Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    6,370 arm jobs fundet, i prisklassen EUR

    Azure Automation expect with good knowledge in developing ARM templates, powershell scripts as per requirements.

    €549 (Avg Bid)
    €549 Gns Bud
    3 bud
    Implement RRT algorithm 6 dage left
    VERIFICERET

    I have a 3-link planar robo...reach from its start point to its goal by avoiding obstacles. The implementation is as shown in attached I need an RRT implementation to show graphically the possible paths the arm can travel in. You can assume any initial (θ1, θ2, θ3) and final pose values (θ4, θ5, θ6), I will change these when I implement it here.

    €186 (Avg Bid)
    €186 Gns Bud
    10 bud

    ...finish ongoing PHP project as the current developer just left. The project is: The web interface for configuration of the video streaming device. The web runs on embedded ARM with custom linux build. Everything must be done localy because the device will have no acces to the internet mostly. The ongoing work is done for php 7.1, Nette 2.4 and sqlite

    €176 (Avg Bid)
    €176 Gns Bud
    4 bud

    ...finish ongoing PHP project as the current developer just left. The project is: The web interface for configuration of the video streaming device. The web runs on embedded ARM with custom linux build. Everything must be done localy because the device will have no acces to the internet mostly. The ongoing work is done for php 7.1, Nette 2.4 and sqlite

    €135 (Avg Bid)
    €135 Gns Bud
    1 bud

    ...Requirements: 1. Design on kernel 4.4 and above 2. No GUI, all rules from scratch 3. Iptables + xt_bpf knowledge is a must. I need super fast packet routing here 4. All happens on ARM If you don’t know anything about bpf module and routing at driver level, please don’t contact. All linux networking pros with knowledge in this - very welcome. I just need

    €157 (Avg Bid)
    €157 Gns Bud
    4 bud

    Hey, We are looking for bright ideas and solutions to our above mentioned description , A user clicks or makes his video and the app is supposed to generat...our above mentioned description , A user clicks or makes his video and the app is supposed to generate a 3d model and after to which we get his/her body dimensions eg chest ,arm , waist size etc.

    €155 (Avg Bid)
    €155 Gns Bud
    2 bud
    Read Brain signals when body move 5 dage left
    VERIFICERET

    ...brain, specific nerves based on the respective movement and in the muscle (Some times other muscle receive the signal too even when they arent the one being moved. Ex: Moving an arm, the shoulder receive the signal too.) What I need? - I need someone with the knowledge and tools available (Maybe an EEG Machine) who can show me in a report: 1. All body parts

    €189 (Avg Bid)
    €189 Gns Bud
    7 bud

    Hello Very urgently need small ARM assembly based project done . It has to input the string data, check if its reverse is same or not. Please check attached file carefully and reply if you can do it urgently

    €86 (Avg Bid)
    €86 Gns Bud
    4 bud
    Design a hoodie & hoodie dress 5 dage left
    VERIFICERET

    ...on (only parts or the pattern can be used in black/faded color in bigger areas) Would like to also add the slogan: "GET BACK IN THE GAME" The slogan can be written down the arm or the bottom part of the dress. Ive added some dresses that I like as well as something Ive quickly designed just to give you an idea of what I have in mind. Al well as the

    €85 (Avg Bid)
    €85 Gns Bud
    33 bud

    The outcome should be a headshot including the shoulders of the man on the right. I would like someone to edit the arm from around his shoulders. Please keep the same background. Ideally from the top of the shirt pocket up. The image is too large to upload, so here is the link to the Dropbox folder that has the image in it. If you could export it

    €15 (Avg Bid)
    Garanteret
    €15
    27 indlæg

    The outcome should be a headshot including the shoulders of the man on the right. I would like someone to edit the arm from around his shoulders. Please keep the same background. Ideally from the top of the shirt pocket up. The image is too large to upload, so here is the link to the Dropbox folder that has the image in it. If you could export it

    €14 (Avg Bid)
    €14 Gns Bud
    11 bud
    Trophy icon Vector Logo design Udløbet left

    Business name is A & B Groundworks LLC. Need log...& B Groundworks LLC. Need logo made with "A & B" "Groundworks LLC" under the A & B have an excavator in line art with a little coloring on the right side of A & B. Excavator arm going over the A & B scooping dirt on the left side. Need to have John Deere Heavy Equipment Yellow, then black. for col...

