Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Evner
Sprog
    Job-status
    395 PIR jobs fundet, i prisklassen EUR

    I need a project done in Python. It is a security system project. Raspberry pi 3 will be used along with Hc-sr501 PIR motion sensor. There will also be a keypad, buzzer and a led. The motion sensor should detect when someone enters the room and the led should reflect different areas of the building that are triggered. The keypad should be used to arm and disarm the alarms. The buzzer should be use...

    €46 (Avg Bid)
    €46 Gns Bud
    17 bud

    Hola Mauricio, I have a few jobs that I would love you to help me with. If they are successful we can continue working together. I am building smart home product using a bluetooth mesh connection. First I would like to create a simple PIR sensor. After that I want to make a simple switch. These are going to be battery powered. I actually have a working schematic already for the switch a...

    €17 / hr (Avg Bid)
    €17 / hr Gns Bud
    1 bud

    Devward is looking for an embedded software developer with experience in ESP32 and STM32. We are currently developing a custom industrial air quality monitor for one of our clients. We just released the first prototype and will start working on the second one soon. The product consists of one main processor (ESP32) and two small co-processors (STM32). Here come the main software tasks the develop...

    €1949 (Avg Bid)
    €1949 Gns Bud
    23 bud

    Create a working proto-type that multiplexes (provides power and the necessary amperage) ultrasonic waves to 6 transceivers (TR) to a central microprocessor/power/amp unit. The TR has been tested successfully as a reciever and transmitter, data from spec sheet Here is what I would like to do: 1. Use a single op amp, shifter (if we need it to get maximum distance of 15 m), MCU and take readings ...

    €154 (Avg Bid)
    €154 Gns Bud
    5 bud

    Vær venlig at Tilmelde dig eller Log ind for at se detaljer.

    Forseglet NDA

    Site Live Security  Solar Powered Surveillance Camera Pole.  The Steel Pole is 4 Metre Galvanised Steel Pole 65×65×3mm. I need to came up With an idea how to mount the solar panel and battery separate to the Pole to the top. Link to video same idea. But to come up with a different idea not to copy exactly like they have. Starting from the top of the poll going down...

    €169 (Avg Bid)
    €169 Gns Bud
    1 bud

    I'm trying to create an "alarm system" with a PIR sensor (HW-316-B), a buzzer and a RPi 3B V1.2 as the controller. This is a personal project and an experienced programmer should find this relatively simple. Since this is a personal project I'm looking for someone to provide the .ASM script (with detailed comments) that achieves this.

    €26 (Avg Bid)
    €26 Gns Bud
    11 bud

    I'm trying to create an "alarm system" with a PIR sensor (HW-316-B), a buzzer and a RPi 3B V1.2 as the controller. This is a personal project and an experienced programmer should find this relatively simple. Since this is a personal project I'm looking for someone to provide the .ASM script (with detailed comments) that achieves this. If you're considering bidding for th...

    €147 (Avg Bid)
    €147 Gns Bud
    1 bud
    Jay Ladha Pir -- 2 Udløbet left

    I need an Android app. I would like it designed and built.

    €88 (Avg Bid)
    €88 Gns Bud
    3 bud
    Jay Ladha Pir Udløbet left

    I need you to write some content for a website.

    €61 (Avg Bid)
    €61 Gns Bud
    1 bud
    cryptographer Udløbet left

    All kind of Math at undergrad level. Public key Cryptography, Zero knowledge proof (ZKP), Verifiable Computation, Attribute Encryption, Charm Crypto implementation and analysis, Homomorphic encryption (SEAL library), Designing protocols and implementation in python, PIR, theoretical security analysis.

    €843 - €1686
    €843 - €1686
    0 bud

    PLEASE READ THIS PROJECT CAREFULLY AND COMPLETELY AND RESPOND AS REQUESTED AND DETAILED BELOW: We are developing a new product 'Elderly Security System' which is designed to protect an older person living alone at home. The device will help in many situations including panic/fall, pest phone caller, low/high temperature, lack of movement, unwanted caller at door etc. The new product ha...

    €66 (Avg Bid)
    €66 Gns Bud
    68 bud

    I have a generic Pemenol Voice Playback module. I have an Arduino Nano. I have a generic PIR sensor. I need help writing the code for QTY 3 AA battery power. When PIR sensor threshold is triggered then first pin on playback module should activate just one time. Then Arduino should sleep to conserve power. After 30s Arduino should wake up and check if motion is triggered for 5s, if yes then ...

