Arduino smoke detectorJobs

Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Færdigheder
Sprog
    Job-status
    2,000 arduino smoke detector jobs fundet, i prisklassen EUR

    ...unable to update firmware remotely, the OTA process is not reliable and the encrypted firmware updates are failing. - **ESP32 Background Information:** I'm using an ESP32 Development board for this project. The application running on this hardware was developed using Arduino. - **Necessary Skills Most Needed:** A freelancer with advanced knowledge of ESP32 and an understanding of the OTA process including familiarity with encrypted firmware updates will be best suited to tackle this issue. Proficiency in Arduino is also necessary. Given that this project deals with the inability to update firmware remotely, familiarity with networking would be an added advantage. Connecting to XXX W (84) wifi: wifi nvs_open fail ret=4353 E (84) wifi: wifi_init 1410 ret=...

    €463 (Avg Bid)
    €463 Gns Bud
    4 bud

    skal bruge færdigt projekt til: wifi data. sende en e-mail når en knap aktiveres der skal tilkobles 2 knapper der skal send forskellige beskeder der skal bruges dns da ip ændre sig skal kunne modtag data til at tænde led skal kunne gemme data hvis forbindelse svigter og sende når der er forbindelse igen

    €87 (Avg Bid)
    €87 Gns Bud
    2 bud

    I'm seeking a skilled mechanic to diagnose and repair an issue with my Yanmar 2GM engine. Key Details: - The engine is exhibiting signs of water contamination in the oil. - I haven't observed any additional symptoms such as misfiring, excessive exhaust smoke, or oil leaks. However, a thorough inspection would be beneficial to rule out other potential issues. - This project needs completion within a month. Ideal Skillset: •Experience in engine diagnostic and repair •Specific knowledge and hands-on experience with Yanmar 2GM engines •Ability to execute repairs within a strict timeline.

    €37 / hr (Avg Bid)
    Lokal
    €37 / hr Gns Bud
    9 bud

    I'm strategically seeking a professional who can code a mobile application using Flutter and Dart and integrate it with Arduino. This primarily demands the construction of a stunning, user-friendly app with the entire focus on sensor integration. Core App Functionalities: - User login and log out with figma or flutter - Context widgets utilization - Complying with w3 thing description Sensor Integration: My project revolves around incorporating multiple sensors, including but not limited to: - Temperature sensor - Heart rate sensor - Galvanic skin response Ideal Skills and Expertise: - Mastery in Flutter and Dart - Arduino integration know-how - Experience with user-interface and user-experience design - Proven track record of developing sensor-based apps An ideal c...

    €28 / hr (Avg Bid)
    €28 / hr Gns Bud
    72 bud

    Sono un privato e sto cercando assistenza per sviluppare un’app per smartwatch, inizialmente Android e in seguito forse anche IOS, con un budget piuttosto limitato (1500-2000€). Ho già scritto un codice Arduino con buona parte delle funzionalità che gira su uno smartwatch dev board.

    €1216 (Avg Bid)
    €1216 Gns Bud
    24 bud

    ...for this project includes: - Remote device management: The ability to manage connected devices remotely is crucial for this project. - Data logging: It is important for the system to be capable of accurately logging data from devices. Considering my preferences, the successful developer should have expert knowledge and experience with: - Arduino: Familiarity with Arduino's BLE/LORA is a requirement. You should have prior experience coding in Arduino / C++. [- Flutter: I've chosen Flutter as the platform for the software development. Correspondingly, knowledge of Flutter is crucial for this role as user will set up the Gateway through Mobile Phone] [- AWS: The software will use Amazon Web Services for the remote management of data. As such, experience with A...

    €443 (Avg Bid)
    €443 Gns Bud
    66 bud

    As an Arduino and Python developer, I'm looking for expertise to create a comprehensive flowchart that outlines the logic and working of an existing Arduino and python code. This is an essential task to me because I want to understand the sequential order of operations, from start to end. Main Focus: - Emphasizing the relationship of different features coded, and their flow from start to completion. - As one knows, the different parts of the Arduino code work together in achieving specific output, hence, a skilled understanding of the code's hierarchy is of great relevance. Ideal candidate: - Proficiency in Arduino and Python language. - Strong experience in flowchart development. - Ability to analyze complex scripts and map process flows. - Detail-...

