Battery system model simulinkJobs

Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    10,926 battery system model simulink jobs fundet, i prisklassen EUR

    ...intervals (from 5s to 24 hours)? Pressure and conductance sensors have analog 4-20mA outputs. 3G, 4G or LTE cellular network to be used for data transmission. Unit needs to be battery operated and low power usage. Are you able to provide advice on this project based on your experience? Questions: Q1. Is Rasberry Pi the most suitable product? Q2. Can it

    €6 - €19
    €6 - €19
    0 bud

    Key words and skills. ROBOTICS-MATLAB SIMULINK- Multibody SIM MECHANICS-Biped Locomotion. The main goal is to create a simulation of a ‘ROLLO’ robot and perform test which have been mentioned in the document p20. Specific aims are to evaluate the repeatability of the biped robotic motion and the safety during different motions, taking into account that

    €136 (Avg Bid)
    €136 Gns Bud
    1 bud
    PV_system_modeling 6 dage left
    VERIFICERET

    Need SIMULINK modeling so that desired power production using PV modules connected in series and parallel are realized. SIngle module process 260 Watt power at 1000 irradiance. there is temperature variation also, but it remained below 40 deg C, so solar panel performance do not degrade The power requirement will be specified.

    €5 / hr (Avg Bid)
    €5 / hr Gns Bud
    1 bud

    ...(Energy Storage Systems ESS). In the simulation must also be a program that optimizes and organises the distribution of energy and data using model predictive control (MPC). The Simulation must be in MATLAB/Simulink with Simscape. There is no injection of energy from the PVs to the energy network! Only from PVs to the Buildings! PV-Stations 1: 21kWpeak

    €116 (Avg Bid)
    €116 Gns Bud
    19 bud

    ...mpu9250/ICM20689 ) 3) Sound decoder (VLSI vs1053b) 4) Serial (SPI) NAND flash storage (Micron MT29F2G01) 5) Touch input (TI msp430fr I2C) and 6) Vibration (TI drv2605L). 7) Battery gauge (TI bq27441) It would be great to use ARM mbed OS as IDE of the choice for easy access to the hardware components mentioned above. Other suggestions (KEIL, Arduino)

    €1503 - €3007
    Forseglet NDA
    €1503 - €3007
    31 bud

    ...security ID (shown on ESP32 OLED display) Show analytics: Number of switch triggers Average current draw Average voltage draw Amount of time input ON Current Battery Voltage Estimated Life of Battery (subjective) Download of Analytics: Data to be saved in PDF type format Allow document to have limited editing Full wire frames will be provided. More information

    €11 / hr (Avg Bid)
    €11 / hr Gns Bud
    4 bud

    I will Send the Packing and a video to replicate the unpacking. Once I have the drawings of the circuits and battery I will provide it with instructions for each video. $500 for unpacking segment $500 for Battery version $500 for NFC/chip harvesting version $500 (TBA Version) $500 for PNG of all the important stages. I will describe or explain in

    €2190 (Avg Bid)
    €2190 Gns Bud
    1 bud

    ...-PURPOSE OF PERFORMANCE IN THE DEVICE   a). Monitoring the use of the application CPU   b). Monitoring the consumption memory of the application   c). Tracking the drainage battery of the application -FRONT TESTS   1. Try it on Red Real   2. Simulate field scenarios -Deption of applications    a) .Deep directly from your IDE.    -THE PENETRATI...

    €213 (Avg Bid)
    €213 Gns Bud
    12 bud

    ...transfer battery power from one smartphone to another. For example, you are using an Android Phone(Samsung Galaxy S9) and you have 5% battery power left on your phone. On the other hand, your friend is using another Android Smartphone(say OnePlus 6) and he/she has 90% battery left in his/her phone. Then this app will let you transfer battery from one

    €2537 (Avg Bid)
    €2537 Gns Bud
    8 bud

    ...wifi, bluetooth icons. For the home icons we will do Temperature 1 temperature 2 temperature 3 Alarm Settings Door open Light on and off Statistic Printer lock/unlock door battery backup level security camera ( each icon will be configurable and editable, this means that we need to edit parameters on each icon, for example. on the temperature icon

    €438 (Avg Bid)
    Garanteret
    €438
    5 indlæg

    I look like to design a noise gate with key (duckner) portable. - It will work with electrec microphones (2 inputs/ in and key) - It will work with battery (9 vcc max) - It will be analogic or digital with very low delay. - The size will be small as posible.