    €27 (Avg Bid)
    €27 Gns Bud
    2 bud
    Trophy icon Design three (3) different roll ups Udløbet left

    This competition is about designing three different roll ups. For this competition you will have to do some google searches so that you understand the product we are a selling and for you to create some unique selling points about each product. The size of each roll up is the same, 80cm width and 200cm height. These roll ups are to placed outside our shop in a big mall to attract customers t...

    €257 (Avg Bid)
    Garanteret
    €257
    77 indlæg

    Hi I have some basic information that I will be putting together, are you able to place them into a graph for analyzing? I will possibly need a pir chart , line chart , a table , and maybe a dot chart. I would need these today as im compiling the basic information. Kindly let me know if your available. These will be some random expense numbers. Rough estimates, not exact. Easy work.

    €16 (Avg Bid)
    €16 Gns Bud
    16 bud

    Looking for an engineer that has experience design and coding PCBs related to a change in light or change in motion. Please do not reply unless you have this experience in your past Must know: PIR sensor types (3 or 4 pin) Code logic for digital filtering Other factors such as response time, measuring distance, fresnel lens pairing

    €181 (Avg Bid)
    €181 Gns Bud
    10 bud

    Be sure you understand all details. You must have ESP32 devices for testing ! At least 2 devices ESP32 !!!! NO HARDWARE DESIGN REQUIRED ! We have 3 tasks: Task 1 - - - - - - - - - - Creating a full Bluetooth network for ESP32. (Bluetooth 5.0. ...distance range is required for more than 100 meters). We will test it outdoor. Network must have at least "Coordinator" and "End node&...

    €99 (Avg Bid)
    €99 Gns Bud
    8 bud

    Be sure you understand all details. If you want to ask something, read again the description of the project and be sure is not indicated here. Task 1 - - - - - - - - - - Creating a full Bluetooth network for ESP32. (Bluetooth 5.0. ...distance range is required for more than 100 meters). We will test outdoor. Network must have at least "Coordinator" and "End node" roles. Repe...

    €339 (Avg Bid)
    €339 Gns Bud
    6 bud
    Micro PIR Sensor Udløbet left

    I would like to develop a micro PIR sensor that runs with very low battery. These devices are now becoming readily available in China with long ranges (500 ft) and are very inexpensive ($3). The boards are based on 433 and other frequencies. I would like to make a very small version that is inexpensive, with a narrow angle and long distance for targeted security outdoors. Looking for some tha...

    €97 (Avg Bid)
    €97 Gns Bud
    8 bud

    Hello guys, We need a 3D model for: 1. Smart Home Plug-in (Z-Wave) 2. Multi-Sensor (PIR, Contact, Temperature, Light) I Will attach some examples we like.. You will need to google and come with the best possible solution. At the very beginning, we will need those 2 devices only, the winner will be re-hired to do the rest of our smart home product palette. What is very important is, that the pow...

    €83 (Avg Bid)
    Garanteret
    €83
    52 indlæg

    need 24 hr running low power consuming solar powered music player and ip ir camera pir motion dectection live streaming for agriculture purpose

    €46 (Avg Bid)
    €46 Gns Bud
    4 bud

    Necesito que desarrollen un software para mí. Me gustaría que este software sea desarrollado.

    €777 (Avg Bid)
    €777 Gns Bud
    7 bud

    We have generated a prototype for an home security system using the below boards, 1. ESP32 2. SIM800L 3. PIR sensor and trying to convert this into a simple production hardware. Here is the requirement, 1. Need recommendation on alternatives for ESP32 boards for production use (considering ESP32 is a hobbyist board and not recommended to use in production) 2. A simple hardware design with ESP32...

    €8 / hr (Avg Bid)
    €8 / hr Gns Bud
    17 bud

    I require a program written for a Duty Standby fan setup. The requirements are as follows - The ventilation system shall be activated by PLC Input (PIR Sensor). Fans will duty cycle on a weekly basis. The standby fan shall be automatically energized when the duty fan is in fault mode or there is a mismatch between run status. I/O Schedule & schematic provided.

    €94 (Avg Bid)
    €94 Gns Bud
    19 bud

    I need to be able to switch lights on and off. I have ultrasonic and PIR sensors that when triggered needs to switch the lights off, and after a programmable amount of time switch on again. Also, the lights must be switched off again after a few minutes and only switched on again after the sensors have been triggered we work with an Arduino nano

    €75 (Avg Bid)
    €75 Gns Bud
    28 bud

    We are looking for an embedded system designer with good skills in PCB layout to develop a full-spectrum 20W to 30W E27 LED light bulb for plant growing. This bulb needs a CCD or CMOS image sensor with wide-angle lens at the centre and circuitry inside the bulb to allow it to detect motion (PIR) and start/stop capturing videos, which are then either saved on a MicroSD card or streamed with G.265 (...

