Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    3,538 autorun usb jobs fundet, i prisklassen EUR

    I need you to develop some software for me. I would like this software to be developed using C or C++. Use pic18lf45k50 to be a mass storage usb device with ability to write/append to file using SD card

    €39 (Avg Bid)
    €39 Gns Bud
    6 bud

    I need you to develop some software for me. I would like this software to be developed using C or C++. To make a pic18lf45k50 appear as a mass storage device with and sd card using mplabx and xc8. with ability to write/append to a file

    €183 (Avg Bid)
    €183 Gns Bud
    11 bud

    I have my program already now its used usb dongle to control license .And now I would like the license tool able to generate license which able to define number of users , expiredate or unlimited date , and lock my program to use only one computer was defined ( by cpu id )

    €902 (Avg Bid)
    €902 Gns Bud
    8 bud

    I have an USB hard drive which contains an encrypted Linux LUKS partition whose password I have forgotten. However, I have a list of possible passwords as a text file. One password candidate per line. There are about 100 password candidates in this file. I need you to write a script I can run in Linux that will try to open the USB hard drive, which

    €21 (Avg Bid)
    €21 Gns Bud
    1 bud

    ...monitor from from a PC via its USB port. This device will have an I/O port (one for for 8-bit input and one for 8-bit output ). Also, apart from the I/O, I will need a few additional lines to work as CONTROL lines. The interface circuitry could be built using an ARM Cortex micro-controller, or use an available standard USB interface chips. In either case

    €162 (Avg Bid)
    €162 Gns Bud
    32 bud

    Hello, we have designed a new QR code scanner device. For security reasons we couldn't use a normal USB socket so we redesigned it. So to install the software we need a adapter "USB to our specially designed socket". It has to be a design for manufacturing, so we can 3D print it and use it immediately. I'll send you a file after signing an NDA, how

    €1990 (Avg Bid)
    €1990 Gns Bud
    48 bud

    Need single USB 3amp ultra fast smartphone charger design with following technical specifications and features: Technical specifications and features: • output voltage: 3.6V to 12V and the maximum output current: 3A or slightly greater than that like 3.1 or 3.4 amp and this power should be 18W (Not cheaper and conventional design like output 5V/3A

    €1990 (Avg Bid)
    €1990 Gns Bud
    9 bud

    I have a program installed on my desktop and for some reason its not able to detect the usd reader. need someone that can take a look at it remotely

    €57 (Avg Bid)
    €57 Gns Bud
    1 bud

    ...detailed description of circuit operation Specifications: - usb-c in - 3 voltage rails (plus gnd) out: 3.3v, 5v, 12v. - combined rail supply 1.5A+ - SMD parts - <= US$3.50 components at volume of 1,000 pcs - <= 20mm*40mm. - 0.5-1A charging with under/over protection & low voltage cutoff. - When USB-C wall supply is plugged in, operates off wall supply only

    €334 (Avg Bid)
    €334 Gns Bud
    22 bud

    Android App should generate daily schedule of calls according to preset rules and numbers from list , dial and hangup at time. App shoud autorun with previous settings after reboot. App working principle: * - all X and Y values which will be used below set from user interface Main page Choose program: On/Off Mute: On/Off Show today call duration

    €481 (Avg Bid)
    €481 Gns Bud
    25 bud

    Build printed circuit from a blueprint drawing project of the item attached. PCB file requested. Possibile request to build an hardware prototype with USB port (not LPT port like the original): request of MOB Excel file. I already have a PDF file of the original blueprint.

    €171 (Avg Bid)
    €171 Gns Bud
    19 bud

    Want an app that can store fingerprints of multiple people. Fingerprints to be authenticated in the app Clock in and clock out timestamp stored for every user based on fingerprint detected. This clocking information is synced to an online db (mysql) Developers who have done a similar project in the past are preferred.

    €1087 (Avg Bid)
    €1087 Gns Bud
    72 bud

    ...von 100 bis 1000 Hz Hardware wäre hierfür (bis zum Step-Motor-Treiber) auch vorzuschlagen bzw. zu entwickeln. Die Ansteuerung der Motorsteuerung/Lichtssteuerung sollte über USB 2.0 erfolgen. LICHTSTEUERUNG Unter Umständen ist auch geplant die Lichtsteuerung (LED-Leuchte) über die Software zu steuern. Dabei kommt ein PWM-Controller zum Einsatz. Die

    €33 / hr (Avg Bid)
    €33 / hr Gns Bud
    3 bud

    ...Application as user interface for dispensing equipment. System • Android Version 4.4.2+ compatibility (may be possible to makes this 6.0+) • Serial read and write using USB OTG and USB to RS232 adapter. • Track usage data • Display always on • Lock Rotation Portrait/Landscape User Interface (Main Activity) • 4 Size Options (identification of selecti...

    €146 (Avg Bid)
    €146 Gns Bud
    5 bud

    Design the PCB, provide the correct drivers and fit the PCB dimensions into the enclosure provide by me.

