Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    11,256 arduino cashless jobs fundet, i prisklassen EUR

    skal bruge færdigt projekt til: wifi data. sende en e-mail når en knap aktiveres der skal tilkobles 2 knapper der skal send forskellige beskeder der skal bruges dns da ip ændre sig skal kunne modtag data til at tænde led skal kunne gemme data hvis forbindelse svigter og sende når der er forbindelse igen

    €84 (Avg Bid)
    €84 Gns Bud
    2 bud

    GETTING TEMPERATURES FROM MULTI POINTS ON MY MOBILE

    €100 (Avg Bid)
    €100 Gns Bud
    12 bud

    Se vor folosi module ARDUINO, in functie de resursele necesare. Module de achizitie de temperatura, ceas de timp real, card SD memorie, imprimanta RS 232.

    €479 (Avg Bid)
    €479 Gns Bud
    3 bud

    Hello. I just need to change an Arduino code. I have already one and it works good but it need to be improved. I will change it because my 2DOF Motion Simulator works right now with pot and I will change it to rotary encoder including opto sensors. And still one small issue. But for someone who knows C++ it should be not that difficult. You also should

    €96 (Avg Bid)
    €96 Gns Bud
    9 bud
    CIRCUITO LED 6 dage left
    VERIFICERET

    ITALIAN-SPEAKING FREELANCERS PREFERABLY, ENGLISH-SPEAKING ARE FINE, TOO SMALL PROJECT (WITH ARDUINO?) I WANT TO BE ABLE TO COMMAND THE LEDS (MAX 18) WITH A PIR AND A SLOW IGNITION (PWM?). THAT'S ALL. COMPLICATION IS IN THE ABSOLUTE NECESSITY TO MINIMIZE CONSUMPTION. THESE CIRCUITS ARE INSERTED IN ARTISTIC OBJECTS (PAINTINGS) THAT ONLY COME ON IN

    €368 (Avg Bid)
    €368 Gns Bud
    6 bud
    Single Encoder Midi Controller 6 dage left
    VERIFICERET

    I need a simple midi controller based on a US Digital S1-512-B rotary encoder. The controller n...higher the number. It needs to be most sensitive in the slow rotation range. Because of the low resistance of the encoder it can turn very fast. This could be done with an arduino but doesn't have to. The encoder needs +5v. I don't need any type of case.

    €217 (Avg Bid)
    €217 Gns Bud
    15 bud
    Building Lora Test Network 5 dage left
    VERIFICERET

    Hi, I have sx1276, arduino uno and dragino lp01 P gateway. I need online help to handle some issues.

    €13 / hr (Avg Bid)
    €13 / hr Gns Bud
    9 bud

    Arduino controller for 3 servo with timming control

    €50 (Avg Bid)
    €50 Gns Bud
    1 bud

    ...air temperature, humidity, atmospheric pressure, CO2 (dioxyde), VOD, visible light intensity (even UV if possible). Sensors must be SMD type and must communicate to the MCU(arduino like/ESP8266/raspberry) via I2C so that an user can chain more than a such PCB on the same MCU pins. Components can be cheap but reliable. Connector on the PCB has to be JST

    €593 (Avg Bid)
    €593 Gns Bud
    14 bud
    ESP32 mp3 player 2 4 dage left
    VERIFICERET

    I want to have an android based app where I can send mp3 files via wifi from my phone to an arduino based gadget with an esp32 module and make the esp32 play it. I don't want to use a separate mp3 card, everything must be done within the esp32. The MP3 files must be in the phone and sent to ESP32. If you already have the solution please bid.

    €120 (Avg Bid)
    €120 Gns Bud
    8 bud

    Hi, I need a analog gps clock with Arduino. Arduino Nano, NEO-6M GPS Module and DMD P10 (Dot Matrix Display). Those are the components. I attached the Display Picture Given Below.