    €65 (Avg Bid)
    €65
    84 indlæg

    we want you to create a software where in we input two images of a person and the person's height is known u have to give me the dimen...create a software where in we input two images of a person and the person's height is known u have to give me the dimensions of different body parts like chest, waist,thighs,arm length,leg length,shoulders,biceps etc

    €831 (Avg Bid)
    €831 Gns Bud
    1 bud

    we want you to make software using opencv where in we input two images of a person and the person's height will be known and you need to giv...opencv where in we input two images of a person and the person's height will be known and you need to give me dimensions of different body part like chest,waist,thighs,leg length,arm length,shoulders,biceps etc

    €831 (Avg Bid)
    €831 Gns Bud
    1 bud

    we want to make a software where in we input two images of a person and the height of the person will also be known....you need to give me different dimension...input two images of a person and the height of the person will also be known....you need to give me different dimensions of the body like chest waist shoulders thighs leg length arm length etc

    €1069 (Avg Bid)
    €1069 Gns Bud
    1 bud

    we want you to develop a software where we put two images in desired position and height of the person will be provided to you and you need to give me t...images in desired position and height of the person will be provided to you and you need to give me the dimensions of different body parts like chest,waist,thighs,leg length,arm length shoulder etc

    €1069 (Avg Bid)
    €1069 Gns Bud
    1 bud
    Trophy icon finish my tattoo design 2 dage left

    ...and green lines continue to sort of meet with a skeleton of a fish in the middle. The more white in the design the better as it's less tattoo work on a sensitive part of my arm. There's not a lot of room there so the less small details the better. I have attached a video of the whole tatto so you can see the theme. The theme is gratefuld dead type

    €96 (Avg Bid)
    Garanteret
    €96
    35 indlæg

    ...do you want. He is keeping some rolled plan project in his right hand and rise it. I have an idea for you. He comes closer to the table and makes the table clear with his arm than put his plan on the table and show him what he needs. Making zoom in to plan and goes one house's inside. House is old and needs revisions. They both checked house looks

    €266 (Avg Bid)
    €266 Gns Bud
    36 bud

    ...database. Other special reports, for example, Company Focus, are available from the Financial Times Share Service, or brokers’ circulars issued from time to time by the broking arm of numerous finance houses. Data can also be found online from the company websites, [log ind for at se URL], [log ind for at se URL] and other internet sources....

    €146 (Avg Bid)
    €146 Gns Bud
    24 bud

    ...robotic arm and Handrail. The MIS will be mounted to the free end of the robotic arm, though no consideration of how the mounting will occur is required for this challenge. How it works: When a normal force is applied to the MIS, it must prevent slipping and/or twisting (between itself and the Handrail) due to normal motion of the robotic arm.

    €437 (Avg Bid)
    Fremhævet Haster Forseglet Topkonkurrence
    €437
    0 indlæg

    Design a Robotic Arm Software Architecture (RASA) In this challenge, you are asked to design the Robotic Arm Software Architecture (RASA) that will autonomously control a separately designed robotic arm. The RASA will receive all high-level commands from Astrobee and implement them autonomously through the robotic arm. Locations and ranges of motion

    €437 (Avg Bid)
    Fremhævet Haster Forseglet Topkonkurrence
    €437
    0 indlæg
    Trophy icon Love Bird Tattoo Drawing 23 timer left

    Two Love Birds perched on a branch. One is an evil bitch and the other is an exhausted husband. This drawing is for a tattoo on my hand. The theme on the entire arm is Hawaiian / Polynesian. The tattoo should start at the bottom of the pink flower in the picture and go to the knuckles. The background needs to be visible, not blurry, with flowers

    €131 (Avg Bid)
    Garanteret
    €131
    9 indlæg
    Trophy icon Create Logos for new sunglass brand 21 timer left

    ...for our new sunglass brand that will be focused on high-end, yet affordable lifestyle eyewear. The logo will be made of metal and/or foil and will be attached to each temple(arm) of the sunglass. We will also need a shortened version of logo for smaller and skinnier frames that don't have enough space for full logo. The brand name will be Heist

    €437 (Avg Bid)
    Fremhævet Garanteret Forseglet Topkonkurrence NDA
    €437
    806 indlæg

    ...function like traveling time and traveling space and • High reliability in obstacle avoidance application. This paper proposes genetic algorithm trajectory planning for robot arm by adopting direct kinematics and inverse kinematics ****skill needed Python, Matlab&Mathematica, Simulink, Android, PHP, Node.js...