    €19 (Avg Bid)
    €19 Gns Bud
    15 bud

    I'm seeking a proficient developer to create an Arduino IoT cloud interface for an Arduino Uno R4 WiFi version. The project requires integration with multiple sensors including the DHT11 Temperature and Humidity Sensor, BMP280 Barometric Pressure Sensor, BH1750 Light Sensor, MQ135 Gas Sensor, GUVA-S12SD UV Sensor, and a Soil Moisture Sensor. Key functionalities should include: - Real-time monitoring of data from the connected sensors data logging of sensor readings, which should be executed every minute - Remote control over the system Ideal candidates should bring experience in Arduino programming, IoT implementation and familiarisation with the listed sensors. Enhance your bid by showcasing related projects you've completed or detailing your proposed appr...

    €22 (Avg Bid)
    €22 Gns Bud
    7 bud

    I am working on some electronic project and I am using voltage sensor current ,ultrasonic,screen ,tower light MOSFET module Arduino and need coding for the project

    €17 (Avg Bid)
    €17 Gns Bud
    9 bud

    I need a modern graphic designer who can create a vibrant and bold logo for my BBQ restaurant, Hell Yeah BB...designer who can create a vibrant and bold logo for my BBQ restaurant, Hell Yeah BBQ. The style should reflect our slogan, "BBQ that makes you say HELL YEAH". Key Requirements: - Incorporate the colors red and yellow prominently in the design. - Employ a bold and vibrant design style, embodying the spirit of our BBQ restaurant. - Integrate images of grills or smokers, BBQ food items, and flames or smoke into the design. The perfect applicant should have a strong background in vibrant, bold design, ideally with experience in creating logos for restaurants or food establishments. Proven experience in vector graphics is a plus, as the logo will need to be scalable...

    €9 (Avg Bid)
    Fremhævet Garanteret
    €9
    196 indlæg
    Scrapping - PHP Code Troubleshoot 6 dage left
    VERIFICERET

    I am in need of an expert in any server-side language to review and fix my web scraping code, which recently stopped functioning since this morning. I think the website implemented a bot-detector and may require a captcha solving. for NOW and must be fixed asap. Please don't use AI to respond to the bid, it's very noticable.

    €118 (Avg Bid)
    €118 Gns Bud
    104 bud

    I'm seeking a jack-of-all-trades in design and tech; someone with vast capabilities in graphic and UI/UX design, as well as game ...UI/UX design, as well as game design for iOS platforms. The scope extends to drone and Raspberry Pi projects, in addition to web design. Your proficiency in embedded systems programming, web development, mobile app development, Arduino, and video game design will be crucial. Understanding a beginner's perspective will be key, as the project requires design and coding deliverables easy for beginners to grasp and use. Key Skills & Experience: - Graphic, UI/UX, Web and iOS game design - Coding prowess in Web & Mobile app development - Proficient with Raspberry Pi, Arduino and Drones - Game Design and Development - Aptitude to bre...

    €19 / hr (Avg Bid)
    €19 / hr Gns Bud
    86 bud
    PHP Scrapping Code Troubleshoot 6 dage left
    VERIFICERET

    I am in need of an expert in any server-side language to review and fix my web scraping code, which recently stopped functioning since this morning. I think the website implemented a bot-detector and may require a captcha solving. for NOW and must be fixed asap.

    €120 (Avg Bid)
    €120 Gns Bud
    66 bud

    I am in need of an expert in any server-side language to review and fix my web scraping code, which recently stopped functioning since this morning. I think the website implemented a bot-detector and may require a captcha solving. for NOW and must be fixed asap.

    €117 (Avg Bid)
    €117 Gns Bud
    73 bud

    I am seeking an experienced Electronics professional adept at designing, assembling and installing PCB boards with mixed components. The tech stack is Industrial Linux PC, Arduino, various sensors and the PCB for signal processing. You need to live in Oost/West-Vlaanderen, Belgium. We are having work for 5-10 days a month, both on-site in Leuven, as on-site at our customer in Wielsbeke.