    €128 (Avg Bid)
    €128 Gns Bud
    28 bud

    I need USB stick designed to install an app on any smart tv.

    €104 (Avg Bid)
    €104 Gns Bud
    1 bud

    small software that can manage with canable usb interface.A page with the info from 10 can ID frames. Send 3 types can frame and get results

    €496 (Avg Bid)
    €496 Gns Bud
    12 bud

    I have a Xamarin Android app that is sending commands via usb connection to Arduino. On certain devices, the connection is not working. Your job is to help troubleshoot why.

    €9 / hr (Avg Bid)
    €9 / hr Gns Bud
    5 bud

    Hello I'm looking for a computer engineer who can help me and do for me scripting or controlling the input and output of the digilent analog discovery 2 and also measu...can also feed input and plot and analyze output and measure the impedance and control the device fully from PC (windows 10), the device can be connected to the PC through a USB cable.

    €166 (Avg Bid)
    €166 Gns Bud
    26 bud

    Hello, I want an application that can search documents with keywords in a usb key. We will have several documents dispatcher in different folders. Contact me for more details

    €167 (Avg Bid)
    €167 Gns Bud
    13 bud

    Your product will connect a Thinkpad T470 internal keyboard to a PC via usb. Full compatibility with a german and an english Thinkpad T470/T480 backlight keyboard is needed, support for the whole range of t470/480-compatible keyboard would be great. requirements: - functionality of all characters/symbols displayed on the keyboard - functionality

    €1390 (Avg Bid)
    €1390 Gns Bud
    10 bud

    Need windows developer who can create autorun functionality for CD. Objective is to whenever someone insets CD in their laptop then CD should auto run and open up page where there should be Two buttons. On clicking of each button respective PDF will open within the application. Below are the specifications required for each CD: 1. Auto run and

    €114 (Avg Bid)
    €114 Gns Bud
    8 bud

    I want a USB stick that runs Windows XP so I can use some of my old programs just by booting from the stick.

    €15 (Avg Bid)
    €15 Gns Bud
    15 bud

    Hello freelancer I am looking for someone, in order to design a project by using Proteus to simulate PIC18F4550 USB-HID Device. in which the microcontroller generated "text or code" and then read this "text or code" by C# Form to show as a label.

    €35 (Avg Bid)
    €35 Gns Bud
    13 bud

    eBook reader that is capable of accessing files (documents) encrypted and hidden in a USB flash drive. The hidden documents will be write protected thus duplication of such documents onto other storage media is prohibited.

    €396 (Avg Bid)
    €396 Gns Bud
    6 bud

    I have had enough problems with some computers and I would like them ...would like them to restart if the device stops emitting power for 30 seconds after it has been turned on. "The first 25 seconds the device does not emit current through the usb, the other 5 seconds of margin, and if the device does not reach current then send the pulse to restart"

    €122 (Avg Bid)
    €122 Gns Bud
    11 bud

    we have ST based microcontroller and we want a developer to develop a USB host for this

    €158 (Avg Bid)
    €158 Gns Bud
    6 bud

    Simple C++ tasks using OPEN-USB-IO (OUSB) board. further details will be provided.

    €47 (Avg Bid)
    €47 Gns Bud
    6 bud

    We need to build a solution which will convert data captured from a USB port (sent to a printer) and convert it to readable format

    €2575 (Avg Bid)
    €2575 Gns Bud
    11 bud

    I need a logo designed screen printing logo for organizer. Content already ready just to create copy white logo themes

    €13 (Avg Bid)
    €13 Gns Bud
    5 bud

    Autorun script (every 1 minute) that collect the body text from a email and then autopost the content to a facebook group automatic. The script will also support multiple autopost process with different emails accounts and groups on facebook.

    €164 (Avg Bid)
    €164 Gns Bud
    14 bud

    My own software was controled license by USB dongle hardware . My USB dongle is Feitan Rockey Dongle Model 2 , I would like to transform the license usb dongle hardware to be image files seem like Using by USB dongle . And compress image file to be installer [login to view URL] Which can be install on Windows . For more detail of my own program

    €860 (Avg Bid)
    €860 Gns Bud
    13 bud

    I need a simple circuit design that interfaces an IMU SPI with FTDI USB chip to talk to computer. The expected circuit is very simple. I can provide the design board specification details.

    €18 / hr (Avg Bid)
    €18 / hr Gns Bud
    41 bud

    Need a STM32 programmer for make a code of conect and read a barcoder reader. It's work with HID class. The MCU selected is a STM32F412RET6.