    €108 (Avg Bid)
    €108 Gns Bud
    3 bud

    A small project for Arduino platform including control of stepper motor, Oled display, rotary encoder, I/0 triggers and a simple menu system. Short, a smal system for feeding wire with some precise control. External trigger will start a cycle to feed a wire based on some settings i the local program. 16 different programs to choose between from

    €477 (Avg Bid)
    €477 Gns Bud
    33 bud

    Looking for an electrical and electronics engineer having great experience in arduino coding and proteus simulation and can make a Good report for a project A little part of report is done and need to do remaining part and finish it

    €20 (Avg Bid)
    €20 Gns Bud
    7 bud
    arduino fire alarm 4 dage left
    VERIFICERET

    firm alarm using arduino...so sensitive against fire and smoke

    €28 (Avg Bid)
    €28 Gns Bud
    42 bud

    I want Arduino based mobile calling operated off and on , functional switch mechanism

    €15 (Avg Bid)
    €15 Gns Bud
    7 bud

    At startup move runners, stacker (not shown) and nail guns to a home position using limit switches then enter a pallet size (width and length) onto a screen to move step motors on actuators, moving the two outside runners, stacker and nail guns in or out to the size of the pallet.

    €162 (Avg Bid)
    €162 Gns Bud
    20 bud

    I am looking for an Electrical and Electronics engineer having great experience with ARDUINO and its integration with different sensors. Must have Good experience in final year project report writing tasks.

    €23 (Avg Bid)
    €23 Gns Bud
    21 bud

    saya ada buat water quality project monitoring using iot, tapi menggunakan pycom sebagai micro-controller. dan sensor yang d...ec sensor, dissolve oxygen sensor,temperature sensor water level sensor and turbidity sensor. Saya ada masalah dengan dissolve oxygen sensor sebab available resources dalam arduino tapi saya perlukannya dalam python language.

    €153 (Avg Bid)
    €153 Gns Bud
    4 bud

    Need a Arduino, Electronics, Microcontroller, PCB Layout expert for my current project. If you have knowledge please bid. Details will be shared in message with the selected freelancers. Thanks.

    €142 (Avg Bid)
    €142 Gns Bud
    59 bud

    I need you to develop some software for me. I would like this software to be developed using C or C++.

    €21 (Avg Bid)
    €21 Gns Bud
    22 bud

    ...monitoring. Please refer to the below homepage. The product name is Beagle. [log ind for at se URL] You could choose to utilize either Arduino board or a specially dedicated board to bring out the outcome. You can also use Vinculum or Beagle too to bring out the outcome. Precisely, what we want is the solution

    €105 (Avg Bid)
    €105 Gns Bud
    8 bud
    Arduino, conexion hornos 3 dage left
    VERIFICERET

    Conectar y programar con arduino, disponemos de las placas, explicación y como lo queremos, api etcetc. Asunto: placas y s.o. [log ind for at se URL] [log ind for at se URL] [log ind for at se URL] [log ind for at se URL]

    €547 (Avg Bid)
    €547 Gns Bud
    19 bud
    Ibutton Arduino 3 dage left

    I need to identify Ibuttons with Arduino and read/write symple data to them.

    €147 (Avg Bid)
    €147 Gns Bud
    29 bud

    I need a tally counter for creating donor sites during hair transplantation surgeries. I need the schematics and code, since I don't have the time to work on them, but I can build the device myself. Basic functionality: The patient has an electrode (ECG electrode) on his hand. The other end of the wire is connected to a needle used to create donor sites on the patient's head. When the n...

    €491 (Avg Bid)
    €491 Gns Bud
    18 bud

    The project contain the following materials: 1. Arduino nano 2. L298 module 3. 1 Potentiometer for adjusting speed of motors (it adjust speed for booth 2 motors in same time) 4. 2 motors (12v) connected to l298 module What i need to do this project: 1. arduino need to be connected to L298 module 2. L298 module need to be connected to 2 motors of

    €26 (Avg Bid)
    €26 Gns Bud
    20 bud

    I need help sending data from my Arduino that is connected via serial Tx & Rx ports to sim7000e GSM module.