    €39 / hr (Avg Bid)
    €39 / hr Gns Bud
    7 bud

    I'm looking for a skilled photographer to conduct a professional photoshoot of a DJ set in a studio with a futuristic ambiance. The following requirements should be duly noted: - Shots should be predominantly set ...a skilled photographer to conduct a professional photoshoot of a DJ set in a studio with a futuristic ambiance. The following requirements should be duly noted: - Shots should be predominantly set in a studio. - The studio's setting should emanate a futuristic vibe. - The photoshoot should include DJ equipment and smoke/light effects as props. A prospective freelancer should ideally have: - Expertise in studio photography. - Experience in creating dramatic effects with smoke and lights. - Knowledge about DJ equipment. - Ability to convey a futuristi...

    €23 - €292
    Lokal
    €23 - €292
    0 bud

    I'm seeking a highly skilled individual to create a PCB layout for prototyping my electronic project. You need to have mastered KiCad software, as that's my preferred choice. The design will primarily involve surface-mount technology components. This project invovles an MQ 9 Sensor, Arduino Nano and a MG811 SEN0185 Gas sensor Proven experience in similar projects will be a plus. Further information will be provided

    €140 (Avg Bid)
    €140 Gns Bud
    34 bud

    I'm urgently in need of a C++ code that will make my Arduino Uno and ESP01 WiFi module communicate effectively. In particular, my goal is for this code to allow the Arduino to read DHT11 temperature and humidity data, and then transmit that data to ThingSpeak. I've already set up my Arduino Uno and ESP01 WiFi module, so I'd like for you to jump straight into the coding aspect. Anyone with a strong background in C++, Arduino and IoT will be the perfect fit for this project. • Skills: C++, Arduino IDE, ESP01, IoT • Requirements: C++ code that interfaces Arduino with ESP01 • Deliverable: A working C++ code I need this done as soon as possible. Your prompt response will be greatly appreciated.

    €47 (Avg Bid)
    €47 Gns Bud
    24 bud

    As a client, I need a proficient coder to generate an Arduino Uno code written in MATLAB. This is crucial for reading data from my MCP3424 A2D converter across all its 4 ports cyclically. The focus is on voltage measurements, for which the code should be tuned to sample at a low-speed rate, yielding less than 100 readings per second. The code should use the MATLAB Hardware support toolbox for this purpose, and consequently, solid experience with this toolbox is an asset. Familiarity with I2C communication for reading device registers is also vital. Key expectations: - Real-time graphical plots of the data - Capability to save the data in a .mat file for later examination - Implementing a circular reading system for all 4 ports Preferred skills: - Mastery of MATLAB - Strong back...

    €102 (Avg Bid)
    €102 Gns Bud
    9 bud

    We are making a bidirectional EV charger. We need to obtain switching waves with 180° phase shifter as well as an inverted wave with same criteria. Both this wave should be obtained using Arduino.

    €25 (Avg Bid)
    €25 Gns Bud
    9 bud

    This project involves utilizing an Arduino NANO with PN532 to send APDU commands for authenticating a contactless smart card. The purpose of this project includes: - Reading and communicating with a contactless smart card - Extracting specific data fields for authentication: both Unique Serial Number (UID) and Application Data (ADF) Freelancers interested in this project should possess strong skills and experience in working with Arduino NANO, PN532 and APDU commands. Understanding of contactless smart card authentication processes will be an added advantage. A successful delivery will entail a functional system that communicates and authenticates the contactless smart card as described.

    €472 (Avg Bid)
    €472 Gns Bud
    15 bud

    ... The menu should be funky, fun, and energetic while still maintaining a level of professionalism and seriousness. background music should play automatically, cannabis culture classic's like cypress hill 'i want to get high' Key Elements: Cannabis Culture Representation: The menu should capture the essence of the cannabis culture, Incorporate elements such as cannabis buds/leaves, smoke clouds( maybe smoke can slowly float across the screen like a christmas graphic has snow on a website during december ? ), and iconic symbols associated with cannabis culture. British Influence: Infuse the design with British vibes, drawing inspiration from the nations bold and expressive aesthetic. Use English fonts, vibrant colors, and urban street art elements to al...

