Design Joint System for tubular steel structure

  • Status: Closed
  • Præmie: $1500
  • Modtagne indlæg: 1
  • Vinder: ParalelogramoDI

Konkurrencebeskrivelse

Target
To develop a joint system for the tubular steel structure of an already designed family of modular, reconfigurable and multi-functional furniture (see attached presentation).
We require either one joining element or a set of joining elements that will allow the tubular steel parts of each of our furniture types to be easily unassembled and reassembled in different configurations (see attached presentation).

Requirements
1. The final design of a joining element or family of joining elements for the before mentioned furniture types.
2. The joining element should allow the furniture tubular steel structure to be quickly and easily unassembled and reassembled without the use of any highly specialized tools or highly qualified personnel. The furniture types are intended for retail use and will be located on the sales floor of a department store. The unassembly and reassembly of the furniture will be performed by a salesperson with limited knowledge of conventional tools.
3. The joining element should consider that the furniture structure is made of tubular (hollowed) steel elements with a square section of 2 inches.
4. The joining element must allow for 100% stable furniture. The joining element must secure the furniture tubular steel elements firmly and securely.
5. While in its place, the joining element must allow no movement in any direction of the adjacent tubular steel elements.
6. The joining element must adapt to Mexican commercial tubular steel sections, dimensions and calibres (thicknesses).
7. The caliber (thickness) of the tubular steel square sections will be defined after the joint system solution.

Deliverables
1. Line drawings in .dwg format and rendered 3D views in .pdf format of the proposed joining element (or elements). The drawings and rendered 3D views must clearly explain how the joint element performs according to each and every one of the before mentioned Requirements.
2. The winner will be required to produce a physical prototype of the joint element made in the proposed material and 1:1 scale. The physical prototype must be delivered in Mexico City.

Restrictions
1. The proposed joining element should not be welded to the furniture tubular steel structure.

Anbefalede færdigheder

Bedste indlæg fra denne konkurrence

Se flere indlæg

Offentlig præciseringstavle

  • kxrist
    kxrist
    • 4 år siden

    i think that contest holder took our job for free...

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Sorry but is not for free.
      As you can see the contest is guaranteed.
      I'm steel wating for your proposal.
      If you are steel interested you have 5 days left to send it.
      Thank you.

      • 3 år siden
    2. kxrist
      kxrist
      • 3 år siden

      I'm sorry for this comment..

      • 3 år siden
  • carfer
    carfer
    • 4 år siden

    I verified my design in 3D, and can deliver 3D deisgn file, .dwg and pdf picture file to you.

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      I sent you my comments in your presentation.
      Thank you.

      • 3 år siden
    2. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      I sent you my comments in your presentation.
      Thank you.

      • 3 år siden
  • kxrist
    kxrist
    • 4 år siden

    quarantee the prize plz!

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      You are welcome.

      • 3 år siden
    2. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      I'm sending you my comments inside your presentation.
      I will wait for you answer.
      Thank You.

      • 3 år siden
  • FantasyCAD06
    FantasyCAD06
    • 4 år siden

    Good Work done with Perfection and understanding and we understand your requirement,,,

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 4 år siden

      We are looking forward to your proposal.
      Thanks.

      • 4 år siden
    2. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Are you going to send me you proposal?
      You have 4 days left.
      Thank you

      • 3 år siden
  • Nijiworks
    Nijiworks
    • 4 år siden

    please check my design

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Thanks, but we believe that the small piece you propose will hinder the constant use of the furniture.
      Thank you.

      • 3 år siden
  • nihalmuhd
    nihalmuhd
    • 4 år siden

    Please guarantee the prize money....

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Hi,
      The constest is already guaranteed and it has been extended for 5 more days.
      If you are still interested you can upload your proposal.
      Thank you.

      • 3 år siden
  • nihalmuhd
    nihalmuhd
    • 4 år siden

    I mean make the contest guaranteed....

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Hi,
      The constest is already guaranteed and it has been extended for 5 more days.
      If you are still interested you can upload your proposal.
      Thank you.