    €419 (Avg Bid)
    €419 Gns Bud
    15 bud

    Vær venlig at Tilmelde dig eller Log ind for at se detaljer.

    Forseglet NDA

    Vær venlig at Tilmelde dig eller Log ind for at se detaljer.

    Forseglet NDA

    Hello freelancers! I have a project. Analytical details in chat. Freelancer Profile: The ideal freelancer is familiar with internet programming technologies and the experience and skills to design and implement online applications based on 3-tier architecture using modern technologies and appropriate markup and programming languages. In terms of implementation, from the client's point of...

    €372 (Avg Bid)
    €372 Gns Bud
    11 bud

    Hello freelancers! I have a project. Analytical details in chat. Freelancer Profile: The ideal freelancer is familiar with internet programming technologies and the experience and skills to design and implement online applications based on 3-tier architecture using modern technologies and appropriate markup and programming languages. In terms of implementation, from the client's point of...

    €129 (Avg Bid)
    €129 Gns Bud
    7 bud

    I need to design a system to monitor desk occupancy in a university library. The system should use PIR sensors to detect presence at the desk and show occupancy data in a dashboard for the library. Also, the system should be connected to an app to show studente the map of the available desks. I would also like to have the project designed with a cheaper alternative, i.e. QR codes on the desks that...

    €131 (Avg Bid)
    €131 Gns Bud
    7 bud

    I’m looking for a service, someone to design for me a PCB in Gerber that can be manufactured by JLCPCB, to fit ESP32 with the following sensors (PIR motion sensor + smoke detector + red led + piezo buzzer + DHT22 temperature sensor) + visually pleasing plastic casing , like the one in photo, (with only PIR + smoke detector) taken from one of videos shared in this channel. I need about 100 of...

    €40 (Avg Bid)
    €40 Gns Bud
    10 bud

    We are looking for a developer to develop Hardware and Software of a presence detection sensor. We plan to use the PIR sensor D203S Sensor [Better suggestions will be taken into consideration]. The sensor should use STM8S003 MCU, TRIAC based circuit for switching power supply unit etc. We Should be able to set the following parameters of the product. Timing delay for which TRIAC is activated [10 ...

    €97 (Avg Bid)
    €97 Gns Bud
    18 bud

    Когда-то давно производили миниатюрный датчик движения на базе видеокамеры (VMD -Video Motion Detector), потом по определенным техническим причинам выпуск прекратили, а сейчас в условиях дефицита комплектации из-за COVID19 и потенциального роста спроса на системы охраны в кризисное время решили доделать. Если в 2х словах минус датчика движения на базе видеокамеры в том, что что он не видит в темно...

    €829 (Avg Bid)
    €829 Gns Bud
    2 bud

    [log ind for at se URL] Let me know if you are interested. Can be printed in any material you have present (dull neutral colours only). Deliver 1 completed object to South East, England.

    €12 (Avg Bid)
    €12 Gns Bud
    3 bud

    Looking for some ESP32 software/firmware guru who can -review codes -fix codes -improve codes for better functioning. We don't need circuit designing but someone very experienced in esp32 programming and dealing with devices like -sim800l -mq135/7 -pir -microwave doppler -dht22

    €31 (Avg Bid)
    €31 Gns Bud
    11 bud

    We are looking for someone who can design a SMD pcb with Esp32 Sim800l rtc Relay Pir sensor Microwave radar You can use PIR Module and microwave Radar module, the rest needs to be single pcb. You don't need to design Power supply or code program. We will use PCBA in China, so just design files with BOM are needed. If you can do it in competitive price we have many. Similar projects

    €32 (Avg Bid)
    €32 Gns Bud
    42 bud

    Hello, I want you to create for me schematic for a PIR motion sensor which will have output pin High/Low (motion/no motion detected). Avoid using BISS0001 controller or any other cheap chinese controller. LOW power is a must! Lower than BISS0001 if possible PIR motion sensor can be anything (500bp motion sensor for example) BUT it would be prefered to use a GOOD quality one. If you use a sche...