    €175 (Avg Bid)
    €175 Gns Bud
    50 bud
    Trophy icon No Vape No Smoke Office Signs 1 dag left

    I'm seeking a freelancer to create a 4x4 inch "No Vape No Smoke" sign. - Requirements: • Design a professional "No Vape No Smoke" sign • Size of the sign: 4x4 inches • - make sure the cutline is a different layer - Plotting and vector cut line - two cutlines should be there on this file - one with 2mm space between logo and cutline - one just along the edges - 2 files one with dimensions displayed other with artwork and cut contour lines. - Should be able to change color of each element in file with just click and fill. - Text should be editable (words, font and color)

    €6 (Avg Bid)
    Garanteret
    €6
    22 indlæg

    I'm looking for an experienced Arduino programmer to help me with a particular task. The primary aim is to write specific pieces of code that integrate an LCD screen and a SIM800L GSM module with my Arduino project. I want you to create a script for Arduino Uno R3 that with a 16x02 LCD screen with I2C bus will put ">/" at the beginning, there will also be three buttons: one in the middle, one on the right and one on the left. The one on the left will not do anything for the moment, the one in the middle will ensure that when you press it once, a "0" will appear right after ">/", if you press it once more, the "0" will be removed " and in its place a "1" will appear, if you press it once more, the "1...

    €21 (Avg Bid)
    €21 Gns Bud
    15 bud
    Trophy icon A business card for a vape shop 4 dage left

    I have a vape shop and I need a barcode on the back of the business card that leads to our shop on Google Maps Zeus smoke shop and in the front of the card our Zeus logo plus the phone number plus the address plus the social media logos Instagram, Snapchat, Facebook, Yelp. Address: 12010 Louetta Rd, Houston, TX 77070 Phone Number : 281-966-8766 I will be providing the Png of the logo plus the barcode I made however if you can make a nicer barcode then go ahead.

    €19 (Avg Bid)
    Garanteret Topkonkurrence
    €19
    248 indlæg

    I'm seeking a skilled graphic designer to revitalize and modernize my company's logo. The desired design is: • Modern and minimalist • Predominantly gray toned with hints of dark green • Incorporates nature elements and abstract shapes • Emphasizes the company's focus on climate change • Features a "smoke effect" on a letter 'S' Additional details: • The company name must be clearly conveyed in the logo design • I have certain visual expectations in line with our commitment to climate change, so I look forward to seeing your creative interpretation of these requirements. Ideal Experience: Any freelancer interested in this project should have proven experience in contemporary logo design, with a strong portf...

    €50 (Avg Bid)
    Garanteret
    €50
    310 indlæg

    I require an experienced Arduino programmer to develop a program responsive to 6 to 9 12-volt inputs to control corresponding 6 to 9 12-volt outputs. This program will be communicated via a wired connection from a control pad. Key programming requirements include: - Expertise in coding combinational logic. The output sequences will be determined based on this specific model of logic. - Familiarity with motors and other electronic devices, as these will be the intended interaction systems for the outputs. Please showcase in your bid evidence of your technical knowledge in creating similar systems and any additional Arduino programming skills you think may benefit the project.

    €499 (Avg Bid)
    €499 Gns Bud
    51 bud

    Hi Sri Mahana M., I would like to entrust you with the development of a project for the integration of a connected heart rate sensor.

    €70 (Avg Bid)
    €70 Gns Bud
    1 bud
    Electric Spark Detection 2 dage left
    VERIFICERET

    I'm i...in close proximity. Key Requirements: - The circuit should be sensitive to the electric spark up to 30cm. - Upon detection, it should trigger a signal for about 100 to 400ms. This integration aspect is crucial as the electrical signal will be interfaced with other systems, not an audible or visual response. - system needs to be immune from other non-spark-like event as sound amplifier, small smoke generation AC pump in vincinity (but can be at more than 30 cm of the circuit) - circuit should run at 3.3v and generate a detection signal at 3.3v too. Signal will be push-pull. - only schematics is needed, but with some proof of validity. - circuit must not rely on light detection. It must detect EM perturbations with the most probable signature for the source. - avoid m...

    €134 (Avg Bid)
    €134 Gns Bud
    21 bud

    As a wholesale business, we specialize in a variety of glass products. We are currently looking for a talented inside salesperson who can pitch our products to a specific target market: Smoke Shops. Skills and Experience: - Proven B2B sales experience - Familiarity with the retail and/or wholesale industry - Knowledge of the smoke shop market or similar industries - Experience in selling glass products will be a plus Job Role: - Reach out to potential smoke shop clients - Showcase our unique glass products - Establish and maintain relationships with clients - Work towards achieving sales targets We appreciate a competitive spirit and a drive to succeed. If you believe you match this description, we would love to hear from you.