    €138 (Avg Bid)
    €138 Gns Bud
    4 bud

    Requirement two-way audio/video SIP based communications form the mobile phones to Asterisks on ARM based targets and web browser targets

    €30 / hr (Avg Bid)
    Lokal
    €30 / hr Gns Bud
    3 bud

    TX s...sending a signal to another board to trigger code when a button is pressed on the first. I am using [log ind for at se URL] [log ind for at se URL]

    €19 (Avg Bid)
    €19 Gns Bud
    3 bud

    ...Cameras) Land Surveying with Drones (Board Cameras) Agriculture (Pick and Place Roboter with mounted camera system) Large Object Scans (Stereo Camera System mounted on roboter arm) Smart Logistics Systems Autonomous Vehicles (car) registration number recognition (Automatic Payment for Parking) Medical Diagnostics and Assistance You can also think

    €349 (Avg Bid)
    €349
    13 indlæg
    Vector Logo Needed Udløbet left

    I need a vector logo created for: - Website - Website favicon - Mobile App (iOS/Android) - Print This is for a fitness application. Must incorporate a flexing bicep arm and an eye in a stylish, modern way. Follow the golden ratio.

    €251 (Avg Bid)
    €251 Gns Bud
    129 bud
    Trophy icon Graphic piece or artwork image Udløbet left

    I need to create a humorous image that I can print the si...person will be on a mountain bike riding through the mountains wearing a red and black checker sleeveless shirt with a collar. The person will have extra long arm pit hair blowing from his arm behind him in the wind and tickling the nose of the rider behind him. This is a birthday gag gift.

    €87 (Avg Bid)
    Garanteret
    €87
    11 indlæg

    ...feature the band's name logo within the centre of the badge instead of the wording seen on the uniform badge. The band's name logo will appear in the centre. An animated human’s arm holding a simple item will appear within the circular badge area next to the band’s name logo. Budget of £50, please state what your minimum and maximum total price will be

    €85 (Avg Bid)
    €85 Gns Bud
    20 bud

    ...tracking: 1. User's head center, 2. shoulder spine (center), spine, middle spine, and base spine joint points. 3. shoulder left, and shoulder right points. 4. left arm elbow and right arm elbow 5. Left hand wrist and right hand wrist. 6. left hand palm center, and right hand palm center. and 7. recognize user hands "Open" and "Closed" and "Lasso&qu...

    €19 (Avg Bid)
    €19 Gns Bud
    2 bud

    Need FreeRTOS demo for Atmel SAM3S and SAM3X ported to Rowley Crossworks for ARM Dev platform from Atmel Studio for further development.

    €218 (Avg Bid)
    €218 Gns Bud
    2 bud

    I have an existing Azure Resource Manager template that I would like to translate into an Amazon Cloud Formation Template. The components of the ARM template are simple. It deploys compiled .net 4.6 code from github to an Azure Web App (64 bit) and creates an Azure Sql Database based on a bacpac file and modifies the [log ind for at se URL] with the appropriate

    €185 (Avg Bid)
    €185 Gns Bud
    11 bud

    I need a graphic created that I want to inclu...needed. I am envisioning the following: A flying "Superman" and a "Superwoman" with the words "Class Hero" on the back of their capes. With their one arm stretch out in the flying position, their other arm/hand is holding an oversized $100 bill between the two of them. (we pay $100 for our referrals)

    €93 (Avg Bid)
    €93 Gns Bud
    24 bud
    Arduino code -- 2 Udløbet left

    ...lower an arm 90 degrees using a gear attached to a stepper motor. The arm will be raised by pressing a button on an IR remote. Once raised, the arm will remain raised until a sensor attached to the arm senses an impact above a certain threshold OR until a period of 10 seconds has passed. Once the sensor is activated OR 10 seconds pass, the arm will be

    €133 (Avg Bid)
    €133 Gns Bud
    22 bud
    Trophy icon Illustrate 2 MMA Fighter 11 dage left

    ...or soemthing else - 2 highly agressiv Fighter fighting each other - 2 Fighter , one Winner one Looser but both gave Respect to each other (maybe Winner holding Looser Arm up to show both are Winner and have respect. Looser looks damaged) - Both Fighter fight to theyr own limit - no one give up Requirements: 1 Color 3000x3000 PX with

    €100 (Avg Bid)
    Fremhævet Garanteret
    €100
    32 indlæg

    ...this is what sends them I know my php code works because it updates them when I type them in the url if you cant do in a couple hours please do not bid I dont want to pay a arm and a leg for this seeing I have already paid so much money for this project...

