range, the program should trigger and stop feeding and resume once the system is restored. So, we would like to read the temperatures (using simple thermocouples) and then communicate with ...

    €934 (Avg Bid)
    €934 Gns Bud
    8 bud

    Vær venlig at Tilmelde dig eller Log ind for at se detaljer.

    Fremhævet Haster Forseglet NDA

    It's a device that counts objects that passes by. Pressing the start button on the 4x4 keypad will start the counting of objects. Every time the interrupt is triggered(falling edge), the count should increase by one and should be displayed on a 5 digit seven segment display. There are a few modes that I'll explain on chat, but these are the major tasks. I have the hardware with me, so project will be completed after I get the satisfactory output on hardware. Deliverables will be the MPLAB .X file. I know how to use Arduino IDE for AVRs, so I know that logic isn't that difficult, I only need someone who has experience with PIC to save time setting the register values and stuff. Max I can give you is Rs.5000

    €98 (Avg Bid)
    €98 Gns Bud
    18 bud

    ...too small. Make both of them same font size as the values on the top. The header LANDING CLIMB LIMIT WEIGHT should change for 777 and 787 only to APP or LDG CLIMB LIMIT WEIGHT In tab LCLW change 7 notes. (see Excel) Then also I noted when using a smaller size iPad the text is sometimes not shown in full, i.e. replaced by ... I was unable to make a screenshot of it. It was the case for: - the keypad. please double check MLW, 000, ADJ (AT OFF) Do not make them smaller but only crop the size in case the output is ... Sometimes the problem is in landscape or portrait only. Not always. Also the problem appeared for APPROACH FLAPS 20 and LANDING FLAPS 30 and/or APPROACH FLAPS 20 and LANDING FLAPS 25 or 30 (with exchange symbol). This text was too long (I forgot if it was portrait or...

    €103 (Avg Bid)
    €103 Gns Bud
    1 bud

    The project already runs on an ATmega328PU chip but I am not happy with its operation. I want to switch to ATmega32-16PU MCU to avoid the I/O expander hopping to eliminate some strange malfunctions. I would like a new SW to run on the ATmega32 or if it is possible modify the existing one. I use Arduino IDE 1.8.19 to Upload the sketch. Programming is done through a 3X4 Keypad. User enters a 4-digit code to gain access to any combination of floors The system controlls 7 relays that can be energised either by entering the user code or by pressing one of the 6 remote switches.

    €14 / hr (Avg Bid)
    €14 / hr Gns Bud
    4 bud
    EK-TM4C123GXL board Udløbet left

    hello Kartik, I have a project for you if you are interested, I am using taxes instrument launchpad kit ( EK-TM4C123GXL) using Energia IDE and the programming language is C I need your help in the following things 1- write me a code which take information from a 3x4 Keypad to turn on/off RGB LEDs built in the board (when press 1 on the keypad turn on the Red LED and press it again turn it off) and etc. teaching me how to read from the data sheet the necessary information. thanks

    €36 - €36
    €36 - €36
    0 bud

    i need to build a Native dialler product that works from my react native CRM app .it should have the following functionality . controls for next call,pause call start and stop auto dialler keypad auto voice recorder transfer call to an agent live whisper barging for VoIP calls mute/speaker/hold/transfer/start recording/stop recording controls /add call/duration/call status/name of the person called/company

    €366 (Avg Bid)
    €366 Gns Bud
    8 bud

    i need to build a Native dialler product that works from my react native CRM app .it should have the following functionality . controls for next call,pause call start and stop auto dialler keypad auto voice recorder transfer call to an agent live whisper barging for VoIP calls mute/speaker/hold/transfer/start recording/stop recording controls /add call/duration/call status/name of the person called/company

    €363 (Avg Bid)
    €363 Gns Bud
    12 bud

    i need to build a Native dialler product that works from my react native CRM app .it should have the following functionality . controls for next call,pause call start and stop auto dialler keypad auto voice recorder transfer call to an agent live whisper barging for VoIP calls mute/speaker/hold/transfer/start recording/stop recording controls /add call/duration/call status/name of the person called/company

    €216 (Avg Bid)
    €216 Gns Bud
    6 bud

    I am looking for a Rasberry Pi expert , who can setup my Rasberry Pi board with GTK+ and PySide2 python packages. It is a short job which needs some expertise.