    €22 (Avg Bid)
    €22 Gns Bud
    14 bud

    Hello, I need a simple technical design proposal for a device where a a PIR sensor detects a motion and lets an LED for 30 seconds. The device needs to be battery powered and the battery needs to last for at least 4000 of such flash cycles. The battery should be rechargeable. The maximum dimensions should not exceed approximately 10cm x 3cm x 1cm. The price of the device should not exceed 7 USD...

    €18 (Avg Bid)
    €18 Gns Bud
    2 bud

    Firmware, Software for smart IP camera,PIR motion sensor, Network video recorder, Home security hub wifi, Personal cloud storage

    €704 (Avg Bid)
    €704 Gns Bud
    8 bud

    We 2 separate bin... 2 arduino mega... 1 bin will detect only a plastic bottles and get reward Such as Rm0.10 (Coin) and then 2bin will detect only CAN / Tin and get reward such as Rm0.10 (Coin) and we just display LCD and PIR sensor... Inductive proximity sensor and Capacity proximity sensor... Feel free to Whatsap me (Removed by Freelancer.com Admin) We use Software Arduino IDE My budget is...

    €97 (Avg Bid)
    €97 Gns Bud
    11 bud
    Gsm intruder system Udløbet left

    We are looking for someone who can build and design pcb, write code for a gsm intruder. It will have microwave radar and pir sensor, on movement detection it will send calls, sms and turn on relay. It will receive phone number, active time from cloud. We are looking for devs for other projects, so if you are a right fit we can work on a lot of projects.

    €217 (Avg Bid)
    €217 Gns Bud
    16 bud

    Arduino based / ESP32 beehive monitoring. Wifi conected It has to monitor weight, temperature-humidity in/out, 2x sensors for alarm, 1x PIR sensor On alarm and PIR it has to notify user via email. Monitoring voltage of battery. It has to be web based aplication. Weight scale is HX711. Temeprature and humidity is dht 11. Small project...

    €191 (Avg Bid)
    €191 Gns Bud
    11 bud
    Create a Design Udløbet left

    I need to design a logo for my project and below is the objective for my senior project The main objective of this project is to develop a smart remote-controlled home automation system that is a low cost and user friendly. Our proposed android application is called ‘Run Remotely’ which is developed to achieve the project goal. Due to technology innovation houses are getting smarter....

    €29 (Avg Bid)
    €29 Gns Bud
    30 bud

    Thank you for your interest in my project. Esp based multisensor pcb design I'm looking to build a product, from electronics design and manufacturing. I'm looking for engineer who can lead this project and help me though the process. Requirements - Esp8266 - Micro usb power and programming - Cp2102 usb serial - Bme280 temperature humidity - i2c - Am312 motion - Bh1750 luminance - i2c -...

    €415 (Avg Bid)
    €415 Gns Bud
    25 bud

    Hi, I am after an Arduino code that will do the following: Inputs: 1. Reed Switch 2. PIR 1 3. PIR 2 4. PIR 3 5. PIR 4 Outputs: 1. Relay 1 2. Relay 2 Program: Sequence 1: When Reed switch is tripped, followed by PIR 1, then PIR 2, then PIR 3. Trip relay 1 for 5 seconds Sequence 2: When PIR 4 is tripped, Trip relay 2 for 5 seconds and reset.

    €37 (Avg Bid)
    €37 Gns Bud
    5 bud

    Simple circuit required. I just need the diagram and i'll build it. I have a PIR security light outside which has a wireless beeper that plugs into the mains inside, when motion is detected the light comes on and the beeper inside beeps for 8 seconds (Its not a continious beep, its on and off for 8 seconds then stops) Now i want to attach a circuit to the beeper so when the beeper is tri...

    €135 (Avg Bid)
    €135 Gns Bud
    26 bud

    1. Sort out power issues: our device (with 2 nRF MCU and sensors) will be power from the LED driver (SR, DEXAL, or other DALI part 150/250 / ANSI C137.4-2019 compatible LED Drivers). The connection is only 2 wires providing both power (~15v) and the data/signal to the LED Driver. Prototype the power converter on a breadboard to measure power parameters (volt and mA availability). 2. Develop the s...

    €17 / hr (Avg Bid)
    NDA
    €17 / hr Gns Bud
    15 bud

    I need a small but loud programmable PIR motion sensor that will ignore pets. I prefer the device to be easily mass produced cheaply but of good quality to be placed inside a ceramic object power source can be electric but prefer battery. I am building a prototype that could result in a permanent job for the designer.

    €18 (Avg Bid)
    €18 Gns Bud
    2 bud