      • 3 år siden
  • SiroosJafary
    SiroosJafary
    • 4 år siden

    Good day. my proposal is just rough design. i need to improve it. It is really flexible and easy to assemble. we are using this type of joints currently and they work stunning. please message me for any further information. I can provide you real photos of them and explain to you how they works. and can send already manufactured sample to you. Looking forward to hear from you. Regards.

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Thank you for sending me your proposal.
      I sent you my comments days ago.

      • 3 år siden
  • SiroosJafary
    SiroosJafary
    • 4 år siden

    Please guarantee the contest. Then I will send images.

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      The contest is already guaranteed.

      • 3 år siden
  • manuelrosso
    manuelrosso
    • 4 år siden

    I see that my entry is the only one that shows something. Did I made a mistake in my presentation?

    • 4 år siden
    1. manuelrosso
      manuelrosso
      • 4 år siden

      Dear Sir,
      I am not sure if you got my answer to your request, so it goes again in short version.
      The evaluation of the robustness of the structure is unavoidable. But it is not sensible to calculate this kind of structure in a theoretical way; it is always done by testing a prototype. Luckily, in my design is easy to do a prototype, since it does not require molds. I do suggest to go for the nearest metal sheet folder workshop (plegador in my country), to hire the manufacture of some parts, build up some structures and hit them to see if they support it. If they are strong enough, stop. Otherwise, increase the width of the metal sheet.
      I may do the prototypes for you, provided that you decide to use my solution and to pay the price, but it is kind of catch 22 situation. More reasonable is to do prototypes in your place, test until you feel satisfied and at the same time decide details like the materials and finishing. I may provide the required drawings for the parts.

      • 4 år siden
    2. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Hi,
      Thank you for your attention.
      Honestly i do not see your proposal working, since it requires making many small parts, which can cause the manufacture and assembly of the furniture very difficult.
      If you're still interested, try to design a proposal that does not have many pieces in order to have more stability.
      Thank you.

      • 3 år siden
  • SiroosJafary
    SiroosJafary
    • 4 år siden

    Hi there, please contact me as i can not upload any filed any more here. I have some images for you. thanks.

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Hi,
      That probably happened because the contest had already been closed. The contest has been extended by five days from today.
      If you are still interested you can try to upload more .jpeg files.
      Thank you.

      • 3 år siden
  • manuelrosso
    manuelrosso
    • 3 år siden

    Dear Sir,
    I understand that you decided to re-start the contest. The one I sent to you is the best, with the information available. If you prefer to have another, please, indicate the changes that you prefer to have.

    • 3 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Hi,
      Thank you for your attention.
      Honestly i do not see your proposal working, since it requires making many small parts, which can cause the manufacture and assembly of the furniture very difficult.
      If you're still interested, try to design a proposal that does not have many pieces in order to have more stability.
      Thank you.

      • 3 år siden
  • saketmishra01
    saketmishra01
    • 3 år siden

    i am working your design will be submitted soon

    • 3 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Please send me your design as soon as posible. You have 5 days left to send it.
      Thank you.

      • 3 år siden
  • sultancontest
    sultancontest
    • 3 år siden

    Freelancers have good news!!!!! www.SultanContest.com is a New Graphics Designing Contest Freelancing website, you can join free and get join all the contest and also you can post contest. If you are a good graphics designer, you can earn thousand of money... That is a great opportunity for freelancer and buyer..

    • 3 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 3 år siden

      Thank you for your info.
      Do you have any proposal for my constest?

      • 3 år siden
  • kxrist
    kxrist
    • 4 år siden

    may i ask why my entry is rejected?

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 4 år siden

      We asked you more details, we have to be sure about the stability.
      Thank you.

      • 4 år siden
  • Desarrollos62
    Desarrollos62
    • 4 år siden

    Buenos días.
    Por favor vea mi propuesta. Tengo mas información de la misma que no pude incluir en Freelancer.com
    Muchas gracias por su atención.
    Espero su pronta respuesta.