    €31 / hr (Avg Bid)
    €31 / hr Gns Bud
    9 bud
    Trophy icon Build us a corporate logo Udløbet left

    ...why to act virtuously and encourage practical virtue, excellence of character, in others. The company will have two main branches: business and philanthropy. The business arm will be an international partnership platform in diverse sectors to serve its stakeholders (customers, employees, suppliers, community, environment, shareholders, authorities

    €26 (Avg Bid)
    Garanteret
    €26
    61 indlæg
    3d model - Menorah Udløbet left

    A "menorah" is a 9-arm candelabra arranged as a 4-1-4 where 4 arms on each side are the same height as each other and the center arm is higher (e.g. [log ind for at se URL]) A menorah will typically have small holes at top of the arms to either hold candles or glass cups in which to put candles (e.g. [log ind for at se URL]

    €11 / hr (Avg Bid)
    €11 / hr Gns Bud
    27 bud

    I am a keyboardist and since I get to travel a lot by plane my dream keyboard would be a mix between the CME xkey, ca...too on my Mac laptop, it would be great to have a touch strip for example on the keyboard that shows all the sound patches names and icons under the faders so it allows you to arm a track on the spot. Being bluetooth would be a plus.

    €423 (Avg Bid)
    €423 Gns Bud
    10 bud

    I need an working code of Frequency Counter using Period Measurement for LPC1768 in IAR ARM 6.3 I have try with this example but when debug goes in break if I activate Timer2 IRQ [log ind for at se URL]

    €56 (Avg Bid)
    €56 Gns Bud
    4 bud

    Vær venlig at Tilmelde dig eller Log ind for at se detaljer.

    Fremhævet Forseglet Topkonkurrence

    1 x poster graphic explanatory graphic including stages of medical cancer research 50 x individual graphics relating to research including ultrasound transducers, robotic arm, tumor cells and nano particles. Visual Storyboard Poster This is a poster/info-graphic that would be a succinct visual way of communicating the clients research in a way

    €2260 (Avg Bid)
    €2260 Gns Bud
    81 bud

    I have a device with ARM Fujitsu MB86R0x “Jade-L” chip running QNX and has proprietary device dependent embedded images (built with Altima Designer). I want to be be able to change embedded images. I need to know how to make one from png/jpg. You can check the attached image sample. If you can decode it, the job is yours...

    €162 (Avg Bid)
    €162 Gns Bud
    2 bud
    Design project Udløbet left

    Help design a tattoo for the left arm. Going to be from an inch off the wrist. Design is the history of the Infantry.

    €272 (Avg Bid)
    Fremhævet
    €272 Gns Bud
    41 bud
    lcd interface board Udløbet left

    We have an LCD with an LVDS interface that we want to drive from an ARM board with 24-bit parallel LCD interface. The board runs on 3.3V for logic levels and power supply. The display uses offset voltages of +20V, -6.8V, +11V that need to be generated. The backlight consists of on string of LEDs that need to be driven at 9.6V with 160-180mA. The parallel

    €146 (Avg Bid)
    €146 Gns Bud
    7 bud

    About Us - IB Experts for 7 on 7 Pvt Ltd. is a team of experienced professionals from the field of science & technology whose wide experience in teaching ...mission is to build a multi-dimensional centre for "Physics" that not only focuses on the theoretical aspect of the subject, but should also focuses equally on the experimental arm of the subject.

    €91 (Avg Bid)
    €91 Gns Bud
    1 bud

    i would just like to slim down my arm a little in a photo if possible

    €10 (Avg Bid)
    €10 Gns Bud
    14 bud

    ...on-fault-gdb-and-valgrind-output-included/52610559?noredirect=1#comment92163351_52610559 Source code is here - [log ind for at se URL] This is ARM build. To reproduce it I can share full notes I have which can be helpful in preparing for the build to satisfy all requirements. Or otherwise if you spot an issue in the code

    €150 (Avg Bid)
    €150 Gns Bud
    13 bud
    Grammy's Logo Udløbet left

    My business name is Grammy's Gone Quilting. It is mostly a long arm quilting business with other custom jobs if needed. I am just getting started but need something to put on soccer jerseys as I am sponsoring a team. Not sure exactly what I want as a logo, but I am attaching a couple of ideas that my family and I have...The quilt block is one that

    €69 (Avg Bid)
    €69 Gns Bud
    54 bud

    Top arm Community-artikler