    €4 / hr (Avg Bid)
    €4 / hr Gns Bud
    13 bud

    this is for a mairjuana brand for our company in Michigan where marijuana is legal. We are starting a brand and need good designs for it. I am looking at two different names. The first name being Toke I am looking for smoke letters. I would like the joint to be at the start or the bottom of it then smoking coming out of with the letter toke. The second name is Best Buds. Looking for an animated picture here. Two friends smoking a joint along with a picture of two animated marijuana nugs under the name. The best buds at the top, two friends under it then followed by two animated marijuana nugs. More details: Is this project for business or personal use? For starting a new enterprise What information should successful freelancers include in their application? Th...

    €116 (Avg Bid)
    Fremhævet Garanteret
    €116
    514 indlæg

    I'm seeking an experienced electrical engineer to participate in the circuit design phase of a home automation project. Your main task includes: - Designing the circuitry and wiring for a modern home automation system I anticipate the project's complexity to be at an intermediate level. You should be familiar with microcontrollers, particularly Arduino or Raspberry Pi. Demonstrated experience in home automation systems will be highly regarded. Having a solid understanding of good circuit design principles, strong problem-solving skills and the ability to work independently are essential for this role. Thanks for considering my project. I look forward to working with you.

    €23 (Avg Bid)
    €23 Gns Bud
    10 bud

    Connecting chip timing results from our Orbiter4 software to RunSignUp's API so as runners pass our detector at the finish the results are passed from our computer to Run Sign UP so they can be shown on the runners mobile phone. The programming on both sides are complete as we have RESTful Interface and Run Sign up has the API and complete mobile application. More can be found here... For the purpose of my project, I am looking to integrate transaction data through an API connection. The primary goal is to enhance functionality and streamline operations. Here’s what the successful freelancer will need to address: - The API will be integrated with a proprietary platform handling race results. - The primary task would be to enable the reliable transfer

    €2193 (Avg Bid)
    Fremhævet
    €2193 Gns Bud
    24 bud

    Necesito un timbre para un colegio que funcione en base a un Arduino UNO, un display de 16x2 con interface I2C, un reloj de tiempo real RTC3231 el cual estará encargado de guardar la hora, fecha y los timers de cuando sonará la alarma durante cada día, pulsadores UP / DW para programar los días, horas, minutos y también los segundos en que la alarma o timbre sonará. Pulsadores para confirmar la fecha, hora, minutos y segundos de programación. Debe sonar por lo menos en 6 períodos por día (entrada y salida del colegio, en los recreos o breaks, comienzo y termino de cada período de clase). El Arduino debe activar un relé el cual activará un timbre. El Arduino también debe tener un...

    €67 (Avg Bid)
    €67 Gns Bud
    15 bud

    For this project, I need an Arduino programming expert. I've created a prop airsoft bomb initially designed in Autodesk Tinkercad. All files are ready and in working order, but I would like some adjustments made to the programming. The updated code will need to work with a 16x2 LCD screen communicating through I2C. The following changes are needed: Duel button disarm function Opening screen reading clean up the progroam * Display a countdown timer that starts from 00:00:00. This timer should only start when triggered by a button press. * The LCD screen should also show user instructions. The specifics for those instructions will be provided after hiring. Expertise needed: * Proficient in Arduino programming * Experience working with 16x2 LCD screens and I2C commu...

    €19 (Avg Bid)
    €19 Gns Bud
    7 bud
    Arduino Automation Engineer 13 timer left
    VERIFICERET

    Project Specification for Arduino Engineer Project Overview: We are seeking an experienced Arduino engineer to lead a comprehensive project involving the development of a custom Arduino-based system. The project encompasses both the hardware (circuit design, component selection, and assembly) and software (Arduino code programming) aspects. The ideal candidate will have a strong background in electrical engineering and extensive experience in Arduino programming. Key Responsibilities: Project Management: Oversee the entire project from conception to completion. This includes defining project scope, milestones, timelines, and deliverables in collaboration with our team. Circuit Design: Design and prototype the electronic circuitry required for the proje...