    €26 (Avg Bid)
    €26 Gns Bud
    8 bud
    Modify two PCB's 3 dage left

    The project requires two PCB's to be modified 1) Arduino NANO board 2) Arduino Pro Mini board The PCB layouts, schematics and bill of materials for these boards are readily available through the web. The modification consists of changing the layout of the board, adding some components and removing other components. Please see the uploaded file for

    €173 (Avg Bid)
    €173 Gns Bud
    36 bud
    Neurosky mindwave project 2 dage left
    VERIFICERET

    need someone to code a game using a neurosky mindwave mobile , arduino/ raspberry pi to control the air speed of an air blower

    €90 (Avg Bid)
    €90 Gns Bud
    5 bud
    Arduino rfid rs485 2 dage left
    VERIFICERET

    Necesito que desarrollen un software para mí. consta en que lea el uid y se transfiera por método get . Me gustaría que este software sea desarrollado.

    €29 (Avg Bid)
    €29 Gns Bud
    8 bud

    I require the circuitry and component schematic, as well as the Arduino Code for this project. Was potentially looking at this project running of an Adruino UNO, but open fpr best possible Adruino unit based on requirements. Gas Boiler System Monitoring Unit I need to build needs to monitor various sensors at various gas boiler systems in various

    €366 (Avg Bid)
    €366 Gns Bud
    27 bud

    automatic seed sowing machine that can sowing seed in required distance and depth. but im doing research. so i need only circuit diagram and arduino coding.

    €37 (Avg Bid)
    €37 Gns Bud
    10 bud

    Hi, I need a person or a team who can help me transform an idea to a physical device. In short i need help with: 1. Create a custom arduino board to suite my need. The board needs a display and some buttons. 2. Create firmware to do the things i want. Show something on the display and manipulate PWM signals. The firmware do also need to log everything

    €595 (Avg Bid)
    €595 Gns Bud
    35 bud

    Hi, I am looking for someone who can finish a project that I bought a couple of years ago, it is based on Arduino and I need help with creating a GUI using Processing (the coding language) based on how I want it to look. Have you done anything similar before?

    €45 / hr (Avg Bid)
    €45 / hr Gns Bud
    1 bud

    I want Master and Slave communication VIA SPI protocol in which we send data from master and receving data from either side.... Only Proteous Simulation and Code Needed :) Thanks

    €44 (Avg Bid)
    €44 Gns Bud
    17 bud

    ...native technology using Java Language, that we have already developed and now it's time to add new features and move to a higher level. The app is connected via bluetooth to an Arduino board which measures the car weight once the weight reaches a certain value this is considered and accident. The app will start sending SMS's to the pre-saved contacts. This

    €155 (Avg Bid)
    €155 Gns Bud
    18 bud

    I need somoene to design a pcb that will take power from a 12v 5amp DC adapter and will have 2pc 18650 lithium batter...power will be be constant and linear 5v 2amp and 4v 2amp. I will have separate overcahrge and discharge protection circuiut for the batteries. These are meant to power up arduino with a number of microchips and gsp modules with gprs.

    €101 (Avg Bid)
    €101 Gns Bud
    21 bud

    HO BISOGNO DI UN PROGRAMMATORE ARDUINO/RASPBERRY O SISTEMA SIMILE CHE POSSA TRAMITE UN UNO SPECIFICO COMANDO EROGARE UNA PRESTABILITA QUANTITA DI LIQUIDO. IL TUTTO CORREDATO DA UN PANNELLO TOUCH SCREEN.

    €230 (Avg Bid)
    €230 Gns Bud
    10 bud

    I need an iPhone ap...an iPhone app. I would like it designed and built. App required for pushing images to epaper display which is controlled by ESP8266. 2 tasks - Programming of ESP8266 (Arduino code) and creating an app. The epaper display will be connected to ESP8266 driver board and the app should get connected to ESP8266 using wifi.