    €405 (Avg Bid)
    €405 Gns Bud
    9 bud

    ELECTRICAL ENGINEER required to calculate sizing, battery requirements and provide performance graphs for a Brushless EV Motor. We will provide RPM, power requirement and performance times. This could become a huge project as if successful will result in multiple sales of this unit worldwide. NDA will need to be signed. The option of profit share is

    €46 / hr (Avg Bid)
    €46 / hr Gns Bud
    7 bud

    I need a heating element to heat f...closed food-safe plastic or silicone rubber container (20cmx10cmx2cm) powered by a portable induction battery (power bank or similar). I need the full detailed specifications on the materials for all parts, connectivity, materials, heating elements, battery, thermostat and timer. High-level CAD design is available.

    €136 (Avg Bid)
    €136 Gns Bud
    25 bud

    ...electrical engineer who can analyze the circuitry and electrical requirements of a tracking device and integrate a 6600 mA battery into it. I will also need the battery to be able to charge through a port. You will need to find the type of battery that we will use that must be compatible with the existing circuitry and electrical requirements as well as design

    €136 (Avg Bid)
    €136 Gns Bud
    2 bud
    Building a robot with matlab 4 dage left
    VERIFICERET

    Install Matlab with Simulink, Simscape and SimMechanics options (or you can use some other simulation environment with visualization tool). Then form your own robot with its o0 (origin of its coordinate system #0) on the coordinate (0,0,0) in the inertial frame. Simulate a horizontal rectangular welding pattern moving the tip of the robot between points

    €26 (Avg Bid)
    €26 Gns Bud
    7 bud

    ...High excursion woofer Tweeter array Seamless mesh fabric Payment reader: chip and swipe Smart pay Strong microphones Water proof Bump/drop resistance (durable) Strong battery life (at-least 20 hours) No exterior buttons Tracker inside the device (like find my iPhone) WiFi Bluetooth Designed in a way that Incase stolen very hard to get into.

    €2343 (Avg Bid)
    €2343 Gns Bud
    7 bud

    ...satellite) and includes on [p.12] the simulation information with inertia matrix = [.002 .002 .002]kgm2. This paper includes a model for the magnet sensor, magnetometer, which needs to be modeled in the plant of the system. The position estimates of the CubeSat will be provided by a StarTracker. This paper shows how the StarTracker can generate quaternion

    €2094 (Avg Bid)
    €2094 Gns Bud
    15 bud

    The BMS will be used for Lithium battery in size of 5 - 10 kWh (12 or 24 V) and current of max 500 A, i.e. needs external contactors. Previous experience of PCB as BMS design is required. The project starts with requirements of features and the assignment will result in designed PCB ready for testing (we will perform tests). The BMS design should be

    €2197 (Avg Bid)
    €2197 Gns Bud
    10 bud

    ...-small led display showing battery charge -Has to be able to safety supply each fuse with 40 amps of power (probably aim for 45 for safety margin) -Needs to have 1 single power input stud (8mm stud(to be able to attach a ring terminal -All negatives need to be collected to one (8mm stud) to be able to be routed back to the battery in a single cable see

    €138 (Avg Bid)
    €138 Gns Bud
    17 bud

    I want to Create Special PCB Board by Integrate 2 Electronic Module, Module No.1 is a e paper e-ink Display drive...Wifi Board with esp-8266. Final Results in this Project are : -PCB with full documentation and Sample Codes (Merged Display Driver + Wifi Board) -This Board must contain Battery for Power Resource -This Board must Design with Lower Cost

    €194 (Avg Bid)
    €194 Gns Bud
    14 bud

    ...-PURPOSE OF PERFORMANCE IN THE DEVICE   a). Monitoring the use of the application CPU   b). Monitoring the consumption memory of the application   c). Tracking the drainage battery of the application -FRONT TESTS   1. Try it on Red Real   2. Simulate field scenarios -Deption of applications    a) .Deep directly from your IDE.    -THE PENETRATI...

    €344 (Avg Bid)
    €344 Gns Bud
    13 bud

    This project requires complete product design of dual SMPS Charger Units. Complete technical specifications are available and our need is- a complete circuit design and sizing calculations alongwith BOM and drawings for the said product. We will build the prototype at our factory. The Designer should take complete responsibility of his design in terms of workability.