    €12 / hr (Avg Bid)
    €12 / hr Gns Bud
    49 bud

    I'm looking for an experienced ESP32 programmer who is well-versed with the Arduino IDE, to develop certain functionalities. Here are the key requirements: Ability to read electrical schematics and identify pins for use in coding Management : - Motor -Camera - Wet sensor -Temperature sensor Program with IP address to send data to web REST API Management via IP address, integrated UI (html) in ESP32

    €137 (Avg Bid)
    €137 Gns Bud
    40 bud

    Would like to have a Gary Larson style drawing (black and white only) depicting an Indian teepee village smoking and burning in ruins (a couple of teepees have only smoking poles left) ; bodies of women and children lying on the ground; soldier with gun chasing after fleeing Indian woman with a papoose; two uniformed soldiers in foreground (maybe on horseback) beside a cannon (or Gatling gun) with smoke at end of barrel; arrow stuck in the spokes of the gun carriage. They are on an elevated spot, looking down on the scene of carnage. (they could be looking away from the viewer). One of the soldiers is supporting a staff with a flag subtly depicting the star of David. One soldier is speaking to the other: "We have a right to defend ourselves".

    €176 (Avg Bid)
    Fremhævet Garanteret
    €176
    160 indlæg

    I'm focused on an Arduino project that collects data from various sensors and uses Wi-Fi for communication. I necessitate the involvement of skilled freelancers in programming and radio frequency configuration. (EVIL CROW RF V2) is what the device is that needs to be programmed/ a web server controller through Arduino IDE [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions] Specifically, I require the creation of a program that: - Effectively collects data from choosen sensors - Handles communication via Wi-Fi - Ensure smooth data relay from the sensor to the server Skills and Experience: - Proficiency in Arduino Programming - Understanding of radio frequency and how it interacts with Wi-Fi - Previous experience i...

    €114 (Avg Bid)
    €114 Gns Bud
    19 bud

    I need a proficient Arduino programmer with extensive experience in code development and circuit design. As a key part of this project, you’ll be working on a robotics venture tailored for industrial machines. Below are the specific aspects we look at: - Previous experience in programming Arduino for industrial robotics. We value examples of prior relevant projects. - Proficiency in developing custom codes and creating circuit designs to fit unique project requirements. - Strong understanding of hardware integration, though this is not a primary task for this job. - An innovative problem-solver, capable of suggesting improvements or alternatives when needed. Your task will mainly involve developing unique codes and crafting circuit designs in the context of industr...

    €154 (Avg Bid)
    Haster NDA
    €154 Gns Bud
    9 bud

    I am looking for a skilled Arduino developer who can design and implement a device that: - Can collect data from temperature sensors. - Has the capability to control actuators within an on/off paradigm. - Can engage in communication with other devices. In-depth experience with sensor data collection and actuator control is essential, with a particular focus on temperature sensing capabilities. Familiarity with designing communication protocols between devices is also highly desirable, in order to ensure seamless performance. Ideal applicants should have previous projects showcasing their ability to create Arduino devices that can effectively perform these functionalities. I Need a quote for STEP 1 only at this moment.

    €156 (Avg Bid)
    €156 Gns Bud
    44 bud

    ...for this project includes: - Remote device management: The ability to manage connected devices remotely is crucial for this project. - Data logging: It is important for the system to be capable of accurately logging data from devices. Considering my preferences, the successful developer should have expert knowledge and experience with: - Arduino: Familiarity with Arduino's BLE/LORA is a requirement. You should have prior experience coding in Arduino / C++. - Flutter: I've chosen Flutter as the platform for the software development. Correspondingly, knowledge of Flutter is crucial for this role as user will set up the Gateway through Mobile Phone - AWS: The software will use Amazon Web Services for the remote management of data. As such, experience with AWS ...

    €541 (Avg Bid)
    €541 Gns Bud
    42 bud

    I have a PDF with form fill fields that needs to be recreated. The current document is slop...and form creation is essential. The attached documents are as follows: NOTES: 1. The FNA Blank Template is the document I need recreated as described. These are all the fields I want to recreate in the new cleaned up PDF. 2. The LIFT Fact Finder PDF is a good clean example of how I might want the new PDF to look in appearance. (Note: My corporate colors are: Color 1 = Gold = C4A668, Color 2 = SMOKE = 414042) 3. The attached EPIC FNA PDF is another good example of a client facing form that is used to gather client information. I like the cover page with the picture on this one and would like to create that on my new PDF. It does not have to be that same picture but something that conveys ...