    €355 (Avg Bid)
    €355 Gns Bud
    3 bud

    I need an dual(stereo) LED level indicator of 100 LED/channel controlled by Arduino maybe Nano or something small like it. Something similar to this video [log ind for at se URL] The LED's I will use are not like in the video, so you have to design the drivers also. Instead I want to use the classic 10 LED bar. I have to be able

    €187 (Avg Bid)
    €187 Gns Bud
    9 bud

    I have nrfl24l01 modules that let me have a sensor wireless, base connected to the pc. i want to have multiple sensor that make this thing [log ind for at se URL] and that are controlled by the led.

    €25 (Avg Bid)
    €25 Gns Bud
    9 bud

    I have a moving image of opening window and its reverse. I would like to open/close the window when a person is detected from the closed/open window, and want this to be looped. When nobody turns up, the moving image should be still as it is open/close. If a motion is detected when the window is opening and closing, I prefer the input to be ignored.

    €153 (Avg Bid)
    €153 Gns Bud
    40 bud

    Requirements: The programmer must be fluent with ROS integrated with SLAM for RPLidar A1M8. Clear understanding using Raspberry Pi and Arduino. Task 1: Price $100 - $120 The Robot has to map the whole room. Task 2: Price - More than Task 1! If Task 1 is completed successfully, Task 2 will be discussed.

    €135 (Avg Bid)
    €135 Gns Bud
    12 bud
    Arduino coder Udløbet left

    arduino or raspberry pi coding with ultrasonic sensor to greet people good morning or wish them goodbye, depending on the direction they are walking in

    €78 (Avg Bid)
    €78 Gns Bud
    40 bud

    Hi Gui X, My name is Per C. from Sweden. I contact you because I am in need of some professional help regarding making a GUI for a arduino project. The project is about controlling LEDs and we want to make an easy to use GUI for the end user to set different things with ease. We have done some work already for the GUI just to test it out and it is

    €45 / hr (Avg Bid)
    €45 / hr Gns Bud
    1 bud

    I'm planning to start working on project, where I want to setup Lora Gateway and ini...data (later we will be using 200+ nodes) we will write firmware for nodes, we will pay you extra if we need your help for any firmware. (Please note that we will not accept Arduino code, we work with Microchip XC) I will share with you what hardware I'm looking at.

    €489 (Avg Bid)
    €489 Gns Bud
    15 bud

    ...but I couldn’t not programmed it using Arduino software, following an article “howtomechatronics” but at the end the code and it’s control software do nothing, my robot is fully assembled with servo motors, Mega boards & electronics are working great in tests. I need a simple fixed code to upload it in Arduino Board to pick up parts and place it in

    €10 / hr (Avg Bid)
    €10 / hr Gns Bud
    14 bud

    ...signing the byte array with the right curve. ** HERES A FULL WORKING EXAMPLE IN C# OF THE EXACT FUNCTIONALITY REQUIRED: [log ind for at se URL] You will need an Arduino to do this, and I will work with you on it and offer what I can to help. Previous CryptoCurrency experience preferred. Further Info: Waves Platform themselves have written

    €220 (Avg Bid)
    €220 Gns Bud
    15 bud

    Traducción de un programa de Arduino a PIC mikroC

    €186 (Avg Bid)
    €186 Gns Bud
    11 bud

    I want somebody design a control circuit to to control a 3-phase contactor to trip when short circuit happen...somebody design a control circuit to to control a 3-phase contactor to trip when short circuit happens as protection. the following must be submitted: 1- the code file (arduino IDE) 2-the PCB file 3- the bill of material and their numbers

    €49 (Avg Bid)
    €49 Gns Bud
    12 bud

    Für ein Sportprojekt soll ein mobiler GPS Datenlooger 10Hz aus frei verfügbaren Standardbauteilen wie zB. Arduino Nano, neo-7, 3-Achsen Gyro+Beschleunigungssensor, USB-Laderegler, Batterie für rd. 4h und SD-Speicher erstellt werden. Das Gerät soll die Positionsdaten inkl. der Beschleunigungs- und Lagewerte als CSV-Daten auf der SD-Karte speichern.

    €1809 (Avg Bid)
    €1809 Gns Bud
    11 bud