    €1666 (Avg Bid)
    €1666 Gns Bud
    9 bud

    Hello, We are in search of lots of data on battery for certain applications. We will start with electrical bicycles, where I will supply you with a list of brands. I will also send example in excel of data we need. So it could be: Bicycle brand: Centurion Model name: No Pogo E R3500 Battery name: Bosch PowerPack 500Wh Please give us an hourly

    €7 / hr (Avg Bid)
    €7 / hr Gns Bud
    56 bud

    make a command under simulink / matlab to control the system railway power conditioner

    €37 (Avg Bid)
    €37 Gns Bud
    11 bud

    SIMULINK SETUP using Model reference adaptive system for an induction motor speed estimator is needed. -Fractional order PID will be used -Back EMF method will be used -Tuning will be explained -References of the design will be added if requested.(Transfer functions, driver, ...) -Work time is 5 days maximum, for everyday delay, 20% of the payment will

    €152 (Avg Bid)
    €152 Gns Bud
    9 bud

    I require an app to be customized for the use of a wifi endoscope and branded with our company name. It needs to connect to a battery powered wifi unit that has the endoscope attached to it, take still images and video and have it's own image library. The app needs to be able to have more things attached to it as it is developed. link for endoscope

    €145 (Avg Bid)
    €145 Gns Bud
    8 bud

    ...connecting sensors. 4. Inbuilt BLE Antenna and Wifi Antenna (or you can attach some workable modules) 5. Battery powered prototype (any good battery spec within the size limit should be fine) 6. USB port for coding programs and recharging the battery 7. 2-3 sample buttons on the device 8. Test LEDs before each port and buttons 9. Basic firmware and boot-loader

    €435 (Avg Bid)
    €435 Gns Bud
    12 bud
    Andriod App for location tracking 21 timer left
    VERIFICERET

    Create a android app for continuous user location tracking. Our preference is for coding and not f...app for continuous user location tracking. Our preference is for coding and not for app UI.. the main objective is to track user location continuously without draining of battery and without any extra charges to location service provide example google.

    €167 (Avg Bid)
    €167 Gns Bud
    12 bud

    ...to be produced to act as a proof of concept for a larger project. I require the following: - I am looking to create a system whereby small e-ink displays (approx. 10-12 inch) are all connected via mesh network and powered by battery. They are to be able to receive data from a "master terminal" that will be a PC and mains powered and display whatever

    €1262 (Avg Bid)
    €1262 Gns Bud
    13 bud

    Hi, We are looking for someone to develop a simple wireless power supply that is battery operted. We alreday have a prototype and the idea is the improve the quality of what we alreday have and find or create a battery which is smaller and has more power. ( the battery is rechargable)

    €246 (Avg Bid)
    €246 Gns Bud
    18 bud

    ... The there are two main panels that need to be designed: Panel 1: Main Power Panel (MPP) This panel will have the 480VAC power source and will break into a 24VDC battery backup system similar this: [log ind for at se URL] Panel 2: The Main Control Panel (MCP) The main control panel will house the S7-1518

    €11 / hr (Avg Bid)
    €11 / hr Gns Bud
    32 bud

    ...business consists of renting electric scooters through a mobile application. I would need an application with which I could see the gps location of each scooter, see the battery level and charge. The home tab should have the rules of use and the option to register or login, at the time of registration we would have to put a name, ID, e-mail, credit

    €1369 (Avg Bid)
    €1369 Gns Bud
    22 bud

    Need assistance with BLE firmware set up for battery operated sensor. Battery management and experience with TI BLE projects essential.

    €504 (Avg Bid)
    €504 Gns Bud
    16 bud

    ...spi bus and interrupt 1 there is also a 32khz crystal connected. There are a few capacitors as per the data sheets reference designs. The whole thing is powered by a cr123 battery which requires a holder. Required are two pins for the swdio and swclk also two pins for off board power. Which io pins are to be used for the spi bus can be determined by

    €151 (Avg Bid)
    €151 Gns Bud
    36 bud
    PCB Design Udløbet left

    ...developing an autonomous system for operation and maintenance (O & M) of solar PV plants. This system is consists of mechanical and electronics components. Here, in this project of PCB designing, It is including control circuit (Motor drivers, sensors and voltage regulators), Communication circuit (GSM/GPRS) and power circuit (Battery charging and BMS). For

    €215 (Avg Bid)
    €215 Gns Bud
    21 bud
    IoT Dashboard Udløbet left

    We are looking for a custom IoT Dashboard to display information like device temperature, battery level and location to start. Additional data will be added later including local weather. The database to be used is InfluxDB. Data will be imported from The Things Network IoT platform. This will be an ongoing project.