    €37 (Avg Bid)
    €37 Gns Bud
    44 bud

    I am seeking an expert in Arduino programming and hardware with keen troubleshooting skills to correct an issue encountered in our Laundromat service. - Issue: Our coin-based and bill acceptor's firmware does not register incoming payments when coins are put in to fast (this means bill acceptor is not working at all, since it puts in fast). This bug prevents the immediate update of customers' account balance, which is an expected function when coins or bills are inserted. - Task1: change the current read on port 24, 26, 28, 30 and 32 to open collector, so it registrer a pulse no matter the length. -Task2: The system works with a lcd touch screen, and when a machine is selected, the button for the specific machine will disapere for x amount of seconds, but another freel...

    €17 (Avg Bid)
    €17 Gns Bud
    8 bud

    I am looking for a talented web developer to craft an ecommerce website primarily aimed at engaging college students interested in electronics products like arduino, wires, motors etc. The website should have a modern, clean layout appealing young minds, promoting easy navigation with an user-friendly interface. Key Features: • Robust product search and filters to help users easily find what they're looking for. • Add to cart feature for convenient shopping experience. • A forum for user reviews and ratings, allowing shoppers to share their experiences and learn from those of others. • Live chat for direct customer support if possible. Experience with ecommerce website design, a keen eye for contemporary aesthetics, and a deep understanding of user int...

    €134 (Avg Bid)
    €134 Gns Bud
    31 bud

    I am looking for an experienced Arduino programmer who can help design and develop embedded code for an Arduino project based on sensor data collection. As I have skipped on specifying the type of sensors and exact data to be gathered, the freelancer should have broad knowledge across various sensors and be adaptable. Key requirements: - Create code to collect data from various unspecified sensors - Experience with a wide range of sensors is beneficial - Knowledge of Arduino programming and sensor data collection - Problem-solving skills and adaptability - Ability to recommend various sensors based on different use cases Please note, the specific sensors and data to be collected haven't been defined currently, thus I require a professional with wide adaptable s...

    €80 (Avg Bid)
    €80 Gns Bud
    13 bud

    ...your expertise in vibration analysis, including frequency analysis, spectrum analysis, and FFT techniques, to enhance the functionality of the system. Provide PCB design files for final production once the prototype has been approved, ensuring adherence to industry standards. Qualifications: Proficiency in Python programming and microcontroller development, with hands-on experience in STM32 and Arduino platforms. Demonstrated ability to select and integrate sensors tailored to project requirements. Thorough understanding of RS485 communication standards and data transmission methodologies. Experience in designing professional-grade electronic circuits and PCBs using CAD tools such as Eagle or KiCad. Familiarity with 4G communication protocols and their integration into electroni...

    €266 (Avg Bid)
    €266 Gns Bud
    8 bud

    I'm looking for a proficient data analyst who can skillfully read, interpret, and display data in real-time from a temperature and pressure reader for the purpose of data analysis. Your role will be to: - Collect temperature and pressure data from an Arduino and send it to LabVIEW - Perform real-time analysis of this data - Display this data as charts and graphs Ideal requirements: - Experience in data interpretation and real-time analysis - Capability to utilize data visualization tools to present data in a comprehensible chart and graph format - Deftness in identifying temperature and pressure fluctuations - Proficiency in working with data generated from temperature and pressure readers This job calls for accuracy, attention to detail, and live feed data competencies...

    €14 / hr (Avg Bid)
    €14 / hr Gns Bud
    27 bud

    I'm seeking an experienced Arduino coder to help establish ESP32 as a Wi-Fi router using the SIM A7670 4G Module. Key elements of the project include: - Developing Arduino code to utilize the ESP32 and SIM A7670 4G Module for internet connectivity. - Enabling ESP32 to provide a Wi-Fi network for multiple devices to connect. - Implementing WPA/WPA2 security protocols for enhanced network security. Ideal candidates will have experience in working with Arduino, ESP32 and 4G modules, understanding of Wi-Fi network configurations, and implementing network security protocols.

    €1407 (Avg Bid)
    €1407 Gns Bud
    10 bud