    €243 (Avg Bid)
    €243 Gns Bud
    18 bud

    Have to build hardware ckt and software code for usb interaction * It includes some buttons * Required Board : LPC2148 *All other details will be shared later *All hardware will be provided by us

    €83 (Avg Bid)
    €83 Gns Bud
    7 bud

    I am looking for some one can help me design a prototype board that can upload program to arduino/AVR by usb stick without computer. I just want to send to client an usb stick included hex file and then they just plug it to arudino/avr to update new program

    €145 (Avg Bid)
    €145 Gns Bud
    20 bud

    We are into new product development and get projects from our clients to develop application for them. When our team is occupied we generally look for outsource

    €198 (Avg Bid)
    €198 Gns Bud
    1 bud

    ...machine settings 2. Setting up DHCP in Virtual box 3. Configuring shared folder for machine 4. Allowing remote access for USB I am still not able to transfer the data between host and get machines, neither directly, nor through USB. Note: 1. You will be paid for only 1 hour. 2. Work through teamviewer / Anydesk only. 3. Bid only if you can start the work

    €3 / hr (Avg Bid)
    €3 / hr Gns Bud
    8 bud

    ...machine settings 2. Setting up DHCP in Virtual box 3. Configuring shared folder for machine 4. Allowing remote access for USB I am still not able to transfer the data between host and get machines, neither directly, nor through USB. Note: 1. You will be paid for only 1 hour. 2. Work through teamviewer / Anydesk only. 3. Bid only if you can start the work

    €2 / hr (Avg Bid)
    €2 / hr Gns Bud
    9 bud

    Required USB token based digital signature (e Token) implementation for document signing on client side, Steps to fololow 1. initially user will attach/register his USB token in web based asp.net C# application. 2. At the time of document signing the application will ask user to place the registered USB token in the system. 3. The user will place the

    €296 (Avg Bid)
    €296 Gns Bud
    6 bud

    i use ubuntu, my claymore software version 9.8 stopped working, and i have zero experience in upgrading to the latest so...latest software of claymore. i need someone to draft a step by step guide or video showing me how to upgrade to the latest version of claymore, using the F2pool. also i need an autorun created to run claymore upon starting the pc.

    €125 (Avg Bid)
    €125 Gns Bud
    5 bud

    Hi there, I'm looking for a dev who can turn my AZ-Delivery ESP-32 into a USB KEYBOARD. I just need to have a function like [login to view URL]("my text!"); that I can use in the loop(). My [login to view URL] : ---------------------------- [env:esp32dev] platform = espressif32 board = esp32dev framework = arduino Thank you in advance Flo

    €128 (Avg Bid)
    €128 Gns Bud
    9 bud

    Has in input from USB with 1 to 100 mV sensor data coming in, Should create an app to read, graphically display and do some inbuilt calculations in a smartphone

    €316 (Avg Bid)
    €316 Gns Bud
    6 bud

    I am looking for a Python for Linux code that will automatically boot from USB. Code must provide a menu offering wifi connect options, and clamAV persistent update to USB. I would like the boot up to continue if no update or wifi is chosen after a 30 second timeout, and run clamAV scan/remove all local drives with text file log/report and results

    €22 (Avg Bid)
    €22 Gns Bud
    1 bud

    ...which requires the client to build a self contained Windows USB Webserver using the Apache Portable Runtime Environment. [login to view URL] The deliverables should be: 1. An executable solution that requires no installation on a Windows PC 2. The Windows exe should be able to be run from a USB stick 3. No external libraries or dependencies should be

    €11 (Avg Bid)
    €11 Gns Bud
    1 bud

    ...create Windows 10 Autorun script when USB is connected to PC. Developer can use any technology for creating this Autorun script. I am having below scenario for this autorun. 1. PC is in shutdown state. 2. Connect USB to PC 3. User starts the PC. 4. Our program in USB drive (Which will execute in Auto run mode) will detect the USB but user will ...

    €59 (Avg Bid)
    €59 Gns Bud
    7 bud

    I am using a windows laptop to trigger the opening of a cash drawer, the cash drawer is currently being opened using an app on my laptop. I want to recr...just want to convert it into a node script. Below I have included screenshots of the code I have written that previously opened a similar cash drawer and the snapshot of the USB packet on wireshark

    €153 (Avg Bid)
    €153 Gns Bud
    1 bud

    Required USB token based digital signature implementation for document signing on client side, Steps to fololow 1. initially user will attach/register his USB token in web based asp.net C# application. 2. At the time of document signing the application will ask user to place the registered USB token in the system. 3. The user will place the USB token

    €140 (Avg Bid)
    €140 Gns Bud
    3 bud

    We have developed a web based application for digitally signing the document by USB Token and its working on localhost, but its not working on IIS, now need to configure the IIS 7.5 and 10 for same.

    €30 (Avg Bid)
    €30 Gns Bud
    2 bud

    What we need: - logo - brand identity (colors, font, and tech/fun assets) - 1024x570 - banner using the logo and tech/fun assets made Examples of tech/fun assets - Best: [login to view URL] - Good: [login to view URL]@[login to view URL] - Ok: [login to view URL] *Completion by Friday - must be available to work weekends if revisions needed*

    €50 (Avg Bid)
    €50 Gns Bud
    21 bud