    €15 / hr (Avg Bid)
    €15 / hr Gns Bud
    22 bud

    Hey, I need to write a Research Proposal on Intelligent Hybrid Microgrid with Battery management System. More on chat.

    €29 (Avg Bid)
    €29 Gns Bud
    4 bud

    ...HDD wear in % (8) 9) SSD drive? (yes/no) 10) LAN card MAC address (1a:2b:3c:4d:5e:6f) 11) BIOS version (1.2.34) 12) BATTERY original full charge capacity in mAh (4321) 13) BATTERY current full charge capacity in mAh (1234) 14) BATTERY wear in % (8) Finally, these data should be appended to a "[log ind for at se URL]" file in the root of the USB drive. (If the fil...

    €182 (Avg Bid)
    €182 Gns Bud
    17 bud
    Arduino Coding Udløbet left

    We have a requirement of Arduino Coding for Solar Charge Controller. The hardware is ready and we need to test it with Arduino coding for Solar Panel, Battery and Load(LED) driving. PFA the attached files for Requirements !

    €110 (Avg Bid)
    €110 Gns Bud
    22 bud

    I'm in the process of starting a member's only club and wanted to do an analysis on the competition. Your job is to get as much information, including applications an...difficult to source. Please apply to the following clubs and get current information for the following: Club 33 University Club Bohemian Club California Club Wingtip Club The Battery

    €22 (Avg Bid)
    Garanteret Forseglet
    €22
    2 indlæg
    Make a PCB Udløbet left

    I want to make a PCB design with stm32 sx1276 lis3mdl support by battery

    €86 (Avg Bid)
    €86 Gns Bud
    19 bud

    ...resolve battery usage issue on ailocations app. further info on app at ailocations.com. Looking for IOS developer to do the following: - Fork code for app from github repository and compile and understand app. (access will be given to successful freelancers) - Make app more battery efficient - and ensure any code that is taking more battery than is

    €22 (Avg Bid)
    €22 Gns Bud
    3 bud

    RESPONSE PHOTOVOLTAIC associates the solar radiation and thermocracy NOTE: Use the MATLAB/SIMULINK or other software or language of planning in order to you develop a model F/B of 5 parameters so that you study the response of current of expense I as for the INCIDENT solar radiation, G, and the temperature of panel, T. Execute simulations for G=600…

    €29 (Avg Bid)
    €29 Gns Bud
    10 bud

    Hi, I need two circuit. 1. Boost: 12V to 65V-75V 3000W CV Switching Power Supply 2. Buck:65-75V 3000W CC/CV Switching Power Supply, battery charger The price can be discussed.

    €1173 (Avg Bid)
    €1173 Gns Bud
    22 bud
    PBC Design Udløbet left

    ...to all the interfaces that the device has, list below: • 1x– VGPIO (1.8V) • 1x– BAT_RTC backup battery interface • 1x– 1.8V USIM • 1x– USB FS • 11x – GPIOs • 1x – 8-wire UART • 1x – Active Low POWER ON • 1x – Active Low RESET • 2x – ADC • 2x – System clock out (32.768...

    €193 (Avg Bid)
    €193 Gns Bud
    35 bud

    Prototype 5 PCBs with battery life testing using 4.2v battery. As discussed over email.

    €324 (Avg Bid)
    €324 Gns Bud
    1 bud

    We have 2 projects which are based on Matlab Simulink. The person who are expert in Matlab Simulink design can work with us. We need these projects urgently. We will first priority to Indian person.

    €3 / hr (Avg Bid)
    €3 / hr Gns Bud
    10 bud

    ...to provide advice and support in electric power system transient stability analysis within Matlab/Simulink environment. The power system should contain photovoltaic panels, wind turbines, electric vehicles and energy storage systems, and they need to be modelled and connected to the original power system. I will provide more details to the selected freelancer

    €309 (Avg Bid)
    €309 Gns Bud
    25 bud