    Cordialmente.
    RV

    Good morning.
    Please, view my proposal. I have more information about it, but I coudn't include it in Freelancer.com
    Thank you very much for your attention.
    I expect your soon reply.

    Regards.
    RV

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 4 år siden

      Hola,
      Revisamos tu propuesta pero desgraciadamente creemos que no cuenta con la estabilidad suficiente.
      El uso continuo de las piezas puede desgastar rápidamente la rigidez de las piezas causando el desequilibrio de las piezas.
      Muchas gracias de cualquier forma.
      Saludos.

      • 4 år siden
  • mNorbert
    mNorbert
    • 4 år siden

    ​​​​​Hello,

    I’m a student, web designer and developer currently based in Szczecin, Poland (Europe). ​​I'm freelancer specializing in webdesign and branding. I'm interested in cooperation with you. I can offer designing website and slicing project to html and css.

    I’ve started doing professional works in webdesign in 2007. As the time has passed, experience allowed me to craft my skills. I’ve been constantly trying to improve every day. I’m technically proficient, easy to work with and I love my job. So what are you waiting for?

    Thanks for considering me for your project and I am excited being associated with you. My projects are featured on behance.net and webdesignserved.com

    PORTFOLIO:
    www.behance.net/norbert
    www.mierzwa.org​

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 4 år siden

      Sorry but we are not looking for a web designer.
      Thank you anyway.

      • 4 år siden
  • jonnypjohnston
    jonnypjohnston
    • 4 år siden

    I am a Mechanical Engineer/Digital Sculptor. Current licenses for SolidWorks Premium 2013, CATIA v5r21 & Inventor Professional 2014. If you have a project, call or email me for details.

    • Multi-functional team member with nearly 25 years of diverse experience in automotive, aerospace, & consumer products possessing a seasoned expertise in design, detailing, & drafting, having a limited background in the operation of CNC’s, manual mills & lathes.

    • Hands on problem solver with simple creative solutions; able to juggle multiple projects from concept to customer; technical & mechanical aptitude allows learning new software & hardware with exceptional ease.

    • Described by customers and coworkers as aggressive & passionate; dedicated & flexible; results-oriented & self-motivated; well organized with excellent communication skills.

    https://grabcad.com/jonny.p.johnston
    http://www.linkedin.com/in/jpparametrics
    https://www.facebook.com/JPParametics

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 4 år siden

      Please send your proposal.
      Thanks.

      • 4 år siden
  • psapiens
    psapiens
    • 4 år siden

    Contact me.... I have some good ideas about your project.

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 4 år siden

      We are looking forward to receiving your proposal.
      Thanks.

      • 4 år siden
  • nikhiltechnology
    nikhiltechnology
    • 4 år siden

    Cannot delivered the physical prototype in Mexico City. Let me know about it, I can design the Structure and show hot elevate the design

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 4 år siden

      We only expect the winning proposal to be sent to Mexico City, so in case you win you will be able to pay the shipping to Mexico City.
      You can send us your design proposal.
      Thanks.

      • 4 år siden
  • rizos2710
    rizos2710
    • 4 år siden

    I can design this as a 3d model and provide you both with .stp and .dwg files. I've already designed a joint for a small wind turbine so i can understand what you need.
    Need more info about the geometry to start, please send a message.
    Thank you.

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 4 år siden

      Have you downloaded the .ppt attached to the scope definition?
      Please be more specific about your question.

      • 4 år siden
  • Nijiworks
    Nijiworks
    • 4 år siden

    2 inches square at the end of each tubes ? on both side?

    • 4 år siden
    1. JoseZurutuza
      Konkurrencevært
      • 4 år siden

      By tube we mean a full 2" square section on both ends.

      • 4 år siden

Vis flere kommentarer

Sådan kommer du i gang med konkurrencer

  • Opret din konkurrence

    Opret din konkurrence Hurtigt og nemt

  • Få tonsvis af indlæg

    Få tonsvis af indlæg Fra hele verden

  • Vælg det bedste indlæg

    Vælg det bedste indlæg Download filerne - Nemt!

Opret en konkurrence nu eller slut dig til os i dag!