    €80 (Avg Bid)
    €80 Gns Bud
    7 bud

    english >--------------------------------------------------------------------------------------------------------------- -- SIP client as APP for Nextcloud with JSSIP library. The following functions should be supported: To dial a keypad 0-9 *,# Answer and hang up with DTMF transmission. 1. register extension 2. make call 3. accept call german >--------------------------------------------------------------------------------------------------------------- SIP Client als APP für Nextcloud mit JSSIP library Folgende Funktionen sollen unterstützt werden: Zum Wählen ein Tastenfeld 0-9 *,# Annehmen und Auflegen mit DTMF Übertragung 1. Nebenstelle registrieren 2. Anruf ausführen 3. Anruf annehmen

    €614 (Avg Bid)
    €614 Gns Bud
    7 bud

    Willing to hire Electrical/Electronic Engineer for making Modified Keypad Prototype for our us, Applicant should be well versed with Keypad/Pinpad Circuit Designing etc

    €498 (Avg Bid)
    €498 Gns Bud
    8 bud

    i need to build a Native dialler product that works from my react native CRM app .it should have the following functionality . edit time gap duration between consecutive calls controls for next call,pause call start and stop auto dialler keypad auto voice recorder calls list in CRM with same behavior as leads employee online/oflline/break/inactive for x minutes transfer call to an agent live whisper barging for VoIP calls mute/speaker/hold/transfer/start recording/stop recording controls /add call/duration/call status/name of the person called/company

    €80 (Avg Bid)
    €80 Gns Bud
    3 bud

    The calculator I am hoping to see should be built using Logisim. It should implement multiple different types of logic components, including AND/OR gates, inputs, shift registers, etc. (components learned at a beginner level). The requirements for the calculator are as follows: 1. The calculator should be purely digital 2. It ha...inputs, shift registers, etc. (components learned at a beginner level). The requirements for the calculator are as follows: 1. The calculator should be purely digital 2. It has to do only addition, subtraction, multiplication and division 3. The display should have two rows, one with at least 5 inputs 4. There should be a display for the operation being performed 5. User input should be through a keypad Link to Logisim:

    €80 (Avg Bid)
    €80 Gns Bud
    12 bud

    i need to build a Native dialler product that works from my react native CRM app .it should have the following functionality . edit time gap duration between consecutive calls controls for next call,pause call start and stop auto dialler keypad auto voice recorder calls list in CRM with same behavior as leads employee online/oflline/break/inactive for x minutes transfer call to an agent live whisper barging for VoIP calls mute/speaker/hold/transfer/start recording/stop recording controls /add call/duration/call status/name of the person called/company

    €97 (Avg Bid)
    €97 Gns Bud
    5 bud

    i need to build a Native dialler product that works from my react native CRM app .it should have the following functionality . edit time gap duration between consecutive calls controls for next call,pause call start and stop auto dialler keypad auto voice recorder calls list in CRM with same behavior as leads employee online/oflline/break/inactive for x minutes transfer call to an agent live whisper barging for VoIP calls mute/speaker/hold/transfer/start recording/stop recording controls /add call/duration/call status/name of the person called/company

    €101 (Avg Bid)
    €101 Gns Bud
    5 bud

    i need to build a Native dialler product that works from my react native CRM app .it should have the following functionality . edit time gap duration between consecutive calls controls for next call,pause call start and stop auto dialler keypad auto voice recorder calls list in CRM with same behavior as leads employee online/oflline/break/inactive for x minutes transfer call to an agent live whisper barging for VoIP calls

    €98 (Avg Bid)
    €98 Gns Bud
    1 bud

    i need to build a Native dialler product that works from my react native CRM app .it should have the following functionality . edit time gap duration between consecutive calls controls for next call,pause call start and stop auto dialler keypad auto voice recorder calls list in CRM with same behavior as leads employee online/oflline/break/inactive for x minutes transfer call to an agent live whisper barging for VoIP calls mute/speaker/hold/transfer/start recording/stop recording controls /add call/duration/call status/name of the person called/company

    €198 (Avg Bid)
    €198 Gns Bud
    6 bud

    i need to build a Native dialler product that works from my react native CRM app .it should have the following functionality . edit time gap duration between consecutive calls controls for next call,pause call start and stop auto dialler keypad auto voice recorder calls list in CRM with same behavior as leads employee online/oflline/break/inactive for x minutes transfer call to an agent live whisper barging for VoIP calls mute/speaker/hold/transfer/start recording/stop recording controls /add call/duration/call status/name of the person called/company

    €89 (Avg Bid)
    €89 Gns Bud
    2 bud

    i need to build a Native dialler product that works from my react native CRM app .it should have the following functionality . edit time gap duration between consecutive calls controls for next call,pause call start and stop auto dialler keypad auto voice recorder calls list in CRM with same behavior as leads employee online/oflline/break/inactive for x minutes transfer call to an agent live whisper barging for VoIP calls mute/speaker/hold/transfer/start recording/stop recording controls /add call/duration/call status/name of the person called/company

    €89 (Avg Bid)
    €89 Gns Bud
    4 bud

    I want a person wo can make my calculator application using .net core using API, with HTML and CSS. in this app i want to add three new features like if user press from the button 9 from keyboard it will generate sound like 9 after pressing .and another feature i want to add is setting tag in which 4 theme shown so user can change the calculator theme. next feature is have one button in keypad which convert the normal calculator into scientific calculator. download app option also add. last 10 histories in the calculator should be visible . this project will be done in three part in same solution firstly design and integrated testing on api should be done on 8 april. second and third part will be needed after the week and project should be completed before 18 april. and i have to...

    €132 (Avg Bid)
    €132 Gns Bud
    10 bud